* 'alpm' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] AHCI: add hw link power management support
  [libata] Link power management infrastructure

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] AHCI: fix newly introduced host-reset bug
  [libata] sata_nv: fix SWNCQ enabling
  libata: add MAXTOR 7V300F0/VA111900 to NCQ blacklist
  libata: no need to speed down if already at PIO0
  libata: relocate forcing PIO0 on reset
  pata_ns87415: define SUPERIO_IDE_MAX_RETRIES
  [libata] Address some checkpatch-spotted issues
  [libata] fix 'if(' and similar areas that lack whitespace
  libata: implement ata_wait_after_reset()
  libata: track SLEEP state and issue SRST to wake it up
  libata: relocate and fix post-command processing

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (22 commits)
  Fix ethernet multicast for ucc_geth.
  netdrvr/pcmcia: use IRQ_TYPE_DYNAMIC_SHARING flag for irq.Attributes.
  FEC - fast ethernet controller for mpc52xx
  ehea: add kexec support
  e1000e: Remove legacy jumbo frame receive code
  e1000e: Re-enable SECRC - crc stripping
  e1000e: Fix PBA calculation for jumbo frame packets
  e1000e: Fix jumbo frame receive code.
  drivers/net/irda/au1k_ir: fix obvious irq handler bugs
  ipg: Kconfig whitepaces/tab damages
  ipg: missing Kconfig dependency
  r8169: remove poll_locked logic
  r8169: napi config
  [PATCH] iwl3945: fix direct scan problem
  [PATCH] iwl3945: cancel scan on rxon command
  [PATCH] iwl4965: fix scan problem
  [PATCH] iwl4965: fix driver hang related to hardware scan
  [PATCH] iwlwifi: fix sending probe request in iwl 4965
  [PATCH] rtl8187: Allow multicast frames
  [PATCH] b43/b43legacy: jiffies_round -> jiffies_round_relative
  ...

* 'warnings-upstream' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6:
  [ISDN] capidrv: address two longstanding warnings

This patch will set the correct bits to turn on Aggressive
Link Power Management (ALPM) for the ahci driver.  This
will cause the controller and disk to negotiate a lower
power state for the link when there is no activity (see
the AHCI 1.x spec for details).  This feature is mutually
exclusive with Hot Plug, so when ALPM is enabled, Hot Plug
is disabled.  ALPM will be enabled by default, but it is
settable via the scsi host syfs interface.  Possible
settings for this feature are:

Setting         Effect
----------------------------------------------------------
min_power       ALPM is enabled, and link set to enter
                lowest power state (SLUMBER) when idle
                Hot plug not allowed.

max_performance ALPM is disabled, Hot Plug is allowed

medium_power    ALPM is enabled, and link set to enter
                second lowest power state (PARTIAL) when
                idle.  Hot plug not allowed.
Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Device Initiated Power Management, which is defined
in SATA 2.5 can be enabled for disks which support it.
This patch enables DIPM when the user sets the link
power management policy to "min_power".

Additionally, libata drivers can define a function
(enable_pm) that will perform hardware specific actions to
enable whatever power management policy the user set up
for Host Initiated Power management (HIPM).
This power management policy will be activated after all
disks have been enumerated and intialized.  Drivers should
also define disable_pm, which will turn off link power
management, but not change link power management policy.

Documentation/scsi/link_power_management_policy.txt has additional
information.
Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

mm/nommu.c needs to #include linux/module.h for it to understand EXPORT_*()
macros.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  compat_ioctl: fix block device compat ioctl regression
  [BLOCK] Fix bad sharing of tag busy list on queues with shared tag maps
  Fix a build error when BLOCK=n
  block: use lock bitops for the tag map.
  cciss: update copyright notices
  cfq_get_queue: fix possible NULL pointer access
  blk_sync_queue() should cancel request_queue->unplug_work
  cfq_exit_queue() should cancel cfq_data->unplug_work
  block layer: remove a unused argument of drive_stat_acct()

* 'sg' of git://git.kernel.dk/linux-2.6-block:
  Correction of "Update drivers to use sg helpers" patch for IMXMMC driver
  sg_init_table() should use unsigned loop index variable
  sg_last() should use unsigned loop index variable
  Initialise scatter/gather list in sg driver
  Initialise scatter/gather list in ata_sg_setup
  x86: fix pci-gart failure handling
  SG: s390-scsi: missing size parameter in zfcp_address_to_sg()
  SG: clear termination bit in sg_chain()

* git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt:
  Quieten hrtimer printk: "Switched to high resolution mode .."
  timer_list: Fix printk format strings
  clockevents: unexport tick_nohz_get_sleep_length

The recent fix to host reset introduced a problem, whereby AHCI-enable
bit would be cleared upon reset, if it was not asserted prior to reset.

Unconditionally enable AHCI-enable bit.
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

a) for type B we should _not_ iounmap() acb->pmu; it's not ioremapped.
b) for type B we should iounmap() two regions we _do_ ioremap.
c) if ioremap() fails, we need to bail out (and clean up).
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use of ptrdiff_t in places like

-                       if (!access_ok(VERIFY_WRITE, u_tmp->rx_buf, u_tmp->len))
+                       if (!access_ok(VERIFY_WRITE, (u8 __user *)
+                                               (ptrdiff_t) u_tmp->rx_buf,
+                                               u_tmp->len))

is wrong; for one thing, it's a bad C (it's what uintptr_t is for; in general
we are not even promised that ptrdiff_t is large enough to hold a pointer,
just enough to hold a difference between two pointers within the same object).
For another, it confuses the fsck out of sparse.

Use unsigned long or uintptr_t instead.  There are several places misusing
ptrdiff_t; fixed.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

doh...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

initializing a field in data shared with the card with
cpu_to_le32(something) | 0x100000 is broken - the field is, indeed,
little-endian and we need cpu_to_le32() on both parts.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

driver still has serious portability problems
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

 - off by one in dmar_get_fault_reason() (maximal index in array is
   ARRAY_SIZE()-1, not ARRAY_SIZE())
 - NULL noise removal
 - __iomem annotation fix
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

nr_slabs is atomic_long_t, not atomic_t
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

rpcrdma stuff lacks endianness annotations for on-the-wire data.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

arch/i386/{Kconfig,Makefile}.cpu got moved
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Don't undef __i386__/__x86_64__ in uml anymore, make sure that (few) places
that required adjusting the ifdefs got those.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Adapted from patches by Kuan Lou @ NVIDIA and Bartlomiej Zolnierkiewicz.
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

The conversion of handlers to compat_blkdev_ioctl accidentally
disabled handling of most ioctl numbers on block devices because
of a typo. Fix the one line to enable it all again.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJens Axboe <axboe@carl.home.kernel.dk>

For the locking to work, only the tag map and tag bit map may be shared
(incidentally, I was just explaining this to Nick yesterday, but I
apparently didn't review the code well enough myself). But we also share
the busy list!  The busy_list must be queue private, or we need a
block_queue_tag covering lock as well.

So we have to move the busy_list to the queue. This'll work fine, and
it'll actually also fix a problem with blk_queue_invalidate_tags() which
will invalidate tags across all shared queues. This is a bit confusing,
the low level driver should call it for each queue seperately since
otherwise you cannot kill tags on just a single queue for eg a hard
drive that stops responding. Since the function has no callers
currently, it's not an issue.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

mm/filemap.c: In function '__filemap_fdatawrite_range':
mm/filemap.c:200: error: implicit declaration of function
'mapping_cap_writeback_dirty'

This happens when we don't use/have any block devices and a NFS root
filesystem is used.

mapping_cap_writeback_dirty() is defined in linux/backing-dev.h which
used to be provided in mm/filemap.c by linux/blkdev.h until commit
f5ff8422 (Fix warnings with
!CONFIG_BLOCK).
Signed-off-by: NEmil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

The block queue tag map can use lock bitops.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

This patch updates the copyright information for the cciss driver. It
includes extending the year to 2007 (how timely) and some minor corrections
deemed necessary by HP legal and the Open Source Review Board. Please
consider this patch for inclusion.
Signed-off-by: NMike Miller <mike.miller@hp.com>
--------------------------------------------------------------------------------
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

cfq_get_queue()->cfq_find_alloc_queue() can fail, check the returned value.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>

Note that this isn't a bug at the moment, since the regular IO path
does not call this path without __GFP_WAIT set. However, it could be a
future bug, so I've applied it.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

blk_sync_queue() cancels the timer, but forgets to cancel the work.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Spotted by Nick <gentuu@gmail.com>, perhaps explains the first trace in
http://bugzilla.kernel.org/show_bug.cgi?id=9180.

cfq_exit_queue() should cancel cfqd->unplug_work before freeing cfqd.
blk_sync_queue() seems unneeded, removed.

Q: why cfq_exit_queue() calls cfq_shutdown_timer_wq() twice?
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

The nr_sector argument of drive_stat_acct() is not used anymore since the read and write sectors statistics are now updated in end_that_request_first(). This patch removes the useless argument.
Signed-off-by: NJerome Marchand <jmarchan@redhat.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

MAXTOR 7V300F0/VA111900 does spurious NCQ completions.  Add it to
blacklist.  This problem is reported by Carsten Otto.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Cc: Carsten Otto <c-otto@gmx.de>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

After reset, transfer mode is always PIO0 regardless of
dev->xfer_mask.  Check dev->pio_mode before trying to slow down after
configuration failure.  This prevents bogus speed down before device
is actually configured.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Forcing PIO0 on reset was done inside ata_bus_softreset(), which is a
bit out of place as it should be applied to all resets - hard, soft
and implementation which don't use ata_bus_softreset().  Relocate it
such that...

* For new EH, it's done in ata_eh_reset() before calling prereset.

* For old EH, it's done before calling ap->ops->phy_reset() in
  ata_bus_probe().

This makes PIO0 forced after all resets.  Another difference is that
reset itself is done after PIO0 is forced.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Code copied from drivers/ide/pci/ns87415.c uses this, so copy the
definition from there as well.

Fixes the following build error:
  CC [M]  drivers/ata/pata_ns87415.o
drivers/ata/pata_ns87415.c: In function ‘ns87560_read_buggy’:
drivers/ata/pata_ns87415.c:228: error: ‘SUPERIO_IDE_MAX_RETRIES’ undeclared (first use in this function)
drivers/ata/pata_ns87415.c:228: error: (Each undeclared identifier is reported only once
drivers/ata/pata_ns87415.c:228: error: for each function it appears in.)
Signed-off-by: NFrank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

On certain device/controller combination, 0xff status is asserted
after reset and doesn't get cleared during 150ms post-reset wait.  As
0xff status is interpreted as no device (for good reasons), this can
lead to misdetection on such cases.

This patch implements ata_wait_after_reset() which replaces the 150ms
sleep and waits upto ATA_TMOUT_FF_WAIT if status is 0xff.
ATA_TMOUT_FF_WAIT is currently 800ms which is enough for
HHD424020F7SV00 to get detected but not enough for Quantum GoVault
drive which is known to take upto 2s.

Without parallel probing, spending 2s on 0xff port would incur too
much delay on ata_piix's which use 0xff to indicate empty port and
doesn't have SCR register, so GoVault needs to wait till parallel
probing.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>