Some filesystems go oops.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The driver dependencies on PCI have been removed.  This patch clears that
up in the Kconfig file
Signed-off-by: NKylene Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use ioread8 and iowrite8 as suggested.
Signed-off-by: NKylene Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add the necessary flush_schedule_work calls when canceling the timer.
Signed-off-by: NKylene Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This adds the FCC_PSMR_RMII defenition, which is used in fs_enet to enable
RMII mode.
Signed-off-by: NVitaly Bordug <vbordug@ru.mvista.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

On IPMI systems with BT interfaces, we don't start the kernel thread, so
smi_info->thread is NULL.  Test for NULL when stopping the thread, because
kthread_stop() doesn't, and an oops ensues otherwise.
Signed-off-by: NMatt Domsch <Matt_Domsch@dell.com>
Acked-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

2.6.14 has this exported, and reiser4 (at least) uses it.  Put things back
the way they were.
Signed-off-by: NVladimir V. Saveliev <vs@namesys.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

One issue with the RCU torture test is that the current error flagging can
be lost in dmesg.  This patch adds a "SUCCESS"/"FAILURE" string to the line
that flags the end of the test, where it can easily be seen with "dmesg |
tail" at the end of the test.  Also adds tests of architecture-specific
memory barriers -- or, more likely, of the RCU torture test itself.

Cc: <vatsa@in.ibm.com>
Signed-off-by: N"Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix copy-paste bug in ohci-ppc-soc.c(ohci_hcd_ppc_soc_drv_remove)
Signed-off-by: NAndrey Volkov <avolkov@varma-el.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Properly clear the memory, and set "pr->flags.power" only if a C2 or
deeper state is valid (to make the code match both the comment and
previous behaviour).

This fixes a boot-time lockup reported by Maneesh Soni when using
"maxcpus=1".
Acked-by: NManeesh Soni <maneesh@in.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The code Ben H added needs <linux/pci.h> for things like pci_dev, etc.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

make defconfig will now use arch/powerpc/configs/ppc64_defconfig
if running on a ppc64 system.  I need to add an
arch/powerpc/configs/ppc_defconfig sometime.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NPaul Mackerras <paulus@samba.org>

This makes 32-bit CHRP systems use the RTAS time-of-day routines if
available.  It fixes a bug in the RTAS time-of-day routines where they
were storing a 64-bit timebase value in an unsigned long by making
those variables u64.  Also, the direct-access time-of-day routines
had the wrong convention for the month and year in the struct rtc_time.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

pseries_dedicated_idle() was using __get_tb which used to be defined
in asm/delay.h.  Change it to use get_tb from asm/time.h, which is
in fact exactly the same thing.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This also deletes the now-unused Makefiles under arch/ppc64.

Both of the files moved over could use some merging, but for now I
have moved them as-is and arranged for them to be used only in 64-bit
kernels.  For 32-bit kernels we still use arch/ppc/kernel/idle.c and
drivers/char/generic_nvram.c as before.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The config option SPAN_OTHER_NODES was created so that we could
make pSeries numa layouts work within the DISCONTIG memory model.
Now that DISCONTIG has been replaced by SPARSEMEM, we can eliminate
this option.

I'll be sending a separate patch to Andrew to remove the arch
independent code as pSeries was the only arch that needed this.
Signed-off-by: NMike Kravetz <kravetz@us.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This patch merges align.c, the result isn't quite what was in ppc64 nor
what was in ppc32 :) It should implement all the functionalities of both
though. Kumar, since you played with that in the past, I suppose you
have some test cases for verifying that it works properly before I dig
out the 601 machine ? :)

Since it's likely that I won't be able to test all scenario, code
inspection is much welcome.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

My earlier merge of delay.h introduced a timebase-based udelay for
32-bit machines but also broke the 601, which doesn't have the
timebase register.  This fixes it by using the 601's RTC register on
the 601, and also moves __delay() and udelay() to be out-of-line in
arch/powerpc/kernel/time.c.  These functions aren't really performance
critical, after all.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

When we moved things around in irq.h seq_file became an issue.  Fix
warnings related to its usage.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The SVRs for MPC8343/E were incorrect and really the SVRs
for MPC8347/E.
Signed-off-by: NDavid Updegraff <dave@cray.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Reserve the Maple RTC I/O resource.  Needed now we use genrtc.
Signed-off-by: NSegher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Replacing the string labels with numbers saves 117 bytes in the final zImage.
These local labels are not discared.
Signed-off-by: NOlaf Hering <olh@suse.de>

 arch/powerpc/boot/crt0.S |   23 +++++++++++------------
 1 files changed, 11 insertions(+), 12 deletions(-)
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The fix to topology.h (5cfccd7f) seems to have
a typeo, struct sched_domain has an idle_idx member but not an idle_id
member. I assume this is the fix.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

When we moved things around in irq.h seq_file became an issue.  Fix
warnings related to its usage.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Revert: 8225ccba

Based upon a report by Yan Zheng.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On Thu, 17 Nov 2005, David Gómez wrote:

> I found out that if i select NET_CLS_ROUTE4, save my changes and exit
> menuconfig, execute again make menuconfig and go to QoS options, then the new
> available options are visible. So menuconfig has some problem refreshing
> contents :?

No, they were there before too, but you have to go up one level to see 
them.

It's better in 2.6.15-rc1-git5, but the menu structure is still a little 
messed up, the patch below properly indents all menu entries.
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Noticed by Olaf Hering.

The comparisons want a u8 here (the data type on the left-hand branch
is a u8 structure member, and the constant on the right-hand branch is
"~((u8) 128)"), but C turns it into an integer so we get:

net/llc/llc_c_ac.c: In function `llc_conn_ac_inc_npta_value':
net/llc/llc_c_ac.c:998: warning: comparison is always true due to limited range of data type
net/llc/llc_c_ac.c:999: warning: large integer implicitly truncated to unsigned type

Fix this up by explicitly recasting the right-hand branch constant
into a "u8" once more.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since we've converted the ftp/irc/tftp helpers to use the new
module_parm_array() some time ago, we ware accidentially using signed data
types - thus preventing those modules from being used on ports >= 32768.

This patch fixes it by using 'ushort' module parameters.

Thanks to Jan Nijs for reporting this bug.
Signed-off-by: NHarald Welte <laforge@netfilter.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

So things like on-line resizing et al. work.

Based almost entirely upon a patch by Guido Gnther <agx@sigxcpu.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is a compile error that crept in with the last patch of
TCP patches.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We must reassign z before looping through the zones kicking kswapd,
since it will be NULL if we hit an OOM condition and jump back to the
beginning again. 'z' is initially assigned before the restart: label. So
move the restart label up a little.
Signed-off-by: NJens Axboe <axboe@suse.de>

Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It was causing too many problems, and this is not the proper type of
driver for this device.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This lets us remove a lot of code in the drivers that were all checking
the same thing.  It also found some bugs in a few of the drivers, which
has been fixed up.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix an error in the OHCI lh7a404 driver after the platform device
conversion.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This small patch adds a device ID used by older Maxtor OneTouch drives
(the ones with blue face-plate instead of the fancy silver one used in
newer models). The button on those drives works well with the current
driver.

From: Antti Andreimann <Antti.Andreimann@mail.ee>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>