- 09 7月, 2011 1 次提交
-
-
由 Vinicius Costa Gomes 提交于
This adds support for generating and distributing all the keys specified in the third phase of SMP. This will make possible to re-establish secure connections, resolve private addresses and sign commands. For now, the values generated are random. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 08 7月, 2011 5 次提交
-
-
由 Mat Martineau 提交于
The ERTM receive buffer is now handled in a way that does not require the busy queue and the associated polling code. Signed-off-by: NMat Martineau <mathewm@codeaurora.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Mat Martineau 提交于
This change moves most L2CAP ERTM receive buffer handling out of the L2CAP core and in to the socket code. It's up to the higher layer (the socket code, in this case) to tell the core when its buffer is full or has space available. The recv op should always accept incoming ERTM data or else the connection will go down. Within the socket layer, an skb that does not fit in the socket receive buffer will be temporarily stored. When the socket is read from, that skb will be placed in the receive buffer if possible. Once adequate buffer space becomes available, the L2CAP core is informed and the ERTM local busy state is cleared. Receive buffer management for non-ERTM modes is unchanged. Signed-off-by: NMat Martineau <mathewm@codeaurora.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Mat Martineau 提交于
The local busy state is entered and exited based on buffer status in the socket layer (or other upper layer). This change is in preparation for general buffer status reports from the socket layer, which will then be used to change the local busy status. Signed-off-by: NMat Martineau <mathewm@codeaurora.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andre Guedes 提交于
All threads running in process context should disable local bottom halve before locking hdev->lock. This patch fix the following message generated when Bluetooh module is loaded with enable_mgmt=y (CONFIG_PROVE_LOCKING enabled). [ 107.880781] ================================= [ 107.881631] [ INFO: inconsistent lock state ] [ 107.881631] 2.6.39+ #1 [ 107.881631] --------------------------------- [ 107.881631] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 107.881631] rcuc0/7 [HC0[0]:SC1[3]:HE1:SE0] takes: [ 107.881631] (&(&hdev->lock)->rlock){+.?...}, at: [<ffffffffa0012c8d>] mgmt_set_local_name_complete+0x84/0x10b [bluetooth] [ 107.881631] {SOFTIRQ-ON-W} state was registered at: [ 107.881631] [<ffffffff8105188b>] __lock_acquire+0x347/0xd52 [ 107.881631] [<ffffffff810526ac>] lock_acquire+0x8a/0xa7 [ 107.881631] [<ffffffff812b3758>] _raw_spin_lock+0x2c/0x3b [ 107.881631] [<ffffffffa0011cc2>] mgmt_control+0xd4d/0x175b [bluetooth] [ 107.881631] [<ffffffffa0013275>] hci_sock_sendmsg+0x97/0x293 [bluetooth] [ 107.881631] [<ffffffff8121940c>] sock_aio_write+0x126/0x13a [ 107.881631] [<ffffffff810a35fa>] do_sync_write+0xba/0xfa [ 107.881631] [<ffffffff810a3beb>] vfs_write+0xaa/0xca [ 107.881631] [<ffffffff810a3d80>] sys_write+0x45/0x69 [ 107.881631] [<ffffffff812b4892>] system_call_fastpath+0x16/0x1b [ 107.881631] irq event stamp: 2100876 [ 107.881631] hardirqs last enabled at (2100876): [<ffffffff812b40d4>] restore_args+0x0/0x30 [ 107.881631] hardirqs last disabled at (2100875): [<ffffffff812b3f6a>] save_args+0x6a/0x70 [ 107.881631] softirqs last enabled at (2100862): [<ffffffff8106a805>] rcu_cpu_kthread+0x2b5/0x2e2 [ 107.881631] softirqs last disabled at (2100863): [<ffffffff812b56bc>] call_softirq+0x1c/0x26 [ 107.881631] [ 107.881631] other info that might help us debug this: [ 107.881631] Possible unsafe locking scenario: [ 107.881631] [ 107.881631] CPU0 [ 107.881631] ---- [ 107.881631] lock(&(&hdev->lock)->rlock); [ 107.881631] <Interrupt> [ 107.881631] lock(&(&hdev->lock)->rlock); [ 107.881631] [ 107.881631] *** DEADLOCK *** [ 107.881631] [ 107.881631] 1 lock held by rcuc0/7: [ 107.881631] #0: (hci_task_lock){++.-..}, at: [<ffffffffa0008353>] hci_rx_task+0x49/0x2f3 [bluetooth] [ 107.881631] [ 107.881631] stack backtrace: [ 107.881631] Pid: 7, comm: rcuc0 Not tainted 2.6.39+ #1 [ 107.881631] Call Trace: [ 107.881631] <IRQ> [<ffffffff812ae901>] print_usage_bug+0x1e7/0x1f8 [ 107.881631] [<ffffffff8100a796>] ? save_stack_trace+0x27/0x44 [ 107.881631] [<ffffffff8104fc3f>] ? print_irq_inversion_bug.part.26+0x19a/0x19a [ 107.881631] [<ffffffff810504bb>] mark_lock+0x106/0x258 [ 107.881631] [<ffffffff81051817>] __lock_acquire+0x2d3/0xd52 [ 107.881631] [<ffffffff8102be73>] ? vprintk+0x3ab/0x3d7 [ 107.881631] [<ffffffff810526ac>] lock_acquire+0x8a/0xa7 [ 107.881631] [<ffffffffa0012c8d>] ? mgmt_set_local_name_complete+0x84/0x10b [bluetooth] [ 107.881631] [<ffffffff81052615>] ? lock_release+0x16c/0x179 [ 107.881631] [<ffffffff812b3952>] _raw_spin_lock_bh+0x31/0x40 [ 107.881631] [<ffffffffa0012c8d>] ? mgmt_set_local_name_complete+0x84/0x10b [bluetooth] [ 107.881631] [<ffffffffa0012c8d>] mgmt_set_local_name_complete+0x84/0x10b [bluetooth] [ 107.881631] [<ffffffffa000d3fe>] hci_event_packet+0x122b/0x3e12 [bluetooth] [ 107.881631] [<ffffffff81050658>] ? mark_held_locks+0x4b/0x6d [ 107.881631] [<ffffffff812b3cff>] ? _raw_spin_unlock_irqrestore+0x40/0x4d [ 107.881631] [<ffffffff810507b9>] ? trace_hardirqs_on_caller+0x13f/0x172 [ 107.881631] [<ffffffff812b3d07>] ? _raw_spin_unlock_irqrestore+0x48/0x4d [ 107.881631] [<ffffffffa00083d2>] hci_rx_task+0xc8/0x2f3 [bluetooth] [ 107.881631] [<ffffffff8102f836>] ? __local_bh_enable+0x90/0xa4 [ 107.881631] [<ffffffff8102f5a9>] tasklet_action+0x87/0xe6 [ 107.881631] [<ffffffff8102fa11>] __do_softirq+0x9f/0x13f [ 107.881631] [<ffffffff812b56bc>] call_softirq+0x1c/0x26 [ 107.881631] <EOI> [<ffffffff810033b8>] ? do_softirq+0x46/0x9a [ 107.881631] [<ffffffff8106a805>] ? rcu_cpu_kthread+0x2b5/0x2e2 [ 107.881631] [<ffffffff8102f906>] _local_bh_enable_ip+0xac/0xc9 [ 107.881631] [<ffffffff8102f93b>] local_bh_enable+0xd/0xf [ 107.881631] [<ffffffff8106a805>] rcu_cpu_kthread+0x2b5/0x2e2 [ 107.881631] [<ffffffff81041586>] ? __init_waitqueue_head+0x46/0x46 [ 107.881631] [<ffffffff8106a550>] ? rcu_yield.constprop.42+0x98/0x98 [ 107.881631] [<ffffffff81040f0a>] kthread+0x7f/0x87 [ 107.881631] [<ffffffff812b55c4>] kernel_thread_helper+0x4/0x10 [ 107.881631] [<ffffffff812b40d4>] ? retint_restore_args+0x13/0x13 [ 107.881631] [<ffffffff81040e8b>] ? __init_kthread_worker+0x53/0x53 [ 107.881631] [<ffffffff812b55c0>] ? gs_change+0x13/0x13 Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andre Guedes 提交于
Since hdev->lock may be acquired by threads runnning in interrupt context, all threads running in process context should disable local bottom halve before locking hdev->lock. This can be done by using hci_dev_lock_bh macro. This way, we avoid potencial deadlocks like this one reported by CONFIG_PROVE_LOCKING=y. [ 304.788780] ================================= [ 304.789686] [ INFO: inconsistent lock state ] [ 304.789686] 2.6.39+ #1 [ 304.789686] --------------------------------- [ 304.789686] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 304.789686] ksoftirqd/0/3 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 304.789686] (&(&hdev->lock)->rlock){+.?...}, at: [<ffffffffa000bbfe>] hci_conn_check_pending+0x38/0x76 [bluetooth] [ 304.789686] {SOFTIRQ-ON-W} state was registered at: [ 304.789686] [<ffffffff8105188b>] __lock_acquire+0x347/0xd52 [ 304.789686] [<ffffffff810526ac>] lock_acquire+0x8a/0xa7 [ 304.789686] [<ffffffff812b3758>] _raw_spin_lock+0x2c/0x3b [ 304.789686] [<ffffffffa0009cf0>] hci_blacklist_del+0x1f/0x8a [bluetooth] [ 304.789686] [<ffffffffa00139fd>] hci_sock_ioctl+0x2d9/0x314 [bluetooth] [ 304.789686] [<ffffffff812197d8>] sock_ioctl+0x1f2/0x214 [ 304.789686] [<ffffffff810b0fd6>] do_vfs_ioctl+0x46c/0x4ad [ 304.789686] [<ffffffff810b1059>] sys_ioctl+0x42/0x65 [ 304.789686] [<ffffffff812b4892>] system_call_fastpath+0x16/0x1b [ 304.789686] irq event stamp: 9768 [ 304.789686] hardirqs last enabled at (9768): [<ffffffff812b40d4>] restore_args+0x0/0x30 [ 304.789686] hardirqs last disabled at (9767): [<ffffffff812b3f6a>] save_args+0x6a/0x70 [ 304.789686] softirqs last enabled at (9726): [<ffffffff8102fa9b>] __do_softirq+0x129/0x13f [ 304.789686] softirqs last disabled at (9739): [<ffffffff8102fb33>] run_ksoftirqd+0x82/0x133 [ 304.789686] [ 304.789686] other info that might help us debug this: [ 304.789686] Possible unsafe locking scenario: [ 304.789686] [ 304.789686] CPU0 [ 304.789686] ---- [ 304.789686] lock(&(&hdev->lock)->rlock); [ 304.789686] <Interrupt> [ 304.789686] lock(&(&hdev->lock)->rlock); [ 304.789686] [ 304.789686] *** DEADLOCK *** [ 304.789686] [ 304.789686] 1 lock held by ksoftirqd/0/3: [ 304.789686] #0: (hci_task_lock){++.-..}, at: [<ffffffffa0008353>] hci_rx_task+0x49/0x2f3 [bluetooth] [ 304.789686] [ 304.789686] stack backtrace: [ 304.789686] Pid: 3, comm: ksoftirqd/0 Not tainted 2.6.39+ #1 [ 304.789686] Call Trace: [ 304.789686] [<ffffffff812ae901>] print_usage_bug+0x1e7/0x1f8 [ 304.789686] [<ffffffff8100a796>] ? save_stack_trace+0x27/0x44 [ 304.789686] [<ffffffff8104fc3f>] ? print_irq_inversion_bug.part.26+0x19a/0x19a [ 304.789686] [<ffffffff810504bb>] mark_lock+0x106/0x258 [ 304.789686] [<ffffffff812b40d4>] ? retint_restore_args+0x13/0x13 [ 304.789686] [<ffffffff81051817>] __lock_acquire+0x2d3/0xd52 [ 304.789686] [<ffffffff8102be73>] ? vprintk+0x3ab/0x3d7 [ 304.789686] [<ffffffff812ae126>] ? printk+0x3c/0x3e [ 304.789686] [<ffffffff810526ac>] lock_acquire+0x8a/0xa7 [ 304.789686] [<ffffffffa000bbfe>] ? hci_conn_check_pending+0x38/0x76 [bluetooth] [ 304.789686] [<ffffffff811601c6>] ? __dynamic_pr_debug+0x10c/0x11a [ 304.789686] [<ffffffff812b3758>] _raw_spin_lock+0x2c/0x3b [ 304.789686] [<ffffffffa000bbfe>] ? hci_conn_check_pending+0x38/0x76 [bluetooth] [ 304.789686] [<ffffffffa000bbfe>] hci_conn_check_pending+0x38/0x76 [bluetooth] [ 304.789686] [<ffffffffa000c561>] hci_event_packet+0x38e/0x3e12 [bluetooth] [ 304.789686] [<ffffffff81052615>] ? lock_release+0x16c/0x179 [ 304.789686] [<ffffffff812b3b41>] ? _raw_read_unlock+0x23/0x27 [ 304.789686] [<ffffffffa0013e7f>] ? hci_send_to_sock+0x179/0x188 [bluetooth] [ 304.789686] [<ffffffffa00083d2>] hci_rx_task+0xc8/0x2f3 [bluetooth] [ 304.789686] [<ffffffff8102f5a9>] tasklet_action+0x87/0xe6 [ 304.789686] [<ffffffff8102fa11>] __do_softirq+0x9f/0x13f [ 304.789686] [<ffffffff8102fb33>] run_ksoftirqd+0x82/0x133 [ 304.789686] [<ffffffff8102fab1>] ? __do_softirq+0x13f/0x13f [ 304.789686] [<ffffffff81040f0a>] kthread+0x7f/0x87 [ 304.789686] [<ffffffff812b55c4>] kernel_thread_helper+0x4/0x10 [ 304.789686] [<ffffffff812b40d4>] ? retint_restore_args+0x13/0x13 [ 304.789686] [<ffffffff81040e8b>] ? __init_kthread_worker+0x53/0x53 [ 304.789686] [<ffffffff812b55c0>] ? gs_change+0x13/0x13 Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 07 7月, 2011 5 次提交
-
-
由 Andre Guedes 提交于
The enable_smp parameter is no longer needed. It can be replaced by checking lmp_host_le_capable. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andre Guedes 提交于
Since we have the extended LMP features properly implemented, we should check the LMP_HOST_LE bit to know if the host supports LE. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andre Guedes 提交于
This patch adds a new module parameter to enable/disable host LE support. By default host LE support is disabled. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andre Guedes 提交于
This patch adds a handler to Write LE Host Supported command complete events. Once this commands has completed successfully, we should read the extended LMP features and update the extfeatures field in hci_dev. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andre Guedes 提交于
This new field holds the extended LMP features value. Some LE mechanism such as discovery procedure needs to read the extended LMP features to work properly. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 02 7月, 2011 2 次提交
-
-
由 Mat Martineau 提交于
Even when the received tx_seq is expected, the frame still needs to be dropped if the TX window is exceeded or the receiver is in the local busy state. Signed-off-by: NMat Martineau <mathewm@codeaurora.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 01 7月, 2011 4 次提交
-
-
由 Joe Perches 提交于
Add a local logging function to emit bluetooth specific messages. Using vsprintf extension %pV saves code/text space. Convert the current BT_INFO and BT_ERR macros to use bt_printk. Remove __func__ from BT_ERR macro (and the uses). Prefix "Bluetooth: " to BT_ERR Remove __func__ from BT_DBG as function can be prefixed when using dynamic_debug. With allyesconfig: text data bss dec hex filename 129956 8632 36096 174684 2aa5c drivers/bluetooth/built-in.o.new2 134402 8632 36064 179098 2bb9a drivers/bluetooth/built-in.o.old 14778 1012 3408 19198 4afe net/bluetooth/bnep/built-in.o.new2 15067 1012 3408 19487 4c1f net/bluetooth/bnep/built-in.o.old 346595 19163 86080 451838 6e4fe net/bluetooth/built-in.o.new2 353751 19163 86064 458978 700e2 net/bluetooth/built-in.o.old 18483 1172 4264 23919 5d6f net/bluetooth/cmtp/built-in.o.new2 18927 1172 4264 24363 5f2b net/bluetooth/cmtp/built-in.o.old 19237 1172 5152 25561 63d9 net/bluetooth/hidp/built-in.o.new2 19581 1172 5152 25905 6531 net/bluetooth/hidp/built-in.o.old 59461 3884 14464 77809 12ff1 net/bluetooth/rfcomm/built-in.o.new2 61206 3884 14464 79554 136c2 net/bluetooth/rfcomm/built-in.o.old with x86 defconfig (and just bluetooth): $ size net/bluetooth/built-in.o.defconfig.* text data bss dec hex filename 66358 933 100 67391 1073f net/bluetooth/built-in.o.defconfig.new 66643 933 100 67676 1085c net/bluetooth/built-in.o.defconfig.old Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Joe Perches 提交于
Make it easier to use more normal logging styles later. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Mat Martineau 提交于
ERTM timeouts are defined in milliseconds, but need to be converted to jiffies when passed to mod_timer(). Signed-off-by: NMat Martineau <mathewm@codeaurora.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Mat Martineau 提交于
Signed-off-by: NMat Martineau <mathewm@codeaurora.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 28 6月, 2011 1 次提交
-
-
由 Randy Dunlap 提交于
Recent changes to hci_core.c use crypto interfaces, so select CRYPTO to make sure that those interfaces are present. Fixes these build errors when CRYPTO is not enabled: net/built-in.o: In function `hci_register_dev': (.text+0x4cf86): undefined reference to `crypto_alloc_base' net/built-in.o: In function `hci_unregister_dev': (.text+0x4f912): undefined reference to `crypto_destroy_tfm' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 25 6月, 2011 1 次提交
-
-
由 Stephen Rothwell 提交于
net/bluetooth/smp.c: In function 'smp_e': net/bluetooth/smp.c:49:21: error: storage size of 'sg' isn't known net/bluetooth/smp.c:67:2: error: implicit declaration of function 'sg_init_one' net/bluetooth/smp.c:49:21: warning: unused variable 'sg' Caused by commit d22ef0bc ("Bluetooth: Add LE SMP Cryptoolbox functions"). Missing include file, presumably. This batch has been in the bluetooth tree since June 14, so it may have been exposed by the removal of linux/mm.h from netdevice.h ... Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 22 6月, 2011 1 次提交
-
-
由 Vinicius Costa Gomes 提交于
When the connection is ready we should set the connection to CONNECTED so userspace can use it. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 21 6月, 2011 2 次提交
-
-
由 Vinicius Costa Gomes 提交于
We already have access to the chan, we don't have to access the socket to get its imtu. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Vinicius Costa Gomes 提交于
We should not try to do any other type of configuration for LE links when they become ready. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 18 6月, 2011 1 次提交
-
-
由 Gustavo F. Padovan 提交于
There was no unlock call on the errors path Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 17 6月, 2011 4 次提交
-
-
由 Gustavo F. Padovan 提交于
Instead of setting bits manually we use set_bit, test_bit, etc. Also remove L2CAP_ prefix from macros. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
Instead of making the bit operations manually, we now use set_bit, test_bit, etc. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Antti Julku 提交于
Management interface commands for blocking and unblocking devices. Signed-off-by: NAntti Julku <antti.julku@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Antti Julku 提交于
Move blacklisting functions to hci_core.c, so that they can be used by both management interface and hci socket interface. Signed-off-by: NAntti Julku <antti.julku@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 16 6月, 2011 1 次提交
-
-
由 Ilia Kolomisnky 提交于
In hci_conn_security ( which is used during L2CAP connection establishment ) test for HCI_CONN_ENCRYPT_PEND state also sets this state, which is bogus and leads to connection time-out on L2CAP sockets in certain situations (especially when using non-ssp devices ) Signed-off-by: NIlia Kolomisnky <iliak@ti.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 15 6月, 2011 3 次提交
-
-
由 Vinicius Costa Gomes 提交于
This patch implements a check in smp cmd pairing request and pairing response to verify if encryption key maximum size is compatible in both slave and master when SMP Pairing is requested. Keys are also masked to the correct negotiated size. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: NAnderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Vinicius Costa Gomes 提交于
This patch adds support for disconnecting the link when SMP procedure takes more than 30 seconds. SMP begins when either the Pairing Request command is sent or the Pairing Response is received, and it ends when the link is encrypted (or terminated). Vol 3, Part H Section 3.4. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
When authentication completes we shouldn't blindly accept any pending L2CAP connect requests. If the socket has the defer_setup feature enabled it should still wait for user space acceptance of the connect request. The issue only happens for non-SSP connections since with SSP the L2CAP Connect request may not be sent for non-SDP PSMs before authentication has completed successfully. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 14 6月, 2011 9 次提交
-
-
由 Anderson Lizardo 提交于
The "dc" variable is initialized but not passed to hci_send_cmd(). Signed-off-by: NAnderson Lizardo <anderson.lizardo@openbossa.org> Signed-off-by: NBruna Moreira <bruna.moreira@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Vinicius Costa Gomes 提交于
This patch implements a simple version of the SMP Pairing Features exchange procedure (Vol. 3 Part H, Section 2.3.5.1). For now, everything that would cause a Pairing Method different of Just Works to be chosen is rejected. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Vinicius Costa Gomes 提交于
Before we are able to do a proper exchange of pairing parameters, we need a unified way of building pairing requests and responses. For IO Capability we use the value that was set by userspace, using the management interface. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Vinicius Costa Gomes 提交于
As the default security level (BT_SECURITY_SDP) doesn't make sense for LE links, initialize LE links with something that makes sense. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Vinicius Costa Gomes 提交于
This adds support for resuming the user space traffic when SMP negotiation is complete. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Vinicius Costa Gomes 提交于
Now that these commands are sent to the controller we can use hcidump to verify that the correct values are produced. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Vinicius Costa Gomes 提交于
This adds support for starting SMP Phase 2 Encryption, when the initial SMP negotiation is successful. This adds the LE Start Encryption and LE Long Term Key Request commands and related events. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Anderson Briglia 提交于
This patch includes support for generating and sending the random value used to produce the confirmation value. Signed-off-by: NAnderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Anderson Briglia 提交于
This patch adds initial support for verifying the confirmation value that the remote side has sent. Signed-off-by: NAnderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-