Let general purpose I2C/SMBus bus drivers add SPD to their class. Once
this is done, we will be able to tell the eeprom driver to only probe
for SPD EEPROMs and similar on these buses.

Note that I took a conservative approach here, adding I2C_CLASS_SPD to
many drivers that have no idea whether they can host SPD EEPROMs or not.
This is to make sure that the eeprom driver doesn't stop probing buses
where SPD EEPROMs or equivalent live.

So, bus driver maintainers and users should feel free to remove the SPD
class from drivers those buses never have SPD EEPROMs or they don't
want the eeprom driver to bind to them. Likewise, feel free to add the
SPD class to any bus driver I might have missed.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Bugfixes to the i2c-cpm driver

- enable correct interrupts (I2CER_TXE instead of I2CER_BUSY)
- replace forgotten iic with i2c
- prefix debug-output on init with 0x and add frequency
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Acked-by: NJochen Friedrich <jochen@scram.de>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

This driver uses the port of 2.4 code from Vitaly Bordug
<vitb@kernel.crashing.org> and the actual algorithm used by the i2c
driver of the DBox code on cvs.tuxboc.org from Felix Domke
(tmbinc@gmx.net) and Gillem (htoa@gmx.net) converted to an
of_platform_driver. Tested on CPM1 (MPC823 on dbox2 hardware) and
CPM2 (MPC8272).
Signed-off-by: NJochen Friedrich <jochen@scram.de>
Tested-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

New i2c bus driver for the Intel SCH chipsets (AF82US15W, AF82US15L,
AF82UL11L).
Signed-off-by: NAlek Du <alek.du@intel.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Fix errorcode to be more descriptive when ioremap fails.
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Many PC SMBus host controller drivers don't properly handle the case
where they are requested to achieve a transaction they do not support.
Update them so that the consistently print a warning message and
return a single error value in this case.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

The i2c-piix4 driver was used recently as a model to write a new SMBus
host controller driver and this made me realize that the code of this
old driver wasn't exactly good. So, here are many cleanups and minor
fixes to this driver, so that these minor mistakes aren't duplicated
again:

* Delete unused structure.
* Delete needless forward function declaration.
* Properly announce the SMBus host controller as we find it.
* Spell it SMBus not SMB.
* Return -EBUSY instead of -ENODEV when the I/O region is already in
  use.
* Drop useless masks on the 7-bit address and the R/W bit.
* Reject block transaction requests with an invalid block length.
* Check and report block transaction replies with an invalid block
  length.
* Delete a useless comment.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Tighten error paths used by various i2c adapters (mostly x86) so
they return real fault/errno codes instead of a "-1" (which is
most often interpreted as "-EPERM").  Build tested, with eyeball
review.

One minor initial goal is to have adapters consistently return
the code "-ENXIO" when addressing a device doesn't get an ACK
response, at least in the probe paths where they are already
good at stifling related logspam.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

The list of I2C/SMBus bus drivers is growing and it is sometimes
difficult for the users to figure out what drivers they should enable.
By grouping the drivers by type, I hope to make the selection easier.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Since only a few Blackfins lack TWI, just list them in a depends
statement.
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

This patch contains the scheduled removal of i2c-i810, i2c-prosavage
and i2c-savage4.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Just like the Tyan S4882, the S4985 uses a multiplexer to give access
to all 16 memory module SPD EEPROMs. This specific i2c-nforce2-s4985
driver adds support for this. It is heavily based on the older
i2c-amd756-s4882 driver.

As more mainboards will use multiplexer chips, we will have to find a
way to support them without having to write a new specfic driver for
each. The recent changes to the i2c subsystem should help us, and the
new gpio subsystem might help, too.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

If an interrupt happens before an I2c master read/write,
complete is called on uninitialized structure.
Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: NKevin Hilman <khilman@mvista.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

If wait_for_completion_interruptible_timeout exits due
to a signal, the i2c bus was locking up.
Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: NKevin Hilman <khilman@mvista.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Interrupts are enabled at the point where the DAVINCI_I2C_IVR_REG is read,
so unless an interrupt happened just at that moment, no interrupt would be
pending. Even though documentation implies you should do this, I see no
reason. If slave support is added, this read would cause a hard to
reproduce bug.
Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: NKevin Hilman <khilman@mvista.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Previously the dev_dbg only printed if no error.
Printing also on an error is more useful
Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: NKevin Hilman <khilman@mvista.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Ensure psc value gives a clock between 7-12 MHz
Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: NKevin Hilman <khilman@mvista.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Add a MODULE_ALIAS() statement for the i2c-s3c2410 controller
to ensure that it can be autoloaded on the S3C2440 systems that
we support.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

The driver should be returning -ENXIO for transfers that do not
pass the initial address byte stage.

Note, also small tidyups to the driver comments in the area.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

We should check for the reception of an ACK after transmitting each
data byte. The address send has been correctly checking this, but the
data write byte state should have also been checking for these failures.

As part of the same fix, we remove the ACK checking from the receive
path where it should not have been checking for an ACK which our hardware
was sending.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

The i2c-amd756 driver pretends to support SMBus process call
transactions but actually does not. Fix it.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

There is a strange chip at 0x2e on the second SMBus channel of the
DFI Lanparty NF4 Expert motherboard. Accessing the chip reboots the
system. As there's nothing interesting on this SMBus channel, the
easiest and safest thing to do is to disable it on that board.

This is a better fix to bug #5889 than the it87 driver update that was
done originally:
http://bugzilla.kernel.org/show_bug.cgi?id=5889Signed-off-by: NJean Delvare <khali@linux-fr.org>

The Alchemy platform code registers the SMBus device using the virtual
address of its registers instead of the physical one -- fix this, taking
into account that actually the whole megabyte is decoded by any of the
programmable serial controllers (one of which is SMBus), and that all the
Alchemy peripherals are directly mappable into KSEG1 kernel space and
therefore ioremap() call would just boil down to CKSEG1ADDR() invocation.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The i2c_sibyte_add_bus() function is not called, nor meant to, from 
outside, so mark it as static; fixing a sparse warning too.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

The frequency may have been once hardcoded to 100 kHz, but currently it is
passed as an argument to i2c_sibyte_add_bus(), so update the comment to
match code.  While at it, reformat a nearby comment for consistency.  No
functional changes.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

We had a report that running sensors-detect on a Sapphire AM2RD790
motherbord killed the CPU. While the exact cause is still unknown,
I'd rather play it safe and prevent any access to the SMBus on that
machine by not letting the i2c-piix4 driver attach to the SMBus host
device on that machine. Also blacklist a similar board made by DFI.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Per the PIIX4 errata, there maybe a delay between setting the
start bit in the Smbus Host Controller Register and the transaction
actually starting. If the driver doesn't delay long enough, it
may appear that the transaction is complete when actually it
hasn't started, this may lead to bus collisions.

While 1 ms appears to be enough for most chips, the ServerWorks CSB5
wants 2 ms.
Signed-off-by: NDavid Milburn <dmilburn@redhat.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Alter the mpc i2c driver to use the NO_IRQ symbol instead of the constant
zero when checking for valid interrupts. NO_IRQ=-1 on ppc and NO_IRQ=0 on
powerpc so the checks against zero are not correct.
Signed-off-by: NJon Smirl <jonsmirl@gmail.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Based on earlier work by Jon Smirl and Jochen Friedrich.

Update most new-style i2c drivers to use standard module aliasing
instead of the old driver_name/type driver matching scheme. I've
left the video drivers apart (except for SoC camera drivers) as
they're a bit more diffcult to deal with, they'll have their own
patch later.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Jon Smirl <jonsmirl@gmail.com>
Cc: Jochen Friedrich <jochen@scram.de>

If initialization fails, we want to restore the physical bus, not delete
it again.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

* Remove commented-out code.
* Use dev_warn instead of printk.
* Remove a legacy comment.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

* Remove a needless include.
* Remove a legacy comment in piix4_access.
* Minor optimization in piix4_access.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Signed-off-by: NJean Delvare <khali@linux-fr.org>

Signed-off-by: NJean Delvare <khali@linux-fr.org>

Since 43cc71ee, the platform
modalias is prefixed with "platform:". Add MODULE_ALIAS() to the
hotpluggable I2C platform drivers, to allow module auto loading.

[ db: add some more drivers ]
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

This is V5 of the SuperH Mobile I2C Controller Driver. A simple Master
only driver for the I2C block included in processors such as sh7343,
sh7722 and sh7723. Tested on a sh7722 MigoR using a rs5c732b rtc.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Don't use 0 as NULL pointer.

Spotted by sparse.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Move init_completion to just before i2c transfer.
http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3385Signed-off-by: NHans Schillstrom <hans.schillstrom@shlsys.com>
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Simply use "depends on BLACKFIN" (which is technically correct) and just
document which machines have the device.
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

i2c-bfin-twi: Use simpler comment headers and strip out information that is maintained in the scm's log
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NJean Delvare <khali@linux-fr.org>