By popular request, provide means to log a timestamp along with the
counter overflow event.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
LKML-Reference: <20090406094518.024173282@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Reading through the code I saw I forgot the finish the mlock accounting.
Do so now.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
LKML-Reference: <20090406094517.899767331@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Prepare for more generic overflow handling. The new perf_counter_overflow()
method will handle the generic bits of the counter overflow, and can return
a !0 return value, in which case the counter should be (soft) disabled, so
that it won't count until it's properly disabled.

XXX: do powerpc and swcounter
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
LKML-Reference: <20090406094517.812109629@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Implement set_perf_counter_pending() with a self-IPI so that it will
run ASAP in a usable context.

For now use a second IRQ vector, because the primary vector pokes
the apic in funny ways that seem to confuse things.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
LKML-Reference: <20090406094517.724626696@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Prepare the pending infrastructure to do more than wakeups.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
LKML-Reference: <20090406094517.634732847@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Provide support for fcntl() I/O availability signals.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
LKML-Reference: <20090406094517.579788800@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Change the callchain context entries to u16, so as to gain some space.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
LKML-Reference: <20090406094517.457320003@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Update the userspace read method.

Paul noted that:
 - userspace cannot observe ->lock & 1 on the same cpu.
 - we need a barrier() between reading ->lock and ->index
   to ensure we read them in that prticular order.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
LKML-Reference: <20090406094517.368446033@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Paul noted that we don't need SMP barriers for the mmap() counter read
because its always on the same cpu (otherwise you can't access the hw
counter anyway).

So remove the SMP barriers and replace them with regular compiler
barriers.

Further, update the comment to include a race free method of reading
said hardware counter. The primary change is putting the pmc_read
inside the seq-loop, otherwise we can still race and read rubbish.
Noticed-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Orig-LKML-Reference: <20090402091319.577951445@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Put in counts to tell which ips belong to what context.

  -----
   | |  hv
   | --
nr | |  kernel
   | --
   | |  user
  -----
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Orig-LKML-Reference: <20090402091319.493101305@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Update to reflect the new record_type ABI changes.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Orig-LKML-Reference: <20090402091319.407283141@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

By request, provide a way to request a wakeup every 'n' events instead
of every page of output.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Orig-LKML-Reference: <20090402091319.323309784@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Per suggestion from Paul, move the event overflow bits to record_type
and sanitize the enums a bit.

Breaks the ABI -- again ;-)
Suggested-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Orig-LKML-Reference: <20090402091319.151921176@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Decouple kerneltop display from event acquisition by introducing
a separate data acquisition thread. This fixes annnoying kerneltop
display refresh jitter and missed events.

Also add a -r <prio> option, to switch the data acquisition thread
to real-time priority.
Signed-off-by: NMike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Orig-LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Follow the example set by powerpc and try to play nice with oprofile
and the nmi watchdog.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPaul Mackerras <paulus@samba.org>
Orig-LKML-Reference: <20090330171024.459968444@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Provide the x86 perf_callchain() implementation.

Code based on the ftrace/sysprof code from Soeren Sandmann Pedersen.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPaul Mackerras <paulus@samba.org>
Cc: Soeren Sandmann Pedersen <sandmann@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Orig-LKML-Reference: <20090330171024.341993293@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Provide the generic callchain support bits. If hw_event->callchain is
set the arch specific perf_callchain() function is called upon to
provide a perf_callchain_entry structure filled with the current
callchain.

If it does so, it is added to the overflow output event.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPaul Mackerras <paulus@samba.org>
Orig-LKML-Reference: <20090330171024.254266860@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Go along with the new perf_event_type ABI.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPaul Mackerras <paulus@samba.org>
Orig-LKML-Reference: <20090330171024.133985461@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Breaks ABI yet again :-)

Change the event type so that [0, 2^31-1] are regular event types, but
[2^31, 2^32-1] forms a bitmask for overflow events.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPaul Mackerras <paulus@samba.org>
Orig-LKML-Reference: <20090330171024.047961770@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Move the nmi argument to the _begin() function, so that _end() only needs the
handle. This allows the _begin() function to generate a wakeup on event loss.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPaul Mackerras <paulus@samba.org>
Orig-LKML-Reference: <20090330171023.959404268@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: new functionality

This adds add an option to the perfstat mode of kerneltop to scale the
reported counter values according to the fraction of time that each
counter gets to count.  This is invoked with the -l option (I used 'l'
because s, c, a and e were all taken already.)  This uses the new
PERF_RECORD_TOTAL_TIME_{ENABLED,RUNNING} read format options.

With this, we get output like this:

$ ./perfstat -l -e 0:0,0:1,0:2,0:3,0:4,0:5 ./spin

 Performance counter stats for './spin':

     4016072055  CPU cycles           (events)  (scaled from 66.53%)
     2005887318  instructions         (events)  (scaled from 66.53%)
        1762849  cache references     (events)  (scaled from 66.69%)
         165229  cache misses         (events)  (scaled from 66.85%)
     1001298009  branches             (events)  (scaled from 66.78%)
          41566  branch misses        (events)  (scaled from 66.61%)

 Wall-clock time elapsed:  2438.227446 msecs

This also lets us detect when a counter is zero because the counter
never got to go on the CPU at all.  In that case we print <not counted>
rather than 0.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Orig-LKML-Reference: <20090330171023.871484899@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Now that Paul cleaned up the error propagation paths, pass down the
x86 error as well.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPaul Mackerras <paulus@samba.org>
Orig-LKML-Reference: <20090330171023.792822360@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: better error reporting

At present, if hw_perf_counter_init encounters an error, all it can do
is return NULL, which causes sys_perf_counter_open to return an EINVAL
error to userspace.  This isn't very informative for userspace; it means
that userspace can't tell the difference between "sorry, oprofile is
already using the PMU" and "we don't support this CPU" and "this CPU
doesn't support the requested generic hardware event".

This commit uses the PTR_ERR/ERR_PTR/IS_ERR set of macros to let
hw_perf_counter_init return an error code on error rather than just NULL
if it wishes.  If it does so, that error code will be returned from
sys_perf_counter_open to userspace.  If it returns NULL, an EINVAL
error will be returned to userspace, as before.

This also adapts the powerpc hw_perf_counter_init to make use of this
to return ENXIO, EINVAL, EBUSY, or EOPNOTSUPP as appropriate.  It would
be good to add extra error numbers in future to allow userspace to
distinguish the various errors that are currently reported as EINVAL,
i.e. irq_period < 0, too many events in a group, conflict between
exclude_* settings in a group, and PMU resource conflict in a group.

[ v2: fix a bug pointed out by Corey Ashford where error returns from
      hw_perf_counter_init were not handled correctly in the case of
      raw hardware events.]
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Orig-LKML-Reference: <20090330171023.682428180@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cooperate with oprofile

At present, on PowerPC, if you have perf_counters compiled in, oprofile
doesn't work.  There is code to allow the PMU to be shared between
competing subsystems, such as perf_counters and oprofile, but currently
the perf_counter subsystem reserves the PMU for itself at boot time,
and never releases it.

This makes perf_counter play nicely with oprofile.  Now we keep a count
of how many perf_counter instances are counting hardware events, and
reserve the PMU when that count becomes non-zero, and release the PMU
when that count becomes zero.  This means that it is possible to have
perf_counters compiled in and still use oprofile, as long as there are
no hardware perf_counters active.  This also means that if oprofile is
active, sys_perf_counter_open will fail if the hw_event specifies a
hardware event.

To avoid races with other tasks creating and destroying perf_counters,
we use a mutex.  We use atomic_inc_not_zero and atomic_add_unless to
avoid having to take the mutex unless there is a possibility of the
count going between 0 and 1.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Orig-LKML-Reference: <20090330171023.627912475@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

frob the kerneltop code to print the mmap data in the stream

Better use would be collecting the IPs per PID and mapping them onto
the provided userspace code.. TODO
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPaul Mackerras <paulus@samba.org>
Orig-LKML-Reference: <20090330171023.501902515@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Currently the profiling information returns userspace IPs but no way
to correlate them to userspace code. Userspace could look into
/proc/$pid/maps but that might not be current or even present anymore
at the time of analyzing the IPs.

Therefore provide means to track the mmap information and provide it
in the output stream.

XXX: only covers mmap()/munmap(), mremap() and mprotect() are missing.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPaul Mackerras <paulus@samba.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <20090330171023.417259499@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Now that the kernel side changed, match up again.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPaul Mackerras <paulus@samba.org>
Orig-LKML-Reference: <20090330171023.327144324@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

It just occured to me it is possible to have multiple contending
updates of the userpage (mmap information vs overflow vs counter).
This would break the seqlock logic.

It appear the arch code uses this from NMI context, so we cannot
possibly serialize its use, therefore separate the data_head update
from it and let it return to its original use.

The arch code needs to make sure there are no contending callers by
disabling the counter before using it -- powerpc appears to do this
nicely.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPaul Mackerras <paulus@samba.org>
Orig-LKML-Reference: <20090330171023.241410660@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

While going over the wakeup code I noticed delayed wakeups only work
for hardware counters but basically all software counters rely on
them.

This patch unifies and generalizes the delayed wakeup to fix this
issue.

Since we're dealing with NMI context bits here, use a cmpxchg() based
single link list implementation to track counters that have pending
wakeups.

[ This should really be generic code for delayed wakeups, but since we
  cannot use cmpxchg()/xchg() in generic code, I've let it live in the
  perf_counter code. -- Eric Dumazet could use it to aggregate the
  network wakeups. ]

Furthermore, the x86 method of using TIF flags was flawed in that its
quite possible to end up setting the bit on the idle task, loosing the
wakeup.

The powerpc method uses per-cpu storage and does appear to be
sufficient.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPaul Mackerras <paulus@samba.org>
Orig-LKML-Reference: <20090330171023.153932974@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: new functionality

Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling.  That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.

This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events.  These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.

These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter.  (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)

Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:

true_count_estimate = count * total_time_enabled / total_time_running

This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.

This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.

In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace.  When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them.  (tstamp_stopped is only used in INACTIVE state.)  The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated.  There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.

This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace.  They are separate fields so that they can be
atomic.  We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.

It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group).  However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups.  (In both cases a
top-level task-clock counter was also added.)

In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).

[ v2: address review comments by Andrew Morton. ]
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

A brainfart stopped single page mmap()s working. The rest of the code
should be perfectly fine with not having any data pages.
Reported-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Orig-LKML-Reference: <1237981712.7972.812.camel@twins>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Teach kerneltop about the new output ABI.

XXX: anybody fancy integrating the PID/TID data into the output?

Bump the mmap_data pages a little because we bloated the output and
have to be more careful about overruns with structured data.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Orig-LKML-Reference: <20090325113317.192910290@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

provide a knob to set the number of mmap data pages.
Signed-off-by: NMike Galbraith <efault@gmx.de>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Orig-LKML-Reference: <20090325113317.104545398@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Allow cpu wide counters to profile userspace by providing what process
the sample belongs to.

This raises the first issue with the output type, lots of these
options: group, tid, callchain, etc.. are non-exclusive and could be
combined, suggesting a bitfield.

However, things like the mmap() data stream doesn't fit in that.

How to split the type field...
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Orig-LKML-Reference: <20090325113317.013775235@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Ensure we never write more than we said we would.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Orig-LKML-Reference: <20090325113316.921433024@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Provide a {type,size} header for each output entry.

This should provide extensible output, and the ability to mix multiple streams.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Orig-LKML-Reference: <20090325113316.831607932@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Provide a begin, copy, end interface to the output buffer.

begin() reserves the space,
 copy() copies the data over, considering page boundaries,
  end() finalizes the event and does the wakeup.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Orig-LKML-Reference: <20090325113316.740550870@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix kerneltop 100% CPU usage

Only return a poll event when there's actually been one, poll_wait()
doesn't actually wait for the waitq you pass it, it only enqueues
you on it.

Only once all FDs have been iterated and none of thm returned a
poll-event will it schedule().

Also make it return POLL_HUP when there's not mmap() area to read from.

Further, fix a silly bug in the write code.
Reported-by: NMike Galbraith <efault@gmx.de>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arjan van de Ven <arjan@infradead.org>
Orig-LKML-Reference: <1237897096.24918.181.camel@twins>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: documentation fix

This updates the perfcounter documentation to reflect recent changes.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Paul Mackerras wrote:

> I noticed the poll stuff is bogus - we have a 2D array of struct
> pollfds (MAX_NR_CPUS x MAX_COUNTERS), we fill in a sub-array (with the
> rest being uninitialized, since the array is on the stack) and then
> pass the first nr_cpus elements to poll.  Not what we really meant, I
> suspect. :)  Not even if we only have one counter, since it's the
> counter dimension that varies fastest.

This should fix the most obvious poll fubar.. not enough to fix the
full problem though..
Reported-by: NPaul Mackerras <paulus@samba.org>
Reported-by: NMike Galbraith <efault@gmx.de>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Orig-LKML-Reference: <18888.29986.340328.540512@cargo.ozlabs.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>