Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 20 6月, 2012 11 次提交
  3. 04 6月, 2012 2 次提交
    • L
      tools/power turbostat: fix IVB support · 650a37f3
      由 Len Brown 提交于 
      Initial IVB support went into turbostat in Linux-3.1:
553575f1
(tools turbostat: recognize and run properly on IVB)

However, when running on IVB, turbostat would fail
to report the new couters added with SNB, c7, pc2 and pc7.
So in scenarios where these counters are non-zero on IVB,
turbostat would report erroneous residencey results.

In particular c7 time would be added to c1 time,
since c1 time is calculated as "that which is left over".

Also, turbostat reports MHz capabilities when passed
the "-v" option, and it would incorrectly report 133MHz
bclk instead of 100MHz bclk for IVB, which would inflate
GHz reported with that option.

This patch is a backport of a fix already included in turbostat v2.
Signed-off-by: NLen Brown <len.brown@intel.com>
      650a37f3
    • L
      tools/power turbostat: fix un-intended affinity of forked program · d15cf7c1
      由 Len Brown 提交于 
      Linux 3.4 included a modification to turbostat to
lower cross-call overhead by using scheduler affinity:

15aaa346
(tools turbostat: reduce measurement overhead due to IPIs)

In the use-case where turbostat forks a child program,
that change had the un-intended side-effect of binding
the child to the last cpu in the system.

This change removed the binding before forking the child.

This is a back-port of a fix already included in turbostat v2.
Signed-off-by: NLen Brown <len.brown@intel.com>
      d15cf7c1
  5. 01 6月, 2012 3 次提交
    • C
      syscalls, x86: add __NR_kcmp syscall · d97b46a6
      由 Cyrill Gorcunov 提交于 
      While doing the checkpoint-restore in the user space one need to determine
whether various kernel objects (like mm_struct-s of file_struct-s) are
shared between tasks and restore this state.

The 2nd step can be solved by using appropriate CLONE_ flags and the
unshare syscall, while there's currently no ways for solving the 1st one.

One of the ways for checking whether two tasks share e.g.  mm_struct is to
provide some mm_struct ID of a task to its proc file, but showing such
info considered to be not that good for security reasons.

Thus after some debates we end up in conclusion that using that named
'comparison' syscall might be the best candidate.  So here is it --
__NR_kcmp.

It takes up to 5 arguments - the pids of the two tasks (which
characteristics should be compared), the comparison type and (in case of
comparison of files) two file descriptors.

Lookups for pids are done in the caller's PID namespace only.

At moment only x86 is supported and tested.

[akpm@linux-foundation.org: fix up selftests, warnings]
[akpm@linux-foundation.org: include errno.h]
[akpm@linux-foundation.org: tweak comment text]
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Valdis.Kletnieks@vt.edu
Cc: Michal Marek <mmarek@suse.cz>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      d97b46a6
    • D
      tools/selftests: add mq_perf_tests · 7820b071
      由 Doug Ledford 提交于 
      Add the mq_perf_tests tool I used when creating my mq performance patch.
Also add a local .gitignore to keep the binaries from showing up in git
status output.

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: NDoug Ledford <dledford@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      7820b071
    • D
      selftests: add mq_open_tests · 50069a58
      由 Doug Ledford 提交于 
      Add a directory to house POSIX message queue subsystem specific tests.
Add first test which checks the operation of mq_open() under various
corner conditions.
Signed-off-by: NDoug Ledford <dledford@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Joe Korty <joe.korty@ccur.com>
Cc: Amerigo Wang <amwang@redhat.com>
Cc: Serge E. Hallyn <serue@us.ibm.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      50069a58
  7. 31 5月, 2012 14 次提交
    • S
      perf uprobes: Remove unnecessary check before strlist__delete · a23c4dc4
      由 Srikar Dronamraju 提交于 
      Since strlist__delete() itself checks, the additional check before
calling strlist__delete() is redundant.

No Functional change.
Signed-off-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Suggested-by: NArnaldo Carvalho de Melo <acme@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20120531114643.23691.38666.sendpatchset@srdronam.in.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      a23c4dc4
    • S
      perf symbols: Check for valid dso before creating map · 378474e4
      由 Srikar Dronamraju 提交于 
      dso__new() can return NULL. Hence verify dso before creating a new map.
Signed-off-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Suggested-by: NArnaldo Carvalho de Melo <acme@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20120531114656.23691.54223.sendpatchset@srdronam.in.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      378474e4
    • J
      perf evsel: Fix 32 bit values endianity swap for sample_id_all header · 37073f9e
      由 Jiri Olsa 提交于 
      We swap the sample_id_all header by u64 pointers. Some members of the
header happen to be 32 bit values. We need to handle them separatelly.

Together with other endianity patches, this change fixies perf report
discrepancies on origin and target systems as described in test 1 below,
e.g. following perf report diff:

...
      0.12%               ps  [kernel.kallsyms]    [k] clear_page
-     0.12%              awk  bash                 [.] alloc_word_desc
+     0.12%              awk  bash                 [.] yyparse
      0.11%   beah-rhts-task  libpython2.6.so.1.0  [.] 0x5560e
      0.10%             perf  libc-2.12.so         [.] __ctype_toupper_loc
-     0.09%  rhts-test-runne  bash                 [.] maybe_make_export_env
+     0.09%  rhts-test-runne  bash                 [.] 0x385a0
      0.09%               ps  [kernel.kallsyms]    [k] page_fault
...

Note, running following to test perf endianity handling:
test 1)
  - origin system:
    # perf record -a -- sleep 10 (any perf record will do)
    # perf report > report.origin
    # perf archive perf.data

  - copy the perf.data, report.origin and perf.data.tar.bz2
    to a target system and run:
    # tar xjvf perf.data.tar.bz2 -C ~/.debug
    # perf report > report.target
    # diff -u report.origin report.target

  - the diff should produce no output
    (besides some white space stuff and possibly different
     date/TZ output)

test 2)
  - origin system:
    # perf record -ag -fo /tmp/perf.data -- sleep 1
  - mount origin system root to the target system on /mnt/origin
  - target system:
    # perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \
     --kallsyms /mnt/origin/proc/kallsyms
  - complete perf.data header is displayed
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Tested-by: NDavid Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338380624-7443-4-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      37073f9e
    • J
      perf session: Handle endianity swap on sample_id_all header data · 268fb20f
      由 Jiri Olsa 提交于 
      Adding endianity swapping for event header attached via sample_id_all.

Currently we dont do that and it's causing wrong data to be read when
running report on architecture with different endianity than the record.

The perf is currently able to process 32-bit PPC samples on 32-bit
and 64-bit x86.

Together with other endianity patches, this change fixies perf report
discrepancies on origin and target systems as described in test 1
below, e.g. following perf report diff:

...
      0.12%               ps  [kernel.kallsyms]    [k] clear_page
-     0.12%              awk  bash                 [.] alloc_word_desc
+     0.12%              awk  bash                 [.] yyparse
      0.11%   beah-rhts-task  libpython2.6.so.1.0  [.] 0x5560e
      0.10%             perf  libc-2.12.so         [.] __ctype_toupper_loc
-     0.09%  rhts-test-runne  bash                 [.] maybe_make_export_env
+     0.09%  rhts-test-runne  bash                 [.] 0x385a0
      0.09%               ps  [kernel.kallsyms]    [k] page_fault
...

Note, running following to test perf endianity handling:
test 1)
  - origin system:
    # perf record -a -- sleep 10 (any perf record will do)
    # perf report > report.origin
    # perf archive perf.data

  - copy the perf.data, report.origin and perf.data.tar.bz2
    to a target system and run:
    # tar xjvf perf.data.tar.bz2 -C ~/.debug
    # perf report > report.target
    # diff -u report.origin report.target

  - the diff should produce no output
    (besides some white space stuff and possibly different
     date/TZ output)

test 2)
  - origin system:
    # perf record -ag -fo /tmp/perf.data -- sleep 1
  - mount origin system root to the target system on /mnt/origin
  - target system:
    # perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \
     --kallsyms /mnt/origin/proc/kallsyms
  - complete perf.data header is displayed
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Tested-by: NDavid Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338380624-7443-3-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      268fb20f
    • J
      perf symbols: Handle different endians properly during symbol load · 8db4841f
      由 Jiri Olsa 提交于 
      Currently we dont care about the file object's endianness. It's possible
we read buildid file object from different architecture than we are
currentlly running on. So we need to care about properly reading such
object's data - handle different endianness properly.

Adding:
	needs_swap DSO field
	dso__swap_init function to initialize DSO's needs_swap
	DSO__SWAP to read the data with proper swaps

Together with other endianity patches, this change fixies perf report
discrepancies on origin and target systems as described in test 1 below,
e.g. following perf report diff:

...
      0.12%               ps  [kernel.kallsyms]    [k] clear_page
-     0.12%              awk  bash                 [.] alloc_word_desc
+     0.12%              awk  bash                 [.] yyparse
      0.11%   beah-rhts-task  libpython2.6.so.1.0  [.] 0x5560e
      0.10%             perf  libc-2.12.so         [.] __ctype_toupper_loc
-     0.09%  rhts-test-runne  bash                 [.] maybe_make_export_env
+     0.09%  rhts-test-runne  bash                 [.] 0x385a0
      0.09%               ps  [kernel.kallsyms]    [k] page_fault
...

Note, running following to test perf endianity handling:
test 1)
  - origin system:
    # perf record -a -- sleep 10 (any perf record will do)
    # perf report > report.origin
    # perf archive perf.data

  - copy the perf.data, report.origin and perf.data.tar.bz2
    to a target system and run:
    # tar xjvf perf.data.tar.bz2 -C ~/.debug
    # perf report > report.target
    # diff -u report.origin report.target

  - the diff should produce no output
    (besides some white space stuff and possibly different
     date/TZ output)

test 1)
  - origin system:
    # perf record -ag -fo /tmp/perf.data -- sleep 1
  - mount origin system root to the target system on /mnt/origin
  - target system:
    # perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \
     --kallsyms /mnt/origin/proc/kallsyms
  - complete perf.data header is displayed
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338380624-7443-2-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      8db4841f
    • N
      perf evlist: Pass third argument to ioctl explicitly · 55da8005
      由 Namhyung Kim 提交于 
      The ioctl on perf event fd wants 3 arguments but we only passed 2. As
the only user of the functions is perf record and it calls them for
every event (regardless of group setting), just pass 0 for now.
Signed-off-by: NNamhyung Kim <namhyung.kim@lge.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338443506-25009-3-git-send-email-namhyung.kim@lge.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      55da8005
    • N
      perf tools: Update ioctl documentation for PERF_IOC_FLAG_GROUP · a59e64a1
      由 Namhyung Kim 提交于 
      The ioctl interface of perf event fd receives 3 arguments to control
event group behavior but it lacked documentation.
Signed-off-by: NNamhyung Kim <namhyung.kim@lge.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338443506-25009-2-git-send-email-namhyung.kim@lge.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      a59e64a1
    • A
      perf tools: Make --version show kernel version instead of pull req tag · aa5cdd30
      由 Arnaldo Carvalho de Melo 提交于 
      Before:

  $ perf --version
  perf version perf.urgent.for.mingo.5.g37da28

After:

  $ perf --version
  perf version 3.4.8941.g37da28.dirty

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vc9b4e6023iegz9kabr3yvyv@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      aa5cdd30
    • N
      perf tools: Check if callchain is corrupted · 114067b6
      由 Namhyung Kim 提交于 
      We faced segmentation fault on perf top -G at very high sampling rate
due to a corrupted callchain. While the root cause was not revealed (I
failed to figure it out), this patch tries to protect us from the
segfault on such cases.
Reported-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NNamhyung Kim <namhyung.kim@lge.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sunjin Yang <fan4326@gmail.com>
Link: http://lkml.kernel.org/r/1338443007-24857-2-git-send-email-namhyung.kim@lge.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      114067b6
    • N
      perf callchain: Make callchain cursors TLS · 47260645
      由 Namhyung Kim 提交于 
      perf top -G has a race on callchain cursor between main thread and
display thread. Since the callchain cursors are used locally make them
thread-local data would solve the problem.
Signed-off-by: NNamhyung Kim <namhyung.kim@lge.com>
Reported-by: NSunjin Yang <fan4326@gmail.com>
Suggested-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sunjin Yang <fan4326@gmail.com>
Link: http://lkml.kernel.org/r/1338443007-24857-1-git-send-email-namhyung.kim@lge.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      47260645
    • A
      perf tools: Fix pager on minimal-install embedded systems · ea1b3eba
      由 Avik Sil 提交于 
      Some Distributions may lack "less" package being included by default,
e.g., Linaro nano rootfs. In those cases use the portable "pager"
command instead of "less".
Signed-off-by: NAvik Sil <avik.sil@linaro.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338287725-26382-1-git-send-email-avik.sil@linaro.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      ea1b3eba
    • A
      perf tools: Fix make tarballs · f1439c31
      由 Arnaldo Carvalho de Melo 提交于 
      The patch series that introduced the top level tools/ makefile and the
libtraceevent broke this feature where files needed to build in a
detached tarball were not included in the MANIFEST file and thus not
included in the tarball.

Fix it by adding the relevant files to the MANIFEST.

Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-z3mjj74927xvqwhlmu18kj80@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      f1439c31
    • D
      perf script: Fix regression in callchain dso name · 52deff71
      由 David Ahern 提交于 
      $ perf script -i /tmp/perf.data
...
gcc 13623 544315.062858: context-switches:
    ffffffff815f65c9 __schedule ([kernel.kallsyms])
    ffffffff81087cea __cond_resched ([kernel.kallsyms])
    ffffffff815f6b92 _cond_resched ([kernel.kallsyms])
    ffffffff815fb87a do_page_fault ([kernel.kallsyms])
    ffffffff815f8465 page_fault ([kernel.kallsyms])
        2b7a71ea0303 _dl_lookup_symbol_x ([kernel.kallsyms])
        2b7a71ea1eb5 _dl_relocate_object ([kernel.kallsyms])
        2b7a71e99b2e dl_main ([kernel.kallsyms])
        2b7a71eab7f4 _dl_sysdep_start ([kernel.kallsyms])

All DSO's in a callchain are printed as [kernel.kallsyms].

git bisect chased it to:

547a92e0 is the first bad commit
commit 547a92e0
Author: Akihiro Nagai <akihiro.nagai.hw@hitachi.com>
Date:   Mon Jan 30 13:42:57 2012 +0900

    perf script: Unify the expressions indicating "unknown"

    The perf script command uses various expressions to indicate "unknown".

    It is unfriendly for user scripts to parse it. So, this patch unifies
    the expressions to "[unknown]".

Looks like a copy-paste in that the other references use al.map but this one
should be node->map.

With this patch you get:

$ perf script -i /tmp/perf.data
...
gcc 13623 544315.062858: context-switches:
    ffffffff815f65c9 __schedule ([kernel.kallsyms])
    ffffffff81087cea __cond_resched ([kernel.kallsyms])
    ffffffff815f6b92 _cond_resched ([kernel.kallsyms])
    ffffffff815fb87a do_page_fault ([kernel.kallsyms])
    ffffffff815f8465 page_fault ([kernel.kallsyms])
        2b7a71ea0303 _dl_lookup_symbol_x (/lib64/ld-2.14.90.so)
        2b7a71ea1eb5 _dl_relocate_object (/lib64/ld-2.14.90.so)
        2b7a71e99b2e dl_main (/lib64/ld-2.14.90.so)
        2b7a71eab7f4 _dl_sysdep_start (/lib64/ld-2.14.90.so)
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Akihiro Nagai <akihiro.nagai.hw@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1338353906-60706-1-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      52deff71
    • A
      perf stat: Initialize default events wrt exclude_{guest,host} · 79695e1b
      由 Arnaldo Carvalho de Melo 提交于 
      When no event is specified the tools use perf_evlist__add_default(), that will
call event_attr_init to initialize the KVM exclusion bits.

When the change was made to the tools so that by default guest samples would be
excluded, the changes were made just to the parsing routines and to
perf_evlist__add_default(), not to perf_evlist__add_attrs, that is used so far
just by perf stat to add multiple events, according to the level of detail
specified.

Recently the tools were changed to reconstruct the event name from all the
details in perf_event_attr, not just from .type and .config, but taking into
account all the feature bits (.exclude_{guest,host,user,kernel,etc},
.precise_ip, etc).

That is when we noticed that the default for perf stat wasn't the one for the
rest of the tools, i.e. the .exclude_guest bit wasn't being set.

I.e. the default, that doesn't call event_attr_init was showing the :HG
modifier:

  $ perf stat usleep 1

   Performance counter stats for 'usleep 1':

            0.942119 task-clock                #    0.454 CPUs utilized
                   1 context-switches          #    0.001 M/sec
                   0 CPU-migrations            #    0.000 K/sec
                 126 page-faults               #    0.134 M/sec
             693,193 cycles:HG                 #    0.736 GHz                     [40.11%]
             407,461 stalled-cycles-frontend:HG #   58.78% frontend cycles idle    [72.29%]
             365,403 stalled-cycles-backend:HG #   52.71% backend  cycles idle
             465,982 instructions:HG           #    0.67  insns per cycle
                                               #    0.87  stalled cycles per insn
              89,760 branches:HG               #   95.275 M/sec
               6,178 branch-misses:HG          #    6.88% of all branches

         0.002077228 seconds time elapsed

While if one explicitely specifies the same events, which will make the parsing code
to be called and thus event_attr_init is called:

  $ perf stat -e task-clock,context-switches,migrations,page-faults,cycles,stalled-cycles-frontend,stalled-cycles-backend,instructions,branches,branch-misses usleep 1

   Performance counter stats for 'usleep 1':

            1.040349 task-clock                #    0.500 CPUs utilized
                   2 context-switches          #    0.002 M/sec
                   0 CPU-migrations            #    0.000 K/sec
                 127 page-faults               #    0.122 M/sec
             587,966 cycles                    #    0.565 GHz                     [13.18%]
             459,167 stalled-cycles-frontend   #   78.09% frontend cycles idle
             390,249 stalled-cycles-backend    #   66.37% backend  cycles idle
             504,006 instructions              #    0.86  insns per cycle
                                               #    0.91  stalled cycles per insn
              96,455 branches                  #   92.714 M/sec
               6,522 branch-misses             #    6.76% of all branches         [96.12%]

         0.002078681 seconds time elapsed

Fix it by introducing a perf_evlist__add_default_attrs method that will call
evlist_attr_init in all the perf_event_attr entries before adding the events.
Reported-by: NIngo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4eysr236r0pgiyum9epwxw7s@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      79695e1b
  9. 30 5月, 2012 9 次提交
  11. 29 5月, 2012 1 次提交