pm_idle() on ARM was a synonym for default_idle(),
so simply invoke default_idle() directly.
Signed-off-by: NLen Brown <len.brown@intel.com>
Reviewed-by: NKevin Hilman <khilman@linaro.org>
Tested-by: NKevin Hilman <khilman@linaro.org>

As we don't include kernel/Kconfig.hz as this defines HZ values
unsuitable for ARM platforms, add the SCHED_HRTICK to properly configure
the scheduler for hrtimer operation.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The mmid macro is meant to be used to get the mm->context.id data
from the mm structure, but it seems to have been missed in a cuple
of files.
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NBen Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Since the new ASID code in b5466f87
("ARM: mm: remove IPI broadcasting on ASID rollover") was changed to
use 64bit operations it has broken the BE operation due to an issue
with the MM code accessing sub-fields of mm->context.id.

When running in BE mode we see the values in mm->context.id are stored
with the highest value first, so the LDR in the arch/arm/mm/proc-macros.S
reads the wrong part of this field. To resolve this, change the LDR in
the mmid macro to load from +4.
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NBen Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

In order to allow drivers to specify private data for each controller,
this commit adds a private_data field to the struct hw_pci. This field
is an array of nr_controllers pointers that will be used to initialize
the private_data field of the corresponding controller's pci_sys_data
structure.
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

When using deferred driver probing, PCI host controller drivers may
actually require this function after the init stage.
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

869486d5f51 (ARM: 7646/1: mm: use static_vm for managing static mapped
areas) introduced new warnings:

arch/arm/mm/mmu.c: In function 'pci_reserve_io':
arch/arm/mm/mmu.c:888:16: warning: unused variable 'addr'
arch/arm/mm/mmu.c:887:20: warning: unused variable 'vm'

because it failed to delete the two local variables it no longer used.
Fix this.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

A static mapped area is ARM-specific, so it is better not to use
generic vmalloc data structure, that is, vmlist and vmlist_lock
for managing static mapped area. And it causes some needless overhead and
reducing this overhead is better idea.

Now, we have newly introduced static_vm infrastructure.
With it, we don't need to iterate all mapped areas. Instead, we just
iterate static mapped areas. It helps to reduce an overhead of finding
matched area. And architecture dependency on vmalloc layer is removed,
so it will help to maintainability for vmalloc layer.
Reviewed-by: NNicolas Pitre <nico@linaro.org>
Acked-by: NRob Herring <rob.herring@calxeda.com>
Tested-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

In current implementation, we used ARM-specific flag, that is,
VM_ARM_STATIC_MAPPING, for distinguishing ARM specific static mapped area.
The purpose of static mapped area is to re-use static mapped area when
entire physical address range of the ioremap request can be covered
by this area.

This implementation causes needless overhead for some cases.
For example, assume that there is only one static mapped area and
vmlist has 300 areas. Every time we call ioremap, we check 300 areas for
deciding whether it is matched or not. Moreover, even if there is
no static mapped area and vmlist has 300 areas, every time we call
ioremap, we check 300 areas in now.

If we construct a extra list for static mapped area, we can eliminate
above mentioned overhead.
With a extra list, if there is one static mapped area,
we just check only one area and proceed next operation quickly.

In fact, it is not a critical problem, because ioremap is not frequently
used. But reducing overhead is better idea.

Another reason for doing this work is for removing architecture dependency
on vmalloc layer. I think that vmlist and vmlist_lock is internal data
structure for vmalloc layer. Some codes for debugging and stat inevitably
use vmlist and vmlist_lock. But it is preferable that they are used
as least as possible in outside of vmalloc.c

Now, I introduce an ARM-specific infrastructure for static mapped area. In
the following patch, we will use this and resolve above mentioned problem.
Reviewed-by: NNicolas Pitre <nico@linaro.org>
Tested-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Now, there is no user for vmregion.
So remove it.
Acked-by: NNicolas Pitre <nico@linaro.org>
Tested-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Parts of the virtual memory layout (mainly the modules area) are
described using open-coded immediate values.

Use the SZ_ definitions from linux/sizes.h instead to make the code
clearer.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

If we want load epoch_cyc and epoch_ns atomically,
we should update epoch_cyc_copy first of all.
This notify reader that updating is in progress.

If we update epoch_cyc first like as current implementation,
there is subtle error case.
Look at the below example.

<Initial Condition>
cyc = 9
ns = 900
cyc_copy = 9

== CASE 1 ==
<CPU A = reader>           <CPU B = updater>
                           write cyc = 10
read cyc = 10
read ns = 900
                           write ns = 1000
                           write cyc_copy = 10
read cyc_copy = 10

output = (10, 900)

== CASE 2 ==
<CPU A = reader>           <CPU B = updater>
read cyc = 9
                           write cyc = 10
                           write ns = 1000
read ns = 1000
read cyc_copy = 9
                           write cyc_copy = 10
output = (9, 1000)

If atomic read is ensured, output should be (9, 900) or (10, 1000).
But, output in example case are not.

So, change updating sequence in order to correct this problem.

Cc: <stable@vger.kernel.org>
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Any devices wishing to use the AB8500's GPIO IRQs were forced to
request virtual IRQs from the gpio-ab8500 driver. Now that
responsibility has been passed back to the AB8500 core driver,
devices can request real IRQ numbers instead. This patch removes
any traces of the old virtual IRQ conversion handlers, which will
force any drivers requesting IRQs to use real IRQS.

Cc: arm@kernel.org
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

AB8500 GPIO no longer handles its GPIO IRQs. Instead, the AB8500
core driver has taken back the responsibility. Prior to this
happening, the AB8500 GPIO driver provided a set of virtual IRQs
which were used as a pass-through. These virtual IRQs had a base
of MOP500_AB8500_VIR_GPIO_IRQ_BASE, which was passed though pdata.
We don't need to do this anymore, so we're pulling out the
property from the structure.

Cc: arm@kernel.org
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The device->state_count is initialized in the cpuidle_register_device
function.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

With one function handling the idle state and a single variable,
the usage of the davinci_ops is overkill.

This patch removes these ops and simplify the code.

Furthermore, the 'driver_data' field is no longer used, we have
1 of the 3 remaining user of this field removed.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

The patch is mindless, it just moves the idle function below in the file
in order to prevent forward declaration in the next patch.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

That will allow to cleanup the rest of the code right after,
because the ops won't make sense.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

We have received multiple reports of mmap failures when running with a
2:2 vm split. These manifest as either -EINVAL with a non page-aligned
address (ending 0xaaa) or a SEGV, depending on the application. The
issue is commonly observed in children of make, which appears to use
bottom-up mmap (assumedly because it changes the stack rlimit).

Further investigation reveals that this regression was triggered by
394ef640 ("mm: use vm_unmapped_area() on arm architecture"), whereby
TASK_UNMAPPED_BASE is no longer page-aligned for bottom-up mmap, causing
get_unmapped_area to choke on misaligned addressed.

This patch fixes the problem by defining TASK_UNMAPPED_BASE in terms of
TASK_SIZE and explicitly aligns the result to 16M, matching the other
end of the heap.
Acked-by: NNicolas Pitre <nico@linaro.org>
Reported-by: NSteve Capper <steve.capper@arm.com>
Reported-by: NJean-Francois Moine <moinejf@free.fr>
Reported-by: NChristoffer Dall <cdall@cs.columbia.edu>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Realview fails to boot with this warning:
BUG: spinlock lockup suspected on CPU#0, init/1
 lock: 0xcf8bde10, .magic: dead4ead, .owner: init/1, .owner_cpu: 0
Backtrace:
[<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:cf8bde10 r5:cf83d1c0 r4:cf8bde10 r3:cf83d1c0
[<c03294d0>] (dump_stack+0x0/0x1c) from [<c018926c>] (spin_dump+0x84/0x98)
[<c01891e8>] (spin_dump+0x0/0x98) from [<c0189460>] (do_raw_spin_lock+0x100/0x198)
[<c0189360>] (do_raw_spin_lock+0x0/0x198) from [<c032cbac>] (_raw_spin_lock+0x3c/0x44)
[<c032cb70>] (_raw_spin_lock+0x0/0x44) from [<c01c9224>] (pl011_console_write+0xe8/0x11c)
[<c01c913c>] (pl011_console_write+0x0/0x11c) from [<c002aea8>] (call_console_drivers.clone.7+0xdc/0x104)
[<c002adcc>] (call_console_drivers.clone.7+0x0/0x104) from [<c002b320>] (console_unlock+0x2e8/0x454)
[<c002b038>] (console_unlock+0x0/0x454) from [<c002b8b4>] (vprintk_emit+0x2d8/0x594)
[<c002b5dc>] (vprintk_emit+0x0/0x594) from [<c0329718>] (printk+0x3c/0x44)
[<c03296dc>] (printk+0x0/0x44) from [<c002929c>] (warn_slowpath_common+0x28/0x6c)
[<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029304>] (warn_slowpath_null+0x24/0x2c)
[<c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<c0070ab0>] (lockdep_trace_alloc+0xd8/0xf0)
[<c00709d8>] (lockdep_trace_alloc+0x0/0xf0) from [<c00c0850>] (kmem_cache_alloc+0x24/0x11c)
[<c00c082c>] (kmem_cache_alloc+0x0/0x11c) from [<c00bb044>] (__get_vm_area_node.clone.24+0x7c/0x16c)
[<c00bafc8>] (__get_vm_area_node.clone.24+0x0/0x16c) from [<c00bb7b8>] (get_vm_area_caller+0x48/0x54)
[<c00bb770>] (get_vm_area_caller+0x0/0x54) from [<c0020064>] (__alloc_remap_buffer.clone.15+0x38/0xb8)
[<c002002c>] (__alloc_remap_buffer.clone.15+0x0/0xb8) from [<c0020244>] (__dma_alloc+0x160/0x2c8)
[<c00200e4>] (__dma_alloc+0x0/0x2c8) from [<c00204d8>] (arm_dma_alloc+0x88/0xa0)[<c0020450>] (arm_dma_alloc+0x0/0xa0) from [<c00beb00>] (dma_pool_alloc+0xcc/0x1a8)
[<c00bea34>] (dma_pool_alloc+0x0/0x1a8) from [<c01a9d14>] (pl08x_fill_llis_for_desc+0x28/0x568)
[<c01a9cec>] (pl08x_fill_llis_for_desc+0x0/0x568) from [<c01aab8c>] (pl08x_prep_slave_sg+0x258/0x3b0)
[<c01aa934>] (pl08x_prep_slave_sg+0x0/0x3b0) from [<c01c9f74>] (pl011_dma_tx_refill+0x140/0x288)
[<c01c9e34>] (pl011_dma_tx_refill+0x0/0x288) from [<c01ca748>] (pl011_start_tx+0xe4/0x120)
[<c01ca664>] (pl011_start_tx+0x0/0x120) from [<c01c54a4>] (__uart_start+0x48/0x4c)
[<c01c545c>] (__uart_start+0x0/0x4c) from [<c01c632c>] (uart_start+0x2c/0x3c)
[<c01c6300>] (uart_start+0x0/0x3c) from [<c01c795c>] (uart_write+0xcc/0xf4)
[<c01c7890>] (uart_write+0x0/0xf4) from [<c01b0384>] (n_tty_write+0x1c0/0x3e4)
[<c01b01c4>] (n_tty_write+0x0/0x3e4) from [<c01acfe8>] (tty_write+0x144/0x240)
[<c01acea4>] (tty_write+0x0/0x240) from [<c01ad17c>] (redirected_tty_write+0x98/0xac)
[<c01ad0e4>] (redirected_tty_write+0x0/0xac) from [<c00c371c>] (vfs_write+0xbc/0x150)
[<c00c3660>] (vfs_write+0x0/0x150) from [<c00c39c0>] (sys_write+0x4c/0x78)
[<c00c3974>] (sys_write+0x0/0x78) from [<c0014460>] (ret_fast_syscall+0x0/0x3c)

This happens because the DMA allocation code is not respecting atomic
allocations correctly.

GFP flags should not be tested for GFP_ATOMIC to determine if an
atomic allocation is being requested.  GFP_ATOMIC is not a flag but
a value.  The GFP bitmask flags are all prefixed with __GFP_.

The rest of the kernel tests for __GFP_WAIT not being set to indicate
an atomic allocation.  We need to do the same.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Realview EB with a rev B MPcore tile results in lots of warnings at
boot because it can't allocate enough IRQs.  Fix this by increasing
the number of available IRQs.

WARNING: at /home/rmk/git/linux-rmk/arch/arm/common/gic.c:757 gic_init_bases+0x12c/0x2ec()
Cannot allocate irq_descs @ IRQ96, assuming pre-allocated
Modules linked in:
Backtrace:
[<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:000002f5 r5:c042c62c r4:c044ff40 r3:c045f240
[<c03294d0>] (dump_stack+0x0/0x1c) from [<c00292c8>] (warn_slowpath_common+0x54/0x6c)
[<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029384>] (warn_slowpath_fmt+0x38/0x40)
[<c002934c>] (warn_slowpath_fmt+0x0/0x40) from [<c042c62c>] (gic_init_bases+0x12c/0x2ec)
[<c042c500>] (gic_init_bases+0x0/0x2ec) from [<c042cdc8>] (gic_init_irq+0x8c/0xd8)
[<c042cd3c>] (gic_init_irq+0x0/0xd8) from [<c042827c>] (init_IRQ+0x1c/0x24)
[<c0428260>] (init_IRQ+0x0/0x24) from [<c04256c8>] (start_kernel+0x1a4/0x300)
[<c0425524>] (start_kernel+0x0/0x300) from [<70008070>] (0x70008070)
---[ end trace 1b75b31a2719ed1c ]---
------------[ cut here ]------------
WARNING: at /home/rmk/git/linux-rmk/kernel/irq/irqdomain.c:234 irq_domain_add_legacy+0x80/0x140()
Modules linked in:
Backtrace:
[<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:000000ea r5:c0081a38 r4:00000000 r3:c045f240
[<c03294d0>] (dump_stack+0x0/0x1c) from [<c00292c8>] (warn_slowpath_common+0x54/0x6c)
[<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029304>] (warn_slowpath_null+0x24/0x2c)
[<c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<c0081a38>] (irq_domain_add_legacy+0x80/0x140)
[<c00819b8>] (irq_domain_add_legacy+0x0/0x140) from [<c042c64c>] (gic_init_bases+0x14c/0x2ec)
[<c042c500>] (gic_init_bases+0x0/0x2ec) from [<c042cdc8>] (gic_init_irq+0x8c/0xd8)
[<c042cd3c>] (gic_init_irq+0x0/0xd8) from [<c042827c>] (init_IRQ+0x1c/0x24)
[<c0428260>] (init_IRQ+0x0/0x24) from [<c04256c8>] (start_kernel+0x1a4/0x300)
[<c0425524>] (start_kernel+0x0/0x300) from [<70008070>] (0x70008070)
---[ end trace 1b75b31a2719ed1d ]---
------------[ cut here ]------------
WARNING: at /home/rmk/git/linux-rmk/arch/arm/common/gic.c:762 gic_init_bases+0x170/0x2ec()
Modules linked in:
Backtrace:
[<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:000002fa r5:c042c670 r4:00000000 r3:c045f240
[<c03294d0>] (dump_stack+0x0/0x1c) from [<c00292c8>] (warn_slowpath_common+0x54/0x6c)
[<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029304>] (warn_slowpath_null+0x24/0x2c)
[<c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<c042c670>] (gic_init_bases+0x170/0x2ec)
[<c042c500>] (gic_init_bases+0x0/0x2ec) from [<c042cdc8>] (gic_init_irq+0x8c/0xd8)
[<c042cd3c>] (gic_init_irq+0x0/0xd8) from [<c042827c>] (init_IRQ+0x1c/0x24)
[<c0428260>] (init_IRQ+0x0/0x24) from [<c04256c8>] (start_kernel+0x1a4/0x300)
[<c0425524>] (start_kernel+0x0/0x300) from [<70008070>] (0x70008070)
---[ end trace 1b75b31a2719ed1e ]---
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Punit Agrawal reports:
> I was trying to boot 3.8-rc5 on Realview EB 11MPCore using
> realview-smp_defconfig as a starting point but the kernel failed to
> progress past the log below (config attached).
>
> Pawel suggested I try reverting 384a2902 - "ARM: gic: use a private
> mapping for CPU target interfaces" that you've authored. With this
> commit reverted the kernel boots.
>
> I am not quite sure why the commit breaks 11MPCore but Pawel (cc'd)
> might be able to shed light on that.

Some early GIC implementations return zero for the first distributor
CPU routing register.  This means we can't rely on that telling us
which CPU interface we're connected to.  We know that these platforms
implement PPIs for IRQs 29-31 - but we shouldn't assume that these
will always be populated.

So, instead, scan for a non-zero CPU routing register in the first
32 IRQs and use that as our CPU mask.
Reported-by: NPunit Agrawal <punit.agrawal@arm.com>
Reviewed-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The PCI IRQs were regressing due to two things:

- The PCI glue layer was using an hard-coded IRQ 27 offset.
  This caused the immediate regression.

- The SIC IRQ mask was inverted (i.e. a bit was indeed set to
  one for each valid IRQ on the SIC, but accidentally inverted
  in the init call). This has been around forever, but we have
  been saved by some other forgiving code that would reserve
  IRQ descriptors in this range, as the versatile is
  non-sparse.

When the IRQs were bumped up 32 steps so as to avoid using IRQ
zero and avoid touching the 16 legacy IRQs, things broke.

Introduce an explicit valid mask for the IRQs that are active
on the PIC/SIC, and pass that. Use the BIT() macro from
<linux/bitops.h> to make sure we hit the right bits, readily
defined in <mach/platform.h>.
Reported-by: NTetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Commit 91c2ebb9 (ARM: 7114/1: cache-l2x0: add resume entry for l2
in secure mode) added resume entry for l2 in secure mode, but it missed
the dummy entry when CONFIG_CACHE_L2X0 is not set.

(Commit text edited by rmk.)
Signed-off-by: NBarry Song <Baohua.Song@csr.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Since pinctrl-exynos can support exynos4 and exynos5 so changed
the option name to PINCTRL_EXYNOS for more clarity.

Cc: Thomas Abraham <Thomas.abraham@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Add AB8540 sub driver to the ABx500 family, pins, pin groups and
gpio range.

As the pin controller (also the ABx500 controllers) is an
inherent part of the SoC and will prevent boot if not
available, select this from the Ux500 SoC Kconfig.
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPatrice Chotard <patrice.chotard@stericsson.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Add AB9540 sub driver to the ABx500 family, pins, pin groups and
gpio range.

As the pin controller (also the ABx500 controllers) is an
inherent part of the SoC and will prevent boot if not
available, select this from the Ux500 SoC Kconfig.
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPatrice Chotard <patrice.chotard@stericsson.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Add AB8505 sub driver to the ABx5x family.

As the pin controller (also the ABx500 controllers) is an
inherent part of the SoC and will prevent boot if not
available, select this from the Ux500 SoC Kconfig.
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPatrice Chotard <patrice.chotard@stericsson.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

policy->shared_type field was added only for SoCs with ACPI support:

commit 3b2d9942
Author: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date:   Wed Dec 14 15:05:00 2005 -0500

    P-state software coordination for ACPI core

    http://bugzilla.kernel.org/show_bug.cgi?id=5737

Many non-ACPI systems are filling this field by mistake, which makes its usage
confusing. Lets clean it.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

For multicore SoC's, with cores sharing clock line, we are required to set
policy->cpus and policy->related_cpus with mask of cpus.

With following patch, we need to set policy->cpus with mask of all possible cpus
and policy->related_cpus would be filled automatically by the cpufreq core.

commit 4948b355e90080cd5ec1e91189f65a01e4186ef2
Author: Viresh Kumar <viresh.kumar@linaro.org>
Date:   Tue Jan 29 14:39:08 2013 +0000

    cpufreq: Simplify cpufreq_add_dev()

Current Tegra driver fills only ->related_cpus and not ->cpus, which looks to be
incorrect. Lets fix it.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Highbank processors depend on the external ECME to perform voltage
management based on a requested frequency. Communication between the
A9 cores and the ECME happens over the pl320 IPC channel.
Signed-off-by: NMark Langsdorf <mark.langsdorf@calxeda.com>
Reviewed-by: NShawn Guo <shawn.guo@linaro.org>
Reviewed-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The pl320 IPC allows for interprocessor communication between the
highbank A9 and the EnergyCore Management Engine. The pl320 implements
a straightforward mailbox protocol.
Signed-off-by: NMark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Move clk setup to twd_local_timer_common_register and rely on
twd_timer_rate being 0 to force calibration if there is no clock.
Remove common_setup_called as it is no longer needed.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NMark Langsdorf <mark.langsdorf@calxeda.com>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The Allwinner A10 has 9 banks of 32 GPIOs available, so it doesn't fit
in the usual 256 limit set by gpio.h. Increase this number to 288.
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

With commit a0ae0240 (ARM: kernel: add device tree init map function),
the cpu id value may include the cluster id and is no longer 0-3, so we
need to mask it now to get the right hard cpu index.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>

With commit a0ae0240 (ARM: kernel: add device tree init map function),
the cpu id value may include the cluster id and is no longer 0-3, so we
need to mask it in scu_power_mode to get the local cpu number. Since we
are only dealing with the cpu we are running on, the cluster id should
not ever be needed.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>

Add an empty version of scu_enable for !SMP builds. This fixes
compile error for highbank suspend code on !SMP builds.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>

This adds a subdriver for the AB8500 pinctrl portions.
As the pin controller (also the ABx500 controllers) is an
inherent part of the SoC and will prevent boot if not
available, select this from the Ux500 SoC Kconfig.
Acked-by: NOlof Johansson <olof@lixom.net>
Reviewed-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>