Change the names of the three socket callback functions to make it
more obvious they're specifically associated with a connection's
socket (not the ceph connection that uses it).
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NYehuda Sadeh <yehuda@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

No code sets a bad_proto method in its ceph connection operations
vector, so just get rid of it.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NYehuda Sadeh <yehuda@inktank.com>

The ceph connection state "DEAD" is never set and is therefore not
needed.  Eliminate it.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NYehuda Sadeh <yehuda@inktank.com>

Usually, we are adding pg_temp entries or removing them.  Occasionally they
update.  In that case, osdmap_apply_incremental() was failing because the
rbtree entry already exists.

Fix by removing the existing entry before inserting a new one.

Fixes http://tracker.newdream.net/issues/2446Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

There is a race between two __unregister_request() callers: the
reply path and the ceph_osdc_wait_request().  If we get a reply
*and* the timeout expires at roughly the same time, both callers
will try to unregister the request, and the second one will do bad
things.

Simply check if the request is still already unregistered; if so,
return immediately and do nothing.

Fixes http://tracker.newdream.net/issues/2420Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

Move the addition of the authorizer buffer to a connection's
out_kvec out of get_connect_authorizer() and into its caller.  This
way, the caller--prepare_write_connect()--can avoid adding the
connect header to out_kvec before it has been fully initialized.

Prior to this patch, it was possible for a connect header to be
sent over the wire before the authorizer protocol or buffer length
fields were initialized.  An authorizer buffer associated with that
header could also be queued to send only after the connection header
that describes it was on the wire.

Fixes http://tracker.newdream.net/issues/2424Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Change the name of prepare_connect_authorizer().  The next
patch is going to make this function no longer add anything to the
connection's out_kvec, so it will no longer fit the pattern of
the rest of the prepare_connect_*() functions.

In addition, pass the address of a variable that will hold the
authorization protocol to use.  Move the assignment of that to the
connection's out_connect structure into prepare_write_connect().
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Change prepare_connect_authorizer() so it returns a pointer (or
pointer-coded error).
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Rather than passing a bunch of arguments to be filled in with the
content of the ceph_auth_handshake buffer now returned by the
get_authorizer method, just use the returned information in the
caller, and drop the unnecessary arguments.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Have the get_authorizer auth_client method return a ceph_auth
pointer rather than an integer, pointer-encoding any returned
error value.  This is to pave the way for making use of the
returned value in an upcoming patch.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

In the create_authorizer method for both the mds and osd clients,
the auth_client->ops pointer is blindly dereferenced.  There is no
obvious guarantee that this pointer has been assigned.  And
furthermore, even if the ops pointer is non-null there is definitely
no guarantee that the create_authorizer or destroy_authorizer
methods are defined.

Add checks in both routines to make sure they are defined (non-null)
before use.  Add similar checks in a few other spots in these files
while we're at it.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Make use of the new ceph_auth_handshake structure in order to reduce
the number of arguments passed to the create_authorizor method in
ceph_auth_client_ops.  Use a local variable of that type as a
shorthand in the get_authorizer method definitions.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

The definitions for the ceph_mds_session and ceph_osd both contain
five fields related only to "authorizers."  Encapsulate those fields
into their own struct type, allowing for better isolation in some
upcoming patches.

Fix the #includes in "linux/ceph/osd_client.h" to lay out their more
complete canonical path.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

In prepare_connect_authorizer(), a connection's get_authorizer
method is called but ignores its return value.  This function can
return an error, so check for it and return it if that ever occurs.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Change prepare_connect_authorizer() so it returns without dropping
the connection mutex if the connection has no get_authorizer method.

Use the symbolic CEPH_AUTH_UNKNOWN instead of 0 when assigning
authorization protocols.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

prepare_write_connect() can return an error, but only one of its
callers checks for it.  All the rest are in functions that already
return errors, so it should be fine to return the error if one
gets returned.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

prepare_write_connect() prepares a connect message, then sets
WRITE_PENDING on the connection.  Then *after* this, it calls
prepare_connect_authorizer(), which updates the content of the
connection buffer already queued for sending.  It's also possible it
will result in prepare_write_connect() returning -EAGAIN despite the
WRITE_PENDING big getting set.

Fix this by preparing the connect authorizer first, setting the
WRITE_PENDING bit only after that is done.

Partially addresses http://tracker.newdream.net/issues/2424Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

In all cases, the value passed as the msgr argument to
prepare_write_connect() is just con->msgr.  Just get the msgr
value from the ceph connection and drop the unneeded argument.

The only msgr passed to prepare_write_banner() is also therefore
just the one from con->msgr, so change that function to drop the
msgr argument as well.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

prepare_write_connect() has an argument indicating whether a banner
should be sent out before sending out a connection message.  It's
only ever set in one of its callers, so move the code that arranges
to send the banner into that caller and drop the "include_banner"
argument from prepare_write_connect().
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Reset a connection's kvec fields in the caller rather than in
prepare_write_connect().   This ends up repeating a few lines of
code but it's improving the separation between distinct operations
on the connection, which we can take advantage of later.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Move the kvec reset for a connection out of prepare_write_banner and
into its only caller.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Make the second argument to read_partial() be the ending input byte
position rather than the beginning offset it now represents.  This
amounts to moving the addition "to + size" into the caller.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

read_partial() always increases whatever "to" value is supplied by
adding the requested size to it, and that's the only thing it does
with that pointed-to value.

Do that pointer advance in the caller (and then only when the
updated value will be subsequently used), and change the "to"
parameter to be an in-only and non-pointer value.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

There are two blocks of code in read_partial_message()--those that
read the header and footer of the message--that can be replaced by a
call to read_partial().  Do that.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

From Al Viro <viro@zeniv.linux.org.uk>

Al Viro noticed that we were using a non-cpu-encoded value in
a switch statement in osd_req_encode_op().  The result would
clearly not work correctly on a big-endian machine.
Signed-off-by: NAlex Elder <elder@dreamhost.com>

If we get an error code from crush_do_rule(), print an error to the
console.
Reviewed-by: NAlex Elder <elder@inktank.com>
Signed-off-by: NSage Weil <sage@inktank.com>

Reflects ceph.git commit 46d63d98434b3bc9dad2fc9ab23cbaedc3bcb0e4.
Reported-by: NAlexander Lyakas <alex.bolshoy@gmail.com>
Reviewed-by: NAlex Elder <elder@inktank.com>
Signed-off-by: NSage Weil <sage@inktank.com>

Fix the node weight lookup for tree buckets by using a correct accessor.

Reflects ceph.git commit d287ade5bcbdca82a3aef145b92924cf1e856733.
Reviewed-by: NAlex Elder <elder@inktank.com>
Signed-off-by: NSage Weil <sage@inktank.com>

These were used for the ill-fated forcefeed feature.  Remove them.

Reflects ceph.git commit ebdf80edfecfbd5a842b71fbe5732857994380c1.
Reviewed-by: NAlex Elder <elder@inktank.com>
Signed-off-by: NSage Weil <sage@inktank.com>

Remove forcefeed functionality from CRUSH.  This is an ugly misfeature that
is mostly useless and unused.  Remove it.

Reflects ceph.git commit ed974b5000f2851207d860a651809af4a1867942.
Reviewed-by: NAlex Elder <elder@inktank.com>
Signed-off-by: NSage Weil <sage@inktank.com>

Conflicts:

	net/ceph/crush/mapper.c

Use a temporary variable here to avoid repeated array lookups and clean up
the code a bit.

This reflects ceph.git commit 6b5be27634ad307b471a5bf0db85c4f5c834885f.
Reviewed-by: NAlex Elder <elder@inktank.com>
Signed-off-by: NSage Weil <sage@inktank.com>

If we get a map that doesn't make sense, error out or ignore the badness
instead of BUGging out.  This reflects the ceph.git commits
9895f0bff7dc68e9b49b572613d242315fb11b6c and
8ded26472058d5205803f244c2f33cb6cb10de79.
Reviewed-by: NAlex Elder <elder@inktank.com>
Signed-off-by: NSage Weil <sage@inktank.com>

This small adjustment reflects a change that was made in ceph.git commit
af6a9f30696c900a2a8bd7ae24e8ed15fb4964bb, about 6 months ago.  An N-1
search is not exhaustive.  Fixed ceph.git bug #1594.
Reviewed-by: NAlex Elder <elder@inktank.com>
Signed-off-by: NSage Weil <sage@inktank.com>

Move various types from int -> __u32 (or similar), and add const as
appropriate.

This reflects changes that have been present in the userland implementation
for some time.
Reviewed-by: NAlex Elder <elder@inktank.com>
Signed-off-by: NSage Weil <sage@inktank.com>

This was an ill-conceived feature that has been removed from Ceph.  Do
this gracefully:

 - reject attempts to specify a preferred_osd via the ioctl
 - stop exposing this information via virtual xattrs
 - always fill in -1 for requests, in case we talk to an older server
 - don't calculate preferred_osd placements/pgids
Reviewed-by: NAlex Elder <elder@inktank.com>
Signed-off-by: NSage Weil <sage@inktank.com>

In write_partial_msg_pages(), every case now does an identical call
to kmap(page).  Instead, just call it once inside the CRC-computing
block where it's needed.  Move the definition of kaddr inside that
block, and make it a (char *) to ensure portable pointer arithmetic.

We still don't kunmap() it until after the sendpage() call, in case
that also ends up needing to use the mapping.
Signed-off-by: NAlex Elder <elder@dreamhost.com>
Reviewed-by: NSage Weil <sage@newdream.net>

In write_partial_msg_pages() there is a local variable used to
track the starting offset within a bio segment to use.  Its name,
"page_shift" defies the Linux convention of using that name for
log-base-2(page size).

Since it's only used in the bio case rename it "bio_offset".  Use it
along with the page_pos field to compute the memory offset when
computing CRC's in that function.  This makes the bio case match the
others more closely.
Signed-off-by: NAlex Elder <elder@dreamhost.com>
Reviewed-by: NSage Weil <sage@newdream.net>

There's not a lot of benefit to zero_page_address, which basically
holds a mapping of the zero page through the life of the messenger
module.  Even with our own mapping, the sendpage interface where
it's used may need to kmap() it again.  It's almost certain to
be in low memory anyway.

So stop treating the zero page specially in write_partial_msg_pages()
and just get rid of zero_page_address entirely.
Signed-off-by: NAlex Elder <elder@dreamhost.com>
Reviewed-by: NSage Weil <sage@newdream.net>

Make ceph_tcp_sendpage() be the only place kernel_sendpage() is
used, by using this helper in write_partial_msg_pages().
Signed-off-by: NAlex Elder <elder@dreamhost.com>
Reviewed-by: NSage Weil <sage@newdream.net>

If a message queued for send gets revoked, zeroes are sent over the
wire instead of any unsent data.  This is done by constructing a
message and passing it to kernel_sendmsg() via ceph_tcp_sendmsg().

Since we are already working with a page in this case we can use
the sendpage interface instead.  Create a new ceph_tcp_sendpage()
helper that sets up flags to match the way ceph_tcp_sendmsg()
does now.
Signed-off-by: NAlex Elder <elder@dreamhost.com>
Reviewed-by: NSage Weil <sage@newdream.net>