Change all the code that deals directly with ICMPv6 type and code
values to use u8 instead of a signed int as that's the actual data
type.
Signed-off-by: NBrian Haley <brian.haley@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

struct will be kfreed in a moment, so...
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Al Viro spotted a bogus use of u64 on the input sequence number which
is big-endian.  This patch fixes it by giving the input sequence number
its own member in the xfrm_skb_cb structure.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Let's nip the code duplication in the bud :)
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a number of new IPsec audit events to meet the auditing
requirements of RFC4303.  This includes audit hooks for the following events:

 * Could not find a valid SA [sections 2.1, 3.4.2]
   . xfrm_audit_state_notfound()
   . xfrm_audit_state_notfound_simple()

 * Sequence number overflow [section 3.3.3]
   . xfrm_audit_state_replay_overflow()

 * Replayed packet [section 3.4.3]
   . xfrm_audit_state_replay()

 * Integrity check failure [sections 3.4.4.1, 3.4.4.2]
   . xfrm_audit_state_icvfail()

While RFC4304 deals only with ESP most of the changes in this patch apply to
IPsec in general, i.e. both AH and ESP.  The one case, integrity check
failure, where ESP specific code had to be modified the same was done to the
AH code for the sake of consistency.
Signed-off-by: NPaul Moore <paul.moore@hp.com>
Acked-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch releases the lock on the state before calling
x->type->input.  It also adds the lock to the spots where they're
currently needed.

Most of those places (all except mip6) are expected to disappear with
async crypto.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Similar to the moving out of the replay processing on the output, this
patch moves the integrity stat collectin from x->type->input into
xfrm_input.

This would eventually allow transforms such as AH/ESP to be lockless.

The error value EBADMSG (currently unused in the crypto layer) is used
to indicate a failed integrity check.  In future this error can be
directly returned by the crypto layer once we switch to aead
algorithms.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Not architecture specific code should not #include <asm/scatterlist.h>.

This patch therefore either replaces them with
#include <linux/scatterlist.h> or simply removes them if they were
unused.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Signed-off-by: NMasahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Combining RO and AH/ESP/IPCOMP does not make sense.  So this patch adds a
check in the state initialisation function to prevent this.

This allows us to safely remove the mode input function of RO since it
can never be called anymore.  Indeed, if somehow it does get called we'll
know about it through an OOPS instead of it slipping past silently.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Not every transform needs to zap ip_summed.  For example, a pure tunnel
mode encapsulation does not affect the hardware checksum at all.  In fact,
every algorithm (that needs this) other than AH6 already does its own
ip_summed zapping.

This patch moves the zapping into AH6 which is in line with what IPv4 does.

Possible future optimisation: Checksum the data as we copy them in IPComp.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch removes the duplicate ipv6_{auth,esp,comp}_hdr structures since
they're identical to the IPv4 versions.  Duplicating them would only create
problems for ourselves later when we need to add things like extended
sequence numbers.

I've also added transport header type conversion headers for these types
which are now used by the transforms.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch changes the calling convention so that on entry from
x->mode->output and before entry into x->type->output skb->data
will point to the payload instead of the IP header.

This is essentially a redistribution of skb_push/skb_pull calls
with the aim of minimising them on the common path of tunnel +
ESP.

It'll also let us use the same calling convention between IPv4
and IPv6 with the next patch.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch releases the lock on the state before calling x->type->output.
It also adds the lock to the spots where they're currently needed.

Most of those places (all except mip6) are expected to disappear with
async crypto.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Current the x->mode->output functions store the IPv6 nh pointer in the
skb network header.  This is inconvenient because the network header then
has to be fixed up before the packet can leave the IPsec stack.  The mac
header field is unused on output so we can use that to store this instead.

This patch does that and removes the network header fix-up in xfrm_output.

It also uses ipv6_hdr where appropriate in the x->type->output functions.

There is also a minor clean-up in esp4 to make it use the same code as
esp6 to help any subsequent effort to merge the two.

Lastly it kills two redundant skb_set_* statements in BEET that were
simply copied over from transport mode.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The replay counter is one of only two remaining things in the output code
that requires a lock on the xfrm state (the other being the crypto).  This
patch moves it into the generic xfrm_output so we can remove the lock from
the transforms themselves.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The keys are only used during initialisation so we don't need to carry them
in esp_data.  Since we don't have to allocate them again, there is no need
to place a limit on the authentication key length anymore.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is clean-up for XFRM type modules and adds aliases with its
protocol:
 ESP, AH, IPCOMP, IPIP and IPv6 for IPsec
 ROUTING and DSTOPTS for MIPv6

It is almost the same thing as XFRM mode alias, but it is added
new defines XFRM_PROTO_XXX for preprocessing since some protocols
are defined as enum.
Signed-off-by: NMasahide NAKAMURA <nakam@linux-ipv6.org>
Acked-by: NIngo Oeser <netdev@axxeo.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch makes MIPv6 loadable module named "mip6".

Here is a modprobe.conf(5) example to load it automatically
when user application uses XFRM state for MIPv6:

alias xfrm-type-10-43 mip6
alias xfrm-type-10-60 mip6

Some MIPv6 feature is not included by this modular, however,
it should not be affected to other features like either IPsec
or IPv6 with and without the patch.
We may discuss XFRM, MH (RAW socket) and ancillary data/sockopt
separately for future work.

Loadable features:
* MH receiving check (to send ICMP error back)
* RO header parsing and building (i.e. RH2 and HAO in DSTOPTS)
* XFRM policy/state database handling for RO

These are NOT covered as loadable:
* Home Address flags and its rule on source address selection
* XFRM sub policy (depends on its own kernel option)
* XFRM functions to receive RO as IPv6 extension header
* MH sending/receiving through raw socket if user application
  opens it (since raw socket allows to do so)
* RH2 sending as ancillary data
* RH2 operation with setsockopt(2)
Signed-off-by: NMasahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Kill unnecessary CONFIG_IPV6_MIP6.

o It is redundant for RAW socket to keep MH out with the config then
  it can handle any protocol.
o Clean-up at AH.
Signed-off-by: NMasahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NKazunori MIYAZAWA <miyazawa@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Renaming skb->h to skb->transport_header, skb->nh to skb->network_header and
skb->mac to skb->mac_header, to match the names of the associated helpers
(skb[_[re]set]_{transport,network,mac}_header).
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For the places where we need a pointer to the transport header, it is
still legal to touch skb->h.raw directly if just adding to,
subtracting from or setting it to another layer header.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For the cases where the transport header is being set to a offset from
skb->data.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now the skb->nh union has just one member, .raw, i.e. it is just like the
skb->mac union, strange, no? I'm just leaving it like that till the transport
layer is done with, when we'll rename skb->mac.raw to skb->mac_header (or
->mac_header_offset?), ditto for ->{h,nh}.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For the places where we need a pointer to the network header, it is still legal
to touch skb->nh.raw directly if just adding to, subtracting from or setting it
to another layer header.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Code diff stats:

[acme@newtoy net-2.6.20]$ codiff /tmp/ipv6.ko.before /tmp/ipv6.ko.after
/pub/scm/linux/kernel/git/acme/net-2.6.20/net/ipv6/ip6_output.c:
  ip6_output      |  -52
  ip6_append_data |   +2
 2 functions changed, 2 bytes added, 52 bytes removed

/pub/scm/linux/kernel/git/acme/net-2.6.20/net/ipv6/addrconf.c:
  addrconf_sysctl_register |  -27
 1 function changed, 27 bytes removed

/pub/scm/linux/kernel/git/acme/net-2.6.20/net/ipv6/tcp_ipv6.c:
  tcp_v6_syn_recv_sock  |  -32
  tcp_v6_parse_md5_keys |  -24
 2 functions changed, 56 bytes removed

/tmp/ipv6.ko.after:
 5 functions changed, 2 bytes added, 135 bytes removed
[acme@newtoy net-2.6.20]$
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- Remove redundant code.  Pointed out by Brian Haley <brian.haley@hp.com>.
- Unify code paths with/without CONFIG_IPV6_MIP.
- Use NIP6_FMT for IPv6 address textual presentation.
- Fold long line.  Pointed out by David Miller <davem@davemloft.net>.
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

Mobile IPv6 defines home address option as an option of destination
options header. It is placed before fragment header then
ip6_find_1stfragopt() is fixed to know about it.

Home address option also carries final source address of the flow,
then outbound AH calculation should take care of it like routing
header case.  Based on MIPL2 kernel patch.
Signed-off-by: NMasahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On current kernel, ip6_find_1stfragopt() is used by IPv6 IPsec to find
offset to be inserted header in outbound for transport mode. (BTW, no
usage may be needed for IPv4 case.)  Mobile IPv6 requires another
logic for routing header and destination options header
respectively. This patch is common platform for the offset and adopts
it to IPsec.

Based on MIPL2 kernel patch.
Signed-off-by: NMasahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Transformation mode is used as either IPsec transport or tunnel.
It is required to add two more items, route optimization and inbound trigger
for Mobile IPv6.
Based on MIPL2 kernel patch.

This patch was also written by: Ville Nuorvala <vnuorval@tcs.hut.fi>
Signed-off-by: NMasahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch converts IPsec to use the new HMAC template.  The names of
existing simple digest algorithms may still be used to refer to their
HMAC composites.

The same structure can be used by other MACs such as AES-XCBC-MAC.

This patch also switches from the digest interface to hash.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>