As SPI platform devices are consolidated to plat-samsung, some
corresponding changes are required in the respective machine folder.
Added SPI Setup file for GPIO configurations and platform data
initialization.
Signed-off-by: NPadmavathi Venna <padma.v@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

As SPI platform devices are consolidated to plat-samsung, some
corresponding changes are required in the respective machine folder.
Setup files are added for SPI GPIO configurations and platform data
initialization.
Signed-off-by: NPadmavathi Venna <padma.v@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

SPI platform device definitions consolidated from respective machine
folder to plat-samsung
Signed-off-by: NPadmavathi Venna <padma.v@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

SPI bus clocks can be avoided passing through platform
data as spi driver is getting the bus clock using the
generic clock connection id registered via clkdev.
Signed-off-by: NPadmavathi Venna <padma.v@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Registered the SPI bus clocks with clkdev using generic
connection id.
Signed-off-by: NPadmavathi Venna <padma.v@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Registered the SPI bus clocks with clkdev using generic
connection id.
Signed-off-by: NPadmavathi Venna <padma.v@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Registered the SPI bus clocks with clkdev using generic
connection id.
Signed-off-by: NPadmavathi Venna <padma.v@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Registered the SPI bus clocks with clkdev using generic
connection id.
Signed-off-by: NPadmavathi Venna <padma.v@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch modifies the driver to stop depending on the
clock names being passed from platform and switch over
to lookup clocks generic names using clkdev
Signed-off-by: NPadmavathi Venna <padma.v@samsung.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch modifies the driver to stop depending on the clock names
being passed from the platform and switch over to bus clock lookup
using generic clock names.
Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: NChris Ball <cjb@laptop.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Add support for lookup of sdhci-s3c controller clocks using generic names
for s3c2416, s3c64xx, s5pc100, s5pv210 and exynos4 SoC's.
Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com>
[kgene.kim@samsung.com: fixed trailing whitespace]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The bus clocks previously sent through platform data to SDHCI controller
are removed.
Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Add initial dts file for EXYNOS4210 SoC. This dts file describes
the SoC specific devices and properties. Along with this, add dts
file for Samsung's SMDKV310 board and Insignal's ORIGEN board which
uses the EXYNOS4210 dts file and extends it to describe the board
specific properties.
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Add a new EXYNOS4 compatible device tree enabled board file. Boards
based on the EXYNOS4 family of SoC's can use this as the machine/board
file. When using this machine fike, a corresponding device tree blob
which describes the board's properties should be supplied at boot time
to the kernel.
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Add device tree based discovery support for Samsung's rtc controller.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Add device tree based discovery support for Samsung's keypad controller.

Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

With the 'struct dma_pl330_peri' removed, the platfrom data for dma
driver can be simplified to a simple list of peripheral request ids.

Cc: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: NBoojin Kim <boojin.kim@samsung.com>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

With the 'struct dma_pl330_peri' removed, the platfrom data for dma
driver can be simplified to a simple list of peripheral request ids.

Cc: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: NBoojin Kim <boojin.kim@samsung.com>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

With the 'struct dma_pl330_peri' removed, the platfrom data for dma
driver can be simplified to a simple list of peripheral request ids.

Cc: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Boojin Kim <boojin.kim@samsung.com>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

PDMA controllers when instantiated from device tree are registered using
amba_device_register(). The registration process enables clock to the
controllers to read the peripheral id of the PDMA amba device.

In case of Exynos4, the clocks to the PDMA controllers are named as 'dma'
but amba_device_register() looks up the clock using the name 'apb_pclk'.
Hence, alias clocks with name 'apb_pclk' clock are created for clocks
with name 'dma'.
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The pl330 device instances and associated platform data is required only
for non-device-tree builds. With device tree enabled, the data about the
platform is obtained from the device tree. For images that include both
dt and non-dt platforms, an addditional check is added to ensure that
static amba device registrations is applicable to only non-dt platforms.

Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

A new dma request id 'DMACH_DT_PROP' is introduced for client drivers
requesting a dma channel. This request indicates that a device tree
node property represting the dma channel is available in
'struct samsung_dma_info'. The dma channel request wrapper uses the
node property value as the value for the filter parameter.
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

For PL330 dma controllers instantiated from device tree, the channel
lookup is based on phandle of the dma controller and dma request id
specified by the client node. During probe, the private data of each
channel of the controller is set to point to the device node of the
dma controller. The 'chan_id' of the each channel is used as the
dma request id.

Client driver requesting dma channels specify the phandle of the
dma controller and the request id. The pl330 filter function
converts the phandle to the device node pointer and matches that
with channel's private data. If a match is found, the request id
from the client node and the 'chan_id' of the channel is matched.
A channel is found if both the values match.
Acked-by: NJassi Brar <jassisinghbrar@gmail.com>
Acked-by: NBoojin Kim <boojin.kim@samsung.com>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Reviewed-by: NRob Herring <rob.herring@calxeda.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

With the 'struct dma_pl330_peri' removed, the platfrom data for dma
driver can be simplified to a simple list of peripheral request ids.

Cc: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: NBoojin Kim <boojin.kim@samsung.com>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The transfer direction for a channel can be inferred from the transfer
request and the need for specifying transfer direction in platfrom data
can be eliminated. So the structure definition 'struct dma_pl330_peri'
is no longer required.

The channel's private data is set to point to a channel id specified in
the platform data (instead of an instance of type 'struct dma_pl330_peri').
The filter function is correspondingly modified to match the channel id.

With the 'struct dma_pl330_peri' removed from platform data, the dma
controller transfer capabilities cannot be inferred any more. Hence,
the dma controller capabilities is specified using platform data.
Acked-by: NJassi Brar <jassisinghbrar@gmail.com>
Acked-by: NBoojin Kim <boojin.kim@samsung.com>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The dma channel selection filter function is moved from plat-samsung
into the pl330 driver. In additon to that, a check is added in the
filter function to ensure that the channel on which the filter has
been invoked is pl330 channel instance (and avoid any incorrect
access of chan->private in a system with multiple types of DMA
drivers).
Suggested-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NJassi Brar <jassisinghbrar@gmail.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

exynos4120_serial_drv_data is only defined when building with support
for Exynos4210 so use the already provided define to ensure that we
don't reference it when building for other SoCs.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
[kgene.kim@samsung.com: Fixed build warning]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Add device tree based discovery support for Samsung's uart controller.

Cc: Ben Dooks <ben-linux@fluff.org>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

With reset port, set clock and get clock functions in SoC specific extentions
being removed, only the driver probe is left over in these extensions. The
probe function itself can be merged into one and moved into the samsung common
serial driver. With driver probe also moved, all the SoC specific extentions
are no longer required and they are deleted.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The port reset function in each of the platform specific extension performs
the same operations and hence all the reset port functions can be merged into
one and moved into the common samsung uart driver. The SoC specific port reset
functions are removed from SoC extensions.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Samsung uart driver lookups the clock using the connection id 'clk_uart_baud'.
The uart clocks for all Samsung platforms are reorganized to register them
with the lookup name as required by the uart driver.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

With clkdev based clock lookup support, the clock set and get operation
using clock names communicated between the samsung uart driver and the
SoC specific extension can be removed.

In addition to that, for each platform specific extension, add the
default clock selection, number of clock options for uart baud generator,
clock selection bit mask and shift values which is required by the
clkdev support in samsung uart driver.

The default clock selection value 'def_clk_sel' specifies the default clock
to be used as the source clock for baud rate generator in case the platform
code does not specify the same.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

With clkdev based clock lookup added to samsung serial driver, the use
of 'struct s3c24xx_uart_clksrc' to supply clock names in platform
data is removed from all the Samsung platform code.

Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Ramax Lo <ramaxlo@gmail.com>
Cc: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Instead of using clock names supplied in platform data, use a generic
clock name 'clk_uart_baud' to look up clocks. The platform code should
register clocks with the name 'clk_uart_baud' which can be used by the
baud rate generator. The clock lookup and selection of the best clock
as baud rate clock is reworked.

Platform code can specify the clocks that can be used as source for the
baud clock (as supported previously by passing names of clocks). A new
member is added to the platform data 'clk_sel' which holds a bit-field
value with each bit representing a baud source clock. If a bit at any
bit position is set, that clock is looked up to participate in the
selection of the baud clock source.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

s3c2440 uses fclk/n (fclk divided by n) clock as one of the possible clocks used
to generate the baud rate clock. The divider 'n' in this case can be logically
represented outside of the uart controller.

This patch creates a new clock by name "fclk_n" for s3c2440 based platforms to
represent the fclk/n clock in the platform code. This clock provides a get_rate
callback that checks the UCON0/1/2 registers to determine the clock rate. The
samsung uart driver would receive the "fclk_n" clock name as one of the possible
baud rate clock options and the driver need not determine clock rate of fclk/n.

Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Add a pointer to the location of the platform data in the driver's private
data. When instantiated using device tree, pdev->dev->platform_data does not
necessarily point to a valid instance of platform data. The platform data
pointer in the driver's private data could be set to pdev->dev->platform_data
or platform data instance created from device tree.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

As gpio chips get registered, a device tree node which represents the
gpio chip is searched and attached to it. A translate function is also
provided to convert the gpio specifier into actual platform settings
for pin function selection, pull up/down and driver strength settings.
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
[kgene.kim@samsung.com: fixed build error]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Enable conversion of device tree interrupt specifier to linux
virq domain for GIC controller.
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The timer irqs statically mapped from linux irq numbers 11 to 15 are
moved to the end of the statically mapped linux irq space. The GIC PPI
and SPI interrupts are relocated to start from 16 and 32 of the linux
irq space. This is a required to add device tree support for GIC and
Interrupt combiner for EXYNOS4.

A new macro 'IRQ_TIMER_BASE' specifies a platform specific base of the
linux virq number for the timer interrupts. For exynos4, this base is
set to end of the linux virq space.  For the other S5P platforms, the
existing base '11' is retained.
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>