Move documentation into this century, even if this device hasn't
been available for some time.
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The MTU values in the documentation do not match the source.
The source has frame limit of IXGBE_MAX_JUMBO_FRAME_SIZE (9728)
which is MTU of 9710 because of the accounting for Ethernet header
and CRC.

Also, don't refer to the obsolete ifconfig command.
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

ifconfig command is obsolete, best to remove all references so that
new users learn ip.
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2015-04-09

We've had enough new patches during the past week (especially from
Marcel) that it'd be good to still get these queued for 4.1.

The majority of the changes are from Marcel with lots of cleanup &
refactoring patches for the HCI UART driver. Marcel also split out some
Broadcom & Intel vendor specific functionality into two new btintel &
btbcm modules.

In addition to the HCI driver changes there's the completion of our
local OOB data interface for pairing, added support for requesting
remote LE features when connecting, as well as a couple of minor fixes
for mac802154.

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Lookup key for tcp_md5_do_lookup() has to be taken
from addr_sk, not sk (which can be the listener)

Fixes: fd3a154a ("tcp: md5: get rid of tcp_v[46]_reqsk_md5_lookup()")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Tom Lendacky says:

====================
amd-xgbe: AMD XGBE driver updates 2015-04-09

The following series of patches includes functional updates and changes
to the driver.

- Allow ethtool rx-frames coalescing to be changed while the device is up
- Consolidate initialization routine into the init function
- Add support for the TX watchdog timeout

This patch series is based on net-next.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support to be able to detect a hung Tx task by adding the netdev
ndo_tx_timeout function callback. Do not set the watchdog_timeo value
so as to use the system default time (currently 5 seconds).
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently a call to configure the Rx mode (promiscuous mode, all
multicast mode, etc.) is made in xgbe_start separate from the xgbe_init
function. This call to set the Rx mode should be part of the xgbe_init
function so that calls to the init function don't have to be preceded
with calls to configure the Rx mode.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the device must be down in order to update the rx-frames
coalescing setting because the interrupt indicator is set in the
descriptor data during initialization. Allow this setting to be changed
while the device is up by moving the interrupt decision into the
descriptor reset function and base the decision off of the supplied
descriptor index value.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When an FDB entry is added or deleted the information about VLAN
is not passed to listening applications like 'bridge monitor fdb'.
With this patch VLAN ID is passed if it was set in the original
netlink message.

Also remove an unused bdev variable.
Signed-off-by: NHubert Sokolowski <hubert.sokolowski@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for your net-next tree.
They are:

* nf_tables set timeout infrastructure from Patrick Mchardy.

1) Add support for set timeout support.

2) Add support for set element timeouts using the new set extension
   infrastructure.

4) Add garbage collection helper functions to get rid of stale elements.
   Elements are accumulated in a batch that are asynchronously released
   via RCU when the batch is full.

5) Add garbage collection synchronization helpers. This introduces a new
   element busy bit to address concurrent access from the netlink API and the
   garbage collector.

5) Add timeout support for the nft_hash set implementation. The garbage
   collector peridically checks for stale elements from the workqueue.

* iptables/nftables cgroup fixes:

6) Ignore non full-socket objects from the input path, otherwise cgroup
   match may crash, from Daniel Borkmann.

7) Fix cgroup in nf_tables.

8) Save some cycles from xt_socket by skipping packet header parsing when
   skb->sk is already set because of early demux. Also from Daniel.

* br_netfilter updates from Florian Westphal.

9) Save frag_max_size and restore it from the forward path too.

10) Use a per-cpu area to restore the original source MAC address when traffic
    is DNAT'ed.

11) Add helper functions to access physical devices.

12) Use these new physdev helper function from xt_physdev.

13) Add another nf_bridge_info_get() helper function to fetch the br_netfilter
    state information.

14) Annotate original layer 2 protocol number in nf_bridge info, instead of
    using kludgy flags.

15) Also annotate the pkttype mangling when the packet travels back and forth
    from the IP to the bridge layer, instead of using a flag.

* More nf_tables set enhancement from Patrick:

16) Fix possible usage of set variant that doesn't support timeouts.

17) Avoid spurious "set is full" errors from Netlink API when there are pending
    stale elements scheduled to be released.

18) Restrict loop checks to set maps.

19) Add support for dynamic set updates from the packet path.

20) Add support to store optional user data (eg. comments) per set element.

BTW, I have also pulled net-next into nf-next to anticipate the conflict
resolution between your okfn() signature changes and Florian's br_netfilter
updates.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-next-for-davem-2015-04-09' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
Major changes:

iwlwifi:

* some more work on LAR
* fixes for UMAC scan
* more work on debugging framework
* more work for 8000 devices
* cleanups and small bugfixes
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2015-04-09

1) Prohibit the use/abuse of the xfrm netlink interface on
   32/64 bit compatibility tasks. We need a full compat
   layer before we can allow this. From Fan Du.

Please pull or let me know if there are problems.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Alexander Duyck says:

====================
Replace wmb()/rmb() with dma_wmb()/dma_rmb() where appropriate, round 2

More cleanup of drivers in order to start making use of dma_rmb and dma_wmb
calls.  This is another pass of what I would consider to be low hanging
fruit.  There may be other opportunities to make use of the barriers in the
Mellanox and Chelsio drivers but I didn't want to risk meddling with code I
was not completely familiar with so I am leaving that for future work.

I have revisited the Mellanox driver changes.  This time around I went only
for the sections with a clearly defined pattern.  For dma_wmb I used it
between accesses of the descriptor bits followed by owner or size.  For
dma_rmb I used it to replace rmb following a read of the ownership bit in
the descriptor.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Reduce the CPU overhead for transmit and receive by using lightweight dma_
barriers instead of full barriers where they are applicable.

Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com>
Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update i40e and i40evf to use dma_rmb.  This should improve performance by
decreasing the barrier overhead on strong ordered architectures.

Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com>
Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch should help to improve the performance of the mlx4 and mlx5 on a
number of architectures.  For example, on x86 the dma_wmb/rmb equates out
to a barrer() call as the architecture is already strong ordered, and on
PowerPC the call works out to a lwsync which is significantly less expensive
than the sync call that was being used for wmb.

I placed the new barriers between any spots that seemed to be trying to
order memory/memory reads or writes, if there are any spots that involved
MMIO I left the existing wmb in place as the new barriers cannot order
transactions between coherent and non-coherent memories.

v2: Reduced the replacments to just the spots where I could clearly
    identify the usage pattern.

Cc: Amir Vadai <amirv@mellanox.com>
Cc: Ido Shamay <idos@mellanox.com>
Cc: Eli Cohen <eli@mellanox.com>
Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update the Chelsio Ethernet drivers to use the dma_rmb/wmb calls instead of
the full barriers in order to improve performance.

Cc: Santosh Raspatur <santosh@chelsio.com>
Cc: Hariprasad S <hariprasad@chelsio.com>
Cc: Casey Leedom <leedom@chelsio.com>
Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Netlink attribute for the power is s8. But for the driver level
operations we are collection power level value into integer.
It has to be change to s8 from int.
Signed-off-by: NVarka Bhadram <varkab@cdac.in>
Acked-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The Intel vendors events indicating firmware loading result and the
bootup of the operational firmware are currently hardcoded byte
comparisons. So intead of doing that, provide proper data structures
and actually use them.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

Signed-off-by: NVarka Bhadram <varkab@cdac.in>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

When establishing a Bluetooth LE connection, read the remote used
features mask to determine which features are supported. This was
not really needed with Bluetooth 4.0, but since Bluetooth 4.1 and
also 4.2 have introduced new optional features, this becomes more
important.

This works the same as with BR/EDR where the connection enters the
BT_CONFIG stage and hci_connect_cfm call is delayed until the remote
features have been retrieved. Only after successfully receiving the
remote features, the connection enters the BT_CONNECTED state.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

We need to clean up vxlan despite vxlan_igmp_leave() fails.

This fixes the following kernel warning:

 WARNING: CPU: 0 PID: 6 at lib/debugobjects.c:263 debug_print_object+0x7c/0x8d()
 ODEBUG: free active (active state 0) object type: timer_list hint: vxlan_cleanup+0x0/0xd0
 CPU: 0 PID: 6 Comm: kworker/u8:0 Not tainted 4.0.0-rc7+ #953
 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
 Workqueue: netns cleanup_net
  0000000000000009 ffff88011955f948 ffffffff81a25f5a 00000000253f253e
  ffff88011955f998 ffff88011955f988 ffffffff8107608e 0000000000000000
  ffffffff814deba2 ffff8800d4e94000 ffffffff82254c30 ffffffff81fbe455
 Call Trace:
  [<ffffffff81a25f5a>] dump_stack+0x4c/0x65
  [<ffffffff8107608e>] warn_slowpath_common+0x9c/0xb6
  [<ffffffff814deba2>] ? debug_print_object+0x7c/0x8d
  [<ffffffff81076116>] warn_slowpath_fmt+0x46/0x48
  [<ffffffff814deba2>] debug_print_object+0x7c/0x8d
  [<ffffffff81666bf1>] ? vxlan_fdb_destroy+0x5b/0x5b
  [<ffffffff814dee02>] __debug_check_no_obj_freed+0xc3/0x15f
  [<ffffffff814df728>] debug_check_no_obj_freed+0x12/0x16
  [<ffffffff8117ae4e>] slab_free_hook+0x64/0x6c
  [<ffffffff8114deaa>] ? kvfree+0x31/0x33
  [<ffffffff8117dc66>] kfree+0x101/0x1ac
  [<ffffffff8114deaa>] kvfree+0x31/0x33
  [<ffffffff817d4137>] netdev_freemem+0x18/0x1a
  [<ffffffff817e8b52>] netdev_release+0x2e/0x32
  [<ffffffff815b4163>] device_release+0x5a/0x92
  [<ffffffff814bd4dd>] kobject_cleanup+0x49/0x5e
  [<ffffffff814bd3ff>] kobject_put+0x45/0x49
  [<ffffffff817d3fc1>] netdev_run_todo+0x26f/0x283
  [<ffffffff817d4873>] ? rollback_registered_many+0x20f/0x23b
  [<ffffffff817e0c80>] rtnl_unlock+0xe/0x10
  [<ffffffff817d4af0>] default_device_exit_batch+0x12a/0x139
  [<ffffffff810aadfa>] ? wait_woken+0x8f/0x8f
  [<ffffffff817c8e14>] ops_exit_list+0x2b/0x57
  [<ffffffff817c9b21>] cleanup_net+0x154/0x1e7
  [<ffffffff8108b05d>] process_one_work+0x255/0x4ad
  [<ffffffff8108af69>] ? process_one_work+0x161/0x4ad
  [<ffffffff8108b4b1>] worker_thread+0x1cd/0x2ab
  [<ffffffff8108b2e4>] ? process_scheduled_works+0x2f/0x2f
  [<ffffffff81090686>] kthread+0xd4/0xdc
  [<ffffffff8109eca3>] ? local_clock+0x19/0x22
  [<ffffffff810905b2>] ? __kthread_parkme+0x83/0x83
  [<ffffffff81a31c48>] ret_from_fork+0x58/0x90
  [<ffffffff810905b2>] ? __kthread_parkme+0x83/0x83

For the long-term, we should handle NETDEV_{UP,DOWN} event
from the lower device of a tunnel device.

Fixes: 56ef9c90 ("vxlan: Move socket initialization to within rtnl scope")
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

FastOpen requests are not like other regular request sockets.

They do not yet use rsk_timer : tcp_fastopen_queue_check()
simply manually removes one expired request from fastopenq->rskq_rst
list.

Therefore, tcp_check_req() must not call mod_timer_pending(),
otherwise we crash because rsk_timer was not initialized.

Fixes: fa76ce73 ("inet: get rid of central tcp/dccp listener timer")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Samuel Ortiz says:

====================
NFC: 4.1 pull request

This is the NFC pull request for 4.1.

This is a shorter one than usual, as the Intel Field Peak NFC
driver could not make it in time.

We have:

- A new driver for NXP NCI based chipsets, like e.g. the NPC100 or
  the PN7150. It currently only supports an i2c physical layer, but
  could easily be extended to work on top of e.g. SPI.
  This driver also includes support for user space triggered firmware
  updates.

- A few minor st21nfc[ab] fixes, cleanups, and comments improvements.

- A pn533 error return fix.

- A few NFC related logs formatting cleanups.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commits:

d92916f7 ("sfc: Own header for nic-specific sriov functions,")
25672dba ("sfc: Enable VF's via a write to the sysfs file
 sriov_numvfs")

As they break the build with SRIOV disabled and there is no
easy way to fix it the way things are arranged.
Reported-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

More recent GCC warns about two kinds of switch statement uses:

1) Switching on an enumeration, but not having an explicit case
   statement for all members of the enumeration.  To show the
   compiler this is intentional, we simply add a default case
   with nothing more than a break statement.

2) Switching on a boolean value.  I think this warning is dumb
   but nevertheless you get it wholesale with -Wswitch.

This patch cures all such warnings in netfilter.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NPablo Neira Ayuso <pablo@netfilter.org>

Nicolas Dichtel says:

====================
selinux: add some missing nlmsg commands

It's not a critical issue, thus the patches are based on net-next.

Patches are splitted because the 'Fixes' tag is not the same for all
commands.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These commands are missing.

Fixes: 28d8909b ("[XFRM]: Export SAD info.")
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This command is missing.

Fixes: ecfd6b18 ("[XFRM]: Export SPD info")
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This new command is missing.

Fixes: 880a6fab ("xfrm: configure policy hash table thresholds by netlink")
Reported-by: NChristophe Gouault <christophe.gouault@6wind.com>
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This new command is missing.

Fixes: 9a963454 ("netns: notify netns id events")
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These new commands are missing.

Fixes: 0c7aecd4 ("netns: add rtnl cmd to add and get peer netns ids")
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The DWMAC block on certain SoCs (such as IMG Pistachio) have a second
clock which must be enabled in order to access the peripheral's
register interface, so add support for requesting and enabling an
optional "pclk".
Signed-off-by: NAndrew Bresticker <abrestic@chromium.org>
Cc: James Hartley <james.hartley@imgtec.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 79b16aad
("udp_tunnel: Pass UDP socket down through udp_tunnel{, 6}_xmit_skb()")
introduce 'sk' but we already have one inner 'sk'.

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Resolve conflicts between 5888b93b ("Merge branch 'nf-hook-compress'") and
Florian Westphal br_netfilter works.

Conflicts:
        net/bridge/br_netfilter.c
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Vitaly Kuznetsov says:

====================
hv_netvsc: linearize SKBs bigger than MAX_PAGE_BUFFER_COUNT-2 pages

This patch series fixes the same issue which was fixed in Xen with commit
97a6d1bb ("xen-netfront: Fix handling packets on
compound pages with skb_linearize").

It is relatively easy to create a packet which is small in size but occupies
more than 30 (MAX_PAGE_BUFFER_COUNT-2) pages. Here is a kernel-mode reproducer
which tries sending a packet with only 34 bytes of payload (but on 34 pages)
and fails:

static int __init sendfb_init(void)
{
	struct socket *sock;
	int i, ret;
	struct sockaddr_in in4_addr = { 0 };
	struct page *pages[17];
	unsigned long flags;

	ret = sock_create_kern(AF_INET, SOCK_STREAM, IPPROTO_TCP, &sock);
	if (ret) {
		pr_err("failed to create socket: %d!\n", ret);
		return ret;
	}

	in4_addr.sin_family = AF_INET;
	/* www.google.com, 74.125.133.99 */
	in4_addr.sin_addr.s_addr = cpu_to_be32(0x4a7d8563);
	in4_addr.sin_port = cpu_to_be16(80);

	ret = sock->ops->connect(sock, (struct sockaddr *)&in4_addr, sizeof(in4_addr), 0);
	if (ret) {
		pr_err("failed to connect: %d!\n", ret);
		return ret;
	}

	/* We can send up to 17 frags */
	flags = MSG_MORE;
	for (i = 0; i < 17; i++) {
		if (i == 16)
			flags = MSG_EOR;
		pages[i] = alloc_pages(GFP_KERNEL | __GFP_COMP, 1);
		if (!pages[i]) {
			pr_err("out of memory!");
			goto free_pages;
		}
		sock->ops->sendpage(sock, pages[i], PAGE_SIZE -1, 2, flags);
	}

free_pages:
	for (; i > 0; i--)
		__free_pages(pages[i - 1], 1);

	printk("sendfb_init: test done\n");
        return -1;
}

module_init(sendfb_init);

MODULE_LICENSE("GPL");

A try to load such module results in multiple
'kernel: hv_netvsc vmbus_15 eth0: Packet too big: 100' messages as all retries
fail as well. It should also be possible to trigger the issue from userspace, I
expect e.g. NFS under heavy load to get stuck sometimes.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In netvsc_start_xmit() we can handle packets which are scattered around not
more than MAX_PAGE_BUFFER_COUNT-2 pages. It is, however, easy to create a
packet which is not big in size but occupies more pages (e.g. if it uses frags
on compound pages boundaries). When we drop such packet it cases sender to try
resending it but in most cases it will try resending the same packet which will
also get dropped, this will cause the particular connection to stick. To solve
the issue we can try linearizing skb.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

... which validly uses dev_kfree_skb_any() instead of dev_kfree_skb().

Setting ret to -EFAULT and -ENOMEM have no real meaning here (we need to set
it to anything but -EAGAIN) as we drop the packet and return NETDEV_TX_OK
anyway.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Shradha Shah says:

====================
sfc: Nic specific sriov functions, netdev_ops and sriov_configure

First two patches among the series of patches to support SRIOV on EF10.

First patch declares nic specific sriov functions in nic specific headers,
creates only one instance of the netdev_ops, removes sriov functionality
from Falcon code.

Second patch adds support for sriov_configure.

The Virtual Functions can be enabled but they do not bind to the SFC
driver just yet.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>