Instead of managing input-jack stuff separately, call all stuff inside
the kctl-jack creation, deletion and report.  The caller no longer needs
to care about input-jack.

The better integration between input-jack and kctl-jack should be done
in the upper layer in near future, but for now, it's implemented locally
for more tests.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The multiple headphone pins are usually handled as copied from the same
source, not as individual channels like front and surround.  Thus it'd
be more correct to avoid the channel suffix for "Headphone" pin labels
in snd_hda_get_pin_label() but give an index number instead.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Reported-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The function now gives more unique names for the output pins by adding
some prefix and suffix for the location and the channels.  Otherwise, it
can pass the index number.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This is needed newly since 3.2...
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Otherwise the jack kctls will report invalid values until the jack
is re-plugged.
Reported-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The type field was lost during the transition.  Restored.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

At probing time, the elements that aren't assigned to kctl or jack may
be called.  Need proper NULL-checks.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These two functions are being used by the codec-idt and codec-hdmi
modules, so they need to be exported properly.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We can use the very same table in hda_jack.c for managing the list for
input-jack elements, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now move the helper function for creating and reporting the jack-detection
to the common place.  The driver that needs this functionality should
select CONFIG_SND_KCTL_JACK kconfig.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Manage the tags assigned for unsolicited events dynamically together
with the jack-detection routines.  Basically this is almost same as what
we've done in patch_sigmatel.c.  Assign the new tag number for each new
unsol event, associate with the given NID and the action type, etc.

With this change, now all pins looked over in snd_hda_jack_add_kctls()
are actually enabled for detection now even if the pins aren't used for
jack-retasking by the driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Create kcontrols for pin jack-detections, which work similarly like
jack-input layer.  Each control will notify when the jack is plugged or
unplugged, and also user can read the value at any time via the normal
control API.

The control elements are created with iface=CARD, so that they won't
appear in the mixer apps.

So far, only the pins that enabled the jack-detection are registered.
For covering all pins, the transition of the common unsol-tag handling
would be needed.  Stay tuned.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Introduce a table containing the pins and their jack-detection states
for avoiding the unnecessary verbs to check the pin status at each time.

When the unsol event is enabled via snd_hda_jack_detect_enable(), it
automatically adds the given NID to the table.  Then the driver supposes
that the codec driver will set the dirty flag appropariately when an
unsolicited event is invoked for that pin.

The behavior for reading other pins that aren't registered in the table
doesn't change.  Only the pins assigned to the table are cached, so far.

In near futre, this table can be extended to use the central place for
the unsolicited events of all pins, etc, and eventually include the
jack-detect kcontrols that replace the current input-jack stuff.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Create a new helper function snd_hda_get_pin_label() for getting a label
string for both input and output pins.  hda_get_input_pin_label() is
obsoleted by this function, and the callers are replaced appropriately
now by this patch.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some stuff was moved from kernel.org to other places.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It looks more natural and saves two lines of code.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The Intel HDMI chips (ironlake at least) are found to have ~250ms delay
between the ELD_Valid=1 hotplug event is send and the ELD buffer becomes
actually readable. During the time the ELD buffer is mysteriously all 0.

Fix it by scheduling a delayed work to re-read ELD buffer after 300ms.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

memset(eld) clears eld->proc_entry which will leak the struct
snd_info_entry when unloading module.

Fix it by
- memset only the fields before eld->eld_buffer
- set eld->eld_valid to true _after_ all eld fields have been filled

Cc: <stable@kernel.org>
Cc: Pierre-louis Bossart <pierre-louis.bossart@intel.com>
Acked-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ALC880 model=lg-lw works fine with the auto-parser as is.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Translate ALC880 medion-rim static configs to the auto-parser with the
additional GPIO2 verb and COEF setup.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The ALC882 macpro and imac24 static configs can be transferred to the
auto-parser with the additional GPIO setup.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In the commit [c3e837bb: ALSA: hda/realtek - Rewrite ALC882 acer-aspire-*
models with the auto-parser], the check of the model option got removed
mistakenly.  Re-added the board_config check again.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Remove unused variables.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the pin or the DAC doesn't support the stereo, create a mono
control instead of creating a stereo control blindly.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Having just one semicolon after a break statement is enough.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Clean up and fix pwr_nids for 92HD71 / 73 / 83 family codecs; remove
pwr_mapping which was incorrect.

The original pwr_nids support of 92HD83xxx was incorrect and never
actually worked before.  Now we should have things working correctly
without having to hack by DID anymore.

It is also not necessary to explicitly turn on all the pins near the
beginning of patch_stac92hd83xxx() now, the pins will go though
initialization properly.

Tested on 92HD66 / 71 / 73 / 75 / 83 / 89 / 91 demo boards.
Signed-off-by: NCharles Chin <Charles.Chin@idt.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use kmemdup rather than duplicating its implementation

The semantic patch that makes this change is available
in scripts/coccinelle/api/memdup.cocci.
Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now we can move the big acer-aspire-* static quirks to the auto-paresr
with some additional pin-configs and verbs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

So far the driver creates the multi-io jacks only when a single output
jack, i.e. no multiple speakers are assigned.  This patch adds the
similar multi-io detection even with multiple speakers are assigned
primarily, so that 5.1-speakers + HP/mic/LI combination can work.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We disabled the check of NO_PRESENCE bit of the default pin-config
in commit f4419172 temporarily.  One problem was that the first
implementation was wrong -- the bit after the shift must be checked.
However, this would still give many regressions on machines with broken
BIOS.  They set this bit wrongly even on active pins.

A workaround is to check whether all pins contain this bit.  As far as
I've checked, broken BIOSen set this bit on all pins, no matter whether
active or not.  In such a case, the driver should ignore this bit check.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When freeing the vmaster master element, we should release slave-links
properly, not only assumig that slaves will be freed soon later.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When a virtual mater control is created, the driver looks for slave
elements from the assigned card instance.  But this may include the
elements of other codecs when multiple codecs are on the same HD-audio
bus.  This works at the first time, but it'll give Oops when it's once
freed and re-created via reconfig sysfs.

This patch changes the element-look-up strategy to limit only to the
mixer elements of the same codec.
Reported-by: NDavid Henningsson <david.henningsson@canonical.com>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Detection code improved by PCI SSID usage. VM optimization
now enabled only for known devcices (skip host devices forwarded
to VM by VT-d or same kind of technology).
For debug/troubleshooting purposes optimization can be
forced (on/off) by module parameter: "inside_vm" (boolean).

Known devices (PCI SSID):
1af4:1100: Reserved for KVM devices. Note this is not yet
           implemented for KVM's ICH/AC'97 emulation.
1ab8:xxxx: Parallels ICH/AC'97 emulated sound.

[ fixed a minor coding-style issue by tiwai]
Signed-off-by: NKonstantin Ozerkov <kozerkov@parallels.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This is refactoring patch: preparation for add improved detection code.
Now all detection code placed in one place.
Signed-off-by: NKonstantin Ozerkov <kozerkov@parallels.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now we're touching the desktop static configs for ALC88x codecs.
These are mostly OK with the auto-parser, but some models need careful
handling; ALC889 intel mobo requires the COEF setup, and W2JC needs
GPIO1 and COEF.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

All ALC882 targa-* models can be replaced with the auto-parser just
with the additional GPIO3 setup.  And it's generically applied to all
MSI boards unless other quirks are present.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>