Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 08 7月, 2016 11 次提交
    • J
      Btrfs: fix release reserved extents trace points · 31bada7c
      由 Josef Bacik 提交于 
      We were doing trace_btrfs_release_reserved_extent() in pin_down_extent which
isn't quite right because we will go through and free that extent later when we
unpin, so it messes up apps that are accounting for the reservation space.  We
were also unconditionally doing it in __btrfs_free_reserved_extent(), when we
only actually free the reservation instead of pinning the extent.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
      31bada7c
    • J
      Btrfs: add tracepoints for flush events · f376df2b
      由 Josef Bacik 提交于 
      We want to track when we're triggering flushing from our reservation code and
what flushing is being done when we start flushing.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
      f376df2b
    • J
      Btrfs: fix delalloc reservation amount tracepoint · f485c9ee
      由 Josef Bacik 提交于 
      We can sometimes drop the reservation we had for our inode, so we need to remove
that amount from to_reserve so that our tracepoint reports a valid amount of
space.
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
      f485c9ee
    • J
      Btrfs: trace pinned extents · c51e7bb1
      由 Josef Bacik 提交于 
      Pinned extents are an important metric to keep track of for enospc.
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
      c51e7bb1
    • J
      Btrfs: introduce ticketed enospc infrastructure · 957780eb
      由 Josef Bacik 提交于 
      Our enospc flushing sucks.  It is born from a time where we were early
enospc'ing constantly because multiple threads would race in for the same
reservation and randomly starve other ones out.  So I came up with this solution
to block any other reservations from happening while one guy tried to flush
stuff to satisfy his reservation.  This gives us pretty good correctness, but
completely crap latency.

The solution I've come up with is ticketed reservations.  Basically we try to
make our reservation, and if we can't we put a ticket on a list in order and
kick off an async flusher thread.  This async flusher thread does the same old
flushing we always did, just asynchronously.  As space is freed and added back
to the space_info it checks and sees if we have any tickets that need
satisfying, and adds space to the tickets and wakes up anything we've satisfied.

Once the flusher thread stops making progress it wakes up all the current
tickets and tells them to take a hike.

There is a priority list for things that can't flush, since the async flusher
could do anything we need to avoid deadlocks.  These guys get priority for
having their reservation made, and will still do manual flushing themselves in
case the async flusher isn't running.

This patch gives us significantly better latencies.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
      957780eb
    • J
      Btrfs: add tracepoint for adding block groups · c83f8eff
      由 Josef Bacik 提交于 
      I'm writing a tool to visualize the enospc system inside btrfs, I need this
tracepoint in order to keep track of the block groups in the system.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
      c83f8eff
    • J
      Btrfs: warn_on for unaccounted spaces · d555b6c3
      由 Josef Bacik 提交于 
      These were hidden behind enospc_debug, which isn't helpful as they indicate
actual bugs, unlike the rest of the enospc_debug stuff which is really debug
information.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
      d555b6c3
    • J
      Btrfs: change delayed reservation fallback behavior · c48f49d6
      由 Josef Bacik 提交于 
      We reserve space for the inode update when we first reserve space for writing to
a file.  However there are lots of ways that we can use this reservation and not
have it for subsequent ordered extents.  Previously we'd fall through and try to
reserve metadata bytes for this, then we'd just steal the full reservation from
the delalloc_block_rsv, and if that didn't have enough space we'd steal the full
reservation from the global reserve.  The problem with this is we can easily
just return ENOSPC and fallback to updating the inode item directly.  In the
worst case (assuming 4k nodesize) we'd steal 64kib from the global reserve if we
fall all the way through, however if we just fallback and update the inode
directly we'd only steal 4k * BTRFS_PATH_MAX in the worst case which is 32kib.

We would have also just added the extent item for the inode so we likely will
have already cow'ed down most of the way to the leaf containing the inode item,
so we are more often than not only need one or two nodesize's worth of
reservations.  Given the reservation for the extent itself is also a worst case
we will likely already have space to cover the inode update.

This change will make us behave better in the theoretical worst case, and much
better in the case that we don't have our reservation and cannot reserve more
metadata.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
      c48f49d6
    • J
      Btrfs: always reserve metadata for delalloc extents · 48c3d480
      由 Josef Bacik 提交于 
      There are a few races in the metadata reservation stuff.  First we add the bytes
to the block_rsv well after we've set the bit on the inode saying that we have
space for it and after we've reserved the bytes.  So use the normal
btrfs_block_rsv_add helper for this case.  Secondly we can flush delalloc
extents when we try to reserve space for our write, which means that we could
have used up the space for the inode and we wouldn't know because we only check
before the reservation.  So instead make sure we are always reserving space for
the inode update, and then if we don't need it release those bytes afterward.
Thanks,
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
      48c3d480
    • J
      Btrfs: fix callers of btrfs_block_rsv_migrate · 25d609f8
      由 Josef Bacik 提交于 
      So btrfs_block_rsv_migrate just unconditionally calls block_rsv_migrate_bytes.
Not only this but it unconditionally changes the size of the block_rsv.  This
isn't a bug strictly speaking, but it makes truncate block rsv's look funny
because every time we migrate bytes over its size grows, even though we only
want it to be a specific size.  So collapse this into one function that takes an
update_size argument and make truncate and evict not update the size for
consistency sake.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
      25d609f8
    • J
      Btrfs: add bytes_readonly to the spaceinfo at once · e40edf2d
      由 Josef Bacik 提交于 
      For some reason we're adding bytes_readonly to the space info after we update
the space info with the block group info.  This creates a tiny race where we
could over-reserve space because we haven't yet taken out the bytes_readonly
bit.  Since we already know this information at the time we call
update_space_info, just pass it along so it can be updated all at once.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
      e40edf2d
  3. 03 7月, 2016 1 次提交
  5. 01 7月, 2016 4 次提交
  7. 30 6月, 2016 1 次提交
  9. 29 6月, 2016 3 次提交
    • M
      ovl: get_write_access() in truncate · 03bea604
      由 Miklos Szeredi 提交于 
      When truncating a file we should check write access on the underlying
inode.  And we should do so on the lower file as well (before copy-up) for
consistency.

Original patch and test case by Aihua Zhang.

 - - >o >o - - test.c - - >o >o - -
#include <stdio.h>
#include <errno.h>
#include <unistd.h>

int main(int argc, char *argv[])
{
	int ret;

	ret = truncate(argv[0], 4096);
	if (ret != -1) {
		fprintf(stderr, "truncate(argv[0]) should have failed\n");
		return 1;
	}
	if (errno != ETXTBSY) {
		perror("truncate(argv[0])");
		return 1;
	}

	return 0;
}
 - - >o >o - - >o >o - - >o >o - -
Reported-by: NAihua Zhang <zhangaihua1@huawei.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>
      03bea604
    • M
      ovl: fix dentry leak for default_permissions · a4859d75
      由 Miklos Szeredi 提交于 
      When using the 'default_permissions' mount option, ovl_permission() on
non-directories was missing a dput(alias), resulting in "BUG Dentry still
in use".
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Fixes: 8d3095f4 ("ovl: default permissions")
Cc: <stable@vger.kernel.org> # v4.5+
      a4859d75
    • T
      NFS: Fix another OPEN_DOWNGRADE bug · e547f262
      由 Trond Myklebust 提交于 
      Olga Kornievskaia reports that the following test fails to trigger
an OPEN_DOWNGRADE on the wire, and only triggers the final CLOSE.

	fd0 = open(foo, RDRW)   -- should be open on the wire for "both"
	fd1 = open(foo, RDONLY)  -- should be open on the wire for "read"
	close(fd0) -- should trigger an open_downgrade
	read(fd1)
	close(fd1)

The issue is that we're missing a check for whether or not the current
state transitioned from an O_RDWR state as opposed to having transitioned
from a combination of O_RDONLY and O_WRONLY.
Reported-by: NOlga Kornievskaia <aglo@umich.edu>
Fixes: cd9288ff ("NFSv4: Fix another bug in the close/open_downgrade code")
Cc: stable@vger.kernel.org # 2.6.33+
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
      e547f262
  11. 28 6月, 2016 1 次提交
    • E
      dax: fix offset overflow in dax_io · 02395435
      由 Eric Sandeen 提交于 
      This isn't functionally apparent for some reason, but
when we test io at extreme offsets at the end of the loff_t
rang, such as in fstests xfs/071, the calculation of
"max" in dax_io() can be wrong due to pos + size overflowing.

For example,

# xfs_io -c "pwrite 9223372036854771712 512" /mnt/test/file

enters dax_io with:

start 0x7ffffffffffff000
end   0x7ffffffffffff200

and the rounded up "size" variable is 0x1000.  This yields:

pos + size 0x8000000000000000 (overflows loff_t)
       end 0x7ffffffffffff200

Due to the overflow, the min() function picks the wrong
value for the "max" variable, and when we send (max - pos)
into i.e. copy_from_iter_pmem() it is also the wrong value.

This somehow(tm) gets magically absorbed without incident,
probably because iter->count is correct.  But it seems best
to fix it up properly by comparing the two values as
unsigned.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
      02395435
  13. 27 6月, 2016 1 次提交
    • A
      make nfs_atomic_open() call d_drop() on all ->open_context() errors. · d20cb71d
      由 Al Viro 提交于 
      In "NFSv4: Move dentry instantiation into the NFSv4-specific atomic open code"
unconditional d_drop() after the ->open_context() had been removed.  It had
been correct for success cases (there ->open_context() itself had been doing
dcache manipulations), but not for error ones.  Only one of those (ENOENT)
got a compensatory d_drop() added in that commit, but in fact it should've
been done for all errors.  As it is, the case of O_CREAT non-exclusive open
on a hashed negative dentry racing with e.g. symlink creation from another
client ended up with ->open_context() getting an error and proceeding to
call nfs_lookup().  On a hashed dentry, which would've instantly triggered
BUG_ON() in d_materialise_unique() (or, these days, its equivalent in
d_splice_alias()).

Cc: stable@vger.kernel.org # v3.10+
Tested-by: NOleg Drokin <green@linuxhacker.ru>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
      d20cb71d
  15. 25 6月, 2016 18 次提交