- 15 5月, 2016 1 次提交
-
-
由 Linus Torvalds 提交于
The slab name ends up being visible in the directory structure under /sys, and even if you don't have access rights to the file you can see the filenames. Just use a 64-bit counter instead of the pointer to the 'net' structure to generate a unique name. This code will go away in 4.7 when the conntrack code moves to a single kmemcache, but this is the backportable simple solution to avoiding leaking kernel pointers to user space. Fixes: 5b3501fa ("netfilter: nf_conntrack: per netns nf_conntrack_cachep") Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 5月, 2016 6 次提交
-
-
由 David S. Miller 提交于
Iyappan Subramanian says: ==================== drivers: net: xgene: Bug fixes This patch set addresses the following bug fixes that were found during testing. 1. IPv4 forward test crash - drivers: net: xgene: fix IPv4 forward crash 2. Sharing of irqs - drivers: net: xgene: fix sharing of irqs 3. Ununiform latency across queues - drivers: net: xgene: fix ununiform latency across queues 4. Fix statistics counters race condition - drivers: net: xgene: fix statistics counters race condition 5. Correcting register offset and field lengths - drivers: net: xgene: fix register offset v2: Address review comments from v1 - Defer TSO fix, and reposting all other patches from v1 v1: - Initial version ==================== Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Iyappan Subramanian 提交于
This patch fixes SG_RX_DV_GATE_REG_0_ADDR register offset and ring state field lengths. Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Tested-by: NToan Le <toanle@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Iyappan Subramanian 提交于
This patch fixes the race condition on updating the statistics counters by moving the counters to the ring structure. Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Tested-by: NToan Le <toanle@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Iyappan Subramanian 提交于
This patch addresses ununiform latency across queues by adding more queues to match with, upto number of CPU cores. Also, number of interrupts are increased and the channel numbers are reordered. Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Tested-by: NToan Le <toanle@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Iyappan Subramanian 提交于
Since hardware doesn't allow sharing of interrupts, this patch fixes the same by removing IRQF_SHARED flag. Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Tested-by: NToan Le <toanle@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Iyappan Subramanian 提交于
This patch fixes the crash observed during IPv4 forward test by setting the drop field in the dbptr. Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Tested-by: NToan Le <toanle@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 5月, 2016 2 次提交
-
-
由 Paul Durrant 提交于
Patch 562abd39 "xen-netback: support multiple extra info fragments passed from frontend" contained a mistake which can result in an in- correct number of responses being generated when handling errors encountered when processing packets containing extra info fragments. This patch fixes the problem. Signed-off-by: NPaul Durrant <paul.durrant@citrix.com> Reported-by: NJan Beulich <JBeulich@suse.com> Cc: Wei Liu <wei.liu2@citrix.com> Acked-by: NWei Liu <wei.liu2@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
I tried to fix this before, but my previous fix was incomplete and we can still get the same link error in randconfig builds because of the way that Kconfig treats the default y if MVNETA=y && MVNETA_BM_ENABLE line that does not actually trigger when MVNETA_BM_ENABLE=m, unlike I intended. Changing the line to use MVNETA_BM_ENABLE!=n however has the desired effect and hopefully makes all configurations work as expected. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Fixes: 019ded3a ("net: mvneta: bm: clarify dependencies") Acked-by: NGregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 5月, 2016 11 次提交
-
-
由 David S. Miller 提交于
Michael Chan says: ==================== bnxt_en: Add workaround to detect bad opaque in rx completion. 2-part workaround for this hardware bug. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add detection and recovery code when the hardware returned opaque value does not match the expected consumer index. Once the issue is detected, we skip the processing of all RX and LRO/GRO packets. These completion entries are discarded without sending the SKB to the stack and without producing new buffers. The function will be reset from a workqueue. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
There is a rare hardware bug that can cause a bad opaque value in the RX or TPA completion. When this happens, the hardware may have used the same buffer twice for 2 rx packets. In addition, the driver will also crash later using the bad opaque as the index into the ring. The rx opaque value is predictable and is always monotonically increasing. The workaround is to keep track of the expected next opaque value and compare it with the one returned by hardware during RX and TPA start completions. If they miscompare, we will not process any more RX and TPA completions and exit NAPI. We will then schedule a workqueue to reset the function. This patch adds the logic to keep track of the next rx consumer index. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
If qlcnic_fw_cmd_get_minidump_temp() fails then "fw_dump->tmpl_hdr" is NULL or possibly freed. It can lead to an oops later. Fixes: d01a6d3c ('qlcnic: Add support to enable capability to extend minidump for iSCSI') Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "This is a couple of small fixes: one is a potential uninitialised error variable in the alua code, potentially causing spurious failures and the other is a problem caused by the conversion of SCSI to hostwide tags which resulted in the qla1280 driver always failing in host initialisation" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: qla1280: Don't allocate 512kb of host tags scsi_dh_alua: uninitialized variable in alua_rtpg()
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: "Hopefully the last round of fixes this release, fingers crossed :) 1) Initialize static nf_conntrack_locks_all_lock properly, from Florian Westphal. 2) Need to cancel pending work when destroying IDLETIMER entries, from Liping Zhang. 3) Fix TX param usage when sending TSO over iwlwifi devices, from Emmanuel Grumbach. 4) NFACCT quota params not validated properly, from Phil Turnbull. 5) Resolve more glibc vs. kernel header conflicts, from Mikko Tapeli. 6) Missing IRQ free in ravb_close(), from Geert Uytterhoeven. 7) Fix infoleak in x25, from Kangjie Lu. 8) Similarly in thunderx driver, from Heinrich Schuchardt. 9) tc_ife.h uapi header not exported properly, from Jamal Hadi Salim. 10) Don't reenable PHY interreupts if device is in polling mode, from Shaohui Xie. 11) Packet scheduler actions late binding was not being handled properly at all, from Jamal Hadi Salim. 12) Fix binding of conntrack entries to helpers in openvswitch, from Joe Stringer" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits) gre: do not keep the GRE header around in collect medata mode openvswitch: Fix cached ct with helper. net sched: ife action fix late binding net sched: skbedit action fix late binding net sched: simple action fix late binding net sched: mirred action fix late binding net sched: ipt action fix late binding net sched: vlan action fix late binding net: phylib: fix interrupts re-enablement in phy_start tcp: refresh skb timestamp at retransmit time net: nps_enet: bug fix - handle lost tx interrupts net: nps_enet: Tx handler synchronization export tc ife uapi header net: thunderx: avoid exposing kernel stack net: fix a kernel infoleak in x25 module ravb: Add missing free_irq() call to ravb_close() uapi glibc compat: fix compile errors when glibc net/if.h included before linux/if.h netfilter: nfnetlink_acct: validate NFACCT_QUOTA parameter iwlwifi: mvm: don't override the rate with the AMSDU len netfilter: IDLETIMER: fix race condition when destroy the target ...
-
由 Jiri Benc 提交于
For ipgre interface in collect metadata mode, it doesn't make sense for the interface to be of ARPHRD_IPGRE type. The outer header of received packets is not needed, as all the information from it is present in metadata_dst. We already don't set ipgre_header_ops for collect metadata interfaces, which is the only consumer of mac_header pointing to the outer IP header. Just set the interface type to ARPHRD_NONE in collect metadata mode for ipgre (not gretap, that still correctly stays ARPHRD_ETHER) and reset mac_header. Fixes: a64b04d8 ("gre: do not assign header_ops in collect metadata mode") Fixes: 2e15ea39 ("ip_gre: Add support to collect tunnel metadata.") Signed-off-by: NJiri Benc <jbenc@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Stringer 提交于
When using conntrack helpers from OVS, a common configuration is to perform a lookup without specifying a helper, then go through a firewalling policy, only to decide to attach a helper afterwards. In this case, the initial lookup will cause a ct entry to be attached to the skb, then the later commit with helper should attach the helper and confirm the connection. However, the helper attachment has been missing. If the user has enabled automatic helper attachment, then this issue will be masked as it will be applied in init_conntrack(). It is also masked if the action is executed from ovs_packet_cmd_execute() as that will construct a fresh skb. This patch fixes the issue by making an explicit call to try to assign the helper if there is a discrepancy between the action's helper and the current skb->nfct. Fixes: cae3a262 ("openvswitch: Allow attaching helpers to ct action") Signed-off-by: NJoe Stringer <joe@ovn.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mathias Krause 提交于
The x86 exception table sorting was changed in commit 29934b0f ("x86/extable: use generic search and sort routines") to use the arch independent code in lib/extable.c. However, the patch was mangled somehow on its way into the kernel from the last version posted at [1]. The committed version kind of attempted to incorporate the changes of commit 548acf19 ("x86/mm: Expand the exception table logic to allow new handling options") as in _completely_ _ignoring_ the x86 specific 'handler' member of struct exception_table_entry. This effectively broke the sorting as entries will only partly be swapped now. Fortunately, the x86 Kconfig selects BUILDTIME_EXTABLE_SORT, so the exception table doesn't need to be sorted at runtime. However, in case that ever changes, we better not break the exception table sorting just because of that. [ Ard Biesheuvel points out that BUILDTIME_EXTABLE_SORT applies to the core image only, but we still rely on the sorting routines for modules in that case - Linus ] Fix this by providing a swap_ex_entry_fixup() macro that takes care of the 'handler' member. [1] https://lkml.org/lkml/2016/1/27/232Signed-off-by: NMathias Krause <minipli@googlemail.com> Fixes: 29934b0f ("x86/extable: use generic search and sort routines") Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi由 Linus Torvalds 提交于
Pull spi fixes from Mark Brown: "A bunch of small driver specific fixes that have come up, none of them remarkable in themselves. One fixes a regression introduced in the merge window and another two are targetted at stable" * tag 'spi-fix-v4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: pxa2xx: Do not detect number of enabled chip selects on Intel SPT spi: spi-ti-qspi: Handle truncated frames properly spi: spi-ti-qspi: Fix FLEN and WLEN settings if bits_per_word is overridden spi: omap2-mcspi: Undo broken fix for dma transfer of vmalloced buffer spi: spi-fsl-dspi: Fix cs_change handling in message transfer
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Paolo Bonzini: "Two small x86 patches, improving "make kvmconfig" and fixing an objtool warning for CONFIG_PROFILE_ALL_BRANCHES" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvmconfig: add more virtio drivers x86/kvm: Add stack frame dependency to fastop() inline asm
-
- 11 5月, 2016 17 次提交
-
-
由 David S. Miller 提交于
Jamal Hadi Salim says: ==================== Some actions were broken in allowing for late binding of actions. Late binding workflow is as follows: a) create an action and provide all necessary parameters for it Optionally provide an index or let the kernel give you one. Example: sudo tc actions add action police rate 1kbit burst 90k drop index 1 b) later on bind to the pre-created action from a filter definition by merely specifying the index. Example: sudo tc filter add dev lo parent ffff: protocol ip prio 8 \ u32 match ip src 127.0.0.8/32 flowid 1:8 action police index 1 ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jamal Hadi Salim 提交于
The process below was broken and is fixed with this patch. //add an ife action and give it an instance id of 1 sudo tc actions add action ife encode \ type 0xDEAD allow mark dst 02:15:15:15:15:15 index 1 //create a filter which binds to ife action id 1 sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\ match ip dst 17.0.0.1/32 flowid 1:11 action ife index 1 Message before fix was: RTNETLINK answers: Invalid argument We have an error talking to the kernel Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jamal Hadi Salim 提交于
The process below was broken and is fixed with this patch. //add a skbedit action and give it an instance id of 1 sudo tc actions add action skbedit mark 10 index 1 //create a filter which binds to skbedit action id 1 sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\ match ip dst 17.0.0.1/32 flowid 1:10 action skbedit index 1 Message before fix was: RTNETLINK answers: Invalid argument We have an error talking to the kernel Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jamal Hadi Salim 提交于
The process below was broken and is fixed with this patch. //add a simple action and give it an instance id of 1 sudo tc actions add action simple sdata "foobar" index 1 //create a filter which binds to simple action id 1 sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\ match ip dst 17.0.0.1/32 flowid 1:10 action simple index 1 Message before fix was: RTNETLINK answers: Invalid argument We have an error talking to the kernel Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jamal Hadi Salim 提交于
The process below was broken and is fixed with this patch. //add an mirred action and give it an instance id of 1 sudo tc actions add action mirred egress mirror dev $MDEV index 1 //create a filter which binds to mirred action id 1 sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\ match ip dst 17.0.0.1/32 flowid 1:10 action mirred index 1 Message before bug fix was: RTNETLINK answers: Invalid argument We have an error talking to the kernel Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jamal Hadi Salim 提交于
This was broken and is fixed with this patch. //add an ipt action and give it an instance id of 1 sudo tc actions add action ipt -j mark --set-mark 2 index 1 //create a filter which binds to ipt action id 1 sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\ match ip dst 17.0.0.1/32 flowid 1:10 action ipt index 1 Message before bug fix was: RTNETLINK answers: Invalid argument We have an error talking to the kernel Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jamal Hadi Salim 提交于
Late vlan action binding was broken and is fixed with this patch. //add a vlan action to pop and give it an instance id of 1 sudo tc actions add action vlan pop index 1 //create filter which binds to vlan action id 1 sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32 \ match ip dst 17.0.0.1/32 flowid 1:1 action vlan index 1 current message(before bug fix) was: RTNETLINK answers: Invalid argument We have an error talking to the kernel Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shaohui Xie 提交于
If phy was suspended and is starting, current driver always enable phy's interrupts, if phy works in polling, phy can raise unexpected interrupt which will not be handled, the interrupt will block system enter suspend again. So interrupts should only be re-enabled if phy works in interrupt. Signed-off-by: NShaohui Xie <Shaohui.Xie@nxp.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
In the very unlikely case __tcp_retransmit_skb() can not use the cloning done in tcp_transmit_skb(), we need to refresh skb_mstamp before doing the copy and transmit, otherwise TCP TS val will be an exact copy of original transmit. Fixes: 7faee5c0 ("tcp: remove TCP_SKB_CB(skb)->when") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Elad Kanfi says: ==================== nps_enet: Net driver bugs fix v3: tx_packet_sent flag is not necessary, use socket buffer pointer instead. Use wmb() instead of smp_wmb(). v2: Remove code style commit for now. Code style commit will be added after the bugs fix will be approved. Summary: 1. Bug description: TX done interrupts that arrives while interrupts are masked, during NAPI poll, will not trigger an interrupt handling. Since TX interrupt is of level edge we will lose the TX done interrupt. As a result all pending tx frames will get no service. Solution: Check if there is a pending tx request after unmasking the interrupt and if answer is yes then re-add ourselves to the NAPI poll list. 2. Bug description: CPU-A before sending a frame will set a variable to true. CPU-B that executes the tx done interrupt service routine might read a non valid value of that variable. Solution: Use the socket buffer pointer instead of the variable, and add a write memory barrier at the tx sending function after the pointer is set. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Elad Kanfi 提交于
The tx interrupt is of edge type, and in case such interrupt is triggered while it is masked it will not be handled even after tx interrupts are re-enabled in the end of NAPI poll. This will cause tx network to stop in the following scenario: * Rx is being handled, hence interrupts are masked. * Tx interrupt is triggered after checking if there is some tx to handle and before re-enabling the interrupts. In this situation only rx transaction will release tx requests. In order to handle the tx that was missed( if there was one ), a NAPI reschdule was added after enabling the interrupts. Signed-off-by: NElad Kanfi <eladkan@mellanox.com> Acked-by: NNoam Camus <noamca@mellanox.com> Acked-by: NGilad Ben-Yossef <giladby@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Elad Kanfi 提交于
Below is a description of a possible problematic sequence. CPU-A is sending a frame and CPU-B handles the interrupt that indicates the frame was sent. CPU-B reads an invalid value of tx_packet_sent. CPU-A CPU-B ----- ----- nps_enet_send_frame . . tx_skb = skb tx_packet_sent = true order HW to start tx . . HW complete tx ------> get tx complete interrupt . . if(tx_packet_sent == true) handle tx_skb end memory transaction (tx_packet_sent actually written) Furthermore there is a dependency between tx_skb and tx_packet_sent. There is no assurance that tx_skb contains a valid pointer at CPU B when it sees tx_packet_sent == true. Solution: Initialize tx_skb to NULL and use it to indicate that packet was sent, in this way tx_packet_sent can be removed. Add a write memory barrier after setting tx_skb in order to make sure that it is valid before HW is informed and IRQ is fired. Fixed sequence will be: CPU-A CPU-B ----- ----- tx_skb = skb wmb() . . order HW to start tx . . HW complete tx ------> get tx complete interrupt . . if(tx_skb != NULL) handle tx_skb tx_skb = NULL Signed-off-by: NElad Kanfi <eladkan@mellanox.com> Acked-by: NNoam Camus <noamca@mellanox.com> Acked-by: NGilad Ben-Yossef <giladby@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI fixes from Bjorn Helgaas: "Since v4.5, we've WARNed during resume if a PCI device, including a Thunderbolt device, was added while we were suspended. A change we merged for v4.6-rc1 turned that warning into a system hang. These enumeration patches from Lukas Wunner fix this issue: - Fix BUG on device attach failure - Do not treat EPROBE_DEFER as device attach failure" * tag 'pci-v4.6-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Do not treat EPROBE_DEFER as device attach failure PCI: Fix BUG on device attach failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar: "Two topology corner case fixes, and a MAINTAINERS file update for mmiotrace maintenance" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/topology: Set x86_max_cores to 1 for CONFIG_SMP=n MAINTAINERS: Add mmiotrace entry x86/topology: Handle CPUID bogosity gracefully
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fixes from Ingo Molnar: "A UP kernel cpufreq fix and a rt/dl scheduler corner case fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/rt, sched/dl: Don't push if task's scheduling class was changed sched/fair: Fix !CONFIG_SMP kernel cpufreq governor breakage
-
由 Andrey Utkin 提交于
"make defconfig kvmconfig" is supposed to end up with usable kernel for KVM guest. In practice, it won't work for e.g. Hetzner VPS (KVM-based) unless you add these options. Signed-off-by: NAndrey Utkin <andrey_utkin@fastmail.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Josh Poimboeuf 提交于
The kbuild test robot reported this objtool warning [1]: arch/x86/kvm/emulate.o: warning: objtool: fastop()+0x69: call without frame pointer save/setup The issue seems to be caused by CONFIG_PROFILE_ALL_BRANCHES. With that option, for some reason gcc decides not to create a stack frame in fastop() before doing the inline asm call, which can result in a bad stack trace. Force a stack frame to be created if CONFIG_FRAME_POINTER is enabled by listing the stack pointer as an output operand for the inline asm statement. This change has no effect for !CONFIG_PROFILE_ALL_BRANCHES. [1] https://lists.01.org/pipermail/kbuild-all/2016-March/018249.htmlReported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Acked-by: NIngo Molnar <mingo@kernel.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 10 5月, 2016 3 次提交
-
-
由 Xunlei Pang 提交于
We got this warning: WARNING: CPU: 1 PID: 2468 at kernel/sched/core.c:1161 set_task_cpu+0x1af/0x1c0 [...] Call Trace: dump_stack+0x63/0x87 __warn+0xd1/0xf0 warn_slowpath_null+0x1d/0x20 set_task_cpu+0x1af/0x1c0 push_dl_task.part.34+0xea/0x180 push_dl_tasks+0x17/0x30 __balance_callback+0x45/0x5c __sched_setscheduler+0x906/0xb90 SyS_sched_setattr+0x150/0x190 do_syscall_64+0x62/0x110 entry_SYSCALL64_slow_path+0x25/0x25 This corresponds to: WARN_ON_ONCE(p->state == TASK_RUNNING && p->sched_class == &fair_sched_class && (p->on_rq && !task_on_rq_migrating(p))) It happens because in find_lock_later_rq(), the task whose scheduling class was changed to fair class is still pushed away as if it were a deadline task ... So, check in find_lock_later_rq() after double_lock_balance(), if the scheduling class of the deadline task was changed, break and retry. Apply the same logic to RT tasks. Signed-off-by: NXunlei Pang <xlpang@redhat.com> Reviewed-by: NSteven Rostedt <rostedt@goodmis.org> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Juri Lelli <juri.lelli@arm.com> Link: http://lkml.kernel.org/r/1462767091-1215-1-git-send-email-xlpang@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Thomas Gleixner 提交于
Josef reported that the uncore driver trips over with CONFIG_SMP=n because x86_max_cores is 16 instead of 12. The reason is, that for SMP=n the extended topology detection is a NOOP and the cache leaf is used to determine the number of cores. That's wrong in two aspects: 1) The cache leaf enumerates the maximum addressable number of cores in the package, which is obviously not correct 2) UP has no business with topology bits at all. Make intel_num_cpu_cores() return 1 for CONFIG_SMP=n Reported-by: NJosef Bacik <jbacik@fb.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kernel-team <Kernel-team@fb.com> Cc: Kan Liang <kan.liang@intel.com> Link: http://lkml.kernel.org/r/761b4a2a-0332-7954-f030-c6639f949612@fb.com
-
由 Jamal Hadi Salim 提交于
Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-