Patch from Tony Lindgren

This patch syncs the mainline kernel with linux-omap tree.
The highlights of the patch are:

- Omap1 serial pport and framebuffer init updates by Imre Deak

- Add support for omap310 processor and Palm Tungsten E PDA
  by Laurent Gonzales, Romain Goyet, et al. Omap310 and
  omap1510 processors are now handled as omap15xx.

- Omap1 specific changes to shared omap clock framework
  by Tony Lindgren

- Omap1 specific changes to shared omap pin mux framework
  by Tony Lindgren

- Other misc fixes, such as update memory timings for smc91x,
  omap1 specific device initialization etc.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Alessandro Zummo

This patch adds support for the LinkSys NSLU2 running with
both big and little-endian kernels. The LinkSys NSLU2 is
a cost engineered ARM, XScale 420 based system similar to
the the Intel IXDP425 evaluation board. It uses the
IXP4XX ARCH.

While this patch applies independently of other patches
the resultant kernel requires further patches to successfully
use onboard devices, including the onboard flash. Since these
patches are independent of this one they will be submitted
separately.

A defconfig is not included here because not all of
the required drivers are actually in the kernel.
We intend to provide one as soon as the patches
will be incorporated in mainstream.

This patch is the combined work of nslu2-linux.org
Signed-off-by: NJohn Bowler <jbowler@acm.org>
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Ji-In Park discovered a bug in csumpartial which caused wrong
checksums with misaligned buffers.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Make some changes to the NEED_RESCHED and POLLING_NRFLAG to reduce
confusion, and make their semantics rigid.  Improves efficiency of
resched_task and some cpu_idle routines.

* In resched_task:
- TIF_NEED_RESCHED is only cleared with the task's runqueue lock held,
  and as we hold it during resched_task, then there is no need for an
  atomic test and set there. The only other time this should be set is
  when the task's quantum expires, in the timer interrupt - this is
  protected against because the rq lock is irq-safe.

- If TIF_NEED_RESCHED is set, then we don't need to do anything. It
  won't get unset until the task get's schedule()d off.

- If we are running on the same CPU as the task we resched, then set
  TIF_NEED_RESCHED and no further action is required.

- If we are running on another CPU, and TIF_POLLING_NRFLAG is *not* set
  after TIF_NEED_RESCHED has been set, then we need to send an IPI.

Using these rules, we are able to remove the test and set operation in
resched_task, and make clear the previously vague semantics of
POLLING_NRFLAG.

* In idle routines:
- Enter cpu_idle with preempt disabled. When the need_resched() condition
  becomes true, explicitly call schedule(). This makes things a bit clearer
  (IMO), but haven't updated all architectures yet.

- Many do a test and clear of TIF_NEED_RESCHED for some reason. According
  to the resched_task rules, this isn't needed (and actually breaks the
  assumption that TIF_NEED_RESCHED is only cleared with the runqueue lock
  held). So remove that. Generally one less locked memory op when switching
  to the idle thread.

- Many idle routines clear TIF_POLLING_NRFLAG, and only set it in the inner
  most polling idle loops. The above resched_task semantics allow it to be
  set until before the last time need_resched() is checked before going into
  a halt requiring interrupt wakeup.

  Many idle routines simply never enter such a halt, and so POLLING_NRFLAG
  can be always left set, completely eliminating resched IPIs when rescheduling
  the idle task.

  POLLING_NRFLAG width can be increased, to reduce the chance of resched IPIs.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Con Kolivas <kernel@kolivas.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Run idle threads with preempt disabled.

Also corrected a bugs in arm26's cpu_idle (make it actually call schedule()).
How did it ever work before?

Might fix the CPU hotplugging hang which Nigel Cunningham noted.

We think the bug hits if the idle thread is preempted after checking
need_resched() and before going to sleep, then the CPU offlined.

After calling stop_machine_run, the CPU eventually returns from preemption and
into the idle thread and goes to sleep.  The CPU will continue executing
previous idle and have no chance to call play_dead.

By disabling preemption until we are ready to explicitly schedule, this bug is
fixed and the idle threads generally become more robust.

From: alexs <ashepard@u.washington.edu>

  PPC build fix

From: Yoichi Yuasa <yuasa@hh.iij4u.or.jp>

  MIPS build fix
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NYoichi Yuasa <yuasa@hh.iij4u.or.jp>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch removes almost all inclusions of linux/version.h.  The 3
#defines are unused in most of the touched files.

A few drivers use the simple KERNEL_VERSION(a,b,c) macro, which is
unfortunatly in linux/version.h.

There are also lots of #ifdef for long obsolete kernels, this was not
touched.  In a few places, the linux/version.h include was move to where
the LINUX_VERSION_CODE was used.

quilt vi `find * -type f -name "*.[ch]"|xargs grep -El '(UTS_RELEASE|LINUX_VERSION_CODE|KERNEL_VERSION|linux/version.h)'|grep -Ev '(/(boot|coda|drm)/|~$)'`

search pattern:
/UTS_RELEASE\|LINUX_VERSION_CODE\|KERNEL_VERSION\|linux\/\(utsname\|version\).h
Signed-off-by: NOlaf Hering <olh@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

save_and_disable_irqs does not need to use mov + msr (which was
introduced to work around a documentation bug which was propagated
into binutils.)  Use msr with an immediate constant, and if we're
building for ARMv6 or later, use the new CPSID instruction.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Nicolas Pitre

Looks clearer this way.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

Fix the map_desc initialisers for the SMDK2440 machine
to use the new .pfn method, and at the same time making
the differntiation between ISA IO and Memory space
accesses
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

Change the initialiser for the map_desc for the
iPAQ RX3715 to use the new pfn initialiser, and
also reduce the amount of ISA space mapped (we
only need to stop any ISA IO writes OOPsing
the system, so do not need >1Mbyte of space)
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

Fix the map_desc initialisers for the Simtec Anubis
board to match the new initialiser scheme.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add platform specific parts for hotplug CPU support for the
Realview board.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add platform specific parts for local timer support for the
Realview board.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Nicolas Pitre

Make it completely deterministic and leave nothing to chance
(even if it had at worst 0.001% probability of failing).
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Nicolas Pitre

Noticed by Woody Suwalski <woodys@xandros.com>.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

Force a watchdog reset if the system fails to
decompress properly.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Dirk Opfer

This patch updates the tosa machine to use the new SharpSL PCMCIA layer introduced with Patch #3093/1

Depends on #3093/1
Signed-off-by: NDirk Opfer <Dirk@Opfer-Online.de>
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Richard Purdie

The Sharp SL-Cxx00 models have a combined power control for the SD
and CF slot 0. This patch adds hooks to the scoop driver to allow
machines to provide a custom control function for this and such a
function is added for spitz/akita/borzoi.

It also moves the gpio init code into the machine files as this
is machine dependent and differs between some models. A couple of
warnings when compiling for collie are also fixed.

Signed-off-by: Richard Purdie
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

Fix the map_desc entries to use the new .pfn
initialiser for the Simtec BAST machine support.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

Fix the initialisation of the map_desc fields
in the Thorcom VR1000 machine support to use
the new .pfn initialiser.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Dirk Opfer

This patch adds MMC, IRDA and UDC support to the Sharp SL-6000x device. Also it adds a platform device for the keyboard driver.

Signed-off-by: Dirk Opfer
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add infrastructure for supporting per-cpu local timers to update
the profiling information and update system time accounting.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/arm/kernel/irq.c:998:26: warning: Using plain integer as NULL pointer
arch/arm/kernel/smp.c:145:25: warning: Using plain integer as NULL pointer
arch/arm/kernel/smp.c:362:5: warning: symbol 'smp_call_function_on_cpu' was not declared. Should it be static?
drivers/video/amba-clcd.c:521:12: warning: symbol 'amba_clcdfb_init' was not declared. Should it be static?
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Until we have local timer support, we need to broadcast the
timer interrupt to the other CPUs.  Also, add the missing
smp_send_timer() prototype to asm/smp.h
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch puts into place the final piece of the puzzle for SMP
support on ARM.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Lennert Buytenhek

Since we have to use XCB=101 instead of XCB=000 on the ixp2400 to
prevent it from regularly falling over, and since we have to deal with
manual write buffer flushing because of that, we might as well use
XCB=101 on all ixp2000 platforms since it's faster than XCB=000.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Lennert Buytenhek

nwfpe extended precision emulation used to be broken on big-endian
and was therefore disabled.  This patch fixes nwfpe so that it copies
extended precision floats to/from userspace in the proper word order
(similar to patch #2046, see the description of that patch for an
explanation) and reenables the Kconfig option.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Lennert Buytenhek

The routine that nwfpe uses for converting floats/doubles to
extended precision fails to zero two bytes of kernel stack.  This
is not immediately obvious, as the floatx80 structure has 16 bits
of implicit padding (by design.)  These two bytes are copied to
userspace when an stfe is emulated, causing a possible info leak.

Make the padding explicit and zero it out in the relevant places.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add SMP support for the MPcore tile fitted to the Realview ARM
platform.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add uniprocessor support for Realview platform fitted with the
MPcore (SMP) tile.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This is the arch/ part of the big kfree cleanup patch.

Remove pointless checks for NULL prior to calling kfree() in arch/.
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Acked-by: NGrant Grundler <grundler@parisc-linux.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The sys_ptrace boilerplate code (everything outside the big switch
statement for the arch-specific requests) is shared by most architectures.
This patch moves it to kernel/ptrace.c and leaves the arch-specific code as
arch_ptrace.

Some architectures have a too different ptrace so we have to exclude them.
They continue to keep their implementations.  For sh64 I had to add a
sh64_ptrace wrapper because it does some initialization on the first call.
For um I removed an ifdefed SUBARCH_PTRACE_SPECIAL block, but
SUBARCH_PTRACE_SPECIAL isn't defined anywhere in the tree.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NPaul Mackerras <paulus@samba.org>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Acked-By: NDavid Howells <dhowells@redhat.com>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix more include file problems that surfaced since I submitted the previous
fix-missing-includes.patch.  This should now allow not to include sched.h
from module.h, which is done by a followup patch.
Signed-off-by: NTim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

We need to set the shared memory attribute in the page tables
on SMP systems to allow the cache coherency to operate.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

glibc expects to count lines beginning with "processor" to determine
the number of processors, not lines beginning with "Processor".  So,
give glibc the format it expects.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

We don't want to call dump_cpu_info() from cpu_init() after boot since
it produces a lot of unnecessary noise - since cpu_init() gets called
on resume and hotplug cpu insertion events.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>