- 14 9月, 2005 15 次提交
-
-
由 Nishanth Aravamudan 提交于
Use schedule_timeout_interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Pavel Roskin 提交于
Author: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: NPavel Roskin <proski@gnu.org> Use new Wireless Extension API for wireless stats. Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 John W. Linville 提交于
Add support for ETHTOOL_GPERMADDR to via-rhine. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 John W. Linville 提交于
Add support for ETHTOOL_GPERMADDR to sundance. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 John W. Linville 提交于
Add support for ETHTOOL_GPERMADDR to skge. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 John W. Linville 提交于
Add support for ETHTOOL_GPERMADDR to r8169. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 John W. Linville 提交于
Add support for ETHTOOL_GPERMADDR to pcnet32. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 John W. Linville 提交于
Add support for ETHTOOL_GPERMADDR to ne2k-pci. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 John W. Linville 提交于
Add support for ETHTOOL_GPERMADDR to ixgb. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 John W. Linville 提交于
Add support for ETHTOOL_GPERMADDR to forcedeth. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 John W. Linville 提交于
Add support for ETHTOOL_GPERMADDR to e100. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 John W. Linville 提交于
Add support for ETHTOOL_GPERMADDR to e1000. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 John W. Linville 提交于
Add support for ETHTOOL_GPERMADDR to b44. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 John W. Linville 提交于
Add support for ETHTOOL_GPERMADDR to 8139too. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 John W. Linville 提交于
Add support for ETHTOOL_GPERMADDR to 8139cp. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
- 13 9月, 2005 7 次提交
-
-
由 Peter Osterlund 提交于
Remove check_region references from comments and printk statements so that searching for real users of this deprecated function gets easier. Signed-off-by: NPeter Osterlund <petero2@telia.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Komuro 提交于
Add new id to orinoco_cs (corega PCCB-11). Signed-off-by: <komurojun-mbn@nifty.com> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 John W. Linville 提交于
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John W. Linville 提交于
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John W. Linville 提交于
Instead, count them as part of rx_missed_errors. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ralf Baechle 提交于
Rename ax25_encapsulate to ax25_hard_header which these days more accurately describes what the function is supposed to do. Signed-off-by: NRalf Baechle DL5RB <ralf@linux-mips.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ralf Baechle 提交于
Misc related cleanups in hamradio drivers: o Use symbolic constants instead of magic numbers o Don't try to handle the case where AX.25 isn't configured - the kernel configuration doesn't permit that. o Remove useless headers Signed-off-by: NRalf Baechle DL5RB <ralf@linux-mips.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 9月, 2005 5 次提交
-
-
由 Greg Ungerer 提交于
Add support for the FEC ethernet driver of the Freescale 523x processor family to the FEC header definitions. Signed-off-by: NGreg Ungerer <gerg@uclinux.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
A few improvements to the Freescale/ColdFire FEC driver: . some formatting cleanups . add support for the FEC device in the ColdFire 523x processor family . add support for MAC address setting on MOD5272 and M5272C3 boards . don't re-read the PHY status register many times . ack status interrupt before reading status register . move printing init message to after full init (so that the ethX name is filled out for printing) Some parts of this patch submitted by Philippe De Muyter <phdm@macqel.be> Signed-off-by: NGreg Ungerer <gerg@uclinux.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Add configuration support for the FEC ethernet controller in the Freescale 523x processor family. Also add and option to configure the second FEC controller on some Freescale processors. Signed-off-by: NGreg Ungerer <gerg@uclinux.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Willy Tarreau 提交于
This ports the Sun GEM ROM mapping/enable fixes it sunhme (which used the same PCI ROM mapping code). Without this, I get NULL MAC addresses for all 4 ports (it's a SUN QFE). With it, I get the correct addresses (the ones printed on the label on the card). Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
This same patch was reported to fix the MAC address detection on sunhme (next patch). Most people seem to be running this on Sparcs or PPC machines, where we get the MAC address from their respective firmware rather than from the (previously broken) ROM mapping routines. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 11 9月, 2005 3 次提交
-
-
由 Domen Puncer 提交于
s/for/list_for_each/ Signed-off-by: NMaximilian Attems <janitor@sternwelten.at> Signed-off-by: NDomen Puncer <domen@coderock.org> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Domen Puncer 提交于
Make code more readable with list_for_each_entry. Signed-off-by: NMaximilian Attems <janitor@sternwelten.at> Signed-off-by: NDomen Puncer <domen@coderock.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jesper Juhl 提交于
This patch does a full cleanup of 'NULL checks before vfree', and a partial cleanup of calls to kfree for all of drivers/ - the kfree bit is partial in that I only did the files that also had vfree calls in them. The patch also gets rid of some redundant (void *) casts of pointers being passed to [vk]free, and a some tiny whitespace corrections also crept in. Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 10 9月, 2005 3 次提交
-
-
由 Ingo Molnar 提交于
This converts the final 20 DEFINE_SPINLOCK holdouts. (another 580 places are already using DEFINE_SPINLOCK). Build tested on x86. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ingo Molnar 提交于
Clean up timer initialization by introducing DEFINE_TIMER a'la DEFINE_SPINLOCK. Build and boot-tested on x86. A similar patch has been been in the -RT tree for some time. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Deepak Saxena 提交于
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Cc: Matt Mackall <mpm@selenic.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 9月, 2005 3 次提交
-
-
由 Alan Stern 提交于
29 July 2005, Cambridge, MA: This afternoon Alan Stern submitted a patch to remove the URB_ASYNC_UNLINK flag from the Linux kernel. Mr. Stern explained, "This flag is a relic from an earlier, less-well-designed system. For over a year it hasn't been used for anything other than printing warning messages." An anonymous spokesman for the Linux kernel development community commented, "This is exactly the sort of thing we see happening all the time. As the kernel evolves, support for old techniques and old code can be jettisoned and replaced by newer, better approaches. Proprietary operating systems do not have the freedom or flexibility to change so quickly." Mr. Stern, a staff member at Harvard University's Rowland Institute who works on Linux only as a hobby, noted that the patch (labelled as548) did not update two files, keyspan.c and option.c, in the USB drivers' "serial" subdirectory. "Those files need more extensive changes," he remarked. "They examine the status field of several URBs at times when they're not supposed to. That will need to be fixed before the URB_ASYNC_UNLINK flag is removed." Greg Kroah-Hartman, the kernel maintainer responsible for overseeing all of Linux's USB drivers, did not respond to our inquiries or return our calls. His only comment was "Applied, thanks." Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
This patch removes CONFIG_PCI_NAMES. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Michael Chan 提交于
Fix bug in bnx2_interrupt() that caused an unnecessary register read. The BNX2_PCICFG_MISC_STATUS should only be read when the status tag has not changed. Add prefetch of the status block in bnx2_msi() similar to tg3_msi(). The status block is not touched in bnx2_msi() and prefetching it will speed up bnx2_poll() that will run on the same CPU that received the MSI. Update version. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 9月, 2005 4 次提交
-
-
由 viro@ZenIV.linux.org.uk 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 viro@ZenIV.linux.org.uk 提交于
All uses of ADDRLEN are comparisons with 64 (it's an address width). added define to 32 (again, we only care about comparisons with 64) if not defined. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 viro@zenIV.linux.org.uk 提交于
u64 is not uintptr_t; unsigned long is... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Brice Goglin 提交于
I noticed a strange return value in smsc_ircc_init in drivers/net/irda/smsc_ircc2.c in rc4-mm1. When reaching the line "if (ircc_fir > 0 && ircc_sir > 0)", ret is 0. So I don't see the point of setting it to 0 in the "else" case. >From what I see in 2.6.12 it should probably be set to -ENODEV at the begining of the "else" case. The attached patch does this. Note that I didn't actually see any breakage caused by this. Signed-off-by: NBrice Goglin <Brice.Goglin@ens-lyon.org> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-