Merge tag 'regulator-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into next

Pull regulator updates from Mark Brown:
 "The bulk of the changes for this release are a few new drivers however
  there are a couple of noticable core changes and the usual stream of
  cleanups and fixes:

   - move disable of unused regulators later in init so it comes after
     deferred probe has iterated making startup smoother.
   - fixes to reference counting of the DT nodes for constraints from
     Charles Keepax.  This has little practical impact since all real
     users of the regulator bindings use FDT which doesn't need the
     reference counting.
   - lots of cleanups, especially to the Samsung drivers.
   - support for Linear Technologies LTC3589, Texas Instruments
     TPS658640 and X-Powers AXP20x"

* tag 'regulator-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (64 commits)
  regulator: pbias: remove unnecessary OOM messages
  regulator: max8649: remove unnecessary OOM messages
  regulator: core: Fix the init of DT defined fixed regulators
  regulator: core: Disable unused regulators after deferred probing is done
  regulator: Don't disable unused regulators we don't have permission for
  regulator: axp20x: Use regulator_map_voltage_ascend for LDO4
  regulator: use of_property_read_{bool|u32}()
  regulator: Fix regulator_get_{optional,exclusive}() documentation
  regulators: Add definition of regulator_set_voltage_time() for !CONFIG_REGULATOR
  regulator: arizona-ldo1: add missing #include
  regulator: pfuze100: Support enable/disable for fixed regulator
  regulator: ltc3589: Remove ltc3589_list_voltage_fixed function
  regulator: ltc3589: Fix module dependency
  regulator: tps6586x: Remove unused to_tps6586x_dev() function
  regulator: tps65218: Convert to use regulator_set_voltage_time_sel
  regulator: tps6586x: Add support for the TPS658640
  regulator: tps6586x: Prepare supporting fixed regulators
  regulator: pfuze100: Don't allocate an invalid gpio
  regulator: pfuze100: Support SWB enable/disable
  regulator: fixed: use of_property_read_{bool|u32}()
  ...

Pull spi updates from Mark Brown:
 "For this release SPI has been exceptionally quiet, all the work has
  been on improving drivers (including taking advantage of some of the
  recent framework updates):

   - DMA support for the rspi driver providing a nice performance boost
   - performance improvement for the SIRF controller in PIO mode
   - new support for the Cadence SPI IP and for pxa2xx on BayTrail"

* tag 'spi-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (59 commits)
  spi: rspi: Extract rspi_common_transfer()
  spi: rspi: Add DMA support for RSPI on RZ/A1H
  spi: rspi: Add DMA support for QSPI on R-Car Gen2
  spi: rspi: Absorb rspi_rz_transfer_out_in() into rspi_rz_transfer_one()
  spi: rspi: Merge rspi_*_dma() into rspi_dma_transfer()
  spi: rspi: Pass sg_tables instead of spi_tranfer to rspi_*_dma()
  spi: rspi: Move RSPI-specific setup out of DMA routines
  spi: rspi: Use SPI core DMA mapping framework
  spi: rspi: SPI DMA core needs both RX and TX DMA to function
  spi: rspi: Remove unneeded resource test in DMA setup
  spi: rspi: Extract rspi_request_dma_chan()
  spi: rspi: Don't consider DMA configuration failures fatal
  spi: rspi: Extract rspi_pio_transfer()
  spi: rspi: Use core SPI_MASTER_MUST_[RT]X handling
  spi: rspi: Remove unused 16-bit DMA support
  spi: rspi: Do not call rspi_receive_init() for TX-only
  spi: rspi: Extract rspi_wait_for_{tx_empty,rx_full}()
  spi/pxa2xx: fix runtime PM enabling order
  spi/fsl-espi: fix rx_buf in fsl_espi_cmd_trans()/fsl_espi_rw_trans()
  spi: core: Ignore unsupported spi-[tr]x-bus-width property values
  ...

Pull regmap updates from Mark Brown:
 "Another fairly quiet release, a few bug fixes and a couple of new
  features:

   - support for I2C devices connected to SMBus rather than full I2C
     controllers contributed by Boris Brezillon.  If the controller is
     only capable of SMBus operation the framework will transparently
     fall back to that

   - suport for little endian values, contributed by Xiubo Li"

* tag 'regmap-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: mmio: Fix regmap_mmio_write for uneven counts
  regmap: irq: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
  regmap: Add missing initialization of this_page
  regmap: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
  regmap: i2c: fallback to SMBus if the adapter does not support standard I2C
  regmap: add reg_read/reg_write callbacks to regmap_bus struct
  regmap: rbtree: improve 64bits memory alignment
  regmap: mmio: Fix the bug of 'offset' value parsing.
  regmap: implement LE formatting/parsing for 16/32-bit values.

Merge tag 'pinctrl-v3.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl into next

Pull pin control changes from Linus Walleij:
 "This is the bulk of pin control changes for the v3.16 development
  cycle:

   - Antoine Tenart made the get_group_pins() vtable entry optional.

   - Antoine also provides an entirely new driver for the Marvell Berlin
     SoC.  This is unrelated to the existing MVEBU hardware driver and
     warrants its own separate driver.

   - reflected from the GPIO subsystem there is a number of refactorings
     to make pin control drivers with gpiochips use the new gpiolib
     irqchip helpers.  The following drivers were converted to use the
     new infrastructure:
       * ST Microelectronics STiH416 and friends
       * The Atmel AT91
       * The CSR SiRF (Prima2)
       * The Qualcomm MSM series

   - massive improvements in the Qualcomm MSM driver from Bjorn
     Andersson, Andy Gross and Kumar Gala.  Among those new support for
     the IPQ8064 and MSM8x74 SoC variants.

   - support for the Freescale i.MX6 SoloX SoC variant.

   - massive improvements in the Allwinner sunxi driver from Boris
     Brezillon, Maxime Ripard and Chen-Yu Tsai.

   - Renesas PFC updates from Laurent Pinchart, Kuninori Morimoto,
     Wolfram Sang and Magnus Damm.

   - Cleanups and refactorings of the nVidia Tegra driver from Stepgen
     Warren.

   - the Exynos driver now supports the Exynos3250 SoC.

   - Intel BayTrail updates from Jin Yao, Mika Westerberg.

   - the MVEBU driver now supports the Orion5x SoC variants, which is
     part of the effort of getting rid of the old Marvell kludges in
     arch/arm/mach-orion5x

   - Rockchip driver updates from Heiko Stuebner.

   - a ton of cleanups and janitorial patches from Axel Lin.

   - some minor fixes and improvements here and there"

* tag 'pinctrl-v3.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (93 commits)
  pinctrl: sirf: fix a bad conflict resolution
  pinctrl: msm: Add more MSM8X74 pin definitions
  pinctrl: qcom: ipq8064: Fix naming convention
  pinctrl: msm: Add missing sdc1 and sdc3 groups
  pinctrl: sirf: switch to using allocated state container
  pinctrl: Enable "power-source" to be extracted from DT files
  pinctrl: sunxi: create irq/pin mapping during init
  pinctrl: pinconf-generic: Use kmemdup instead of kmalloc + memcpy
  pinctrl: berlin: Use devm_ioremap_resource()
  pinctrl: sirf: fix typo for GPIO bank number
  pinctrl: sunxi: depend on RESET_CONTROLLER
  pinctrl: sunxi: fix pin numbers passed to register offset helpers
  pinctrl: add pinctrl driver for imx6sx
  pinctrl/at91: Fix lockup when IRQ on PIOC and PIOD occurs
  pinctrl: msm: switch to using generic GPIO irqchip helpers
  pinctrl: sunxi: Fix multiple registration issue
  pinctrl: sunxi: Fix recursive dependency
  pinctrl: berlin: add the BG2CD pinctrl driver
  pinctrl: berlin: add the BG2 pinctrl driver
  pinctrl: berlin: add the BG2Q pinctrl driver
  ...

Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging into next

Pull hwmon updates from Guenter Roeck:
 "New driver for NCT6683D

  New chip support to existing drivers:
   - add support for STTS2004 and AT30TSE004 to jc42 driver
   - add support for EMC1402/EMC1412/EMC1422 to emc1403 driver

  Other notable changes:
   - document hwmon kernel API
   - convert jc42, lm70, lm75, lm77, lm83, lm92, max1619, tmp421, and
     tmp102 drivers to use new hwmon API functions
   - replace function macros in lm80, lm92, and jc42 drivers with real
     code
   - convert emc1403 driver to use regmap, add support for additional
     attributes, and add device IDs for EMC1412, EMC1413, and EMC1414
   - various additional cleanup and minor bug fixes in several drivers"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (60 commits)
  hwmon: (nct6775) Fix probe unwind paths to properly unregister platform devices
  hwmon: (nct6683) Fix probe unwind paths to properly unregister platform devices
  hwmon: (ultra45_env) Introduce managed version of kzalloc
  hwmon: Driver for NCT6683D
  hwmon: (lm80) Rearrange code to avoid forward declarations
  hwmon: (lm80) Convert fan display function macros into functions
  hwmon: (lm80) Convert voltage display function macros into functions
  hwmon: (lm80) Convert temperature display function macros into functions
  hwmon: (lm80) Normalize all temperature values to 16 bit
  hwmon: (lm80) Simplify TEMP_FROM_REG
  hwmon: (lm83) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (lm83) Rearange code to avoid forward declarations
  hwmon: (lm83) Drop FSF address
  hwmon: (max1619) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (max1619) Drop function macros
  hwmon: (max1619) Rearrange code to avoid forward declarations
  hwmon: (max1619) Drop FSF address
  hwmon: (max1619) Fix critical alarm display
  hwmon: (jc42) Add support for STTS2004 and AT30TSE004
  hwmon: (jc42) Convert function macros into functions
  ...

Pull first set of s390 updates from Martin Schwidefsky:
 "The biggest change in this patchset is conversion from the bootmem
  bitmaps to the memblock code.  This conversion requires two common
  code patches to introduce the 'physmem' memblock list.

  We experimented with ticket spinlocks but in the end decided against
  them as they perform poorly on virtualized systems.  But the spinlock
  cleanup and some small improvements are included.

  The uaccess code got another optimization, the get_user/put_user calls
  are now inline again for kernel compiles targeted at z10 or newer
  machines.  This makes the text segment shorter and the code gets a
  little bit faster.

  And as always some bug fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (31 commits)
  s390/lowcore: replace lowcore irb array with a per-cpu variable
  s390/lowcore: reserve 96 bytes for IRB in lowcore
  s390/facilities: remove extract-cpu-time facility check
  s390: require mvcos facility for z10 and newer machines
  s390/boot: fix boot of compressed kernel built with gcc 4.9
  s390/cio: remove weird assignment during argument evaluation
  s390/time: cast tv_nsec to u64 prior to shift in update_vsyscall
  s390/oprofile: make return of 0 explicit
  s390/spinlock: refactor arch_spin_lock_wait[_flags]
  s390/rwlock: add missing local_irq_restore calls
  s390/spinlock,rwlock: always to a load-and-test first
  s390/cio: fix multiple structure definitions
  s390/spinlock: fix system hang with spin_retry <= 0
  s390/appldata: add slab.h for kzalloc/kfree
  s390/uaccess: provide inline variants of get_user/put_user
  s390/pci: add some new arch specific pci attributes
  s390/pci: use pdev->dev.groups for attribute creation
  s390/pci: use macro for attribute creation
  s390/pci: improve state check when processing hotplug events
  s390: split TIF bits into CIF, PIF and TIF bits
  ...

Pull USB driver updates from Greg KH:
 "Here is the big USB driver pull request for 3.16-rc1.

  Nothing huge here, but lots of little things in the USB core, and in
  lots of drivers.  Hopefully the USB power management will be work
  better now that it has been reworked to do per-port power control
  dynamically.  There's also a raft of gadget driver updates and fixes,
  CONFIG_USB_DEBUG is finally gone now that everything has been
  converted over to the dynamic debug inteface, the last hold-out
  drivers were cleaned up and the config option removed.  There were
  also other minor things all through the drivers/usb/ tree, the
  shortlog shows this pretty well.

  All have been in linux-next, including the very last patch, which came
  from linux-next to fix a build issue on some platforms"

* tag 'usb-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (314 commits)
  usb: hub_handle_remote_wakeup() only exists for CONFIG_PM=y
  USB: orinoco_usb: remove CONFIG_USB_DEBUG support
  USB: media: lirc: igorplugusb: remove CONFIG_USB_DEBUG support
  USB: media: streamzap: remove CONFIG_USB_DEBUG
  USB: media: redrat3: remove CONFIG_USB_DEBUG usage
  USB: media: redrat3: remove unneeded tracing macro
  usb: qcserial: add additional Sierra Wireless QMI devices
  usb: host: max3421-hcd: Use module_spi_driver
  usb: host: max3421-hcd: Allow platform-data to specify Vbus polarity
  usb: host: max3421-hcd: fix "spi_rd8" uses dynamic stack allocation warning
  usb: host: max3421-hcd: Fix missing unlock in max3421_urb_enqueue()
  usb: qcserial: add Netgear AirCard 341U
  Documentation: dt-bindings: update xhci-platform DT binding for R-Car H2 and M2
  usb: host: xhci-plat: add xhci_plat_start()
  usb: host: max3421-hcd: Fix potential NULL urb dereference
  Revert "usb: gadget: net2280: Add support for PLX USB338X"
  USB: usbip: remove CONFIG_USB_DEBUG reference
  USB: remove CONFIG_USB_DEBUG from defconfig files
  usb: resume child device when port is powered on
  usb: hub_handle_remote_wakeup() depends on CONFIG_PM_RUNTIME=y
  ...

Pull tty/serial driver updates from Greg KH:
 "Here is the big tty / serial driver pull request for 3.16-rc1.

  A variety of different serial driver fixes and updates and additions,
  nothing huge, and no real major core tty changes at all.

  All have been in linux-next for a while"

* tag 'tty-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (84 commits)
  Revert "serial: imx: remove the DMA wait queue"
  serial: kgdb_nmi: Improve console integration with KDB I/O
  serial: kgdb_nmi: Switch from tasklets to real timers
  serial: kgdb_nmi: Use container_of() to locate private data
  serial: cpm_uart: No LF conversion in put_poll_char()
  serial: sirf: Fix compilation failure
  console: Remove superfluous readonly check
  console: Use explicit pointer type for vc_uni_pagedir* fields
  vgacon: Fix & cleanup refcounting
  ARM: tty: Move HVC DCC assembly to arch/arm
  tty/hvc/hvc_console: Fix wakeup of HVC thread on hvc_kick()
  drivers/tty/n_hdlc.c: replace kmalloc/memset by kzalloc
  vt: emulate 8- and 24-bit colour codes.
  printk/of_serial: fix serial console cessation part way through boot.
  serial: 8250_dma: check the result of TX buffer mapping
  serial: uart: add hw flow control support configuration
  tty/serial: at91: add interrupts for modem control lines
  tty/serial: at91: use mctrl_gpio helpers
  tty/serial: Add GPIOLIB helpers for controlling modem lines
  ARM: at91: gpio: implement get_direction
  ...

Merge tag 'staging-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging into next

Pull staging driver updates from Greg KH:
 "Here is the big staging driver pull request for 3.16-rc1.

  Lots of stuff here, tons of cleanup patches, a few new drivers, and
  some removed as well, but I think we are still adding a few thousand
  more lines than we remove, due to the new drivers being bigger than
  the ones deleted.

  One notible bit of work did stand out, Jes Sorensen has gone on a
  tear, fixing up a wireless driver to be "more sane" than it originally
  was from the vendor, with over 500 patches merged here.  Good stuff,
  and a number of users laptops are better off for it.

  All of this has been in linux-next for a while"

* tag 'staging-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1703 commits)
  staging: skein: fix sparse warning for static declarations
  staging/mt29f_spinand: coding style fixes
  staging: silicom: fix sparse warning for static variable
  staging: lustre: Fix coding style
  staging: android: binder.c: Use more appropriate functions for euid retrieval
  staging: lustre: fix integer as NULL pointer warnings
  Revert "staging: dgap: remove unneeded kfree() in dgap_tty_register_ports()"
  Staging: rtl8192u: r8192U_wx.c Fixed a misplaced brace
  staging: ion: shrink highmem pages on kswapd
  staging: ion: use compound pages on high order pages for system heap
  staging: ion: remove struct ion_page_pool_item
  staging: ion: simplify ion_page_pool_total()
  staging: ion: tidy up a bit
  staging: rtl8723au: Remove redundant casting in usb_ops_linux.c
  staging: rtl8723au: Remove redundant casting in rtl8723a_hal_init.c
  staging: rtl8723au: Remove redundant casting in rtw_xmit.c
  staging: rtl8723au: Remove redundant casting in rtw_wlan_util.c
  staging: rtl8723au: Remove redundant casting in rtw_sta_mgt.c
  staging: rtl8723au: Remove redundant casting in rtw_recv.c
  staging: rtl8723au: Remove redundant casting in rtw_mlme.c
  ...

Merge tag 'driver-core-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into next

Pull driver core / kernfs changes from Greg KH:
 "Here is the "big" pull request for 3.16-rc1.

  Not a lot of changes here, some kernfs work, a revert of a very old
  driver core change that ended up cauing some memory leaks on driver
  probe error paths, and other minor things.

  As was pointed out earlier today, one commit here, 26fc9cd2
  ("kernfs: move the last knowledge of sysfs out from kernfs") is also
  needed in your 3.15-final branch as well.  If you could cherry-pick it
  there, it would be most appreciated by Andy Lutomirski to prevent a
  regression there.

  All of these have been in linux-next for a while"

* tag 'driver-core-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  crypto/nx/nx-842: dev_set_drvdata can no longer fail
  kernfs: move the last knowledge of sysfs out from kernfs
  sysfs: fix attribute_group bin file path on removal
  sysfs.h: don't return a void-valued expression in sysfs_remove_file
  init.h: Update initcall_sync variants to fix build errors
  driver core: Inline dev_set/get_drvdata
  driver core: dev_get_drvdata: Don't check for NULL dev
  driver core: dev_set_drvdata returns void
  driver core: dev_set_drvdata can no longer fail
  driver core: Move driver_data back to struct device
  lib/devres.c: fix checkpatch warnings
  lib/devres.c: use dev in devm_request_and_ioremap
  kobject: Make support for uevent_helper optional.
  kernfs: make kernfs_notify() trigger inotify events too
  kernfs: implement kernfs_root->supers list

Merge tag 'char-misc-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc into next

Pull char/misc driver patches from Greg KH:
 "Here is the big char / misc driver update for 3.16-rc1.

  Lots of different driver updates for a variety of different drivers
  and minor driver subsystems.

  All have been in linux-next with no reported issues"

* tag 'char-misc-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (79 commits)
  hv: use correct order when freeing monitor_pages
  spmi: of: fixup generic SPMI devicetree binding example
  applicom: dereferencing NULL on error path
  misc: genwqe: fix uninitialized return value in genwqe_free_sync_sgl()
  miscdevice.h: Simple syntax fix to make pointers consistent.
  MAINTAINERS: Add miscdevice.h to file list for char/misc drivers.
  mcb: Add support for shared PCI IRQs
  drivers: Remove duplicate conditionally included subdirs
  misc: atmel_pwm: only build for supported platforms
  mei: me: move probe quirk to cfg structure
  mei: add per device configuration
  mei: me: read H_CSR after asserting reset
  mei: me: drop harmful wait optimization
  mei: me: fix hw ready reset flow
  mei: fix memory leak of mei_clients array
  uio: fix vma io range check in mmap
  drivers: uio_dmem_genirq: Fix memory leak in uio_dmem_genirq_probe()
  w1: do not unlock unheld list_mutex in __w1_remove_master_device()
  w1: optional bundling of netlink kernel replies
  connector: allow multiple messages to be sent in one packet
  ...

Pull m68knommu updates from Greg Ungerer:
 "Nothing too big, just a handfull of small changes.

  A couple of dragonball fixes, coldfire qspi cleanup and fixes, and
  some coldfire gpio cleanup, fixes and extensions"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: Implement gpio support for m54xx.
  m68knommu: Make everything thats not exported, static.
  m68knommu: setting the gpio data direction register to output doesn't dependent upon the value to output!
  m68knommu: add to_irq function so we can map gpios to external interrupts.
  m68knommu: qspi declutter.
  m68knommu: Fix the 5249/525x qspi base address.
  m68knommu: Add qspi clk for Coldfire SoCs without real clks.
  m68k: fix a compiler warning when building for DragonBall
  m68knommu: Fix mach_sched_init for EZ and VZ DragonBall chips

Pull ARM SoC driver changes from Olof Johansson:
 "SoC-near driver changes that we're merging through our tree.  Mostly
  because they depend on other changes we have staged, but in some cases
  because the driver maintainers preferred that we did it this way.

  This contains a largeish cleanup series of the omap_l3_noc bus driver,
  cpuidle rework for Exynos, some reset driver conversions and a long
  branch of TI EDMA fixes and cleanups, with more to come next release.

  The TI EDMA cleanups is a shared branch with the dmaengine tree, with
  a handful of Davinci-specific fixes on top.

  After discussion at last year's KS (and some more on the mailing
  lists), we are here adding a drivers/soc directory.  The purpose of
  this is to keep per-vendor shared code that's needed by different
  drivers but that doesn't fit into the MFD (nor drivers/platform)
  model.  We expect to keep merging contents for this hierarchy through
  arm-soc so we can keep an eye on what the vendors keep adding here and
  not making it a free-for-all to shove in crazy stuff"

* tag 'drivers-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits)
  cpufreq: exynos: Fix driver compilation with ARCH_MULTIPLATFORM
  tty: serial: msm: Remove direct access to GSBI
  power: reset: keystone-reset: introduce keystone reset driver
  Documentation: dt: add bindings for keystone pll control controller
  Documentation: dt: add bindings for keystone reset driver
  soc: qcom: fix of_device_id table
  ARM: EXYNOS: Fix kernel panic when unplugging CPU1 on exynos
  ARM: EXYNOS: Move the driver to drivers/cpuidle directory
  ARM: EXYNOS: Cleanup all unneeded headers from cpuidle.c
  ARM: EXYNOS: Pass the AFTR callback to the platform_data
  ARM: EXYNOS: Move S5P_CHECK_SLEEP into pm.c
  ARM: EXYNOS: Move the power sequence call in the cpu_pm notifier
  ARM: EXYNOS: Move the AFTR state function into pm.c
  ARM: EXYNOS: Encapsulate the AFTR code into a function
  ARM: EXYNOS: Disable cpuidle for exynos5440
  ARM: EXYNOS: Encapsulate boot vector code into a function for cpuidle
  ARM: EXYNOS: Pass wakeup mask parameter to function for cpuidle
  ARM: EXYNOS: Remove ifdef for scu_enable in pm
  ARM: EXYNOS: Move scu_enable in the cpu_pm notifier
  ARM: EXYNOS: Use the cpu_pm notifier for pm
  ...

Pull ARM SoC devicetree updates from Olof Johansson:
 "As with previous release, this continues to be among the largest
  branches we merge, with lots of new contents.

  New things for this release are among other things:

   - DTSI contents for the new SoCs supported in 3.16 (see SoC pull request)
   - Qualcomm APQ8064 and APQ8084 SoCs and eval boards
   - Nvidia Jetson TK1 development board (Tegra T124-based)

  Two new SoCs that didn't need enough new platform code to stand out
  enough for me to notice when writing the SoC tag, but that adds new DT
  contents are:

   - TI DRA72
   - Marvell Berlin 2Q"

* tag 'dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (500 commits)
  ARM: dts: add secure firmware support for exynos5420-arndale-octa
  ARM: dts: add pmu sysreg node to exynos3250
  ARM: dts: correct the usb phy node in exynos5800-peach-pi
  ARM: dts: correct the usb phy node in exynos5420-peach-pit
  ARM: dts: add dts files for exynos5410 and exynos5410-smdk5410
  ARM: dts: add dts files for exynos3250 SoC
  ARM: dts: add mfc node for exynos5800
  ARM: dts: add Vbus regulator for USB 3.0 on exynos5800-peach-pi
  ARM: dts: enable fimd for exynos5800-peach-pi
  ARM: dts: enable display controller for exynos5800-peach-pi
  ARM: dts: enable hdmi for exynos5800-peach-pi
  ARM: dts: add dts file for exynos5800-peach-pi board
  ARM: dts: add dts file for exynos5800 SoC
  ARM: dts: add dts file for exynos5260-xyref5260 board
  ARM: dts: add dts files for exynos5260 SoC
  ARM: dts: update watchdog node name in exynos5440
  ARM: dts: use key code macros on Origen and Arndale boards
  ARM: dts: enable RTC and WDT nodes on Origen boards
  ARM: dts: qcom: Add APQ8084-MTP board support
  ARM: dts: qcom: Add APQ8084 SoC support
  ...

Merge tag 'defconfig-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next

Pull ARM SoC defconfig updates from Olof Johansson:
 "A number of defconfig updates for 3.16.  We have quite a few of these
  as new SoCs and drivers get supported, and we've started collecting
  them in one shared branch.

  We started halfway through the merge window so there'll be some small
  conflicts with other branches on nearby changes, but nothing major.
  Next cycle should be smoother"

* tag 'defconfig-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: multi_v7_defconfig: Enable Exynos platform
  ARM: configs: update Allwinner options
  ARM: qcom: Enable GSBI driver in defconfig
  ARM: multi_v7_defconfig: Enable Zynq peripheral drivers
  ARM: at91/defconfig: sama5_defconfig: updated
  ARM: add drivers for Colibri T30 to multi_v7_defconfig
  ARM: configs: add CONFIG_MMC_SDHCI_PXAV3 to the multi_v7_defconfig
  ARM: configs: enable XHCI mvebu support in multi_v7_defconfig
  ARM: multi_v7: Add Allwinner reset drivers to multi_v7_defconfig
  ARM: sunxi: Add A31 reset driver to sunxi_defconfig
  ARM: config: Update msm_defconfig
  ARM: mvebu: enable MSI support in mvebu_v7_defconfig
  ARM: config: Add qcom_defconfig
  ARM: configs: enable XHCI mvebu support in mvebu_v7_defconfig

Pull ARM SoC board support updates from Olof Johansson:
 "The bulk of this branch is updates for Renesas Shmobile.  They are
  still doing some enablement for classic boards first, and then come up
  with DT bindings when they've had a chance to learn more about the
  hardware.  Not necessarily a bad way to go about it, and they're
  looking at moving some of the temporary board code resulting from it
  to drivers/staging instead to avoid the churn here.

  As a result of the shmobile clock cleanups, we end up merging quite a
  bit of SH code here as well.  We ended up merging it here instead of
  in the cleanup branch due to the other board changes depending on it"

* tag 'boards-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (130 commits)
  ARM: davinci: remove checks for CONFIG_USB_MUSB_PERIPHERAL
  ARM: add drivers for Colibri T30 to multi_v7_defconfig
  ARM: shmobile: Remove Genmai reference DTS
  ARM: shmobile: Let Genmai multiplatform boot with Genmai DTB
  ARM: shmobile: Sync Genmai DTS with Genmai reference DTS
  ARM: shmobile: genmai-reference: Remove legacy clock support
  ARM: shmobile: Remove non-multiplatform Genmai reference support
  ARM: configs: enable XHCI mvebu support in multi_v7_defconfig
  ARM: OMAP: replace checks for CONFIG_USB_GADGET_OMAP
  ARM: OMAP: AM3517EVM: remove check for CONFIG_PANEL_SHARP_LQ043T1DG01
  ARM: OMAP: SX1: remove check for CONFIG_SX1_OLD_FLASH
  ARM: OMAP: remove some dead code
  ARM: OMAP: omap3stalker: remove two Kconfig macros
  ARM: tegra: tegra_defconfig updates
  ARM: shmobile: r7s72100: use workaround for non DT-clocks
  ARM: shmobile: Add forward declaration of struct clk to silence warning
  ARM: shmobile: r7s72100: remove SPI DT clocks from legacy clock support
  ARM: shmobile: r7s72100: add spi clocks to dtsi
  ARM: shmobile: r7s72100: remove I2C DT clocks from legacy clock support
  ARM: shmobile: r7s72100: add i2c clocks to dtsi
  ...

Pull part one of ARM SoC updates from Olof Johansson:
 "A quite large set of SoC updates this cycle.  In no particular order:

   - Multi-cluster power management for Samsung Exynos, adding support
     for big.LITTLE CPU switching on EXYNOS5

   - SMP support for Marvell Armada 375 and 38x

   - SMP rework on Allwinner A31

   - Xilinx Zynq support for SOC_BUS, big endian

   - Marvell orion5x platform cleanup, modernizing the implementation
     and moving to DT.

   - _Finally_ moving Samsung Exynos over to support MULTIPLATFORM, so
     that their platform can be enabled in the same kernel binary as
     most of the other v7 platforms in the tree.  \o/

     The work isn't quite complete, there's some driver fixes still
     needed, but the basics now work.

  New SoC support added:

   - Freescale i.MX6SX

   - LSI Axxia AXM55xx SoCs

   - Samsung EXYNOS 3250, 5260, 5410, 5420 and 5800

   - STi STIH407

  plus a large set of various smaller updates for different platforms.
  I'm probably missing some important one here"

* tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (281 commits)
  ARM: exynos: don't run exynos4 l2x0 setup on other platforms
  ARM: exynos: Fix "allmodconfig" build errors in mcpm and hotplug
  ARM: EXYNOS: mcpm rename the power_down_finish
  ARM: EXYNOS: Enable mcpm for dual-cluster exynos5800 SoC
  ARM: EXYNOS: Enable multi-platform build support
  ARM: EXYNOS: Consolidate Kconfig entries
  ARM: EXYNOS: Add support for EXYNOS5410 SoC
  ARM: EXYNOS: Support secondary CPU boot of Exynos3250
  ARM: EXYNOS: Add Exynos3250 SoC ID
  ARM: EXYNOS: Add 5800 SoC support
  ARM: EXYNOS: initial board support for exynos5260 SoC
  clk: exynos5410: register clocks using common clock framework
  ARM: debug: qcom: add UART addresses to Kconfig help for APQ8084
  ARM: sunxi: allow building without reset controller
  Documentation: devicetree: arm: sort enable-method entries
  ARM: rockchip: convert smp bringup to CPU_METHOD_OF_DECLARE
  clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks
  ARM: dts: axxia: Add reset controller
  power: reset: Add Axxia system reset driver
  ARM: axxia: Adding defconfig for AXM55xx
  ...

Pull ARM SoC cleanups from Olof Johansson:
 "Cleanups for 3.16.  Among these are:

   - a bunch of misc cleanups for Broadcom platforms, mostly
     housekeeping
   - enabling Common Clock Framework on the older s3c24xx Samsung
     chipsets
   - cleanup of the Versatile Express system controller code, moving it
     to syscon
   - power management cleanups for OMAP platforms

  plus a handful of other cleanups across the place"

* tag 'cleanup-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (87 commits)
  ARM: kconfig: allow PCI support to be selected with ARCH_MULTIPLATFORM
  clk: samsung: fix build error
  ARM: vexpress: refine dependencies for new code
  clk: samsung: clk-s3c2410-dlck: do not use PNAME macro as it declares __initdata
  cpufreq: exynos: Fix the compile error
  ARM: S3C24XX: move debug-macro.S into the common space
  ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro
  ARM: S3C24XX: trim down debug uart handling
  ARM: compressed/head.S: remove s3c24xx special case
  ARM: EXYNOS: Remove unnecessary inclusion of cpu.h
  ARM: EXYNOS: Migrate Exynos specific macros from plat to mach
  ARM: EXYNOS: Remove exynos_subsys registration
  ARM: EXYNOS: Remove duplicate lines in Makefile
  ARM: EXYNOS: use v7_exit_coherency_flush macro for cache disabling
  ARM: OMAP4: PRCM: remove references to cm-regbits-44xx.h from PRCM core files
  ARM: OMAP3/4: PRM: add support of late_init call to prm_ll_ops
  ARM: OMAP3/OMAP4: PRM: add prm_features flags and add IO wakeup under it
  ARM: OMAP3/4: PRM: provide io chain reconfig function through irq setup
  ARM: OMAP2+: PRM: remove unnecessary cpu_is_XXX calls from prm_init / exit
  ARM: OMAP2+: PRCM: cleanup some header includes
  ...

Pull ARM SoC low-priority fixes from Olof Johansson:
 "A small selection of fixes coming in late during the release cycle and
  not being critical enough for 3.15 inclusion"

* tag 'fixes-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: shmobile: armadillo800eva: fixup HDMI sound flags setting
  ARM: msm: Silence readb/writeb warnings due to missing IOMEM()
  ARM: dts: am43xx: fix starting offset of NAND.filesystem MTD partition
  ARM: dts: am335x-boneblack: remove use of ti,vcc-aux-disable-is-sleep
  ARM: OMAP2+: free use_gptimer_clksrc variable after boot
  ARM: OMAP5: Redo THUMB mode switch on secondary CPU
  ARM: dts: AM4372: add l3-noc information
  ARM: dts: DRA7: Use dra7-l3-noc instead of omap4-l3-noc
  reset: Add of_reset_control_get to reset.h

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull block driver changes from Jens Axboe:
 "Now that the core bits are in, here's the pull request for the driver
  related changes for 3.16.  Nothing out of the ordinary here, mostly
  business as usual.  There are a few pulls of for-3.16/core into this
  branch, which were done when the blk-mq was modified after the
  mtip32xx conversion was put in.

  The pull request contains:

   - skd and cciss converted to use pci_enable_msix_exact().  From
     Alexander Gordeev.

   - A few mtip32xx fixes from Asai @ Micron.

   - The conversion of mtip32xx from make_request_fn to blk-mq, and a
     later small fix for that conversion on quiescing for non-queued IO.
     From me.

   - A fix for bsg to use an exported function to check whether this
     driver is request based or not.  Needed updating for blk-mq, which
     is request based, but does not have a request_fn hook.  From me.

   - Small floppy bug fix from Jiri.

   - A series of cleanups for the cdrom uniform layer from Joe Perches.
     Gets rid of various old ugly macros, making the code conform more
     to the modern coding style.

   - A series of patches for drbd from the drbd crew (Lars Ellenberg and
     Philipp Reisner).

   - A use-after-free fix for null_blk from Ming Lei.

   - Also from Ming Lei is a performance patch for virtio-blk, which can
     net us a 3x win on kvm platforms where world notification is
     expensive.

   - Ming Lei also fixed a stall issue in virtio-blk, due to a race
     between queue start/stop and resource limits.

   - A small batch of fixes for xen-blk{back,front} from Olaf Hering and
     Valentin Priescu"

* 'for-3.16/drivers' of git://git.kernel.dk/linux-block: (54 commits)
  block: virtio_blk: don't hold spin lock during world switch
  xen-blkback: defer freeing blkif to avoid blocking xenwatch
  xen blkif.h: fix comment typo in discard-alignment
  xen/blkback: disable discard feature if requested by toolstack
  xen-blkfront: remove type check from blkfront_setup_discard
  floppy: do not corrupt bio.bi_flags when reading block 0
  mtip32xx: move error handling to service thread
  virtio_blk: fix race between start and stop queue
  mtip32xx: stop block hardware queues before quiescing IO
  mtip32xx: blk_mq_init_queue() returns an ERR_PTR
  mtip32xx: convert to use blk-mq
  cdrom: Remove unnecessary prototype for cdrom_get_disc_info
  cdrom: Remove unnecessary prototype for cdrom_mrw_exit
  cdrom: Remove cdrom_count_tracks prototype
  cdrom: Remove cdrom_get_next_writeable prototype
  cdrom: Remove cdrom_get_last_written prototype
  cdrom: Move mmc_ioctls above cdrom_ioctl to remove unnecessary prototype
  cdrom: Remove unnecessary sanitize_format prototype
  cdrom: Remove unnecessary check_for_audio_disc prototype
  cdrom: Remove prototype for open_for_data
  ...

Merge tag 'pci-v3.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into next

Pull PCI changes from Bjorn Helgaas:
 "Enumeration
    - Notify driver before and after device reset (Keith Busch)
    - Use reset notification in NVMe (Keith Busch)

  NUMA
    - Warn if we have to guess host bridge node information (Myron Stowe)
    - Work around AMD Fam15h BIOSes that fail to provide _PXM (Suravee
      Suthikulpanit)
    - Clean up and mark early_root_info_init() as deprecated (Suravee
      Suthikulpanit)

  Driver binding
    - Add "driver_override" for force specific binding (Alex Williamson)
    - Fail "new_id" addition for devices we already know about (Bandan
      Das)

  Resource management
    - Support BAR sizes up to 8GB (Nikhil Rao, Alan Cox)
    - Don't move IORESOURCE_PCI_FIXED resources (Bjorn Helgaas)
    - Mark SBx00 HPET BAR as IORESOURCE_PCI_FIXED (Bjorn Helgaas)
    - Fail safely if we can't handle BARs larger than 4GB (Bjorn Helgaas)
    - Reject BAR above 4GB if dma_addr_t is too small (Bjorn Helgaas)
    - Don't convert BAR address to resource if dma_addr_t is too small
      (Bjorn Helgaas)
    - Don't set BAR to zero if dma_addr_t is too small (Bjorn Helgaas)
    - Don't print anything while decoding is disabled (Bjorn Helgaas)
    - Don't add disabled subtractive decode bus resources (Bjorn Helgaas)
    - Add resource allocation comments (Bjorn Helgaas)
    - Restrict 64-bit prefetchable bridge windows to 64-bit resources
      (Yinghai Lu)
    - Assign i82875p_edac PCI resources before adding device (Yinghai Lu)

  PCI device hotplug
    - Remove unnecessary "dev->bus" test (Bjorn Helgaas)
    - Use PCI_EXP_SLTCAP_PSN define (Bjorn Helgaas)
    - Fix rphahp endianess issues (Laurent Dufour)
    - Acknowledge spurious "cmd completed" event (Rajat Jain)
    - Allow hotplug service drivers to operate in polling mode (Rajat Jain)
    - Fix cpqphp possible NULL dereference (Rickard Strandqvist)

  MSI
    - Replace pci_enable_msi_block() by pci_enable_msi_exact()
      (Alexander Gordeev)
    - Replace pci_enable_msix() by pci_enable_msix_exact() (Alexander Gordeev)
    - Simplify populate_msi_sysfs() (Jan Beulich)

  Virtualization
    - Add Intel Patsburg (X79) root port ACS quirk (Alex Williamson)
    - Mark RTL8110SC INTx masking as broken (Alex Williamson)

  Generic host bridge driver
    - Add generic PCI host controller driver (Will Deacon)

  Freescale i.MX6
    - Use new clock names (Lucas Stach)
    - Drop old IRQ mapping (Lucas Stach)
    - Remove optional (and unused) IRQs (Lucas Stach)
    - Add support for MSI (Lucas Stach)
    - Fix imx6_add_pcie_port() section mismatch warning (Sachin Kamat)

  Renesas R-Car
    - Add gen2 device tree support (Ben Dooks)
    - Use new OF interrupt mapping when possible (Lucas Stach)
    - Add PCIe driver (Phil Edworthy)
    - Add PCIe MSI support (Phil Edworthy)
    - Add PCIe device tree bindings (Phil Edworthy)

  Samsung Exynos
    - Remove unnecessary OOM messages (Jingoo Han)
    - Fix add_pcie_port() section mismatch warning (Sachin Kamat)

  Synopsys DesignWare
    - Make MSI ISR shared IRQ aware (Lucas Stach)

  Miscellaneous
    - Check for broken config space aliasing (Alex Williamson)
    - Update email address (Ben Hutchings)
    - Fix Broadcom CNB20LE unintended sign extension (Bjorn Helgaas)
    - Fix incorrect vgaarb conditional in WARN_ON() (Bjorn Helgaas)
    - Remove unnecessary __ref annotations (Bjorn Helgaas)
    - Add arch/x86/kernel/quirks.c to MAINTAINERS PCI file patterns
      (Bjorn Helgaas)
    - Fix use of uninitialized MPS value (Bjorn Helgaas)
    - Tidy x86/gart messages (Bjorn Helgaas)
    - Fix return value from pci_user_{read,write}_config_*() (Gavin Shan)
    - Turn pcibios_penalize_isa_irq() into a weak function (Hanjun Guo)
    - Remove unused serial device IDs (Jean Delvare)
    - Use designated initialization in PCI_VDEVICE (Mark Rustad)
    - Fix powerpc NULL dereference in pci_root_buses traversal (Mike Qiu)
    - Configure MPS on ARM (Murali Karicheri)
    - Remove unnecessary includes of <linux/init.h> (Paul Gortmaker)
    - Move Open Firmware devspec attribute to PCI common code (Sebastian Ott)
    - Use pdev->dev.groups for attribute creation on s390 (Sebastian Ott)
    - Remove pcibios_add_platform_entries() (Sebastian Ott)
    - Add new ID for Intel GPU "spurious interrupt" quirk (Thomas Jarosch)
    - Rename pci_is_bridge() to pci_has_subordinate() (Yijing Wang)
    - Add and use new pci_is_bridge() interface (Yijing Wang)
    - Make pci_bus_add_device() void (Yijing Wang)

  DMA API
    - Clarify physical/bus address distinction in docs (Bjorn Helgaas)
    - Fix typos in docs (Emilio López)
    - Update dma_pool_create ()and dma_pool_alloc() descriptions (Gioh Kim)
    - Change dma_declare_coherent_memory() CPU address to phys_addr_t
      (Bjorn Helgaas)
    - Pass GAPSPCI_DMA_BASE CPU & bus address to dma_declare_coherent_memory()
      (Bjorn Helgaas)"

* tag 'pci-v3.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (92 commits)
  MAINTAINERS: Add generic PCI host controller driver
  PCI: generic: Add generic PCI host controller driver
  PCI: imx6: Add support for MSI
  PCI: designware: Make MSI ISR shared IRQ aware
  PCI: imx6: Remove optional (and unused) IRQs
  PCI: imx6: Drop old IRQ mapping
  PCI: imx6: Use new clock names
  i82875p_edac: Assign PCI resources before adding device
  ARM/PCI: Call pcie_bus_configure_settings() to set MPS
  PCI: imx6: Fix imx6_add_pcie_port() section mismatch warning
  PCI: Make pci_bus_add_device() void
  PCI: exynos: Fix add_pcie_port() section mismatch warning
  PCI: Introduce new device binding path using pci_dev.driver_override
  PCI: rcar: Add gen2 device tree support
  PCI: cpqphp: Fix possible null pointer dereference
  PCI: rcar: Add R-Car PCIe device tree bindings
  PCI: rcar: Add MSI support for PCIe
  PCI: rcar: Add Renesas R-Car PCIe driver
  PCI: Fix return value from pci_user_{read,write}_config_*()
  PCI: exynos: Remove unnecessary OOM messages
  ...

Pull block core updates from Jens Axboe:
 "It's a big(ish) round this time, lots of development effort has gone
  into blk-mq in the last 3 months.  Generally we're heading to where
  3.16 will be a feature complete and performant blk-mq.  scsi-mq is
  progressing nicely and will hopefully be in 3.17.  A nvme port is in
  progress, and the Micron pci-e flash driver, mtip32xx, is converted
  and will be sent in with the driver pull request for 3.16.

  This pull request contains:

   - Lots of prep and support patches for scsi-mq have been integrated.
     All from Christoph.

   - API and code cleanups for blk-mq from Christoph.

   - Lots of good corner case and error handling cleanup fixes for
     blk-mq from Ming Lei.

   - A flew of blk-mq updates from me:

     * Provide strict mappings so that the driver can rely on the CPU
       to queue mapping.  This enables optimizations in the driver.

     * Provided a bitmap tagging instead of percpu_ida, which never
       really worked well for blk-mq.  percpu_ida relies on the fact
       that we have a lot more tags available than we really need, it
       fails miserably for cases where we exhaust (or are close to
       exhausting) the tag space.

     * Provide sane support for shared tag maps, as utilized by scsi-mq

     * Various fixes for IO timeouts.

     * API cleanups, and lots of perf tweaks and optimizations.

   - Remove 'buffer' from struct request.  This is ancient code, from
     when requests were always virtually mapped.  Kill it, to reclaim
     some space in struct request.  From me.

   - Remove 'magic' from blk_plug.  Since we store these on the stack
     and since we've never caught any actual bugs with this, lets just
     get rid of it.  From me.

   - Only call part_in_flight() once for IO completion, as includes two
     atomic reads.  Hopefully we'll get a better implementation soon, as
     the part IO stats are now one of the more expensive parts of doing
     IO on blk-mq.  From me.

   - File migration of block code from {mm,fs}/ to block/.  This
     includes bio.c, bio-integrity.c, bounce.c, and ioprio.c.  From me,
     from a discussion on lkml.

  That should describe the meat of the pull request.  Also has various
  little fixes and cleanups from Dave Jones, Shaohua Li, Duan Jiong,
  Fengguang Wu, Fabian Frederick, Randy Dunlap, Robert Elliott, and Sam
  Bradshaw"

* 'for-3.16/core' of git://git.kernel.dk/linux-block: (100 commits)
  blk-mq: push IPI or local end_io decision to __blk_mq_complete_request()
  blk-mq: remember to start timeout handler for direct queue
  block: ensure that the timer is always added
  blk-mq: blk_mq_unregister_hctx() can be static
  blk-mq: make the sysfs mq/ layout reflect current mappings
  blk-mq: blk_mq_tag_to_rq should handle flush request
  block: remove dead code in scsi_ioctl:blk_verify_command
  blk-mq: request initialization optimizations
  block: add queue flag for disabling SG merging
  block: remove 'magic' from struct blk_plug
  blk-mq: remove alloc_hctx and free_hctx methods
  blk-mq: add file comments and update copyright notices
  blk-mq: remove blk_mq_alloc_request_pinned
  blk-mq: do not use blk_mq_alloc_request_pinned in blk_mq_map_request
  blk-mq: remove blk_mq_wait_for_tags
  blk-mq: initialize request in __blk_mq_alloc_request
  blk-mq: merge blk_mq_alloc_reserved_request into blk_mq_alloc_request
  blk-mq: add helper to insert requests from irq context
  blk-mq: remove stale comment for blk_mq_complete_request()
  blk-mq: allow non-softirq completions
  ...

Pull MMC update from Ulf Hansson:
 "These patches are mainly updates for the mmci driver and have been
  tested in linux-next.

  Some ARM SoC related patches are also included and those have been
  acked from the corresponding maintainers to go through my mmc tree.

  Updates for mmci driver:
   - Put the device into low power state at system suspend.
   - Convert to the common mmc DT parser.
   - Add missing DT bindings needed for ux500.

  Updates for ARM ux500|u300:
   - Convert to the common mmc DT bindings.
   - Remove redundant board file for mmci platform data"

* tag 'mmc-v3.16-1' of git://git.linaro.org/people/ulf.hansson/mmc: (22 commits)
  mmc: mmci: Enforce DMA configuration through DT
  mmc: mmci: Enforce max frequency configuration through DT
  mmc: mmci: Enforce mmc capabilities through DT
  mmc: mmci: Enforce DT for signal direction and feedback clock
  ARM: ux500: Remove redundant board file for mmci platform data
  ARM: ux500: Add a vmmc regulator through DT for the poped eMMC for href
  ARM: ux500: Add the mmc capabilities flags to DT
  mmc: mmci: Enable MMC_CAP_CMD23
  mmc: mmci: Mark the DT bindings for highspeed mode as deprecated
  ARM: u300: Convert to the common mmc DT bindings for highspeed mode
  ARM: nomadik: Convert to the common mmc DT bindings for highspeed mode
  ARM: ux500: Convert to the common mmc DT bindings for highspeed mode
  ARM: ux500: Add mmci signal directions and feeback clock in DT for href
  mmc: mmci: Use the common mmc DT parser
  mmc: mmci: Add DT bindings for feedback clock pin
  mmc: mmci: Add DT bindings for signal direction
  mmc: mmci: Update DT documentation
  mmc: mmci: Convert to devm functions
  mmc: mmci: Convert to the mmc gpio API
  mmc: mmci: Put the device into low power state at system suspend
  ...

Pull HSI (High Speed Syncronous Interface) changes from Sebastian Reichel:
 "Please pull the following changes for the HSI subsystem, which I have
  taken over from Carlos Chinea <carlos.chinea@nokia.com>.

  The below patches have been worked on in the linux-omap mailinglist
  for 10 months and are well tested in linux-next (have been in there
  for more than two weeks) without any problems arising.  Apart from
  that potential regressions are very limited, because the subsystem is
  not yet used by any platform in the mainline kernel.

   - Add some documentation for the HSI subsystem

   - Add Device Tree support for the HSI subsystem

   - Add OMAP3 SSI driver (SSI is a legacy variant of HSI)

   - Add Nokia N900 Modem driver (without speech support for now)"

* tag 'hsi-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: Introduce Nokia N900 modem driver
  HSI: Introduce driver for SSI Protocol
  Documentation: DT: omap-ssi binding documentation
  HSI: Introduce OMAP SSI driver
  HSI: Add common DT binding for HSI client devices
  HSI: export method to (un)register clients
  HSI: Add channel resource support to HSI clients
  HSI: method to unregister clients from an hsi port
  HSI: hsi-char: fix driver for multiport scenarios
  MAINTAINERS: update HSI entry
  Documentation: HSI: Add some general description for the HSI subsystem

Merge remote-tracking branches 'spi/topic/oom', 'spi/topic/pxa2xx', 'spi/topic/rspi' and 'spi/topic/sirf' into spi-next

Merge remote-tracking branches 'spi/topic/dw', 'spi/topic/fsl', 'spi/topic/fsl-espi' and 'spi/topic/id-const' into spi-next

Merge remote-tracking branches 'spi/topic/adi', 'spi/topic/atmel' and 'spi/topic/cadence' into spi-next

Merge remote-tracking branches 'regulator/topic/s5m8767', 'regulator/topic/stub', 'regulator/topic/tps65090', 'regulator/topic/tps65217' and 'regulator/topic/tps65218' into regulator-next

Merge remote-tracking branches 'regulator/topic/palmas', 'regulator/topic/pbias', 'regulator/topic/pfuze100', 'regulator/topic/s2mpa01' and 'regulator/topic/s2mps11' into regulator-next

Merge remote-tracking branches 'regulator/topic/fixed', 'regulator/topic/id-const', 'regulator/topic/ltc3589', 'regulator/topic/max8649' and 'regulator/topic/of' into regulator-next

Merge remote-tracking branches 'regulator/topic/arizona', 'regulator/topic/axp20' and 'regulator/topic/bcm590xx' into regulator-next