Before commit f1b65df5 ("IB/mlx5: Add support for active_width and
active_speed in RoCE"), the mlx5_ib driver set default active_width and
active_speed to IB_WIDTH_4X and IB_SPEED_QDR.

Now, the active_width and active_speed are zeros if the RoCE port
is in DOWN state. The speed string should be set to " SDR" instead of
a blank string when active_speed is zero.
Signed-off-by: NHonggang Li <honli@redhat.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Eliminate the WARN_ONs that create following two warnings when
registering an rxe device:

WARNING: CPU: 2 PID: 1005 at drivers/infiniband/core/device.c:449 ib_register_device+0x591/0x640 [ib_core]
CPU: 2 PID: 1005 Comm: run_tests Not tainted 4.15.0-rc4-dbg+ #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:ib_register_device+0x591/0x640 [ib_core]
Call Trace:
 rxe_register_device+0x3c6/0x470 [rdma_rxe]
 rxe_add+0x543/0x5e0 [rdma_rxe]
 rxe_net_add+0x37/0xb0 [rdma_rxe]
 rxe_param_set_add+0x5a/0x120 [rdma_rxe]
 param_attr_store+0x5e/0xc0
 module_attr_store+0x19/0x30
 sysfs_kf_write+0x3d/0x50
 kernfs_fop_write+0x116/0x1a0
 __vfs_write+0x23/0x120
 vfs_write+0xbe/0x1b0
 SyS_write+0x44/0xa0
 entry_SYSCALL_64_fastpath+0x23/0x9a

WARNING: CPU: 2 PID: 1005 at drivers/infiniband/core/sysfs.c:1279 ib_device_register_sysfs+0x11d/0x160 [ib_core]
CPU: 2 PID: 1005 Comm: run_tests Tainted: G        W        4.15.0-rc4-dbg+ #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:ib_device_register_sysfs+0x11d/0x160 [ib_core]
Call Trace:
 ib_register_device+0x3f7/0x640 [ib_core]
 rxe_register_device+0x3c6/0x470 [rdma_rxe]
 rxe_add+0x543/0x5e0 [rdma_rxe]
 rxe_net_add+0x37/0xb0 [rdma_rxe]
 rxe_param_set_add+0x5a/0x120 [rdma_rxe]
 param_attr_store+0x5e/0xc0
 module_attr_store+0x19/0x30
 sysfs_kf_write+0x3d/0x50
 kernfs_fop_write+0x116/0x1a0
 __vfs_write+0x23/0x120
 vfs_write+0xbe/0x1b0
 SyS_write+0x44/0xa0
 entry_SYSCALL_64_fastpath+0x23/0x9a

The code should accept either a parent pointer or a fully specified DMA
specification without producing warnings.

Fixes: 99db9494 ("IB/core: Remove ib_device.dma_device")
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: stable@vger.kernel.org # v4.11
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This patch fixes the case where 'lifespan' entry of the hw_counters
is not writable. Currently write callback is not exposed for for
the hw_counters sysfs operation. Due to this, modifying lifespan
value results into permission denied error in below example.

echo 10 > /sys/class/infiniband/mlx5_0/ports/1/hw_counters/lifespan
-bash: /sys/class/infiniband/mlx5_0/ports/1/hw_counters/lifespan:
Permission denied

This patch adds the hook to modify any attribute which implements
store() operation.

Fixes: b40f4757 ("IB/core: Make device counter infrastructure dynamic")
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

There is a need to forward FW version to user space
application through RDMA netlink. In order to make it safe, there
is need to declare nla_policy and limit the size of FW string.

The new define IB_FW_VERSION_NAME_MAX will limit the size of
FW version string. That define was chosen to be equal to
ETHTOOL_FWVERS_LEN, because many drivers anyway are limited
by that value indirectly.

The introduction of this define allows us to remove the string size
from get_fw_str function signature.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Add high data rate speed to the ib_port_speed enumeration.
Signed-off-by: NNoa Osherovich <noaos@mellanox.com>
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The kernel commit cited below restructured ib device management
so that the device kobject is initialized in ib_alloc_device.

As part of the restructuring, the kobject is now initialized in
procedure ib_alloc_device, and is later added to the device hierarchy
in the ib_register_device call stack, in procedure
ib_device_register_sysfs (which calls device_add).

However, in the ib_device_register_sysfs error flow, if an error
occurs following the call to device_add, the cleanup procedure
device_unregister is called. This call results in the device object
being deleted -- which results in various use-after-free crashes.

The correct cleanup call is device_del -- which undoes device_add
without deleting the device object.

The device object will then (correctly) be deleted in the
ib_register_device caller's error cleanup flow, when the caller invokes
ib_dealloc_device.

Fixes: 55aeed06 ("IB/core: Make ib_alloc_device init the kobject")
Cc: <stable@vger.kernel.org> # v4.2+
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Move the ib_device.dev.parent initialization code from
ib_device_register_sysfs() to ib_register_device(). Additionally,
allow HBA drivers to set ib_device.dev.parent without setting
ib_device.dma_device. This is the first step towards removing
ib_device.dma_device.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add the missing port_xmit_wait counter. This counter is displayed through
some tools like perfquery but is not available via sysfs.

For the PORT_PMA_ATTR macro the _counter field is set to zero
allowing us to specify the offset directly like with PORT_PMA_ATTR_EXT

See also the earlier work in 2008 by Vladimir Skolovsky

https://www.mail-archive.com/general@lists.openfabrics.org/msg20313.htmlSigned-off-by: NVladimir Sokolvsky <vlad@mellanox.com>
Signed-off-by: NChristoph Lameter <cl@linux.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Now that all the devices have stopped exporting their own sysfs
entry points we can have the core export this on their behalf.

Eventually this may be removed but this provides for backwards
compatibility.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

For dynamically allocated sysfs attributes there is a need to call
sysfs_attr_init in order to comply with lockdep, not calling it
will result in error complaining key is not in .data section.

Fixes: b40f4757 ("IB/core: Make device counter infrastructure dynamic")
Signed-off-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Between the initial and final versions of the function setup_hw_stats,
the order of variable initialization was changed.  However, the unwind
flow on error did not properly keep up with the flow changes.  Make
the unwind flow match a proper unwind of the allocation flow, then
remove no longer needed variable initializations.

Fixes: b40f4757 (IB/core: Make device counter infrastructure
dynamic)
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The new sysfs hw_counters code had an off by one in its array allocation
length.  Fix that and the comment along with it.
Reported-by: NMark Bloch <markb@mellanox.com>
Fixes: b40f4757 (IB/core: Make device counter infrastructure
dynamic)
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The current error handling in setup_hw_stats has a couple of issues.
It is possible to generate a null pointer deference on the
kfree of hsag->attrs[i] because two of the early error exit paths
jump to the kfree when hsags NULL and not allocated. Fix this by
moving the kfree on stats and jumping to that, avoiding the hsag
freeing.

Secondly, there is a memory leak of stats if the hsag allocation
fails; instead of returning, jump to the kfree on stats.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In practice, each RDMA device has a unique set of counters that the
hardware implements.  Having a central set of counters that they must
all adhere to is limiting and causes many useful counters to not be
available.

Therefore we create a dynamic counter registration infrastructure.

The driver must implement a stats structure allocation routine, in
which the driver must place the directory name it wants, a list of
names for all of the counters, an array of u64 counters themselves,
plus a few generic configuration options.

We then implement a core routine to create a sysfs file for each
of the named stats elements, and a core routine to retrieve the
stats when any of the sysfs attribute files are read.

To avoid excessive beating on the stats generation routine in the
drivers, the core code also caches the stats for a short period of
time so that someone attempting to read all of the stats in a
given device's directory will not result in a stats generation
call per file read.

Future work will attempt to standardize just the shared stats
elements, and possibly add a method to get the stats via netlink
in addition to sysfs.
Signed-off-by: NChristoph Lameter <cl@linux.com>
Signed-off-by: NMark Bloch <markb@mellanox.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>
[ Add caching, make structure names more informative, add i40iw support,
  other significant rewrites from the original patch ]

When checking specific attribute from a bit mask, need to use bitwise
AND and not logical AND, fixed that.

Fixes: 145d9c54 ('IB/core: Display extended counter set if
available')
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: NChristoph Lameter <cl@linux.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

_show_port_gid_attr performs a va_end on some unused va_list args.
Clean this up by removing the args completely.

Fixes: 470be516 ("IB/core: Add gid attributes to sysfs")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Port number is not part of ClassPortInfo attribute but is
still needed as a parameter when invoking process_mad.

To properly handle this attribute, port_num is added as a
parameter to get_counter_table and get_perf_mad was changed
not to store port_num in the attribute itself when it's
querying the ClassPortInfo attribute.

This handles issue pointed out by Matan Barak <matanb@dev.mellanox.co.il>

Fixes: 145d9c54 ('IB/core: Display extended counter set if available')
Signed-off-by: NHal Rosenstock <hal@mellanox.com>
Acked-by: NMatan Barak <matanb@mellanox.com>
Acked-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NChristoph Lameter <cl@linux.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Attributed ID was declared as an int while the value should really be big
endian 16.

Fixes: 35c4cbb1 ("IB/core: Create get_perf_mad function in sysfs.c")
Reported-by: NBart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NChristoph Lameter <cl@linux.com>
Reviewed-by: NHal Rosenstock <hal@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Check if the extended counters are available and if so
create the proper extended and additional counters.
Signed-off-by: NChristoph Lameter <cl@linux.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NHal Rosenstock <hal@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add the attr_id on port_table_attribute since we will have to add
a different port_table_attribute for the extended attribute soon.
Reviewed-by: NHal Rosenstock <hal@mellanox.com>
Signed-off-by: NChristoph Lameter <cl@linux.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Create a new function to retrieve performance management
data from the existing code in get_pma_counter().
Reviewed-by: NHal Rosenstock <hal@mellanox.com>
Signed-off-by: NChristoph Lameter <cl@linux.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch set adds attributes of net device and gid type to each GID
in the GID table. Users that use verbs directly need to specify
the GID index. Since the same GID could have different types or
associated net devices, users should have the ability to query the
associated GID attributes. Adding these attributes to sysfs.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Use the cached copy of the attributes present on the device, except for
the case of a query originating from user-space, where we have to invoke
the driver query_device entry, so they can fill in their udata.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Adding an ability to query the IB cache by a netdev and get the
attributes of a GID. These parameters are necessary in order to
successfully resolve the required GID (when the netdevice is known)
and get the Ethernet L2 attributes from a GID.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Reviewed-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This gets rid of the weird in-between state where struct ib_device
was allocated but the kobject didn't work.

Consequently ib_device_release is now guaranteed to be called in
all situations and we needn't duplicate its kfrees on error paths.
Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Persuant to Liran's comments on node_type on linux-rdma
mailing list:

In an effort to reform the RDMA core and ULPs to minimize use of
node_type in struct ib_device, an additional bit is added to
struct ib_device for is_switch (IB switch). This is needed
to be initialized by any IB switch device driver. This is a
NEW requirement on such device drivers which are all
"out of tree".

In addition, an ib_switch helper was added to ib_verbs.h
based on the is_switch device bit rather than node_type
(although those should be consistent).

The RDMA core (MAD, SMI, agent, sa_query, multicast, sysfs)
as well as (IPoIB and SRP) ULPs are updated where
appropriate to use this new helper. In some cases,
the helper is now used under the covers of using
rdma_[start end]_port rather than the open coding
previously used.
Reviewed-by: NSean Hefty <sean.hefty@intel.com>
Reviewed-By: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Tested-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NHal Rosenstock <hal@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In order to support alternate sized MADs (and variable sized MADs on OPA
devices) add in/out MAD size parameters to the process_mad core call.

In addition, add an out_mad_pkey_index to communicate the pkey index the driver
wishes the MAD stack to use when sending OPA MAD responses.

The out MAD size and the out MAD PKey index are required by the MAD
stack to generate responses on OPA devices.

Furthermore, the in and out MAD parameters are made generic by specifying them
as ib_mad_hdr rather than ib_mad.

Drivers are modified as needed and are protected by BUG_ON flags if the MAD
sizes passed to them is incorrect.
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

As of commit 5eb620c8 "IB/core: Add helpers for uncached GID and P_Key
searches"; pkey_tbl_len and gid_tbl_len are immutable data which are stored in
the ib_device.

The per port core capability flags to be added later are also immutable data to
be stored in the ib_device object.

In preparation for this create a structure for per port immutable data and
place the pkey and gid table lengths within this structure.

"get_port_immutable" is added as a mandatory device function to allow the
drivers to fill in this data.
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The ports kobject isn't being released during error flow in device
registration.  This patch refactors the ports kobject cleanup into a
single function called from both the error flow in device registration
and from the unregistration function.

A couple of attributes aren't being deleted (iw_stats_group, and
ib_class_attributes).  While this may be handled implicitly by the
destruction of their kobjects, it seems better to handle all the
attributes the same way.
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>

[ Make free_port_list_attributes() static.  - Roland ]
Signed-off-by: NRoland Dreier <roland@purestorage.com>

When encountering an error during the add_port function, adding a port
to sysfs, the port kobject is freed without being deleted from sysfs.

Instead of freeing it directly, the patch uses kobject_put to release
the kobject and delete it.
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The ib_core module will call kobject_get on the parent object of each
kobject it creates.  This is redundant since kobject_add does that
anyway.

As a side effect, this patch should fix leaking the ports kobject and
the device kobject during unregister flow, since the previous code
didn't seem to take into account the kobject_get calls on behalf of
the child kobjects.
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Add the complementary RDMA_NODE_USNIC_UDP for RDMA_TRANSPORT_USNIC_UDP.
Signed-off-by: NUpinder Malhi <umalhi@cisco.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

This patch adds new rdma node and new rdma transport, and supporting
code used by Cisco's low latency driver called usNIC.  usNIC uses its
own transport, distinct from IB and iWARP.
Signed-off-by: NUpinder Malhi <umalhi@cisco.com>
Signed-off-by: NJeff Squyres <jsquyres@cisco.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Calling dev_set_name with a single paramter causes it to be handled as a
format string.  Many callers are passing potentially dynamic string
content, so use "%s" in those cases to avoid any potential accidents,
including wrappers like device_create*() and bdi_register().
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix to return -ENOMEM in the add_port() error handling case instead of
0, as done elsewhere in this function.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Commit e9319b0c ("IB/core: Fix SDR rates in sysfs") changed our
sysfs rate attribute to return EINVAL to userspace if the underlying
device driver returns an invalid rate.  Apparently some drivers do this
when the link is down and some userspace pukes if it gets an error when
reading this attribute, so avoid a regression by not return an error to
match the old code.
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The kernel IB stack uses one enumeration for IB speed, which wasn't
explicitly specified in the verbs header file.  Add that enum, and use
it all over the code.

The IB speed/width notation is also used by iWARP and IBoE HW drivers,
which use the convention of rate = speed * width to advertise their
port link rate.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Commit 71eeba16 ("IB: Add new InfiniBand link speeds") introduced a bug 
where eg the rate for IB 4X SDR links iss displayed as "8.5 Gb/sec" 
instead of "10 Gb/sec" as it used to be.  Fix that.
Reported-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

They get it via module.h (via device.h) but we want to clean that up.
When we do, we'll get things like:

  CC [M]  drivers/infiniband/core/sysfs.o
  sysfs.c:361: error: 'S_IRUGO' undeclared here (not in a function)
  sysfs.c:654: error: 'S_IWUSR' undeclared here (not in a function)

so add in the stat header it is using explicitly in advance.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>