SCSI midlayer has moved hostt->eh_timed_out to transport template.  As
libata doesn't need full-blown transport support yet, implement
minimal transport for libata.  No transport class or whatsoever, just
empty transport template with ->eh_timed_out hook.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

sil24 softreset timeout was > 100ms (100 loops with msleep(1)), which
turned out to be too short for some devices (ASI ARAID99 2000).  This
patch converts sil24 softreset waiting loop to use proper timeout
condition and lengthen the timeout to ATA_TMOUT_BOOT secs and check
interval to 100ms.  Chisato Yamauchi discovered the problem and
supplied initial patch.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Cc: Chisato Yamauchi <cyamauch@plamo.linet.gr.jp>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

sata_sil24 softreset routine used to check sata_dev_present() after
SRST is complete in the hope that SRST may do some good even when
SStatus reports no device.  This is okay as long as SRST timeout is
short (> 100ms in the current code) but it seems that not all SATA
devices are happy with short SRST timeout.

This patch makes softreset exit early without performing actual SRST
if SStatus reports no device in preparation for lengthening SRST
timeout.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

mwdma_mask was not copied from port_info to probe_ent.  Fix it.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Add a new PCI ID for SiI 3124.  Reported by Silicon Image.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Cc: Carlos Pardo <Carlos.Pardo@siliconimage.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The previous dev->max_sectors patch made sht->max_sectors meaningless.
Kill all initializations of sht->max_sectors.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

cdb_len is per-device property.  Sharing cdb_len on ap results in
inaccurate configuration on revalidation and hotplugging.  This patch
makes cdb_len per-device.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Now that libata is smart enough to handle both soft and hard resets,
add hardreset method.  Note that sil24 hardreset doesn't supply
signature; still, the new reset mechanism can make good use of it.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Convert sata_sil24 ->phy_reset to new reset mechanism.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

->eng_timeout cannot be invoked with NULL qc anymore.  Add an
assertion in ata_scsi_error() and kill NULL qc handling from all
->eng_timeout callbacks.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Make all libata low level drivers use ata_scsi_timed_out().
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Implement ata_eh_qc_complete/retry() using scsi_eh_finish_cmd() and
scsi_eh_flush_done_q().  This removes all eh scsicmd finish hacks from
low level drivers.

This change was first suggested by Jeff Garzik.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Return AC_ERR_* mask from issue fuctions instead of 0/-1.  This
enables things like failing a qc with AC_ERR_HSM when the device
doesn't set DRDY when the qc is about to be issued.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Add detailed AC_ERR_* flags and use them.  Long-term goal is to
describe all errors with err_mask and tf combination (tf for failed
sector information, etc...).  After proper error diagnosis is
implemented, sense data should also be generated from err_mask instead
of directly from hardware tf registers as it is currently.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Reflect changes in SCSI midlayer and updated to use new
ordered request implementation
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJens Axboe <axboe@suse.de>

  - remove err_mask from the parameter list of the complete functions
  - move err_mask to ata_queued_cmd
  - initialize qc->err_mask when needed
  - for each function call to ata_qc_complete(), replace the err_mask parameter with qc->err_mask.
Signed-off-by: NAlbert Lee <albertcc@tw.ibm.com>

===============
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

sil24_error_intr logs all error interrupts.  ATAPI devices generates
many harmless errors which can be ignored and all serious ones are
reported via sense data by SCSI layer.  Don't log device errors from
ATAPI devices.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

This patch implements ATAPI support for sil24 and bumps driver version
to 0.23.
Signed-off-by: NTejun Heo <htejun@gmail.com>

--

Jeff, it has been converted to use ->dev_config as pointed out.
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

There seems to be no way to obtain device signature from sil24 after
SATA phy reset and SRST is needed anyway for later port multiplier
suppport.  This patch converts sil24_phy_reset to use SRST instaed.
Signed-off-by: NTejun Heo <htejun@gmail.com>

--

Jeff, I didn't remove the 10ms sleep just to be on the safe side.  I
think we can live with 10ms sleep on SRST.
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

When an error condition is raised by device via D2H FIS or SDB.  sil24
controller should be restarted by setting PORT_CS_INIT and waiting
until PORT_CS_RDY is asserted instead of resetting the controller.
This patch implements sil24_restart_controller for those cases.  This
patch also makes sure that PORT_CS_RDY is asserted on
sil24_reset_controller completion.
Signed-off-by: NTejun Heo <htejun@gmail.com>

--

Jeff, delay is reduced to 1us and cnt increased to 10k.  My sil3124
turns on PORT_CS_RDY on the second iteration even without any delay.
I think 10k * 1us should be more than enough.

I tried to convert both restart and reset to use msleep's with work
queue, but if we do that, host_set lock should be released after
initiating restart or reset, leading to race condition among
reset/restart, other interrupts and timeout.  Implementing
synchronization among those in low-level driver doesn't seem right.
Well, reduced timeout should work for the time being.

Thanks.
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Adds constants for ATAPI support to sata_sil24.  This patch is
originally from Jeff Garzik <jgarzik@pobox.com>.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

sil24_port_stop() is missing call to ata_pad_free() thus leaking pad
buffer when a port is stopped.  This patch adds it.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Use ata_pad_{alloc,free} in two drivers, to factor out common code.

Add ata_pad_{alloc,free} to two other drivers, which needed the padding
but had not been updated.

A few drivers were not following the standard meme of printing out
their driver name and version at module load time; this is fixed
as well.

The second argument to ata_qc_complete() was being used for two
purposes: communicate the ATA Status register to the completion
function, and indicate an error.  On legacy PCI IDE hardware, the latter
is often implicit in the former.  On more modern hardware, the driver
often completely emulated a Status register value, passing ATA_ERR as an
indication that something went wrong.

Now that previous code changes have eliminated the need to use drv_stat
arg to communicate the ATA Status register value, we can convert it to a
mask of possible error classes.

This will lead to more flexible error handling in the future.

We now depend on ->tf_read() to provide us with the contents
of the Error shadow register.

	trivial iomem annotations + missing memcpy_fromio() caught by
those
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

trivial iomem annotations + missing memcpy_fromio() caught by those
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Enforce access rules where appropriate.

If the compiler is smart enough, this may buy us an optimization or two
as a side effect.

This patch adds support for sil_3131 and sil_3531.  Both are
identical to 3124 except that they have only one port.  Bits 30 and 31
of ata_port_info->host_flags is used to encode available port numbers.
Version number is bumped to 0.22.

Edward Falk supplied all the necessary information and preliminary
patch.
Signed-off-by: NTejun Heo <htejun@gmail.com>

This patch removes unused NR_PORTS macro and adds termination entry
to sil24_pci_tbl.
Signed-off-by: NTejun Heo <htejun@gmail.com>

 Hello, guys.

 This patch implements ->tf_read callback for sil24.  It didn't use to
be necessary but new ata_gen_fixed_sense now makes use of ->tf_read
callback.  This patch is taken from Edward Falk's driver.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

03_sil24_add-tf-reading.patch

	This patch implements proper TF register reading back and
	caching and bumps up version to 0.22.  This is taken from
	Edward's driver.
Signed-off-by: NTejun Heo <htejun@gmail.com>

 sata_sil24.c |   50 +++++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 45 insertions(+), 5 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

02_sil24_remove-cmderr-clearing.patch

	CMDERR register doesn't need clearing.  This is from Edward's
	driver.
Signed-off-by: NTejun Heo <htejun@gmail.com>

 sata_sil24.c |    4 ----
 1 file changed, 4 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

01_sil24_ignore-non-error-exception-irqs.patch

	Do not error-finish commands for non-error exception irqs -
	just ignore them.  This is taken from Edward's driver.
Signed-off-by: NTejun Heo <htejun@gmail.com>

 sata_sil24.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

sil24 0.20 didn't use to perform (what seems to be) port multiplier
initialization and controller reset 0.10 driver does.  This makes some
sil24 controllers malfunction.  This patch adds PM initialization and
controller resetting to initilization and bumps version to 0.21.
Please refer to the following thread for more information.

http://marc.theaimsgroup.com/?l=linux-ide&m=112582819830324&w=2
http://marc.theaimsgroup.com/?l=linux-ide&m=112636045531060&w=2Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>