- 10 3月, 2010 1 次提交
-
-
由 Marcin Kościelnicki 提交于
This makes nouveau recognise and report more kinds of PGRAPH errors, as well as prevent GPU lockups resulting from some of them. Lots of guesswork was involved and some part of this is probably incorrect. Some potential-lockuop situations are handled by just resetting a whole PGRAPH subunit, which doesn't sound like a "proper" solution, but seems to work just fine... for now. Signed-off-by: NMarcin Kościelnicki <koriakin@0x04.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 25 2月, 2010 5 次提交
-
-
由 Marcin Kościelnicki 提交于
This removes dependence on external firmware for NV50 generation cards. If the generated ctxprogs don't work for you for some reason, please report it. Signed-off-by: NMarcin Kościelnicki <koriakin@0x04.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
This commit breaks the userspace interface, and requires a new libdrm for nouveau to operate again. The multiple GEM_PUSHBUF ioctls that were present in 0.0.15 for compatibility purposes are now gone, and replaced with the new ioctl which allows for multiple push buffers to be submitted (necessary for hw index buffers in the nv50 3d driver) and relocations to be applied on any buffer. A number of other ioctls (CARD_INIT, GEM_PIN, GEM_UNPIN) that were needed for userspace modesetting have also been removed. Signed-off-by: NBen Skeggs <bskeggs@redhat.com> Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Ben Skeggs 提交于
PFIFO on G80 and up has a new mode where the main ring buffer is simply a ring of pointers to indirect buffers containing the actual command/data packets. In order to be able to implement index buffers in the 3D driver we need to be able to submit data-only push buffers right after the cmd packet header, which is only possible using the new command submission method. This commit doesn't make it possible to implement index buffers yet, some userspace interface changes will be required, but it does allow for testing/debugging of the hardware-side support in the meantime. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Maarten Maathuis 提交于
The nv50 pgraph handler (for example) could reenable pgraph fifo access and that would be bad when pgraph context is being unloaded (we need the guarantee a ctxprog isn't running). Signed-off-by: NMaarten Maathuis <madman2003@gmail.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 23 2月, 2010 1 次提交
-
-
由 Ben Skeggs 提交于
This also modifies the unused PRAMIN PT entries to be all zeroes, can't really recall why I used 9/0 initially, just that it didn't work for some reason. It was likely masking a bug elsewhere that's since been fixed. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 09 2月, 2010 1 次提交
-
-
由 Marcin Kościelnicki 提交于
noaccel=1 disables all acceleration and doesn't even attempt initialising PGRAPH+PFIFO, nofbaccel=1 only makes fbcon unaccelerated. Signed-off-by: NMarcin Kościelnicki <koriakin@0x04.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 25 1月, 2010 1 次提交
-
-
由 Ben Skeggs 提交于
Also adds a module option to ignore the status reported via ACPI, in case we hit systems with broken ACPI. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 15 1月, 2010 1 次提交
-
-
由 Ben Skeggs 提交于
This is to prevent things such as GART tables and other important GPU structures being allocated there before we take over fbcon ourselves. This is more of a workaround for the moment, a better solution will require some more invasive changes, but it'll be done at some point. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 11 1月, 2010 7 次提交
-
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
It will be useful for various synchronization purposes, mostly stolen from "[PATCH] drm/nv50: synchronize user channel after buffer object move on kernel channel" by Maarten Maathuis. Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Francisco Jerez 提交于
This commit has also the following 3 bugfix commits squashed into it from the nouveau git tree: drm/nouveau: Fix up the tiling alignment restrictions for nv1x. drm/nouveau: Fix up the nv2x tiling alignment restrictions. drm/nv50: fix align typo for g9x Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
- 16 12月, 2009 2 次提交
-
-
由 Ben Skeggs 提交于
The context programs are *very* simple compared to the ones used by the binary driver. There's notes in nv40_grctx.c explaining most of the things we don't implement. If we discover if/why any of it is required further down the track, we'll handle it then. The PGRAPH state generated for each chipset should match what NVIDIA do almost exactly (there's a couple of exceptions). If someone has a lot of time on their hands, they could figure out the mapping of object/method to PGRAPH register and demagic the initial state a little, it's not terribly important however. At time of commit, confirmed to be working at least well enough for accelerated X (and where tested, for 3D apps) on NV40, NV43, NV44, NV46, NV49, NV4A, NV4B and NV4E. A module option has been added to force the use of external firmware blobs if it becomes required. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Maarten Maathuis 提交于
- Use driver level (0x2) for NV_DEBUG instead of all levels - Create a NV_DEBUG_KMS for KMS level (0x4) and use them in modesetting code - Remove a few odd NV_TRACE calls and replace some of them with NV_DEBUG_KMS or NV_INFO Signed-off-by: NMaarten Maathuis <madman2003@gmail.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 11 12月, 2009 1 次提交
-
-
由 Ben Skeggs 提交于
This adds a drm/kms staging non-API stable driver for GPUs from NVIDIA. This driver is a KMS-based driver and requires a compatible nouveau userspace libdrm and nouveau X.org driver. This driver requires firmware files not available in this kernel tree, interested parties can find them via the nouveau project git archive. This driver is reverse engineered, and is in no way supported by nVidia. Support for nearly the complete range of nvidia hw from nv04->g80 (nv50) is available, and the kms driver should support driving nearly all output types (displayport is under development still) along with supporting suspend/resume. This work is all from the upstream nouveau project found at nouveau.freedesktop.org. The original authors list from nouveau git tree is: Anssi Hannula <anssi.hannula@iki.fi> Ben Skeggs <bskeggs@redhat.com> Francisco Jerez <currojerez@riseup.net> Maarten Maathuis <madman2003@gmail.com> Marcin Kościelnicki <koriakin@0x04.net> Matthew Garrett <mjg@redhat.com> Matt Parnell <mparnell@gmail.com> Patrice Mandin <patmandin@gmail.com> Pekka Paalanen <pq@iki.fi> Xavier Chantry <shiningxc@gmail.com> along with project founder Stephane Marchesin <marchesin@icps.u-strasbg.fr> Signed-off-by: NBen Skeggs <bskeggs@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-