Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 09 8月, 2012 1 次提交
  3. 01 8月, 2012 2 次提交
    • M
      mm: allow PF_MEMALLOC from softirq context · 907aed48
      由 Mel Gorman 提交于 
      This is needed to allow network softirq packet processing to make use of
PF_MEMALLOC.

Currently softirq context cannot use PF_MEMALLOC due to it not being
associated with a task, and therefore not having task flags to fiddle with
- thus the gfp to alloc flag mapping ignores the task flags when in
interrupts (hard or soft) context.

Allowing softirqs to make use of PF_MEMALLOC therefore requires some
trickery.  This patch borrows the task flags from whatever process happens
to be preempted by the softirq.  It then modifies the gfp to alloc flags
mapping to not exclude task flags in softirq context, and modify the
softirq code to save, clear and restore the PF_MEMALLOC flag.

The save and clear, ensures the preempted task's PF_MEMALLOC flag doesn't
leak into the softirq.  The restore ensures a softirq's PF_MEMALLOC flag
cannot leak back into the preempted process.  This should be safe due to
the following reasons

Softirqs can run on multiple CPUs sure but the same task should not be
	executing the same softirq code. Neither should the softirq
	handler be preempted by any other softirq handler so the flags
	should not leak to an unrelated softirq.

Softirqs re-enable hardware interrupts in __do_softirq() so can be
	preempted by hardware interrupts so PF_MEMALLOC is inherited
	by the hard IRQ. However, this is similar to a process in
	reclaim being preempted by a hardirq. While PF_MEMALLOC is
	set, gfp_to_alloc_flags() distinguishes between hard and
	soft irqs and avoids giving a hardirq the ALLOC_NO_WATERMARKS
	flag.

If the softirq is deferred to ksoftirq then its flags may be used
        instead of a normal tasks but as the softirq cannot be preempted,
        the PF_MEMALLOC flag does not leak to other code by accident.

[davem@davemloft.net: Document why PF_MEMALLOC is safe]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: David Miller <davem@davemloft.net>
Cc: Neil Brown <neilb@suse.de>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      907aed48
    • A
      memcg: rename config variables · c255a458
      由 Andrew Morton 提交于 
      Sanity:

CONFIG_CGROUP_MEM_RES_CTLR -> CONFIG_MEMCG
CONFIG_CGROUP_MEM_RES_CTLR_SWAP -> CONFIG_MEMCG_SWAP
CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED -> CONFIG_MEMCG_SWAP_ENABLED
CONFIG_CGROUP_MEM_RES_CTLR_KMEM -> CONFIG_MEMCG_KMEM

[mhocko@suse.cz: fix missed bits]
Cc: Glauber Costa <glommer@parallels.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      c255a458
  5. 31 7月, 2012 2 次提交
    • S
      NMI watchdog: fix for lockup detector breakage on resume · 45226e94
      由 Sameer Nanda 提交于 
      On the suspend/resume path the boot CPU does not go though an
offline->online transition.  This breaks the NMI detector post-resume
since it depends on PMU state that is lost when the system gets
suspended.

Fix this by forcing a CPU offline->online transition for the lockup
detector on the boot CPU during resume.

To provide more context, we enable NMI watchdog on Chrome OS.  We have
seen several reports of systems freezing up completely which indicated
that the NMI watchdog was not firing for some reason.

Debugging further, we found a simple way of repro'ing system freezes --
issuing the command 'tasket 1 sh -c "echo nmilockup > /proc/breakme"'
after the system has been suspended/resumed one or more times.

With this patch in place, the system freeze result in panics, as
expected.

These panics provide a nice stack trace for us to debug the actual issue
causing the freeze.

[akpm@linux-foundation.org: fiddle with code comment]
[akpm@linux-foundation.org: make lockup_detector_bootcpu_resume() conditional on CONFIG_SUSPEND]
[akpm@linux-foundation.org: fix section errors]
Signed-off-by: NSameer Nanda <snanda@chromium.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Mandeep Singh Baines <msb@chromium.org>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      45226e94
    • K
      coredump: warn about unsafe suid_dumpable / core_pattern combo · 54b50199
      由 Kees Cook 提交于 
      When suid_dumpable=2, detect unsafe core_pattern settings and warn when
they are seen.
Signed-off-by: NKees Cook <keescook@chromium.org>
Suggested-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alan Cox <alan@linux.intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: James Morris <james.l.morris@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      54b50199
  7. 24 7月, 2012 2 次提交
  9. 23 7月, 2012 3 次提交
  11. 06 7月, 2012 1 次提交
  13. 03 7月, 2012 1 次提交
  15. 08 6月, 2012 1 次提交
  17. 06 6月, 2012 2 次提交
  19. 02 6月, 2012 3 次提交
  21. 30 5月, 2012 2 次提交
  23. 24 5月, 2012 3 次提交
    • O
      keys: kill task_struct->replacement_session_keyring · f23ca335
      由 Oleg Nesterov 提交于 
      Kill the no longer used task_struct->replacement_session_keyring, update
copy_creds() and exit_creds().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Alexander Gordeev <agordeev@redhat.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Smith <dsmith@redhat.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      f23ca335
    • O
      genirq: reimplement exit_irq_thread() hook via task_work_add() · 4d1d61a6
      由 Oleg Nesterov 提交于 
      exit_irq_thread() and task->irq_thread are needed to handle the unexpected
(and unlikely) exit of irq-thread.

We can use task_work instead and make this all private to
kernel/irq/manage.c, cleanup plus micro-optimization.

1. rename exit_irq_thread() to irq_thread_dtor(), make it
   static, and move it up before irq_thread().

2. change irq_thread() to do task_work_add(irq_thread_dtor)
   at the start and task_work_cancel() before return.

   tracehook_notify_resume() can never play with kthreads,
   only do_exit()->exit_task_work() can call the callback
   and this is what we want.

3. remove task_struct->irq_thread and the special hook
   in do_exit().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Alexander Gordeev <agordeev@redhat.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Smith <dsmith@redhat.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      4d1d61a6
    • O
      task_work_add: generic process-context callbacks · e73f8959
      由 Oleg Nesterov 提交于 
      Provide a simple mechanism that allows running code in the (nonatomic)
context of the arbitrary task.

The caller does task_work_add(task, task_work) and this task executes
task_work->func() either from do_notify_resume() or from do_exit().  The
callback can rely on PF_EXITING to detect the latter case.

"struct task_work" can be embedded in another struct, still it has "void
*data" to handle the most common/simple case.

This allows us to kill the ->replacement_session_keyring hack, and
potentially this can have more users.

Performance-wise, this adds 2 "unlikely(!hlist_empty())" checks into
tracehook_notify_resume() and do_exit().  But at the same time we can
remove the "replacement_session_keyring != NULL" checks from
arch/*/signal.c and exit_creds().

Note: task_work_add/task_work_run abuses ->pi_lock.  This is only because
this lock is already used by lookup_pi_state() to synchronize with
do_exit() setting PF_EXITING.  Fortunately the scope of this lock in
task_work.c is really tiny, and the code is unlikely anyway.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Alexander Gordeev <agordeev@redhat.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Smith <dsmith@redhat.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      e73f8959
  25. 17 5月, 2012 1 次提交
    • P
      sched: Remove stale power aware scheduling remnants and dysfunctional knobs · 8e7fbcbc
      由 Peter Zijlstra 提交于 
      It's been broken forever (i.e. it's not scheduling in a power
aware fashion), as reported by Suresh and others sending
patches, and nobody cares enough to fix it properly ...
so remove it to make space free for something better.

There's various problems with the code as it stands today, first
and foremost the user interface which is bound to topology
levels and has multiple values per level. This results in a
state explosion which the administrator or distro needs to
master and almost nobody does.

Furthermore large configuration state spaces aren't good, it
means the thing doesn't just work right because it's either
under so many impossibe to meet constraints, or even if
there's an achievable state workloads have to be aware of
it precisely and can never meet it for dynamic workloads.

So pushing this kind of decision to user-space was a bad idea
even with a single knob - it's exponentially worse with knobs
on every node of the topology.

There is a proposal to replace the user interface with a single
3 state knob:

 sched_balance_policy := { performance, power, auto }

where 'auto' would be the preferred default which looks at things
like Battery/AC mode and possible cpufreq state or whatever the hw
exposes to show us power use expectations - but there's been no
progress on it in the past many months.

Aside from that, the actual implementation of the various knobs
is known to be broken. There have been sporadic attempts at
fixing things but these always stop short of reaching a mergable
state.

Therefore this wholesale removal with the hopes of spurring
people who care to come forward once again and work on a
coherent replacement.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1326104915.2442.53.camel@twinsSigned-off-by: NIngo Molnar <mingo@kernel.org>
      8e7fbcbc
  27. 14 5月, 2012 1 次提交
    • P
      sched/fair: Revert sched-domain iteration breakage · 04f733b4
      由 Peter Zijlstra 提交于 
      Patches c22402a2 ("sched/fair: Let minimally loaded cpu balance the
group") and 0ce90475 ("sched/fair: Add some serialization to the
sched_domain load-balance walk") are horribly broken so revert them.

The problem is that while it sounds good to have the minimally loaded
cpu do the pulling of more load, the way we walk the domains there is
absolutely no guarantee this cpu will actually get to the domain. In
fact its very likely it wont. Therefore the higher up the tree we get,
the less likely it is we'll balance at all.

The first of mask always walks up, while sucky in that it accumulates
load on the first cpu and needs extra passes to spread it out at least
guarantees a cpu gets up that far and load-balancing happens at all.

Since its now always the first and idle cpus should always be able to
balance so they get a task as fast as possible we can also do away
with the added serialization.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-rpuhs5s56aiv1aw7khv9zkw6@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      04f733b4
  29. 09 5月, 2012 1 次提交
  31. 07 5月, 2012 1 次提交
  33. 03 5月, 2012 1 次提交
  35. 14 4月, 2012 2 次提交
  37. 08 4月, 2012 2 次提交
  39. 03 4月, 2012 1 次提交
  41. 29 3月, 2012 1 次提交
  43. 24 3月, 2012 1 次提交
    • L
      prctl: add PR_{SET,GET}_CHILD_SUBREAPER to allow simple process supervision · ebec18a6
      由 Lennart Poettering 提交于 
      Userspace service managers/supervisors need to track their started
services.  Many services daemonize by double-forking and get implicitly
re-parented to PID 1.  The service manager will no longer be able to
receive the SIGCHLD signals for them, and is no longer in charge of
reaping the children with wait().  All information about the children is
lost at the moment PID 1 cleans up the re-parented processes.

With this prctl, a service manager process can mark itself as a sort of
'sub-init', able to stay as the parent for all orphaned processes
created by the started services.  All SIGCHLD signals will be delivered
to the service manager.

Receiving SIGCHLD and doing wait() is in cases of a service-manager much
preferred over any possible asynchronous notification about specific
PIDs, because the service manager has full access to the child process
data in /proc and the PID can not be re-used until the wait(), the
service-manager itself is in charge of, has happened.

As a side effect, the relevant parent PID information does not get lost
by a double-fork, which results in a more elaborate process tree and
'ps' output:

before:
  # ps afx
  253 ?        Ss     0:00 /bin/dbus-daemon --system --nofork
  294 ?        Sl     0:00 /usr/libexec/polkit-1/polkitd
  328 ?        S      0:00 /usr/sbin/modem-manager
  608 ?        Sl     0:00 /usr/libexec/colord
  658 ?        Sl     0:00 /usr/libexec/upowerd
  819 ?        Sl     0:00 /usr/libexec/imsettings-daemon
  916 ?        Sl     0:00 /usr/libexec/udisks-daemon
  917 ?        S      0:00  \_ udisks-daemon: not polling any devices

after:
  # ps afx
  294 ?        Ss     0:00 /bin/dbus-daemon --system --nofork
  426 ?        Sl     0:00  \_ /usr/libexec/polkit-1/polkitd
  449 ?        S      0:00  \_ /usr/sbin/modem-manager
  635 ?        Sl     0:00  \_ /usr/libexec/colord
  705 ?        Sl     0:00  \_ /usr/libexec/upowerd
  959 ?        Sl     0:00  \_ /usr/libexec/udisks-daemon
  960 ?        S      0:00  |   \_ udisks-daemon: not polling any devices
  977 ?        Sl     0:00  \_ /usr/libexec/packagekitd

This prctl is orthogonal to PID namespaces.  PID namespaces are isolated
from each other, while a service management process usually requires the
services to live in the same namespace, to be able to talk to each
other.

Users of this will be the systemd per-user instance, which provides
init-like functionality for the user's login session and D-Bus, which
activates bus services on-demand.  Both need init-like capabilities to
be able to properly keep track of the services they start.

Many thanks to Oleg for several rounds of review and insights.

[akpm@linux-foundation.org: fix comment layout and spelling]
[akpm@linux-foundation.org: add lengthy code comment from Oleg]
Reviewed-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NLennart Poettering <lennart@poettering.net>
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Acked-by: NValdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ebec18a6
  45. 22 3月, 2012 1 次提交
    • M
      cpuset: mm: reduce large amounts of memory barrier related damage v3 · cc9a6c87
      由 Mel Gorman 提交于 
      Commit c0ff7453 ("cpuset,mm: fix no node to alloc memory when
changing cpuset's mems") wins a super prize for the largest number of
memory barriers entered into fast paths for one commit.

[get|put]_mems_allowed is incredibly heavy with pairs of full memory
barriers inserted into a number of hot paths.  This was detected while
investigating at large page allocator slowdown introduced some time
after 2.6.32.  The largest portion of this overhead was shown by
oprofile to be at an mfence introduced by this commit into the page
allocator hot path.

For extra style points, the commit introduced the use of yield() in an
implementation of what looks like a spinning mutex.

This patch replaces the full memory barriers on both read and write
sides with a sequence counter with just read barriers on the fast path
side.  This is much cheaper on some architectures, including x86.  The
main bulk of the patch is the retry logic if the nodemask changes in a
manner that can cause a false failure.

While updating the nodemask, a check is made to see if a false failure
is a risk.  If it is, the sequence number gets bumped and parallel
allocators will briefly stall while the nodemask update takes place.

In a page fault test microbenchmark, oprofile samples from
__alloc_pages_nodemask went from 4.53% of all samples to 1.15%.  The
actual results were

                             3.3.0-rc3          3.3.0-rc3
                             rc3-vanilla        nobarrier-v2r1
    Clients   1 UserTime       0.07 (  0.00%)   0.08 (-14.19%)
    Clients   2 UserTime       0.07 (  0.00%)   0.07 (  2.72%)
    Clients   4 UserTime       0.08 (  0.00%)   0.07 (  3.29%)
    Clients   1 SysTime        0.70 (  0.00%)   0.65 (  6.65%)
    Clients   2 SysTime        0.85 (  0.00%)   0.82 (  3.65%)
    Clients   4 SysTime        1.41 (  0.00%)   1.41 (  0.32%)
    Clients   1 WallTime       0.77 (  0.00%)   0.74 (  4.19%)
    Clients   2 WallTime       0.47 (  0.00%)   0.45 (  3.73%)
    Clients   4 WallTime       0.38 (  0.00%)   0.37 (  1.58%)
    Clients   1 Flt/sec/cpu  497620.28 (  0.00%) 520294.53 (  4.56%)
    Clients   2 Flt/sec/cpu  414639.05 (  0.00%) 429882.01 (  3.68%)
    Clients   4 Flt/sec/cpu  257959.16 (  0.00%) 258761.48 (  0.31%)
    Clients   1 Flt/sec      495161.39 (  0.00%) 517292.87 (  4.47%)
    Clients   2 Flt/sec      820325.95 (  0.00%) 850289.77 (  3.65%)
    Clients   4 Flt/sec      1020068.93 (  0.00%) 1022674.06 (  0.26%)
    MMTests Statistics: duration
    Sys Time Running Test (seconds)             135.68    132.17
    User+Sys Time Running Test (seconds)         164.2    160.13
    Total Elapsed Time (seconds)                123.46    120.87

The overall improvement is small but the System CPU time is much
improved and roughly in correlation to what oprofile reported (these
performance figures are without profiling so skew is expected).  The
actual number of page faults is noticeably improved.

For benchmarks like kernel builds, the overall benefit is marginal but
the system CPU time is slightly reduced.

To test the actual bug the commit fixed I opened two terminals.  The
first ran within a cpuset and continually ran a small program that
faulted 100M of anonymous data.  In a second window, the nodemask of the
cpuset was continually randomised in a loop.

Without the commit, the program would fail every so often (usually
within 10 seconds) and obviously with the commit everything worked fine.
With this patch applied, it also worked fine so the fix should be
functionally equivalent.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: Miao Xie <miaox@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      cc9a6c87
  47. 14 3月, 2012 1 次提交
    • S
      uprobes/core: Handle breakpoint and singlestep exceptions · 0326f5a9
      由 Srikar Dronamraju 提交于 
      Uprobes uses exception notifiers to get to know if a thread hit
a breakpoint or a singlestep exception.

When a thread hits a uprobe or is singlestepping post a uprobe
hit, the uprobe exception notifier sets its TIF_UPROBE bit,
which will then be checked on its return to userspace path
(do_notify_resume() ->uprobe_notify_resume()), where the
consumers handlers are run (in task context) based on the
defined filters.

Uprobe hits are thread specific and hence we need to maintain
information about if a task hit a uprobe, what uprobe was hit,
the slot where the original instruction was copied for xol so
that it can be singlestepped with appropriate fixups.

In some cases, special care is needed for instructions that are
executed out of line (xol). These are architecture specific
artefacts, such as handling RIP relative instructions on x86_64.

Since the instruction at which the uprobe was inserted is
executed out of line, architecture specific fixups are added so
that the thread continues normal execution in the presence of a
uprobe.

Postpone the signals until we execute the probed insn.
post_xol() path does a recalc_sigpending() before return to
user-mode, this ensures the signal can't be lost.

Uprobes relies on DIE_DEBUG notification to notify if a
singlestep is complete.

Adds x86 specific uprobe exception notifiers and appropriate
hooks needed to determine a uprobe hit and subsequent post
processing.

Add requisite x86 fixups for xol for uprobes. Specific cases
needing fixups include relative jumps (x86_64), calls, etc.

Where possible, we check and skip singlestepping the
breakpointed instructions. For now we skip single byte as well
as few multibyte nop instructions. However this can be extended
to other instructions too.

Credits to Oleg Nesterov for suggestions/patches related to
signal, breakpoint, singlestep handling code.
Signed-off-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com
[ Performed various cleanliness edits ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      0326f5a9
  49. 10 3月, 2012 1 次提交
  51. 06 3月, 2012 2 次提交