- 22 8月, 2012 6 次提交
-
-
由 Xiao Guangrong 提交于
We do too many things in hva_to_pfn, this patch reorganize the code, let it be better readable Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
This set of functions is only used to read data from host space, in the later patch, we will only get a readonly hva in gfn_to_hva_read, and the function name is a good hint to let gfn_to_hva_read to pair with kvm_read_hva()/kvm_read_hva_atomic() Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
It can instead of hva_to_pfn_atomic Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Quote Avi's comment: | KVM_MEMSLOT_INVALID is actually an internal symbol, not used by | userspace. Please move it to kvm_host.h. Also, we divide the memlsot->flags into two parts, the lower 16 bits are visible for userspace, the higher 16 bits are internally used in kvm Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Check flags when memslot is registered from userspace as Avi's suggestion Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Currently, we reexecute all unhandleable instructions if they do not access on the mmio, however, it can not work if host map the readonly memory to guest. If the instruction try to write this kind of memory, it will fault again when guest retry it, then we will goto a infinite loop: retry instruction -> write #PF -> emulation fail -> retry instruction -> ... Fix it by retrying the instruction only when it faults on the writable memory Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 16 8月, 2012 1 次提交
-
-
由 Florian Westphal 提交于
else, host continues to update stealtime after reboot, which can corrupt e.g. initramfs area. found when tracking down initramfs unpack error on initial reboot (with qemu-kvm -smp 2, no problem with single-core). Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 15 8月, 2012 1 次提交
-
-
由 Michael S. Tsirkin 提交于
We validate irq pin number when routing is setup, so code handling illegal irq # in pic and ioapic on each injection is never called. Drop it, replace with BUG_ON to catch out of bounds access bugs. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 14 8月, 2012 6 次提交
-
-
由 Avi Kivity 提交于
All processors that support VMX have that feature, and guests (Xen) depend on it. As we already implement it, advertize it to the guest. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Gleb Natapov 提交于
MSR_IA32_DEBUGCTLMSR is zeroed on VMEXIT. Restore it to the correct value. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Alexander Graf 提交于
Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NRaghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Raghavendra K T 提交于
Signed-off-by: NRaghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Raghavendra K T 提交于
Thanks Alex for KVM_HC_FEATURES inputs and Jan for VAPIC_POLL_IRQ, and Peter (HPA) for suggesting hypercall ABI addition. Signed-off-by: NRaghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
kvm_guest_time_update unconditionally clears hv_clock.flags field, so the notification never reaches the guest. Fix it by allowing PVCLOCK_GUEST_STOPPED to passthrough. Reviewed-by: NEric B Munson <emunson@mgebm.net> Reviewed-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 09 8月, 2012 1 次提交
-
-
由 Gleb Natapov 提交于
For apic_set_spiv() to track APIC SW state correctly it needs to see previous and next values of the spurious vector register, but currently memset() overwrite the old value before apic_set_spiv() get a chance to do tracking. Fix it by calling apic_set_spiv() before overwriting old value. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 07 8月, 2012 5 次提交
-
-
由 Gleb Natapov 提交于
Those functions are used during interrupt injection. When inlined they become nops on the fast path. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
Usually all vcpus have local apic pointer initialized, so the check may be completely skipped. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
Usually all APICs are SW enabled so the check can be optimized out. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
Usually all APICs are HW enabled so the check can be optimized out. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
CC: Jason Baron <jbaron@redhat.com> CC: Ingo Molnar <mingo@elte.hu> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NGleb Natapov <gleb@redhat.com> Acked-by: NJason Baron <jbaron@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 06 8月, 2012 16 次提交
-
-
由 Gleb Natapov 提交于
According to SDM apic is enabled on start up. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
Do not change apic_base directly. Use kvm_lapic_set_base() instead. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
kvm_get_apic_base() needlessly checks irqchip_in_kernel although it does the same no matter what result of the check is. kvm_set_apic_base() also checks for irqchip_in_kernel, but kvm_lapic_set_base() can handle this case. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Currently, we use the error code as error pfn to indicat the error condition, it is not straightforward and it will not work on PAE 32-bit cpu with huge memory, since the valid physical address can be at most 52 bits For the normal pfn, the highest 12 bits should be zero, so we can mask these bits to indicate the error. Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
After commit a2766325, the error page is replaced by the error code, it need not be released anymore [ The patch has been compiling tested for powerpc ] Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
After commit a2766325, the error pfn is replaced by the error code, it need not be released anymore [ The patch has been compiling tested for powerpc ] Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
It is used to eliminate the overload of function call and cleanup the code Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Remove it since it is not used anymore Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
These functions are exported and can not inline, move them to kvm_host.h to eliminate the overload of function call Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Then, remove get_bad_pfn Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Then, get_hwpoison_pfn and is_hwpoison_pfn can be removed Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
After that, the exported and un-inline function, get_fault_pfn, can be removed Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
There are two bugs: - the 'error page' is forgot to be released [ it is unneeded after commit a2766325, for backport, we still do kvm_release_pfn_clean for the error pfn ] - guest pages are always released regardless of the unmapped page (e,g, caused by hwpoison) Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Takuya Yoshikawa 提交于
Two reasons: - x86 can integrate rmap and rmap_pde and remove heuristics in __gfn_to_rmap(). - Some architectures do not need rmap. Since rmap is one of the most memory consuming stuff in KVM, ppc'd better restrict the allocation to Book3S HV. Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Acked-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Takuya Yoshikawa 提交于
This helps to make rmap architecture specific in a later patch. Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Takuya Yoshikawa 提交于
Instead, check npages consistently. This helps to make rmap architecture specific in a later patch. Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 05 8月, 2012 1 次提交
-
-
由 Avi Kivity 提交于
- bring back critical fixes (esp. aa67f609) - provide an updated base for development * upstream: (4334 commits) missed mnt_drop_write() in do_dentry_open() UBIFS: nuke pdflush from comments gfs2: nuke pdflush from comments drbd: nuke pdflush from comments nilfs2: nuke write_super from comments hfs: nuke write_super from comments vfs: nuke pdflush from comments jbd/jbd2: nuke write_super from comments btrfs: nuke pdflush from comments btrfs: nuke write_super from comments ext4: nuke pdflush from comments ext4: nuke write_super from comments ext3: nuke write_super from comments Documentation: fix the VM knobs descritpion WRT pdflush Documentation: get rid of write_super vfs: kill write_super and sync_supers ACPI processor: Fix tick_broadcast_mask online/offline regression ACPI: Only count valid srat memory structures ACPI: Untangle a return statement for better readability Linux 3.6-rc1 ... Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 04 8月, 2012 3 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull VFS fixes and cleanups from Al Viro. Most of this is the series to remove sync_supers() and the ->write_supers VFS callback from Artem Bityutskiy. One commit to do the actual removal work, a whole series of commits to fix up stale comments etc all over the tree. There's also a regression fix for an incorrect use of mnt_drop_write() in do_dentry_open(). * 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: missed mnt_drop_write() in do_dentry_open() UBIFS: nuke pdflush from comments gfs2: nuke pdflush from comments drbd: nuke pdflush from comments nilfs2: nuke write_super from comments hfs: nuke write_super from comments vfs: nuke pdflush from comments jbd/jbd2: nuke write_super from comments btrfs: nuke pdflush from comments btrfs: nuke write_super from comments ext4: nuke pdflush from comments ext4: nuke write_super from comments ext3: nuke write_super from comments Documentation: fix the VM knobs descritpion WRT pdflush Documentation: get rid of write_super vfs: kill write_super and sync_supers
-
由 Al Viro 提交于
This one ought to be __mnt_drop_write(), to match __mnt_want_write() in the beginning... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Artem Bityutskiy 提交于
The pdflush thread is long gone, so this patch removes references to pdflush from UBIFS comments. Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-