- 27 5月, 2008 9 次提交
-
-
由 Kailang Yang 提交于
Show more exact codec chip name in the PCM stream name strings. Signed-off-by: NKailang Yang <kailang@realtek.com.tw> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kailang Yang 提交于
Signed-off-by: NKailang Yang <kailang@realtek.com.tw> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kailang Yang 提交于
Added the support of ALC663 codec, including specific models for ASUS M51VA, ASUS G71V, ASUS H13 and ASUS G50V. Signed-off-by: NKailang Yang <kailang@realtek.com.tw> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kailang Yang 提交于
Added the missing PCI ID for ICH9 controller (8086:2911) Signed-off-by: NKailang Yang <kailang@realtek.com.tw> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kailang Yang 提交于
Add the new PCI ID 0x6549 0x1200 Teradici controller. Signed-off-by: NKailang Yang <kailang@realtek.com.tw> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Replace CONFIG_SND_DEBUG_DETECT with CONFIG_SND_DEBUG_VERBOSE to represent its meaning more better. This config isn't provided only for the detection but for more verbose debug prints in general. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The kconfig items related with AC97-powersave must be outside the CONFIG_SND_PCI range. And it'd be better together with CONFIG_SND_AC97. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Convert menu in sound Kconfig files to menuconfig and if. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Bunk 提交于
This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 20 5月, 2008 1 次提交
-
-
由 Clemens Ladisch 提交于
The VT1724 MIDI port is not MPU-401 compatible; remove the hacks that try to make the MPU-401 library work with it, and just use some simple device-specific code. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Tested-by: NPavel Hofman <pavel.hofman@insite.cz>
-
- 19 5月, 2008 12 次提交
-
-
由 Takashi Iwai 提交于
Many HD-audio controllers seem inaccurate about the IRQ timing of PCM period updates. This has caused problems on audio quality; e.g. JACK doesn't work with two periods. This patch fixes the problem by checking the current DMA position at IRQ handler and delays the period-update via a workq if it's inaccurate. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Andreas Mohr 提交于
- figured out 'Digital(ly) Enhanced Game Port' functionality, implemented support for it (eliminating gameport polling overhead) - removed optional joystick activation, gameport now enabled unconditionally, since we now support it via the PCI I/O space, not via conflict-prone legacy I/O (which I was thus able to DISABLE now)! - fix playback bug (a muted wave output would get unmuted upon start of playback, of course this is not what we want, thus remember mute state) - implement partial power management: when idle, lower clock rate and disable codec (reduced noise!), and disable gameport circuit when unused - instantiate OPL3 timer, too - much better implementation of snd_azf3328_mixer_write_volume_gradually() - slightly optimized interrupt handling - lots of cleanup This time, I also found a way to verify proper OPL3 operation via MIDI file playback (emulation via synth hardware). Signed-off-by: NAndreas Mohr <andi@lisas.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Clemens Ladisch 提交于
Add a constraint for the period time so that there are less than ten seconds between interrupts so that ALSA does not assume that the device is dead. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Clemens Ladisch 提交于
Introduce symbols for the buffer/period size constraints so that their limits and relationships become clearer. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Clemens Ladisch 提交于
Add suspend/resume support. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Clemens Ladisch 提交于
Move the setting of the output enable GPIO bit to a separate function. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Clemens Ladisch 提交于
Create separate functions for the code that initializes the hardware, as opposed to initializing internal driver state, so that they can be reused for resume support. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Clemens Ladisch 提交于
When initializing the DAC volume registers, we can just use the generic volume update functions instead of setting the registers manually. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Clemens Ladisch 提交于
Save the written values of all CMI8788 and AC97 registers and of some of the DAC/ADC registers so that it is possible to restore the register state later. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Clemens Ladisch 提交于
Remove another magic number - add a symbol for the size of the PCI I/O range. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Clemens Ladisch 提交于
Adjust the MODULE_LICENSE strings to properly reflect the actual license. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Daniel Jacobowitz 提交于
Enable VMASTER for VT1616 / VT1617A codec. Signed-off-by: NDaniel Jacobowitz <dan@codesourcery.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 23 6月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
The irq handler may be called before the proper initialization of hardware. Call snd_aw2_saa7146_setup() before the irq handler registration. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 16 6月, 2008 1 次提交
-
-
由 Clemens Ladisch 提交于
Check that model->control_filter is set before trying to call it. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 09 6月, 2008 1 次提交
-
-
由 Akio Idehara 提交于
I think that hda_verb array must have "terminator (empty array)". But alc262_sony_unsol[] does not have it. And it causes gcc-4.3's buggy behavior with snd_hda_sequence_write(). Signed-off-by: NAkio Idehara <zbe64533@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 06 6月, 2008 1 次提交
-
-
由 Jaroslav Franek 提交于
When the Linux kernel is compiled with CONFIG_DEBUG_SHIRQ=y, the Soundblaster Audigy2 ZS Notebook PCMCIA card causes the system hang during boot (udev stage) or when the card is hot-plug. The CONFIG_DEBUG_SHIRQ flag is by default 'y' with all Fedora kernels since 2.6.23. The problem was reported as https://bugzilla.redhat.com/show_bug.cgi?id=326411 The issue was hunted down to the snd_emu10k1_create() routine: /* pseudo-code */ snd_emu10k1_create(...) { ... request_irq(... IRQF_SHARED ...) { register the irq handler #ifdef CONFIG_DEBUG_SHIRQ call the irq handler: snd_emu10k1_interrupt() { poll I/O port // <---- !! system hangs ... } #endif } ... snd_emu10k1_cardbus_init(...) { initialize I/O ports } ... } The early access to I/O port in the interrupt handler causes the freeze. Obviously it is necessary to init the I/O ports before accessing them. This patch moves the registration of the irq handler after the initialization of the I/O ports. Signed-off-by: NJaroslav Franek <jarin.franek@post.cz> Acked-by: NJames Courtier-Dutton <James@superbug.co.uk> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 6月, 2008 1 次提交
-
-
由 Tony Vroon 提交于
Use quirk table to assign ALC268_TOSHIBA to COMPAL IFL90/JFL-92 laptops. No analog output on autoprobe. Signed-off-by: NTony Vroon <tony@linx.net> Tested-by: NGuri <gurashka@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 6月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
The auto-config mode of Realtek ALC codecs has a bug since 2.6.25 that it cannot resume properly. The problem was the wrong assignment of init_hook that overrides the whole initialization. Relevant bug reports: http://bugzilla.kernel.org/show_bug.cgi?id=10662 https://bugzilla.novell.com/show_bug.cgi?id=385473Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 30 5月, 2008 3 次提交
-
-
由 Takashi Iwai 提交于
Set the proper model for LG LS75 with CM9880 codec. See ALSA bug#2105: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2105Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The mic pins are wrongly assigned on AD1884A mobile model. The mic handling is fixed for the automatic mic selection, too. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
ASUS A9T laptop uses line-out pin as the real front-output while other devices use it as the surround. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 26 5月, 2008 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Fix capture mute widget for STAC9250/9251 codecs. The widget 0x09 has no mute but 0x14 does actually. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 25 5月, 2008 4 次提交
-
-
由 Travis Place 提交于
Added IDs for the Foxconn P35AX-S mainboard to patch_realtek.c, so that ALC883_6ST_DIG is used by default. Signed-off-by: NTravis Place <wishie@wishie.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Fix the missing COEF and EAPD initialization in ALC889 auto-configuration mode. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
We get quite noisy output on the right channel on VT1708 codec when 24bit samples are used. Suppress the 24bit support until any real fix is found. https://bugzilla.novell.com/show_bug.cgi?id=390473Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Travis Place 提交于
Added a config table entry for the ASUS P5K-E/WIFI-AP mainboard (ID 1043:8227) to use AD1988_6STACK_DIG Signed-off-by: NTravis Place <wishie@wishie.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 20 5月, 2008 2 次提交
-
-
由 Travis Place 提交于
Corrected the model assignment for the ASUS P5GD1 w/SPDIF after reports of surround sound not being possible. Signed-off-by: NTravis Place <wishie@wishie.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Fixed the speaker auto-mute with two laptop and docking headphones. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Acked-by: NTony Vroon <tony@linx.net>
-
- 05 5月, 2008 2 次提交
-
-
由 Takashi Iwai 提交于
On boards with VT1617A codec, the sound disappears suddenly. This looks like a problem with HPE-bit control that is supposed to be set in patch_vt1617a(). However, on such problematic hardwares, the bit is actually reset mysteriously. The patch adds a workaround for the wrong quirk. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jacek Luczak 提交于
Change done by: commit f6c7e546 [ALSA] hda-codec - Fix auto-configuration of Realtek codecs broke sound on ALC861 Analog. Signed-off-by: NJacek Luczak <luczak.jacek@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-