Get rid of the defined but not used warnings
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>

Now that the APIC bringup is consolidated we can move the setup call
for the percpu clock event device to apic_bsp_setup().
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211704.162567839@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Extend apic_bsp_setup() so the same code flow can be used for
APIC_init_uniprocessor().

Folded Jiangs fix to provide proper ordering of the UP setup.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211704.084765674@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

The UP related setups for local apic are mangled into smp_sanity_check().

That results in duplicate calls to disable_smp() and makes the code
hard to follow. Let smp_sanity_check() return dedicated values for the
various exit reasons and handle them at the call site.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NBorislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211703.987833932@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

We better provide proper functions which implement the required code
flow in the apic code rather than letting the smpboot code open code
it. That allows to make more functions static and confines the APIC
functionality to apic.c where it belongs.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NBorislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211703.907616730@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

The UP local API support can be set up from an early initcall. No need
for horrible hackery in the init code.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211703.827943883@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Move the code to a different place so we can make other functions
inline. Preparatory patch for further cleanups. No change.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NBorislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211703.731329006@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

smpboot is very creative with the ways to disable ioapic.

smpboot_clear_io_apic() smpboot_clear_io_apic_irqs() and
disable_ioapic_support() serve a similar purpose.

smpboot_clear_io_apic_irqs() is the most useless of all
functions as it clears a variable which has not been setup yet.

Aside of that it has the same ifdef mess and conditionals around the
ioapic related code, which can now be removed.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NBorislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211703.650280684@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

We have proper stubs for the IOAPIC=n case and the setup/enable
function have the required checks inside now. Remove the ifdeffery and
the copy&pasted conditionals.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>C
Acked-by: NBorislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211703.569830549@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

No point to have the same checks at every call site. Add them to the
functions, so they can be called unconditionally.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NBorislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211703.490719938@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

To avoid lots of ifdeffery provide proper stubs for setup_IO_APIC(),
enable_IO_APIC() and setup_ioapic_dest().
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NBorislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211703.397170414@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

No point for a separate header file.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211703.304126687@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Use the state information to simplify the disable logic further.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NBorislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211703.209387598@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

enable_x2apic() is a convoluted unreadable mess because it is used for
both enablement in early boot and for setup in cpu_init().

Split the code into x2apic_enable() for enablement and x2apic_setup()
for setup of (secondary cpus). Make use of the new state tracking to
simplify the logic.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211703.129287153@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

There is no point in postponing the hardware disablement of x2apic. It
can be disabled right away in the nox2apic setup function.

Disable it right away and set the state to DISABLED . This allows to
remove all the nox2apic conditionals all over the place.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211703.051214090@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Having 3 different variables to track the state is just silly and
error prone. Add a proper state tracking variable which covers the
three possible states: ON/OFF/DISABLED.

We cannot use x2apic_mode for this as this would require to change all
users of x2apic_mode with explicit comparisons for a state value
instead of treating it as boolean.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NBorislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211702.955392443@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Rename the argument of try_to_enable_x2apic() so the purpose becomes
more clear.

Make the pr_warning more consistent and avoid the double print of
"disabling".
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NBorislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211702.876012628@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

No point in having try_to_enable_x2apic() outside of the
CONFIG_X86_X2APIC section and having inline functions and more ifdefs
to deal with it. Move the code into the existing ifdef section and
remove the inline cruft.

Fixup the printk about not enabling interrupt remapping as suggested
by Boris.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211702.795388613@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

No point in delaying the x2apic detection for the CONFIG_X86_X2APIC=n
case to enable_IR_x2apic(). We rather detect that before we try to
setup anything there.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211702.702479404@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

If x2apic_preenabled is not enabled, then disable_x2apic() is not
called from various places which results in x2apic_disabled not being
set. So other code pathes can happily reenable the x2apic.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211702.621431109@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

The x2apic_preenabled flag is just a horrible hack and if X2APIC
support is disabled it does not reflect the actual hardware
state. Check the hardware instead.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211702.541280622@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Having several disjunct pieces of code for x2apic support makes
reading the code unnecessarily hard. Move it to one ifdeffed section.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NBorislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211702.445212133@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

No point in having a static variable around which is always 0. Let the
compiler optimize code out if disabled.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NBorislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211702.363274310@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

enable_IR_x2apic() grew a open coded x2apic detection. Implement a
proper helper function which shares the code with the already existing
x2apic_enabled().

Made it use rdmsrl_safe as suggested by Boris.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211702.285038186@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Refine code by normailizing the way to detect whether IR is enabled.
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Tested-by: NJoerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/1420615903-28253-17-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Change variable disable_irq_remap to be static and simplify the code.
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Tested-by: NJoerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/1420615903-28253-16-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Assign intel_irq_remap_ops to remap_ops only if
intel_irq_remap_ops.prepare() succeeds.
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Tested-by: NJoerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/1420615903-28253-15-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Simplify irq_remapping code by killing irq_remapping_supported() and
related interfaces.

Joerg posted a similar patch at https://lkml.org/lkml/2014/12/15/490,
so assume an signed-off from Joerg.
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Tested-by: NJoerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Rientjes <rientjes@google.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oren Twaig <oren@scalemp.com>
Link: http://lkml.kernel.org/r/1420615903-28253-14-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

This allows to get rid of the irq_remapping_supported() function and
all its call-backs into the Intel and AMD IOMMU drivers.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Tested-by: NJoerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/1420615903-28253-13-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

When interrupt remapping hardware is not in X2APIC, CPU X2APIC mode
will be disabled if:
1) Maximum CPU APIC ID is bigger than 255
2) hypervisior doesn't support x2apic mode.

But we should only check whether hypervisor supports X2APIC mode when
hypervisor(CONFIG_HYPERVISOR_GUEST) is enabled, otherwise X2APIC will
always be disabled when CONFIG_HYPERVISOR_GUEST is disabled and IR
doesn't work in X2APIC mode.
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Tested-by: NJoerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Rientjes <rientjes@google.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oren Twaig <oren@scalemp.com>
Link: http://lkml.kernel.org/r/1420615903-28253-12-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Currently if CPU supports X2APIC, IR hardware must work in X2APIC mode
or disabled. Change the code to support IR working in XAPIC mode when
CPU supports X2APIC. Then the CPU APIC driver will decide how to handle
such as configuration by:
1) Disabling X2APIC mode
2) Forcing X2APIC physical mode

This change also fixes a live locking when
1) BIOS enables CPU X2APIC
2) DMAR table disables X2APIC mode or IR hardware doesn't support X2APIC
with following messages:
[   37.863463] dmar: INTR-REMAP: Request device [[f0:1f.7] fault index 2
[   37.863463] INTR-REMAP:[fault reason 36] Detected reserved fields in the IRTE entry
[   37.879372] dmar: INTR-REMAP: Request device [[f0:1f.7] fault index 2
[   37.879372] INTR-REMAP:[fault reason 36] Detected reserved fields in the IRTE entry
[   37.895282] dmar: INTR-REMAP: Request device [[f0:1f.7] fault index 2
[   37.895282] INTR-REMAP:[fault reason 36] Detected reserved fields in the IRTE entry
[   37.911192] dmar: INTR-REMAP: Request device [[f0:1f.7] fault index 2
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Tested-by: NJoerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/1420615903-28253-11-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

IRQ remapping is only supported when all IOMMUs in the
system support it. So check if all IOMMUs in the system
support IRQ remapping before doing the allocations.

[Jiang]
1) Rebased to v3.19.
2) Remove redundant check of ecap_ir_support(iommu->ecap) in function
   intel_enable_irq_remapping().
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Tested-by: NJoerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/1420615903-28253-10-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Prepare for killing function irq_remapping_supported() by moving code
from intel_irq_remapping_supported() into intel_prepare_irq_remapping().

Combined with patch from Joerg at https://lkml.org/lkml/2014/12/15/487,
so assume an signed-off from Joerg.
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Tested-by: NJoerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/1420615903-28253-9-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

If remapping is in XAPIC mode, the setup code just skips X2APIC
initialization without checking max CPU APIC ID in system, which may
cause problem if system has a CPU with APIC ID bigger than 255.

Handle IR in XAPIC mode the same way as if remapping is disabled.

[ tglx: Split out from previous patch ]
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Rientjes <rientjes@google.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oren Twaig <oren@scalemp.com>
Link: http://lkml.kernel.org/r/1420615903-28253-8-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Refine enable_IR_x2apic() and related functions for better readability.

[ tglx: Removed the XAPIC mode change and split it out into a seperate
  	patch. Added comments. ]
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Rientjes <rientjes@google.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oren Twaig <oren@scalemp.com>
Link: http://lkml.kernel.org/r/1420615903-28253-8-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

X2APIC will be disabled if user specifies "nox2apic" on kernel command
line, even when x2apic_preenabled is true. So correctly detect X2APIC
status by using x2apic_enabled() instead of x2apic_preenabled.
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Rientjes <rientjes@google.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oren Twaig <oren@scalemp.com>
Link: http://lkml.kernel.org/r/1420615903-28253-7-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Local variable x2apic_enabled has been assigned to but never referred,
so kill it.
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Rientjes <rientjes@google.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oren Twaig <oren@scalemp.com>
Link: http://lkml.kernel.org/r/1420615903-28253-6-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

When kernel doesn't support X2APIC but BIOS has enabled X2APIC, system
may panic or hang without useful messages. On the other hand, it's
hard to dynamically disable X2APIC when CONFIG_X86_X2APIC is disabled.
So panic with a clear message in such a case.

Now system panics as below when X2APIC is disabled and interrupt remapping
is enabled:
[    0.316118] LAPIC pending interrupts after 512 EOI
[    0.322126] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.368655] Kernel panic - not syncing: timer doesn't work through Interrupt-remapped IO-APIC
[    0.378300] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.0+ #340
[    0.385300] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIN1.86B.0051.L05.1406240953 06/24/2014
[    0.396997]  ffff88046dc03000 ffff88046c307dd8 ffffffff8179dada 00000000000043f2
[    0.405629]  ffffffff81a92158 ffff88046c307e58 ffffffff8179b757 0000000000000002
[    0.414261]  0000000000000008 ffff88046c307e68 ffff88046c307e08 ffffffff813ad82b
[    0.422890] Call Trace:
[    0.425711]  [<ffffffff8179dada>] dump_stack+0x45/0x57
[    0.431533]  [<ffffffff8179b757>] panic+0xc1/0x1f5
[    0.436978]  [<ffffffff813ad82b>] ? delay_tsc+0x3b/0x70
[    0.442910]  [<ffffffff8166fa2c>] panic_if_irq_remap+0x1c/0x20
[    0.449524]  [<ffffffff81d73645>] setup_IO_APIC+0x405/0x82e
[    0.464979]  [<ffffffff81d6fcc2>] native_smp_prepare_cpus+0x2d9/0x31c
[    0.472274]  [<ffffffff81d5d0ac>] kernel_init_freeable+0xd6/0x223
[    0.479170]  [<ffffffff81792ad0>] ? rest_init+0x80/0x80
[    0.485099]  [<ffffffff81792ade>] kernel_init+0xe/0xf0
[    0.490932]  [<ffffffff817a537c>] ret_from_fork+0x7c/0xb0
[    0.497054]  [<ffffffff81792ad0>] ? rest_init+0x80/0x80
[    0.502983] ---[ end Kernel panic - not syncing: timer doesn't work through Interrupt-remapped IO-APIC

System hangs as below when X2APIC and interrupt remapping are both disabled:
[    1.102782] pci 0000:00:02.0: System wakeup disabled by ACPI
[    1.109351] pci 0000:00:03.0: System wakeup disabled by ACPI
[    1.115915] pci 0000:00:03.2: System wakeup disabled by ACPI
[    1.122479] pci 0000:00:03.3: System wakeup disabled by ACPI
[    1.132274] pci 0000:00:1c.0: Enabling MPC IRBNCE
[    1.137620] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[    1.145239] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    1.151790] pci 0000:00:1c.7: Enabling MPC IRBNCE
[    1.157128] pci 0000:00:1c.7: Intel PCH root port ACS workaround enabled
[    1.164748] pci 0000:00:1c.7: System wakeup disabled by ACPI
[    1.171447] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    1.178612] acpiphp: Slot [8] registered
[    1.183095] pci 0000:00:02.0: PCI bridge to [bus 01]
[    1.188867] acpiphp: Slot [2] registered

With this patch applied, the system panics in both cases with a proper
panic message.
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Rientjes <rientjes@google.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oren Twaig <oren@scalemp.com>
Link: http://lkml.kernel.org/r/1420615903-28253-5-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

If x2apic got disabled on the kernel command line, then the following
issue can happen:

enable_IR_x2apic()
   ....
   x2apic_mode = 1;
   enable_x2apic();

     if (x2apic_disabled) {
	__disable_x2apic();
	return;
     }

That leaves X2APIC disabled in hardware, but x2apic_mode stays 1. So
all other code which checks x2apic_mode gets the wrong information.

Set x2apic_mode to 0 after disabling it in hardware.

This is just a hotfix. The proper solution is to rework this code so
it has seperate functions for the initial setup on the boot processor
and the secondary cpus, but that's beyond the scope of this fix.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Rientjes <rientjes@google.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oren Twaig <oren@scalemp.com>

No reason anymore to do GFP_ATOMIC allocations which are not harmful
in the normal bootup case, but matter in the physical hotplug
scenario.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NBorislav Petkov <bp@alien8.de>
Acked-and-tested-by: NJoerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/20141205084147.472428339@linutronix.de
Link: http://lkml.kernel.org/r/1420615903-28253-4-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>