- 29 10月, 2013 1 次提交
-
-
由 Kevin Hao 提交于
Currently all these boards use the same machine struct and also select the same kernel options, so it seems a bit of redundant to keep one separate kernel option for each board. Also update the defconfigs according to this change. Signed-off-by: NKevin Hao <haokexin@gmail.com> Signed-off-by: NScott Wood <scottwood@freescale.com>
-
- 14 8月, 2013 2 次提交
-
-
由 Kevin Hao 提交于
We have split the math emulation into two parts. This makes it possible to just emulate the unimplemented floating point instructions on these boards. Signed-off-by: NKevin Hao <haokexin@gmail.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kevin Hao 提交于
I got the following error on my t4240qds board. ntpd[2713]: unhandled signal 4 at 0fd5b448 nip 0fd5b448 lr 0fd5b424 code 30001 The root cause is that the float point instruction 'fsqrt' is used. But this instruction is not implemented on e6500 core. Even this does seem a gcc bug, I would like to enable the math emulation in the kernel to workaround this kind of issue. Signed-off-by: NKevin Hao <haokexin@gmail.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 08 8月, 2013 1 次提交
-
-
由 Zhenhua Luo 提交于
When using recent udev, the /dev node mount requires CONFIG_DEVTMPFS_MOUNT is enabled in Kernel. The patch enables the option in defconfig of Freescale QorIQ targets. Changed defconfig list: arch/powerpc/configs/85xx/p1023rds_defconfig arch/powerpc/configs/corenet32_smp_defconfig arch/powerpc/configs/corenet64_smp_defconfig arch/powerpc/configs/mpc85xx_smp_defconfig arch/powerpc/configs/mpc85xx_defconfig arch/powerpc/configs/mpc83xx_defconfig Signed-off-by: NZhenhua Luo <zhenhua.luo@freescale.com> [scottwood@freescale.com: added mpc83xx and non-smp mpc85xx] Signed-off-by: NScott Wood <scottwood@freescale.com>
-
- 10 4月, 2013 1 次提交
-
-
由 Shaveta Leekha 提交于
Signed-off-by: NShaveta Leekha <shaveta@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 19 3月, 2013 1 次提交
-
-
由 Prabhakar Kushwaha 提交于
Add CONFIG(s) required for NAND and NOR flash controller usage. It defines MTD, Jffs2 and UBIFS file system required for controllers. It also enables IFC controller Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 13 3月, 2013 2 次提交
-
-
由 Scott Wood 提交于
This is a commonly used ethernet card, especially with mainline kernels which lack datapath support. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
* Add support for up to 24 cores on T4240 (includes threads) * Enable AltiVec support (on T4240) * Add T4240QDS board into build * Other changes are due to general kernel update of defconfig Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 29 1月, 2013 1 次提交
-
-
由 Scott Wood 提交于
While this should be harmless now that distribute_irqs obeys MPIC_SINGLE_DEST_CPU, there's no reason to enable this on mpc85xx/mpc86xx since MPIC_SINGLE_DEST_CPU will always be set. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 28 1月, 2013 1 次提交
-
-
由 Frederic Weisbecker 提交于
If we want to stop the tick further idle, we need to be able to account the cputime without using the tick. Virtual based cputime accounting solves that problem by hooking into kernel/user boundaries. However implementing CONFIG_VIRT_CPU_ACCOUNTING require low level hooks and involves more overhead. But we already have a generic context tracking subsystem that is required for RCU needs by archs which plan to shut down the tick outside idle. This patch implements a generic virtual based cputime accounting that relies on these generic kernel/user hooks. There are some upsides of doing this: - This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING if context tracking is already built (already necessary for RCU in full tickless mode). - We can rely on the generic context tracking subsystem to dynamically (de)activate the hooks, so that we can switch anytime between virtual and tick based accounting. This way we don't have the overhead of the virtual accounting when the tick is running periodically. And one downside: - There is probably more overhead than a native virtual based cputime accounting. But this relies on hooks that are already set anyway. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
-
- 13 9月, 2012 1 次提交
-
-
由 Timur Tabi 提交于
Add support for the Freescale P5040DS Reference Board ("Superhydra"), which is similar to the P5020DS. Features of the P5040 are listed below, but not all of these features (e.g. DPAA networking) are currently supported. Four P5040 single-threaded e5500 cores built Up to 2.4 GHz with 64-bit ISA support Three levels of instruction: user, supervisor, hypervisor CoreNet platform cache (CPC) 2.0 MB configures as dual 1 MB blocks hierarchical interconnect fabric Two 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving support Up to 1600MT/s Memory pre-fetch engine DPAA incorporating acceleration for the following functions Packet parsing, classification, and distribution (FMAN) Queue management for scheduling, packet sequencing and congestion management (QMAN) Hardware buffer management for buffer allocation and de-allocation (BMAN) Cryptography acceleration (SEC 5.0) at up to 40 Gbps SerDes 20 lanes at up to 5 Gbps Supports SGMII, XAUI, PCIe rev1.1/2.0, SATA Ethernet interfaces Two 10 Gbps Ethernet MACs Ten 1 Gbps Ethernet MACs High-speed peripheral interfaces Two PCI Express 2.0/3.0 controllers Additional peripheral interfaces Two serial ATA (SATA 2.0) controllers Two high-speed USB 2.0 controllers with integrated PHY Enhanced secure digital host controller (SD/MMC/eMMC) Enhanced serial peripheral interface (eSPI) Two I2C controllers Four UARTs Integrated flash controller supporting NAND and NOR flash DMA Dual four channel Support for hardware virtualization and partitioning enforcement Extra privileged level for hypervisor support QorIQ Trust Architecture 1.1 Secure boot, secure debug, tamper detection, volatile key storage Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 23 8月, 2012 1 次提交
-
-
由 Kim Phillips 提交于
Yocto (Built by Poky 7.0) 1.2 root filesystems fail to boot, at least over nfs, with: Failed to mount /dev: No such device Configuring DEVTMPFS fixes it. Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 11 7月, 2012 1 次提交
-
-
由 Shengzhou Liu 提交于
Enable USB, MMC, SATA, LBC, MTD, NAND, SPI, PCIe, EDAC, VFAT, NFS, etc. Signed-off-by: NShengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 10 7月, 2012 1 次提交
-
-
由 Kim Phillips 提交于
At least for crypto/IPSec, doing so provides users with a better performance experience out of the box. Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 30 3月, 2012 1 次提交
-
-
由 Grant Likely 提交于
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 29 3月, 2012 1 次提交
-
-
由 Shaveta Leekha 提交于
Enable I2C char dev interface for user space testing of I2C controler. Enable the I2C driver on 64-bit builds (corenet64_smp_defconfig) as it was missing. Signed-off-by: NShaveta Leekha <shaveta@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 05 1月, 2012 1 次提交
-
-
由 Kumar Gala 提交于
corenet64_smp_defconfig: - enabled rapidio corenet32_smp_defconfig: - enabled hugetlbfs, rapidio mpc85xx_smp_defconfig: - enabled P1010RDB, hugetlbfs, SPI, SDHC, Crypto/CAAM mpc85xx_smp_defconfig: - enabled hugetlbfs, SPI, SDHC, Crypto/CAAM Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 07 12月, 2011 1 次提交
-
-
由 Becky Bruce 提交于
Signed-off-by: NBecky Bruce <beckyb@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 12 10月, 2011 1 次提交
-
-
由 Becky Bruce 提交于
Updates from make savedefconfig. Signed-off-by: NBecky Bruce <beckyb@kernel.crashing.org> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 31 8月, 2011 1 次提交
-
-
由 Kim Phillips 提交于
corenet based SoCs have SEC4 h/w, so enable the SEC4 driver, caam, and the algorithms it supports, and disable the SEC2/3 driver, talitos. Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 23 6月, 2011 1 次提交
-
-
由 Kumar Gala 提交于
Rather than trying to use the core name we use corenet to distinquish the platform/core combo. corenet64 will be a 64-bit kernel build and we'll add a new defconfig for corenet32 for a 32-bit platforms. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 19 5月, 2011 2 次提交
-
-
由 Scott Wood 提交于
This debug option has no overhead other than a slight increase in kernel size, and makes bug reports more useful. While some end users may prefer to save the space, as a default on a kernel config aimed primarily at development on reference boards, it should be enabled. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Scott Wood 提交于
Even though support for the p5020's on-chip ethernet is not yet upstream, it is not appropriate to disable all networking support (including loopback, unix domain sockets, external ethernet devices, etc) in the defconfig. The networking settings are taken from mpc85xx_smp_defconfig, minus the drivers for ethernet devices not found on any current e5500 chip. The other changes are the result of running "make savedefconfig". Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 30 3月, 2011 1 次提交
-
-
由 Stephen Rothwell 提交于
Uwe Kleine-König reported: while working on an defconfig (arm/mx27) I noticed that just updating it[1] results in removing CONFIG_EEPROM_AT24=y. The reason is that since commit v2.6.36-5965-g5f2365d8 (misc devices: do not enable by default) MISC_DEVICES isn't enabled anymore by default. So all defconfigs that have CONFIG_SOME_SYMBOL=y (or =m) (with SOME_SYMBOL depending on MISC_DEVICES) but not CONFIG_MISC_DEVICES=y suffer from the same problem. This restores those misc devices to the powerpc defconfigs. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de Acked-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Uwe Kleine-König Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 21 1月, 2011 1 次提交
-
-
由 David Rientjes 提交于
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: NIngo Molnar <mingo@elte.hu> Acked-by: NDavid Woodhouse <david.woodhouse@intel.com> Signed-off-by: NDavid Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 10月, 2010 1 次提交
-
-
由 Kumar Gala 提交于
The p5020 SoC from Freescale is the first 64-bit Book-E processor and utilizes the two e5500 cores. Adding a defconfig that enables basic kernel for e5500 based processors. Also added the p5020 / e5500 support to the ppc64e defconfig. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-