Signed-off-by: NFranck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1290525705-6265-2-git-send-email-fbuihuu@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

and use it when appropriate.
Signed-off-by: NFranck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1290525705-6265-1-git-send-email-fbuihuu@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Make tags find the trace-event definitions
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NWANG Cong <xiyou.wangcong@gmail.com>
LKML-Reference: <1290591835.2072.438.camel@laptop>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Conflicts:
	arch/x86/kernel/apic/hw_nmi.c

Merge reason: Resolve conflict, queue up dependent patch.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Merge reason: Pick up latest fixes.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Stephane noticed that because the perf_sw_event() call is inside the
perf_event_task_sched_out() call it won't get called unless we
have a per-task counter.
Reported-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This leads to a Kconfig dep inversion, x86 selects PERF_EVENT (due to
a hw_breakpoint dep) but doesn't unconditionally provide
HAVE_PERF_EVENT.

(This can cause build failures on M386/M486 kernel .config's.)
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20101117222055.982965150@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

In a kvm virt guests, the perf counters are not emulated.  Instead they
return zero on a rdmsrl. The perf nmi handler uses the fact that crossing
a zero means the counter overflowed (for those counters that do not have
specific interrupt bits). Therefore on kvm guests, perf will swallow all
NMIs thinking the counters overflowed.

This causes problems for subsystems like kgdb which needs NMIs to do its
magic. This problem was discovered by running kgdb tests.

The solution is to write garbage into a perf counter during the
initialization and hopefully reading back the same number.  On kvm
guests, the value will be read back as zero and we disable perf as
a result.
Reported-by: NJason Wessel <jason.wessel@windriver.com>
Patch-inspired-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1290462923-30734-1-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

It was found that sometimes children of tasks with inherited events had
one extra event. Eventually it turned out to be due to the list rotation
no being exclusive with the list iteration in the inheritance code.

Cure this by temporarily disabling the rotation while we inherit the events.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Cc: <stable@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

perf bench: Add feature that measures the performance of the arch/x86/lib/memcpy_64.S memcpy routines via 'perf bench mem'

This patch ports arch/x86/lib/memcpy_64.S to perf bench mem
memcpy for benchmarking memcpy() in userland with tricky and
dirty way.

util/include/asm/cpufeature.h, util/include/asm/dwarf2.h, and
util/include/linux/linkage.h are mostly dummy files with small
wrappers, so that we are able to include memcpy_64.S
unmodified.
Signed-off-by: NHitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: h.mitake@gmail.com
Cc: Miao Xie <miaox@cn.fujitsu.com>
Cc: Ma Ling <ling.ma@intel.com>
Cc: Zhao Yakui <yakui.zhao@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andi Kleen <andi@firstfloor.org>
LKML-Reference: <1290668693-27068-2-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

After applying this patch, perf bench mem memcpy prints
both of prefualted and without prefaulted score of memcpy().

New options --no-prefault and --only-prefault are added
to print single result, mainly for scripting usage.

Usage example:

 | mitake@X201i:~/linux/.../tools/perf% ./perf bench mem memcpy -l 500MB
 | # Running mem/memcpy benchmark...
 | # Copying 500MB Bytes ...
 |
 |      634.969014 MB/Sec
 |        4.828062 GB/Sec (with prefault)
 | mitake@X201i:~/linux/.../tools/perf% ./perf bench mem memcpy -l 500MB --only-prefault
 | # Running mem/memcpy benchmark...
 | # Copying 500MB Bytes ...
 |
 |        4.705192 GB/Sec (with prefault)
 | mitake@X201i:~/linux/.../tools/perf% ./perf bench mem memcpy -l 500MB --no-prefault
 | # Running mem/memcpy benchmark...
 | # Copying 500MB Bytes ...
 |
 |      642.725568 MB/Sec
Signed-off-by: NHitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: h.mitake@gmail.com
Cc: Miao Xie <miaox@cn.fujitsu.com>
Cc: Ma Ling <ling.ma@intel.com>
Cc: Zhao Yakui <yakui.zhao@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andi Kleen <andi@firstfloor.org>
LKML-Reference: <1290668693-27068-1-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

At least on ARM, padding is inserted between rb_node and sym in struct
symbol_name_rb_node, causing "((void *)sym) - sizeof(struct rb_node)" to
point inside rb_node rather than to the symbol_name_rb_node.  Fix this
by converting the code to use container_of().

Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20101123163106.GA25677@debian>
Signed-off-by: NRabin Vincent <rabin@rab.in>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The 59365d13 commit, even being reverted by 33e0d57f, showed a non robust
behavior in 'perf record': it really should just warn the user that some
functionality will not be available.

The new behavior then becomes:

	[acme@felicio linux]$ ls -la /proc/{kallsyms,modules}
	-r-------- 1 root root 0 Nov 22 12:19 /proc/kallsyms
	-r-------- 1 root root 0 Nov 22 12:19 /proc/modules
	[acme@felicio linux]$ perf record ls -R > /dev/null
	Couldn't record kernel reference relocation symbol
	Symbol resolution may be skewed if relocation was used (e.g. kexec).
	Check /proc/kallsyms permission or run as root.
	[ perf record: Woken up 1 times to write data ]
	[ perf record: Captured and wrote 0.004 MB perf.data (~161 samples) ]
	[acme@felicio linux]$ perf report --stdio
	[kernel.kallsyms] with build id 77b05e00e64e4de1c9347d83879779b540d69f00 not found, continuing without symbols
	# Events: 98  cycles
	#
	# Overhead  Command    Shared Object                Symbol
	# ........  .......  ...............  ....................
	#
	    48.26%       ls  [kernel]         [k] ffffffff8102b92b
	    22.49%       ls  libc-2.12.90.so  [.] __strlen_sse2
	     8.35%       ls  libc-2.12.90.so  [.] __GI___strcoll_l
	     8.17%       ls  ls               [.]            11580
	     3.35%       ls  libc-2.12.90.so  [.] _IO_new_file_xsputn
	     3.33%       ls  libc-2.12.90.so  [.] _int_malloc
	     1.88%       ls  libc-2.12.90.so  [.] _int_free
	     0.84%       ls  libc-2.12.90.so  [.] malloc_consolidate
	     0.84%       ls  libc-2.12.90.so  [.] __readdir64
	     0.83%       ls  ls               [.] strlen@plt
	     0.83%       ls  libc-2.12.90.so  [.] __GI_fwrite_unlocked
	     0.83%       ls  libc-2.12.90.so  [.] __memcpy_sse2

	#
	# (For a higher level overview, try: perf report --sort comm,dso)
	#
[acme@felicio linux]$

It still has the build-ids for DSOs in the maps with hits:

[acme@felicio linux]$ perf buildid-list
77b05e00e64e4de1c9347d83879779b540d69f00 [kernel.kallsyms]
09c4a431a4a8b648fcfc2c2bdda70f56050ddff1 /bin/ls
af75ea9ad951d25e0f038901a11b3846dccb29a4 /lib64/libc-2.12.90.so
[acme@felicio linux]$

That can be used in another machine to resolve kernel symbols.

Cc: Eugene Teo <eugeneteo@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jesper Juhl <jj@chaosbits.net>
Cc: Marcus Meissner <meissner@suse.de>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch makes several changes to "perf stat":

- "perf stat" will no longer go ahead and run the application when one or
more of the specified events could not be opened.
- Use error() and die() instead of pr_err() so that the output is more
consistent with "perf top" and "perf record".
- Handle permission errors in a more robust way, and in a similar way to
"perf record" and "perf top".

In addition, the sys_perf_event_open() error handling of "perf top" and "perf
record" is made more consistent and adds the following phrase when an event
doesn't open (with something ther than an access or permission error):

"/bin/dmesg may provide additional information."

This is added because kernel code doesn't have a good way of expressing
detailed errors to user space, so its only avenue is to use printk's.  However,
many users may not think of looking at dmesg to find out why an event is being
rejected.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <fweisbec@gmail.com>
Cc: Ian Munsie <ianmunsi@au1.ibm.com>
Cc: Michael Ellerman <michaele@au1.ibm.com>
LKML-Reference: <1290217044-26293-1-git-send-email-cjashfor@linux.vnet.ibm.com>
Signed-off-by: NCorey Ashford <cjashfor@linux.vnet.ibm.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: Add EXT4_IOC_TRIM ioctl to handle batched discard
  fs: Do not dispatch FITRIM through separate super_operation
  ext4: ext4_fill_super shouldn't return 0 on corruption
  jbd2: fix /proc/fs/jbd2/<dev> when using an external journal
  ext4: missing unlock in ext4_clear_request_list()
  ext4: fix setting random pages PageUptodate

Filesystem independent ioctl was rejected as not common enough to be in
core vfs ioctl. Since we still need to access to this functionality this
commit adds ext4 specific ioctl EXT4_IOC_TRIM to dispatch
ext4_trim_fs().

It takes fstrim_range structure as an argument. fstrim_range is definec in
the include/linux/fs.h and its definition is as follows.

struct fstrim_range {
	__u64 start;
	__u64 len;
	__u64 minlen;
}

start	- first Byte to trim
len	- number of Bytes to trim from start
minlen	- minimum extent length to trim, free extents shorter than this
  number of Bytes will be ignored. This will be rounded up to fs
  block size.

After the FITRIM is done, the number of actually discarded Bytes is stored
in fstrim_range.len to give the user better insight on how much storage
space has been really released for wear-leveling.
Signed-off-by: NLukas Czerner <lczerner@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

There was concern that FITRIM ioctl is not common enough to be included
in core vfs ioctl, as Christoph Hellwig pointed out there's no real point
in dispatching this out to a separate vector instead of just through
->ioctl.

So this commit removes ioctl_fstrim() from vfs ioctl and trim_fs
from super_operation structure.
Signed-off-by: NLukas Czerner <lczerner@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: fix readdir EOVERFLOW on 32-bit archs
  ceph: fix frag offset for non-leftmost frags
  ceph: fix dangling pointer
  ceph: explicitly specify page alignment in network messages
  ceph: make page alignment explicit in osd interface
  ceph: fix comment, remove extraneous args
  ceph: fix update of ctime from MDS
  ceph: fix version check on racing inode updates
  ceph: fix uid/gid on resent mds requests
  ceph: fix rdcache_gen usage and invalidate
  ceph: re-request max_size if cap auth changes
  ceph: only let auth caps update max_size
  ceph: fix open for write on clustered mds
  ceph: fix bad pointer dereference in ceph_fill_trace
  ceph: fix small seq message skipping
  Revert "ceph: update issue_seq on cap grant"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (31 commits)
  net: fix kernel-doc for sk_filter_rcu_release
  be2net: Fix to avoid firmware update when interface is not open.
  netfilter: fix IP_VS dependencies
  net: irda: irttp: sync error paths of data- and udata-requests
  ipv6: Expose reachable and retrans timer values as msecs
  ipv6: Expose IFLA_PROTINFO timer values in msecs instead of jiffies
  3c59x: fix build failure on !CONFIG_PCI
  ipg.c: remove id [SUNDANCE, 0x1021]
  net: caif: spi: fix potential NULL dereference
  ath9k_htc: Avoid setting QoS control for non-QoS frames
  net: zero kobject in rx_queue_release
  net: Fix duplicate volatile warning.
  MAINTAINERS: Add stmmac maintainer
  bonding: fix a race in IGMP handling
  cfg80211: fix can_beacon_sec_chan, reenable HT40
  gianfar: fix signedness issue
  net: bnx2x: fix error value sign
  8139cp: fix checksum broken
  r8169: fix checksum broken
  rds: Integer overflow in RDS cmsg handling
  ...

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  sata_via: apply magic FIFO fix to vt6420 too

This reverts commit 59365d13.

It turns out that this can break certain existing user land setups.
Quoth Sarah Sharp:

 "On Wednesday, I updated my branch to commit 460781b5 from linus' tree,
  and my box would not boot.  klogd segfaulted, which stalled the whole
  system.

  At first I thought it actually hung the box, but it continued booting
  after 5 minutes, and I was able to log in.  It dropped back to the
  text console instead of the graphical bootup display for that period
  of time.  dmesg surprisingly still works.  I've bisected the problem
  down to this commit (commit 59365d13)

  The box is running klogd 1.5.5ubuntu3 (from Jaunty).  Yes, I know
  that's old.  I read the bit in the commit about changing the
  permissions of kallsyms after boot, but if I can't boot that doesn't
  help."

So let's just keep the old default, and encourage distributions to do
the "chmod -r /proc/kallsyms" in their bootup scripts.  This is not
worth a kernel option to change default behavior, since it's so easily
done in user space.
Reported-and-bisected-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Marcus Meissner <meissner@suse.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Eugene Teo <eugeneteo@kernel.org>
Cc: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Also remove old snail mail address from CREDITS, moved years ago.

LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This change removes the use of hardcoded absolute "/usr/include/elfutils" paths
from the perf build.  The problem with hardcoded paths is that it prevents them
from being overridden by $prefix or by -I in CFLAGS (e.g., for cross-compiling
purposes).

Instead, just include the "elfutils/" subdirectory as a relative path when
files are needed from that directory.

Tested by building perf:
- Cross-compiled for ARM on x86_64
- Built natively on x86_64
- Built on x86_64 with /usr/include/elfutils moved to another location
  and manually included in CFLAGS
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
LKML-Reference: <1289945793-31441-1-git-send-email-rmorell@nvidia.com>
Signed-off-by: NRobert Morell <rmorell@nvidia.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: fix typo in keycode validation supporting large scancodes
  Input: aiptek - tighten up permissions on sysfs attributes
  Input: sysrq - pass along lone Alt + SysRq

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel:
  drm/i915: Disable FBC on Ironlake to save 1W
  drm/i915: Take advantage of auto-polling CRT hotplug detection on PCH hardware
  drm/i915/crt: Introduce struct intel_crt
  drm/i915: Do not hold mutex when faulting in user addresses
  drm: radeon: fix error value sign
  drm/radeon/kms: fix and unify tiled buffer alignment checking for r6xx/7xx
  drm/i915: Retire any pending operations on the old scanout when switching
  drm/i915: Fix I2C adapter registration

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (40 commits)
  drm/radeon/kms: i2c s/sprintf/snprintf/g for safety
  drm/radeon/kms: fix i2c pad masks on rs4xx
  drm/ttm: Fix up a theoretical deadlock
  drm/radeon/kms: fix tiling info on evergreen
  drm/radeon/kms: fix alignment when allocating buffers
  drm/vmwgfx: Fix up an error path during bo creation
  drm/radeon/kms: register an i2c adapter name for the dp aux bus
  drm/radeon/kms/atom: add proper external encoders support
  drm/radeon/kms/atom: cleanup and unify DVO handling
  drm/radeon/kms: properly power up/down the eDP panel as needed (v4)
  drm/radeon/kms/atom: set sane defaults in atombios_get_encoder_mode()
  drm/radeon/kms: turn the backlight off explicitly for dpms
  drm/radeon/kms: fix typo in r600 cs checker
  drm: radeon: fix error value sign
  drm/radeon/kms: fix and unify tiled buffer alignment checking for r6xx/7xx
  nouveau: Acknowledge HPD irq in handler, not bottom half
  drm/nouveau: Fix a few confusions between "chipset" and "card_type".
  drm/nouveau: don't expose backlight control when available through ACPI
  drm/nouveau/pm: improve memtiming mappings
  drm/nouveau: Make PCIE GART size depend on the available RAMIN space.
  ...

This patch adds a new -A option to perf stat. If specified then perf stat does
not aggregate counts across all monitored CPUs in system-wide mode, i.e., when
using -a. This option is not supported in per-thread mode.

Being able to get a per-cpu breakdown is useful to detect imbalances between
CPUs when running a uniform workload than spans all monitored CPUs.

The second version corrects the missing cpumap[] support, so that it works when
the -C option is used.

The third version fixes a missing cpumap[] in print_counter() and removes a
stray patch in builtin-trace.c.

Examples on a 4-way system:

# perf stat -a   -e cycles,instructions -- sleep 1
 Performance counter stats for 'sleep 1':
         9592808135  cycles
         3490380006  instructions             #      0.364 IPC
        1.001584632  seconds time elapsed

# perf stat -a -A -e cycles,instructions -- sleep 1
 Performance counter stats for 'sleep 1':
CPU0            2398163767  cycles
CPU1            2398180817  cycles
CPU2            2398217115  cycles
CPU3            2398247483  cycles
CPU0             872282046  instructions             #      0.364 IPC
CPU1             873481776  instructions             #      0.364 IPC
CPU2             872638127  instructions             #      0.364 IPC
CPU3             872437789  instructions             #      0.364 IPC
        1.001556052  seconds time elapsed

Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
LKML-Reference: <4ce257b5.1e07e30a.7b6b.3aa9@mx.google.com>
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

vt6420 has the same FIFO overflow problem as vt6421 when combined with
certain devices.  This patch applies the magic fix to vt6420 too.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NMartin Qvist <q@maq.dk>
Reported-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Joseph Chan <JosephChan@via.com.tw>
Cc: stable@kernel.org
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Fix kernel-doc warning for sk_filter_rcu_release():

Warning(net/core/filter.c:586): missing initial short description on line:
 * 	sk_filter_rcu_release: Release a socket filter by rcu_head
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc:	"David S. Miller" <davem@davemloft.net>
Cc:	netdev@vger.kernel.org
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since interrupts are enabled only when open is called on the interface,
Attempting a firmware update operation when interface is down could lead to
partial success or failure of operation. This fix fails the request if
netif_running is false.
Signed-off-by: NSarveshwar Bandi <Sarveshwar.Bandi@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

At the start of ext4_fill_super, ret is set to -EINVAL, and any failure path
out of that function returns ret.  However, the generic_check_addressable
clause sets ret = 0 (if it passes), which means that a subsequent failure (e.g.
a group checksum error) returns 0 even though the mount should fail.  This
causes vfs_kern_mount in turn to think that the mount succeeded, leading to an
oops.

A simple fix is to avoid using ret for the generic_check_addressable check,
which was last changed in commit 30ca22c7.
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Frame buffer compression is broken on Ironlake due to buggy hardware.
Currently it is disabled through chicken bits, but it still consumes
over 1W more than if we simply never attempt to enable the FBC code
paths.
Signed-off-by: NAlex Shi <alex.shi@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org

Both IBX and CPT have an automatic hotplug detection mode which appears to work reliably enough
that we can dispense with the manual force hotplug trigger stuff. This means that
hotplug detection is as simple as reading the current hotplug register values.

The first time the hotplug detection is activated, the code synchronously waits for a hotplug
sequence in case the hardware hasn't bothered to do a detection cycle since being initialized.
Signed-off-by: NKeith Packard <keithp@keithp.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

We will use this structure in future patches to store CRT specific
information on the encoder.

Split out and tweaked from a patch by Keith Packard.
Signed-off-by: NKeith Packard <keithp@kithp.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Linus Torvalds found that it was rather trivial to trigger a system
freeze:

  In fact, with lockdep, I don't even need to do the sysrq-d thing: it
  shows the bug as it happens. It's the X server taking the same lock
  recursively.

  Here's the problem:

    =============================================
    [ INFO: possible recursive locking detected ]
    2.6.37-rc2-00012-gbdbd01ac #7
    ---------------------------------------------
    Xorg/2816 is trying to acquire lock:
     (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c626c>] i915_gem_fault+0x50/0x17e

    but task is already holding lock:
     (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c403b>] i915_mutex_lock_interruptible+0x28/0x4a

    other info that might help us debug this:
    2 locks held by Xorg/2816:
     #0:  (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c403b>] i915_mutex_lock_interruptible+0x28/0x4a
     #1:  (&mm->mmap_sem){++++++}, at: [<ffffffff81022d4f>] page_fault+0x156/0x37b

This recursion was introduced by rearranging the locking to avoid the
double locking on the fast path (4f27b5d and fbd5a26d) and the
introduction of the prefault to encourage the fast paths (b5e4f2b). In
order to undo the problem, we rearrange the code to perform the access
validation upfront, attempt to prefault and then fight for control of the
mutex.  the best case scenario where the mutex is uncontended the
prefaulting is not wasted.
Reported-and-tested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

As per advice from Jean Delvare.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Acked-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

These got lost in the last i2c cleanup.  Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=23222Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] remove SCSI host lock and serial number usage from ata_scsi_queuecmd

Update kernel-doc and Documentation maintainers info.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>