cgroup_exit() is called when a task exits and disassociates the
exiting task from its cgroups and half-attach it to the root cgroup.
This is unnecessary and undesirable.

No controller actually needs an exiting task to be disassociated with
non-root cgroups.  Both cpu and perf_event controllers update the
association to the root cgroup from their exit callbacks just to keep
consistent with the cgroup core behavior.

Also, this disassociation makes it difficult to track resources held
by zombies or determine where the zombies came from.  Currently, pids
controller is completely broken as it uncharges on exit and zombies
always escape the resource restriction.  With cgroup association being
reset on exit, fixing it is pretty painful.

There's no reason to reset cgroup membership on exit.  The zombie can
be removed from its css_set so that it doesn't show up on
"cgroup.procs" and thus can't be migrated or interfere with cgroup
removal.  It can still pin and point to the css_set so that its cgroup
membership is maintained.  This patch makes cgroup core keep zombies
associated with their cgroups at the time of exit.

* Previous patches decoupled populated_cnt tracking from css_set
  lifetime, so a dying task can be simply unlinked from its css_set
  while pinning and pointing to the css_set.  This keeps css_set
  association from task side alive while hiding it from "cgroup.procs"
  and populated_cnt tracking.  The css_set reference is dropped when
  the task_struct is freed.

* ->exit() callback no longer needs the css arguments as the
  associated css never changes once PF_EXITING is set.  Removed.

* cpu and perf_events controllers no longer need ->exit() callbacks.
  There's no reason to explicitly switch away on exit.  The final
  schedule out is enough.  The callbacks are removed.

* On traditional hierarchies, nothing changes.  "/proc/PID/cgroup"
  still reports "/" for all zombies.  On the default hierarchy,
  "/proc/PID/cgroup" keeps reporting the cgroup that the task belonged
  to at the time of exit.  If the cgroup gets removed before the task
  is reaped, " (deleted)" is appended.

v2: Build brekage due to missing dummy cgroup_free() when
    !CONFIG_CGROUP fixed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>

css_set_rwsem is the inner lock protecting css_sets and is accessed
from hot paths such as fork and exit.  Internally, it has no reason to
be a rwsem or even mutex.  There are no internal blocking operations
while holding it.  This was rwsem because css task iteration used to
expose it to external iterator users.  As the previous patch updated
css task iteration such that the locking is not leaked to its users,
there's no reason to keep it a rwsem.

This patch converts css_set_rwsem to a spinlock and rename it to
css_set_lock.  It uses bh-safe operations as a planned usage needs to
access it from RCU callback context.
Signed-off-by: NTejun Heo <tj@kernel.org>

css_sets are synchronized through css_set_rwsem but the locking scheme
is kinda bizarre.  The hot paths - fork and exit - have to write lock
the rwsem making the rw part pointless; furthermore, many readers
already hold cgroup_mutex.

One of the readers is css task iteration.  It read locks the rwsem
over the entire duration of iteration.  This leads to silly locking
behavior.  When cpuset tries to migrate processes of a cgroup to a
different NUMA node, css_set_rwsem is held across the entire migration
attempt which can take a long time locking out forking, exiting and
other cgroup operations.

This patch updates css task iteration so that it locks css_set_rwsem
only while the iterator is being advanced.  css task iteration
involves two levels - css_set and task iteration.  As css_sets in use
are practically immutable, simply pinning the current one is enough
for resuming iteration afterwards.  Task iteration is tricky as tasks
may leave their css_set while iteration is in progress.  This is
solved by keeping track of active iterators and advancing them if
their next task leaves its css_set.

v2: put_task_struct() in css_task_iter_next() moved outside
    css_set_rwsem.  A later patch will add cgroup operations to
    task_struct free path which may grab the same lock and this avoids
    deadlock possibilities.

    css_set_move_task() updated to use list_for_each_entry_safe() when
    walking task_iters and advancing them.  This is necessary as
    advancing an iter may remove it from the list.
Signed-off-by: NTejun Heo <tj@kernel.org>

* Rename css_advance_task_iter() to css_task_iter_advance_css_set()
  and make it clear it->task_pos too at the end of the iteration.

* Factor out css_task_iter_advance() from css_task_iter_next().  The
  new function whines if called on a terminated iterator.

Except for the termination check, this is pure reorganization and
doesn't introduce any behavior changes.  This will help the planned
locking update for css_task_iter.
Signed-off-by: NTejun Heo <tj@kernel.org>

A task is associated and disassociated with its css_set in three
places - during migration, after a new task is created and when a task
exits.  The first is handled by cgroup_task_migrate() and the latter
two are open-coded.

These are similar operations and spreading them over multiple places
makes it harder to follow and update.  This patch collects all task
css_set [dis]association operations into css_set_move_task().

While css_set_move_task() may check whether populated state needs to
be updated when not strictly necessary, the behavior is essentially
equivalent before and after this patch.
Signed-off-by: NTejun Heo <tj@kernel.org>

css task iteration will be updated to not leak cgroup internal locking
to iterator users.  In preparation, update css_set and task lists to
be in chronological order.

For tasks, as migration path is already using list_splice_tail_init(),
only cgroup_enable_task_cg_lists() and cgroup_post_fork() need
updating.  For css_sets, link_css_set() is the only place which needs
to be updated.
Signed-off-by: NTejun Heo <tj@kernel.org>

cgroup_destroy_locked() currently tests whether any css_sets are
associated to reject removal if the cgroup contains tasks.  This works
because a css_set's refcnt converges with the number of tasks linked
to it and thus there's no css_set linked to a cgroup if it doesn't
have any live tasks.

To help tracking resource usage of zombie tasks, putting the ref of
css_set will be separated from disassociating the task from the
css_set which means that a cgroup may have css_sets linked to it even
when it doesn't have any live tasks.

This patch updates cgroup_destroy_locked() so that it tests
cgroup_is_populated(), which counts the number of populated css_sets,
instead of whether cgrp->cset_links is empty to determine whether the
cgroup is populated or not.  This ensures that rmdirs won't be
incorrectly rejected for cgroups which only contain zombie tasks.
Signed-off-by: NTejun Heo <tj@kernel.org>

Currently, css_sets don't pin the associated cgroups.  This is okay as
a cgroup with css_sets associated are not allowed to be removed;
however, to help resource tracking for zombie tasks, this is scheduled
to change such that a cgroup can be removed even when it has css_sets
associated as long as none of them are populated.

To ensure that a cgroup doesn't go away while css_sets are still
associated with it, make each associated css_set hold a reference on
the cgroup if non-root.

v2: Root cgroups are special and shouldn't be ref'd by css_sets.
Signed-off-by: NTejun Heo <tj@kernel.org>

Relocate cgroup_get(), cgroup_tryget() and cgroup_put() upwards.  This
is pure code reorganization to prepare for future changes.
Signed-off-by: NTejun Heo <tj@kernel.org>

To trigger release agent when the last task leaves the cgroup,
check_for_release() is called from put_css_set_locked(); however,
css_set being unlinked is being decoupled from task leaving the cgroup
and the correct condition to test is cgroup->nr_populated dropping to
zero which check_for_release() is already updated to test.

This patch moves check_for_release() invocation from
put_css_set_locked() to cgroup_update_populated().
Signed-off-by: NTejun Heo <tj@kernel.org>

Currently, cgroup_has_tasks() tests whether the target cgroup has any
css_set linked to it.  This works because a css_set's refcnt converges
with the number of tasks linked to it and thus there's no css_set
linked to a cgroup if it doesn't have any live tasks.

To help tracking resource usage of zombie tasks, putting the ref of
css_set will be separated from disassociating the task from the
css_set which means that a cgroup may have css_sets linked to it even
when it doesn't have any live tasks.

This patch replaces cgroup_has_tasks() with cgroup_is_populated()
which tests cgroup->nr_populated instead which locally counts the
number of populated css_sets.  Unlike cgroup_has_tasks(),
cgroup_is_populated() is recursive - if any of the descendants is
populated, the cgroup is populated too.  While this changes the
meaning of the test, all the existing users are okay with the change.

While at it, replace the open-coded ->populated_cnt test in
cgroup_events_show() with cgroup_is_populated().
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>

Currently, cgroup->nr_populated counts whether the cgroup has any
css_sets linked to it and the number of children which has non-zero
->nr_populated.  This works because a css_set's refcnt converges with
the number of tasks linked to it and thus there's no css_set linked to
a cgroup if it doesn't have any live tasks.

To help tracking resource usage of zombie tasks, putting the ref of
css_set will be separated from disassociating the task from the
css_set which means that a cgroup may have css_sets linked to it even
when it doesn't have any live tasks.

This patch updates cgroup->nr_populated so that for the cgroup itself
it counts the number of css_sets which have tasks associated with them
so that empty css_sets don't skew the populated test.
Signed-off-by: NTejun Heo <tj@kernel.org>

cgroup_task_migrate() no longer uses @old_cgrp.  Remove it.
Signed-off-by: NTejun Heo <tj@kernel.org>

49d1dc4b ("cgroup: implement static_key based
cgroup_subsys_enabled() and cgroup_subsys_on_dfl()") converted cgroup
enabled test to use static_key; however, cgroup_disable() is called
before static_key subsystem itself is initialized and thus leads to
the following warning when "cgroup_disable=" parameter is specified.

 WARNING: CPU: 0 PID: 0 at kernel/jump_label.c:99 static_key_slow_dec+0x44/0x60()
 static_key_slow_dec used before call to jump_label_init
 ...
 Call Trace:
  [<ffffffff813b18c2>] dump_stack+0x44/0x62
  [<ffffffff8108dd52>] warn_slowpath_common+0x82/0xc0
  [<ffffffff8108ddec>] warn_slowpath_fmt+0x5c/0x80
  [<ffffffff8119c054>] static_key_slow_dec+0x44/0x60
  [<ffffffff81d826b6>] cgroup_disable+0xaf/0xd6
  [<ffffffff81d5f9de>] unknown_bootoption+0x8c/0x194
  [<ffffffff810b0c03>] parse_args+0x273/0x4a0
  [<ffffffff81d5fd67>] start_kernel+0x205/0x4b8
 ...

Fix it by making cgroup_disable() to record the subsystems to disable
in cgroup_disable_mask and moving the actual application to
cgroup_init() which is late enough and where the enabled state is
first used.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NAndrey Wagin <avagin@gmail.com>
Link: http://lkml.kernel.org/g/CANaxB-yFuS4SA2znSvcKrO9L_CbHciHYW+o9bN8sZJ8eR9FxYA@mail.gmail.com
Fixes: 49d1dc4b

Pull to receive 9badce00 ("cgroup, writeback: don't enable cgroup
writeback on traditional hierarchies").  The commit adds
cgroup_on_dfl() usages in include/linux/backing-dev.h thus causing a
silent conflict with 9e10a130 ("cgroup: replace cgroup_on_dfl()
tests in controllers with cgroup_subsys_on_dfl()").  The conflict is
fixed during this merge.
Signed-off-by: NTejun Heo <tj@kernel.org>

inode_cgwb_enabled() gates cgroup writeback support.  If it returns
true, each inode is attached to the corresponding memory domain which
gets mapped to io domain.  It currently only tests whether the
filesystem and bdi support cgroup writeback; however, cgroup writeback
support doesn't work on traditional hierarchies and thus it should
also test whether memcg and iocg are on the default hierarchy.

This caused traditional hierarchy setups to hit the cgroup writeback
path inadvertently and ended up creating separate writeback domains
for each memcg and mapping them all to the root iocg uncovering a
couple issues in the cgroup writeback path.

cgroup writeback was never meant to be enabled on traditional
hierarchies.  Make inode_cgwb_enabled() test whether both memcg and
iocg are on the default hierarchy.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NArtem Bityutskiy <dedekind1@gmail.com>
Reported-by: NDexuan Cui <decui@microsoft.com>
Link: http://lkml.kernel.org/g/1443012552.19983.209.camel@gmail.com
Link: http://lkml.kernel.org/g/f30d4a6aa8a546ff88f73021d026a453@SIXPR30MB031.064d.mgd.msft.net

cgroup_update_dfl_csses() is responsible for migrating processes when
controllers are enabled or disabled on the default hierarchy.  As the
css association changes for all the processes in the affected cgroups,
this involves migrating multiple processes.

Up until now, it was implemented by migrating process-by-process until
the source css_sets are empty; however, this means that if a process
fails to migrate after some succeed before it, the recovery is very
tricky.  This was considered okay as subsystems weren't allowed to
reject process migration on the default hierarchy; unfortunately,
enforcing this policy turned out to be problematic for certain types
of resources - realtime slices for now.

As such, the default hierarchy is gonna allow restricted failures
during migration and to support that this patch makes
cgroup_update_dfl_csses() migrate all target processes atomically
rather than one-by-one.  The preceding patches made subsystems ready
for multi-process migration and factored out taskset operations making
this almost trivial.  All tasks of the target processes are put in the
same taskset and the migration operations are performed once which
either fails or succeeds for all.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NZefan Li <lizefan@huawei.com>

Currently, cgroup_migreate() implements large part of the migration
logic inline including building the target taskset and actually
migrating them.  This patch separates out the following taskset
operations.

 CGROUP_TASKSET_INIT()		: taskset initializer
 cgroup_taskset_add()		: add a task to a taskset
 cgroup_taskset_migrate()	: migrate a taskset to the destination cgroup

This will be used to implement atomic multi-process migration in
cgroup_update_dfl_csses().  This is pure reorganization which doesn't
introduce any functional changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NZefan Li <lizefan@huawei.com>

cgroup_migrate() has the destination cgroup as the first parameter
while cgroup_task_migrate() has the destination cset as the last.
Another migration function is scheduled to be added which can make the
discrepancy further stand out.  Let's reorder cgroup_migrate()'s
parameters so that the destination cgroup is the last.

This doesn't cause any functional difference.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NZefan Li <lizefan@huawei.com>

It wasn't explicitly documented but, when a process is being migrated,
cpuset and memcg depend on cgroup_taskset_first() returning the
threadgroup leader; however, this approach is somewhat ghetto and
would no longer work for the planned multi-process migration.

This patch introduces explicit cgroup_taskset_for_each_leader() which
iterates over only the threadgroup leaders and replaces
cgroup_taskset_first() usages for accessing the leader with it.

This prepares both memcg and cpuset for multi-process migration.  This
patch also updates the documentation for cgroup_taskset_for_each() to
clarify the iteration rules and removes comments mentioning task
ordering in tasksets.

v2: A previous patch which added threadgroup leader test was dropped.
    Patch updated accordingly.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NZefan Li <lizefan@huawei.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>

If memory_migrate flag is set, cpuset migrates memory according to the
destnation css's nodemask.  The current implementation migrates memory
whenever any thread of a process is migrated making the behavior
somewhat arbitrary.  Let's tie memory operations to the threadgroup
leader so that memory is migrated only when the leader is migrated.

While this is a behavior change, given the inherent fuziness, this
change is not too likely to be noticed and allows us to clearly define
who owns the memory (always the leader) and helps the planned atomic
multi-process migration.

Note that we're currently migrating memory in migration path proper
while holding all the locks.  In the long term, this should be moved
out to an async work item.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NZefan Li <lizefan@huawei.com>

cgroup core only recently grew generic notification support.  Wire up
"memory.events" so that it triggers a file modified event whenever its
content changes.

v2: Refreshed on top of mem_cgroup relocation.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NMichal Hocko <mhocko@kernel.org>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Li Zefan <lizefan@huawei.com>

cgroup core handles creations and removals of cgroup interface files
as described by cftypes.  There are cases where the handle for a given
file instance is necessary, for example, to generate a file modified
event.  Currently, this is handled by explicitly matching the callback
method pointer and storing the file handle manually in
cgroup_add_file().  While this simple approach works for cgroup core
files, it can't for controller interface files.

This patch generalizes cgroup interface file handle handling.  struct
cgroup_file is defined and each cftype can optionally tell cgroup core
to store the file handle by setting ->file_offset.  A file handle
remains accessible as long as the containing css is accessible.

Both "cgroup.procs" and "cgroup.events" are converted to use the new
generic mechanism instead of hooking directly into cgroup_add_file().
Also, cgroup_file_notify() which takes a struct cgroup_file and
generates a file modified event on it is added and replaces explicit
kernfs_notify() invocations.

This generalizes cgroup file handle handling and allows controllers to
generate file modified notifications.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>

The file creation / removal path has always been a bit icky and the
planned notification update requires css during file creation.
Restructure as follows.

* cgroup_addrm_files() now takes both @css and @cgrp and is only
  called directly by other file handling functions.

* cgroup_populate/clear_dir() are replaced with
  css_populate/clear_dir() taking @css and @cgrp_override.
  @cgrp_override is used only when files needs to be created on /
  removed from a cgroup which isn't attached to @css which happens
  during subsystem rebinds.  Subsystem loops are moved to the callers.

* cgroup_add_file() now takes both @css and @cgrp.  @css isn't used
  yet but will be used by the planned notification update.

This patch doens't cause any behavior changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>

* Use local variables @scgrp and @dcgrp for @src_root->cgrp and
  @dst_root->cgrp respectively.

* Use initializers to set @src_root and @css in the inner bind loop.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>

After a file creation failure, cgroup_addrm_files() it didn't remove
the files which had already been created.  When cgroup_populate_dir()
is the caller, this is fine as the caller performs cleanup; however,
for other callers, this may leave unactivated dangling files behind.
As kernfs directory removals are recursive, this doesn't lead to
permanent memory leak but it can, for example, fail future attempts to
create those files again.

There's no point in keeping around this sort of subtlety and it gets
in the way of planned updates to file handling.  This patch makes
cgroup_addrm_files() clean up after itself on failures.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>

Move it upwards so that it's right below cgroup_clear_dir() and the
forward declaration is unnecessary.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>

cftype->mode allows controllers to give arbitrary permissions to
interface knobs.  Except for "cgroup.event_control", the existing uses
are spurious.

* Some explicitly specify S_IRUGO | S_IWUSR even though that's the
  default.

* "cpuset.memory_pressure" specifies S_IRUGO while also setting a
  write callback which returns -EACCES.  All it needs to do is simply
  not setting a write callback.

"cgroup.event_control" uses cftype->mode to make the file
world-writable.  It's a misdesigned interface and we don't want
controllers to be tweaking interface file permissions in general.
This patch removes cftype->mode and all its spurious uses and
implements CFTYPE_WORLD_WRITABLE for "cgroup.event_control" which is
marked as compatibility-only.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>

memcg already uses "memory.events" for event reporting and other
controllers may need event reporting too.  Let's standardize on
"$SUBSYS.events" interface file for reporting events which don't
happen too frequently and thus can share event notification.

"cgroup.populated" is replaced with "populated" field in
"cgroup.events" and documentation is updated accordingly.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>

cgroup_on_dfl() tests whether the cgroup's root is the default
hierarchy; however, an individual controller is only interested in
whether the controller is attached to the default hierarchy and never
tests a cgroup which doesn't belong to the hierarchy that the
controller is attached to.

This patch replaces cgroup_on_dfl() tests in controllers with faster
static_key based cgroup_subsys_on_dfl().  This leaves cgroup core as
the only user of cgroup_on_dfl() and the function is moved from the
header file to cgroup.c.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NZefan Li <lizefan@huawei.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>

Replace cgroup_subsys->disabled tests in controllers with
cgroup_subsys_enabled().  cgroup_subsys_enabled() requires literal
subsys name as its parameter and thus can't be used for cgroup core
which iterates through controllers.  For cgroup core, introduce and
use cgroup_ssid_enabled() which uses slower static_key_enabled() test
and can be indexed by subsys ID.

This leaves cgroup_subsys->disabled unused.  Removed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NZefan Li <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>

Whether a subsys is enabled and attached to the default hierarchy
seldom changes and may be tested in the hot paths.  This patch
implements static_key based cgroup_subsys_enabled() and
cgroup_subsys_on_dfl() tests.

The following patches will update the users and remove duplicate
mechanisms.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NZefan Li <lizefan@huawei.com>

static_key_enabled() can be used on struct static_key but not on its
wrapper types static_key_true and static_key_false.  The function is
useful for debugging and management of static keys.  Update it so that
it can be used for the wrapper types too.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>

Note: This commit was originally committed as b5ba75b5 but got
      reverted by f9f9e7b7 due to the performance regression from
      the percpu_rwsem write down/up operations added to cgroup task
      migration path.  percpu_rwsem changes which alleviate the
      performance issue are pending for v4.4-rc1 merge window.
      Re-apply.

Now that threadgroup locking is made global, code paths around it can
be simplified.

* lock-verify-unlock-retry dancing removed from __cgroup_procs_write().

* Race protection against de_thread() removed from
  cgroup_update_dfl_csses().
Signed-off-by: NTejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/g/55F8097A.7000206@de.ibm.com

Note: This commit was originally committed as d59cfc09 but got
      reverted by 0c986253 due to the performance regression from
      the percpu_rwsem write down/up operations added to cgroup task
      migration path.  percpu_rwsem changes which alleviate the
      performance issue are pending for v4.4-rc1 merge window.
      Re-apply.

The cgroup side of threadgroup locking uses signal_struct->group_rwsem
to synchronize against threadgroup changes.  This per-process rwsem
adds small overhead to thread creation, exit and exec paths, forces
cgroup code paths to do lock-verify-unlock-retry dance in a couple
places and makes it impossible to atomically perform operations across
multiple processes.

This patch replaces signal_struct->group_rwsem with a global
percpu_rwsem cgroup_threadgroup_rwsem which is cheaper on the reader
side and contained in cgroups proper.  This patch converts one-to-one.

This does make writer side heavier and lower the granularity; however,
cgroup process migration is a fairly cold path, we do want to optimize
thread operations over it and cgroup migration operations don't take
enough time for the lower granularity to matter.
Signed-off-by: NTejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/g/55F8097A.7000206@de.ibm.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>

This reverts commit d59cfc09.

d59cfc09 ("sched, cgroup: replace signal_struct->group_rwsem with
a global percpu_rwsem") and b5ba75b5 ("cgroup: simplify
threadgroup locking") changed how cgroup synchronizes against task
fork and exits so that it uses global percpu_rwsem instead of
per-process rwsem; unfortunately, the write [un]lock paths of
percpu_rwsem always involve synchronize_rcu_expedited() which turned
out to be too expensive.

Improvements for percpu_rwsem are scheduled to be merged in the coming
v4.4-rc1 merge window which alleviates this issue.  For now, revert
the two commits to restore per-process rwsem.  They will be re-applied
for the v4.4-rc1 merge window.
Signed-off-by: NTejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/g/55F8097A.7000206@de.ibm.comReported-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org # v4.2+

This reverts commit b5ba75b5.

d59cfc09 ("sched, cgroup: replace signal_struct->group_rwsem with
a global percpu_rwsem") and b5ba75b5 ("cgroup: simplify
threadgroup locking") changed how cgroup synchronizes against task
fork and exits so that it uses global percpu_rwsem instead of
per-process rwsem; unfortunately, the write [un]lock paths of
percpu_rwsem always involve synchronize_rcu_expedited() which turned
out to be too expensive.

Improvements for percpu_rwsem are scheduled to be merged in the coming
v4.4-rc1 merge window which alleviates this issue.  For now, revert
the two commits to restore per-process rwsem.  They will be re-applied
for the v4.4-rc1 merge window.
Signed-off-by: NTejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/g/55F8097A.7000206@de.ibm.comReported-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org # v4.2+

Pull CRIS updates from Jesper Nilsson:
 "Mostly removal of old cruft of which we can use a generic version, or
  fixes for code not commonly run in the cris port, but also additions
  to enable some good debug"

* tag 'cris-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris: (25 commits)
  CRISv10: delete unused lib/dmacopy.c
  CRISv10: delete unused lib/old_checksum.c
  CRIS: fix switch_mm() lockdep splat
  CRISv32: enable LOCKDEP_SUPPORT
  CRIS: add STACKTRACE_SUPPORT
  CRISv32: annotate irq enable in idle loop
  CRISv32: add support for irqflags tracing
  CRIS: UAPI: use generic types.h
  CRIS: UAPI: use generic shmbuf.h
  CRIS: UAPI: use generic msgbuf.h
  CRIS: UAPI: use generic socket.h
  CRIS: UAPI: use generic sembuf.h
  CRIS: UAPI: use generic sockios.h
  CRIS: UAPI: use generic auxvec.h
  CRIS: UAPI: use generic headers via Kbuild
  CRIS: UAPI: fix elf.h export
  CRIS: don't make asm/elf.h depend on asm/user.h
  CRIS: UAPI: fix ptrace.h
  CRISv32: Squash compile warnings for axisflashmap
  CRISv32: Add GPIO driver to the default configs
  ...

rq_data_dir() returns either READ or WRITE (0 == READ, 1 == WRITE), not
a boolean value.

Now, admittedly the "!= 0" doesn't really change the value (0 stays as
zero, 1 stays as one), but it's not only redundant, it confuses gcc, and
causes gcc to warn about the construct

    switch (rq_data_dir(req)) {
        case READ:
            ...
        case WRITE:
            ...

that we have in a few drivers.

Now, the gcc warning is silly and stupid (it seems to warn not about the
switch value having a different type from the case statements, but about
_any_ boolean switch value), but in this case the code itself is silly
and stupid too, so let's just change it, and get rid of warnings like
this:

  drivers/block/hd.c: In function ‘hd_request’:
  drivers/block/hd.c:630:11: warning: switch condition has boolean value [-Wswitch-bool]
     switch (rq_data_dir(req)) {

The odd '!= 0' came in when "cmd_flags" got turned into a "u64" in
commit 5953316d ("block: make rq->cmd_flags be 64-bit") and is
presumably because the old code (that just did a logical 'and' with 1)
would then end up making the type of rq_data_dir() be u64 too.

But if we want to retain the old regular integer type, let's just cast
the result to 'int' rather than use that rather odd '!= 0'.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>