- 09 2月, 2010 8 次提交
-
-
由 Jeremy Kerr 提交于
Currently, we're using u32 for cell values, and hence assuming host-endian device trees. As we'd like to support little-endian platforms, use a __be32 for cell values, and convert in the cell accessors. Signed-off-by: NJeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Jeremy Kerr 提交于
At present we're using hard-coded values for defaults when parsing the FDT. This change uses the #defines instead. Signed-off-by: NJeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Jeremy Kerr 提交于
At present, the fdt code sets the kernel-wide initrd_start and initrd_end variables when parsing /chosen. On ARM, we only set these once the bootmem has been reserved. This change adds an arch hook to setup the initrd from the device tree: void early_init_dt_setup_initrd_arch(unsigned long start, unsigned long end); The arch-specific code can then setup the initrd however it likes. Compiled on powerpc, with CONFIG_BLK_DEV_INITRD=y and =n. Signed-off-by: NJeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Jeremy Kerr 提交于
We use a few procfs-specific functions (eg, proc_device_tree_*) which aren't covered by the current includes. This causes the following build error on arm: drivers/of/base.c: In function 'prom_add_property': drivers/of/base.c:861: error: implicit declaration of function 'proc_device_tree_add_prop' drivers/of/base.c: In function 'prom_remove_property': drivers/of/base.c:902: error: implicit declaration of function 'proc_device_tree_remove_prop' drivers/of/base.c: In function 'prom_update_property': drivers/of/base.c:946: error: implicit declaration of function 'proc_device_tree_update_prop' Add proc_fs.h for these prototypes. Signed-off-by: NJeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Grant Likely 提交于
Merge common code between PowerPC and Microblaze architectures. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NMichal Simek <monstr@monstr.eu>
-
由 Grant Likely 提交于
machine is compatible is an OF-specific call. It should have the of_ prefix to protect the global namespace. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NMichal Simek <monstr@monstr.eu>
-
由 Jeremy Kerr 提交于
Merge common function between powerpc, sparc and microblaze. Code is identical for powerpc and microblaze, but adds a lock (and release) of the devtree_lock on sparc. Signed-off-by: NJeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Grant Likely 提交于
Merge common code between PowerPC and Microblaze Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Tested-by: NWolfram Sang <w.sang@pengutronix.de> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 29 1月, 2010 3 次提交
-
-
由 Grant Likely 提交于
In struct device_node, the phandle is named 'linux_phandle' for PowerPC and MicroBlaze, and 'node' for SPARC. There is no good reason for the difference, it is just an artifact of the code diverging over a couple of years. This patch renames both to simply .phandle. Note: the .node also existed in PowerPC/MicroBlaze, but the only user seems to be arch/powerpc/platforms/powermac/pfunc_core.c. It doesn't look like the assignment between .linux_phandle and .node is significantly different enough to warrant the separate code paths unless ibm,phandle properties actually appear in Apple device trees. I think it is safe to eliminate the old .node property and use phandle everywhere. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NDavid S. Miller <davem@davemloft.net> Tested-by: NWolfram Sang <w.sang@pengutronix.de> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Grant Likely 提交于
Merge common code between PowerPC and MicroBlaze Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Tested-by: NWolfram Sang <w.sang@pengutronix.de> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Grant Likely 提交于
Merge common code between PowerPC and Microblaze Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Tested-by: NWolfram Sang <w.sang@pengutronix.de> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 11 12月, 2009 4 次提交
-
-
由 Grant Likely 提交于
Merge common code between PowerPC and Microblaze. This patch splits the arch-specific stuff out into a new function, early_init_dt_scan_chosen_arch(). Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Tested-by: NWolfram Sang <w.sang@pengutronix.de> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Grant Likely 提交于
Merge common code between PowerPC and Microblaze Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: NWolfram Sang <w.sang@pengutronix.de>
-
由 Grant Likely 提交于
Merge common code between PowerPC and Microblaze Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: NWolfram Sang <w.sang@pengutronix.de>
-
由 Grant Likely 提交于
Merge common code between PowerPC and Microblaze Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Tested-by: NWolfram Sang <w.sang@pengutronix.de> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 24 11月, 2009 8 次提交
-
-
由 Grant Likely 提交于
Merge common code between PowerPC and MicroBlaze Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Reviewed-by: NWolfram Sang <w.sang@pengutronix.de> Tested-by: NMichal Simek <monstr@monstr.eu>
-
由 Grant Likely 提交于
Merge common code between PowerPC and MicroBlaze Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Reviewed-by: NWolfram Sang <w.sang@pengutronix.de> Tested-by: NMichal Simek <monstr@monstr.eu>
-
由 Grant Likely 提交于
Merge common code between PowerPC and MicroBlaze Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Reviewed-by: NWolfram Sang <w.sang@pengutronix.de> Tested-by: NMichal Simek <monstr@monstr.eu>
-
由 Grant Likely 提交于
Merge common code between PowerPC and Microblaze Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Reviewed-by: NWolfram Sang <w.sang@pengutronix.de> Tested-by: NMichal Simek <monstr@monstr.eu>
-
由 Grant Likely 提交于
Merge common code between PowerPC and Microblaze Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Reviewed-by: NWolfram Sang <w.sang@pengutronix.de> Tested-by: NMichal Simek <monstr@monstr.eu>
-
由 Grant Likely 提交于
Merge common code between PowerPC and MicroBlaze Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Reviewed-by: NWolfram Sang <w.sang@pengutronix.de> Tested-by: NMichal Simek <monstr@monstr.eu>
-
由 Grant Likely 提交于
Merge common code between PowerPC and Microblaze Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Reviewed-by: NWolfram Sang <w.sang@pengutronix.de> Tested-by: NMichal Simek <monstr@monstr.eu>
-
由 Grant Likely 提交于
Merge common code between Microblaze and PowerPC. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Reviewed-by: NWolfram Sang <w.sang@pengutronix.de> Tested-by: NMichal Simek <monstr@monstr.eu>
-
- 30 10月, 2009 1 次提交
-
-
由 Anton Vorontsov 提交于
Linux power management subsystem supports vast amount of new PM callbacks that are crucial for proper suspend and hibernation support in drivers. This patch implements support for dev_pm_ops, preserving support for legacy callbacks. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 16 10月, 2009 1 次提交
-
-
由 Grant Likely 提交于
Merge common code between Microblaze and PowerPC, and make it available to Sparc Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NWolfram Sang <w.sang@pengutronix.de> Acked-by: NMichal Simek <monstr@monstr.eu> Acked-by: NStephen Neuendorffer <stephen.neuendorffer@xilinx.com> Acked-by: NStephen Rothwell <sfr@canb.auug.org.au>
-
- 15 10月, 2009 1 次提交
-
-
由 Jérôme Pouiller 提交于
Some toolchains dislike nested function definition, so we define function match outside of of_phy_find_device. Signed-off-by: NJérôme Pouiller <jezz@sysmic.org> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 23 9月, 2009 1 次提交
-
-
由 Anton Vorontsov 提交于
The alias isn't needed any longer since the m25p80 driver converted to the module device table matching. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Jean Delvare <khali@linux-fr.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 7月, 2009 1 次提交
-
-
由 Anton Vorontsov 提交于
Fixed-link support is broken for the ucc_eth, gianfar, and fs_enet device drivers. The "OF MDIO rework" patches removed most of the support. Instead of re-adding fixed-link stuff to the drivers, this patch adds a support function for parsing the fixed-link property and obtaining a dummy phy to match. Note: the dummy phy handling in arch/powerpc is a bit of a hack and needs to be reworked. This function is being added now to solve the regression in the Ethernet drivers, but it should be considered a temporary measure until the fixed link handling can be reworked. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 5月, 2009 1 次提交
-
-
由 Michal Simek 提交于
Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
- 19 5月, 2009 1 次提交
-
-
由 Anton Vorontsov 提交于
For serial flash support we need to: - Add QE Par IO Bank E device tree node, a GPIO from this bank is used for SPI chip-select line; - Add serial-flash node; - Add proper module alias into of/base.c. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 27 4月, 2009 2 次提交
-
-
由 Grant Likely 提交于
Add support for parsing the device tree for PHY devices on an MDIO bus. Currently many of the PowerPC ethernet drivers are open coding a solution for reading data out of the device tree to find the correct PHY device. This patch implements a set of common routines to: a) let MDIO bus drivers register phy_devices described in the tree, and b) let MAC drivers find the correct phy_device via the tree. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NAndy Fleming <afleming@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Grant Likely 提交于
of_parse_phandle() is a helper function to read and parse a phandle property and return a pointer to the resulting device_node. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NAndy Fleming <afleming@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 4月, 2009 1 次提交
-
-
由 Anton Vorontsov 提交于
The bindings describes a case where MMC/SD/SDIO slot directly connected to a SPI bus. Such setups are widely used on embedded PowerPC boards. The patch also adds the mmc-spi-slot entry to the OpenFirmware modalias table. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <david-b@pacbell.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 1月, 2009 1 次提交
-
-
由 Jon Smirl 提交于
The of_find_i2c_device_by_node function allows you to follow a reference in the device tree to an i2c device node and then locate the linux device instantiated by the device tree. Example use: an I2S bus driver finding the i2c_device instance for a codec described by a device tree node. This was waiting for Anton's i2c patches that were just added. Signed-off-by: NJon Smirl <jonsmirl@gmail.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 21 12月, 2008 3 次提交
-
-
由 Anton Vorontsov 提交于
This function is used to count how many GPIOs are specified for a device node. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Anton Vorontsov 提交于
Given this list (contains three gpio specifiers, one of which is a hole): gpios = <&phandle1 1 2 3 0 /* a hole */ &phandle2 4 5 6>; of_parse_phandles_with_args() would report -ENOENT for the `hole' specifier item, the same error value is used to report the end of the list, for example. Sometimes we want to differentiate holes from real errors -- for example when we want to count all the [syntax correct] specifiers. With this patch of_parse_phandles_with_args() will report -EEXITS when somebody requested to parse a hole. Also, make the out_{node,args} arguments optional, when counting we don't really need the out values. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Anton Vorontsov 提交于
By using 'list++' in the beginning we can simplify the code a little bit. Suggested-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 03 12月, 2008 2 次提交
-
-
由 Anton Vorontsov 提交于
This adds a new function, of_get_gpio_flags, which is like of_get_gpio(), but accepts a new "flags" argument. This new function will be used by the drivers that need to retrieve additional GPIO information, such as active-low flag. Also, this changes the default ("simple") .xlate routine to warn about bogus (< 2) #gpio-cells usage: the second cell should always be present for GPIO flags. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Anton Vorontsov 提交于
For I2C devices we just setting the node pointer in the archdata. This is needed so that the I2C devices could find their OF tree nodes. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 19 11月, 2008 1 次提交
-
-
由 Michael Ellerman 提交于
This commit adds a routine for finding a device node which has a certain property. The contents of the property are not taken into account, merely the presence or absence of the property. Based on that routine, we add a for_each_ macro for iterating over all nodes that have a certain property. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-