- 30 11月, 2005 3 次提交
-
-
由 Roland Dreier 提交于
ipoib_mcast_alloc() uses kzalloc(), so there's no need to zero out members of the mcast struct after it's allocated. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Michael S. Tsirkin 提交于
Make sure mcast->done is initialized to uncompleted value before we submit a new query, so that it's safe to wait on. Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Always set path->query to NULL when the SA path record query completes, rather than only when we don't have an address handle. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 29 11月, 2005 3 次提交
-
-
由 Roland Dreier 提交于
It's possible that IPoIB will issue multiple SA queries for the same path struct. Therefore the struct's completion needs to be initialized for each query rather than only once when the struct is allocated, or else we might not wait long enough for later queries to finish and free the path struct too soon. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Michael S. Tsirkin 提交于
ib_umad_write in user_mad.c is looking at rmpp_hdr field in MAD before checking that the MAD actually has the RMPP header. So for a MAD without RMPP header it looks like we are actually checking a bit inside M_Key, or something. Signed-off-by: NJack Morgenstein <jackm@mellanox.co.il> Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Michael S. Tsirkin 提交于
last pointer is not updated when QP is modified to reset state. This causes data corruption if WQEs are already posted on the queue. Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 28 11月, 2005 3 次提交
-
-
由 Adrian Bunk 提交于
The Coverity checker spotted this obvious NULL pointer dereference. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NMark Salyzyn <mark_salyzyn@adaptec.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
The Coverity checker spotted this obvious use-after-release bug caused by a wrong order of the cleanups. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
The Coverity checker spotted this obvious NULL pointer dereference. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NMarkus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 26 11月, 2005 7 次提交
-
-
由 Linus Torvalds 提交于
-
由 Trond Myklebust 提交于
In __rpc_purge_upcall (net/sunrpc/rpc_pipe.c), the newer code to clean up the in_upcall list has a typo. Thanks to Vince Busam <vbusam@google.com> for spotting this! Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
In cases where the server has gone insane, nfs_update_inode() may end up calling nfs_invalidate_inode(), which again calls stuff that takes the inode->i_lock that we're already holding. In addition, given the sort of things we have in NFS these days that need to be cleaned up on inode release, I'm not sure we should ever be calling make_bad_inode(). Fix up spinlock recursion, and limit nfs_invalidate_inode() to clearing the caches, and marking the inode as being stale. Thanks to Steve Dickson <SteveD@redhat.com> for spotting this. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
When caching locks due to holding a file delegation, we must always check against local locks before sending anything to the server. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
-
- 25 11月, 2005 11 次提交
-
-
由 David Gibson 提交于
Blah. The patch [0] I recently sent fixing errors with in_hugepage_area() and prepare_hugepage_range() for powerpc itself has an off-by-one bug. Furthermore, the related functions touches_hugepage_*_range() and within_hugepage_*_range() are also buggy. Some of the bugs, like those addressed in [0] originated with commit 7d24f0b8 where we tweaked the semantics of where hugepages are allowed. Other bugs have been there essentially forever, and are due to the undefined behaviour of '<<' with shift counts greater than the type width (LOW_ESID_MASK could return non-zero for high ranges with the right congruences). The good news is that I now have a testsuite which should pick up things like this if they creep in again. [0] "powerpc-fix-for-hugepage-areas-straddling-4gb-boundary" Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
-
由 Stephen Rothwell 提交于
With the removal of include/asm-powerpc, we no longer need arch/powerpc/include/asm for the 64 bit build. We also do not need -Iarch/powerpc for the 64 bit build either. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Nathan Scott 提交于
SGI-PV: 946205 SGI-Modid: xfs-linux-melb:xfs-kern:24567a Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Nathan Scott 提交于
SGI-PV: 941645 SGI-Modid: xfs-linux-melb:xfs-kern:24566a Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Felix Blyakher 提交于
its queue of IO completion callbacks, thus creating the deadlock between umount and xfslogd. Breaking the loop solves the problem. SGI-PV: 943821 SGI-Modid: xfs-linux-melb:xfs-kern:202363a Signed-off-by: NFelix Blyakher <felixb@sgi.com> Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Nathan Scott 提交于
direct write. SGI-PV: 944820 SGI-Modid: xfs-linux-melb:xfs-kern:24351a Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Christoph Hellwig 提交于
SGI-PV: 945483 SGI-Modid: xfs-linux-melb:xfs-kern:201884a Signed-off-by: NChristoph Hellwig <hch@sgi.com> Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Eric Sandeen 提交于
SGI-PV: 945311 SGI-Modid: xfs-linux-melb:xfs-kern:201708a Signed-off-by: NEric Sandeen <sandeen@sgi.com> Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Linus Torvalds 提交于
-
由 Jasper Spaans 提交于
This code fixes a tiny problem with the recent fbcon rotation changes: fb_prepare_logo doesn't check the return value of fb_find_logo and that causes a crash for my while booting. Obvious & working & tested fix is here. Signed-off-by: NJasper Spaans <jasper@vs19.net> Acked-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 24 11月, 2005 13 次提交
-
-
由 Dave Airlie 提交于
A fix for a locking bug which is triggered when a client tries to lock with flag DMA_QUIESCENT (typically the X server), but gets interrupted by a signal. The locking IOCTL should then return an error, but if DMA_QUIESCENT succeeds it returns 0, and the client falsely thinks it has the lock. In addition The client waits for DMA_QUISCENT and possibly DMA_READY without having the lock. From: Thomas Hellstrom Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Nicolas Kaiser 提交于
remove redundant include Signed-off-by: NNicolas Kaiser <nikai@nikai.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
Fix kernel-doc warning in linux/usb.h. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Hrdeman 提交于
On Wed, Nov 16, 2005 at 06:34:24PM -0800, Pete Zaitcev wrote: >On Wed, 16 Nov 2005 23:52:32 +0100, David Hrdeman <david@2gen.com> wrote: >> usb-storage: waiting for device to settle before scanning >> Vendor: I0MEGA Model: UMni1GB*IOM2K4 Rev: 1.01 >> Type: Direct-Access ANSI SCSI revision: 02 >> SCSI device sda: 2048000 512-byte hdwr sectors (1049 MB) >> sda: Write Protect is off >> sda: Mode Sense: 00 00 00 00 >> sda: assuming drive cache: write through >> ioctl_internal_command: <8 0 0 0> return code = 8000002 >> : Current: sense key=0x0 >> ASC=0x0 ASCQ=0x0 >> SCSI device sda: 2048000 512-byte hdwr sectors (1049 MB) > >I think it's harmless. I saw things like that, and initially I plugged >them with workarounds like this: Thanks for the pointer, and yes, it is harmless, but it floods the console with the messages which hides other (potentially important) messages...following your example I've made a patch which fixes the problem. Signed-off-by: NDavid Hrdeman <david@2gen.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Brownell 提交于
This should fix a suspend/resume issues that appear with OHCI on some PPC hardware. The PCI layer should doesn't have the hooks needed for such ASIC-specific hooks (in this case, software clock gating), so this moves the code to do that into hcd-pci.c ... where it can be done after the relevant PCI PM state transition (to/from D3). Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Brownell 提交于
Moving the PCI-specific parts of the EHCI driver into their own file created a few issues ... notably on resume paths which (like swsusp) require re-initializing the controller. This patch: - Splits the EHCI startup code into run-once HCD setup code and separate "init the hardware" reinit code. (That reinit code is a superset of the "early usb handoff" code.) - Then it makes the PCI init code run both, and the resume code only run the reinit code. - It also removes needless pci wrappers around EHCI start/stop methods. - Removes a byteswap issue that would be seen on big-endian hardware. The HCD glue still doesn't actually provide a good way to do all this run-one init stuff in one place though. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Brownell 提交于
This cleans up the recent updates to EHCI PCI support: - Gets rid of checks for "is this a PCI device", they're no longer needed since this is now all PCI-only code. - Reduce log spamming: MWI is only interesting in the atypical case that it can actually be used. - Whitespace cleanup, as appropriate for a new file with no other pending patches. So other than that minor logging change, no functional updates. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Brownell 提交于
This fixes some bugs in EHCI suspend/resume that joined us over the past few releases (as usbcore, PCI, pmcore, and other components evolved): - Removes suspend and resume recursion from the EHCI driver, getting rid of the USB_SUSPEND special casing. - Updates the wakeup mechanism to work again; there's a newish usbcore call it needs to use. - Provide simpler tests for "do we need to restart from scratch", to address another case where PCI Vaux was lost. (In this case it was restoring a swsusp snapshot, but there could be others.) Un-exports a symbol that was temporarily exported. A notable change from previous version is that this doesn't move the spinlock init, so there's still a resume/reinit path bug. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ian Abbott 提交于
This patch adds two new devices to the ftdi_sio driver's device ID table. The device IDs were supplied by Stefan Nies of KOBIL Systems for two of their devices using the FTDI chip. Signed-off-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Damian Wrobel 提交于
This patch solves the following problem I've already discovered on the latest 2.6.15-rc1-git1 kernel: Nov 13 07:37:28 wrobel kernel: Bad page state at free_hot_cold_page (in process 'motion', page c164e020) Nov 13 07:37:28 wrobel kernel: flags:0x40000400 mapping:00000000 mapcount:0 count:0 Nov 13 07:37:28 wrobel kernel: Backtrace: Nov 13 07:37:28 wrobel kernel: [<c0146d86>] bad_page+0x85/0xbe Nov 13 07:37:28 wrobel kernel: [<c0147629>] free_hot_cold_page+0x54/0x129 Nov 13 07:37:28 wrobel kernel: [<c01598c6>] __vunmap+0xa9/0xfe Nov 13 07:37:28 wrobel kernel: [<c0154114>] vmalloc_to_page+0x34/0x55 Nov 13 07:37:28 wrobel kernel: [<c0159942>] vfree+0x27/0x35 Nov 13 07:37:28 wrobel kernel: [<f8a20292>] sn9c102_release_buffers+0x30/0x3f [sn9c102] Nov 13 07:37:28 wrobel kernel: [<f8a231c2>] sn9c102_release+0x37/0xeb [sn9c102] Nov 13 07:37:28 wrobel kernel: [<c0163e74>] __fput+0xa9/0x1aa Nov 13 07:37:28 wrobel kernel: [<c01624f7>] filp_close+0x49/0x6d Nov 13 07:37:30 wrobel kernel: [<c016258f>] sys_close+0x74/0x95 Nov 13 07:37:30 wrobel kernel: [<c0102ef9>] syscall_call+0x7/0xb Nov 13 07:37:31 wrobel kernel: Trying to fix it up, but a reboot is needed Signed-off-by: NDamian Wrobel <dwrobel@ertel.com.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Daniel Marjamäki 提交于
The DBG() call where updated with the appropriate KERN_* symbol. Signed-off-by: NDaniel Marjamki <daniel.marjamaki@comhem.se> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
Fix kernel-doc warning in pci/pci-acpi.c. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-