The offset to add to the hosts monotonic time, kvmclock_offset, is
calculated against the monotonic time at KVM_SET_CLOCK ioctl time.

Request a master clock update at this time, to reduce a potentially
unbounded difference between the values of the masterclock and
the clock value used to calculate kvmclock_offset.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Support for single-step in the emulator (new in 3.12) does not work for
MMIO or PIO writes, because they are completed without returning to
the emulator.  This is not worse than what we had in 3.11; still, add
comments so that the issue is not forgotten.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

These will happen due to MMIO.
Suggested-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

This is the type-safe comparison function, so the double-underscore is
not related.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

The checks on PG_reserved in the page structure on head and tail pages
aren't necessary because split_huge_page wouldn't transfer the
PG_reserved bit from head to tail anyway.

This was a forward-thinking check done in the case PageReserved was
set by a driver-owned page mapped in userland with something like
remap_pfn_range in a VM_PFNMAP region, but using hugepmds (not
possible right now). It was meant to be very safe, but it's overkill
as it's unlikely split_huge_page could ever run without the driver
noticing and tearing down the hugepage itself.

And if a driver in the future will really want to map a reserved
hugepage in userland using an huge pmd it should simply take care of
marking all subpages reserved too to keep KVM safe. This of course
would require such a hypothetical driver to tear down the huge pmd
itself and splitting the hugepage itself, instead of relaying on
split_huge_page, but that sounds very reasonable, especially
considering split_huge_page wouldn't currently transfer the reserved
bit anyway.
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

This is to reserve a capablity number for upcoming support
of H_PUT_TCE_INDIRECT and H_STUFF_TCE pseries hypercalls
which support mulptiple DMA map/unmap operations per one call.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

KVM uses anon_inode_get() to allocate file descriptors as part
of some of its ioctls. But those ioctls are lacking a flag argument
allowing userspace to choose options for the newly opened file descriptor.

In such case it's advised to use O_CLOEXEC by default so that
userspace is allowed to choose, without race, if the file descriptor
is going to be inherited across exec().

This patch set O_CLOEXEC flag on all file descriptors created
with anon_inode_getfd() to not leak file descriptors across exec().
Signed-off-by: NYann Droneaud <ydroneaud@opteya.com>
Link: http://lkml.kernel.org/r/cover.1377372576.git.ydroneaud@opteya.comReviewed-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

KVM uses anon_inode_get() to allocate file descriptors as part
of some of its ioctls. But those ioctls are lacking a flag argument
allowing userspace to choose options for the newly opened file descriptor.

In such case it's advised to use O_CLOEXEC by default so that
userspace is allowed to choose, without race, if the file descriptor
is going to be inherited across exec().

This patch set O_CLOEXEC flag on all file descriptors created
with anon_inode_getfd() to not leak file descriptors across exec().
Signed-off-by: NYann Droneaud <ydroneaud@opteya.com>
Link: http://lkml.kernel.org/r/cover.1377372576.git.ydroneaud@opteya.comReviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

KVM_HC_KICK_CPU  hypercall added to wakeup halted vcpu in paravirtual spinlock
enabled guest.

KVM_FEATURE_PV_UNHALT enables guest to check whether pv spinlock can be enabled
in guest.

Thanks Vatsa for rewriting KVM_HC_KICK_CPU
Cc: Rob Landley <rob@landley.net>
Signed-off-by: NSrivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: NRaghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Acked-by: NGleb Natapov <gleb@redhat.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Note that we are using APIC_DM_REMRD which has reserved usage.
In future if APIC_DM_REMRD usage is standardized, then we should
find some other way or go back to old method.
Suggested-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NRaghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Acked-by: NGleb Natapov <gleb@redhat.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

kvm_hc_kick_cpu allows the calling vcpu to kick another vcpu out of halt state.
the presence of these hypercalls is indicated to guest via
kvm_feature_pv_unhalt.

Fold pv_unhalt flag into GET_MP_STATE ioctl to aid migration
During migration, any vcpu that got kicked but did not become runnable
(still in halted state) should be runnable after migration.
Signed-off-by: NSrivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: NSuzuki Poulose <suzuki@in.ibm.com>
[Raghu: Apic related changes, folding pvunhalted into vcpu_runnable
 Added flags for future use (suggested by Gleb)]
[ Raghu: fold pv_unhalt flag as suggested by Eric Northup]
Signed-off-by: NRaghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Acked-by: NGleb Natapov <gleb@redhat.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

this is needed by both guest and host.

Originally-from: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: NRaghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Acked-by: NGleb Natapov <gleb@redhat.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

We need to use more of the Macros in asm.h to allow kvm_locore.S to
build in a 64-bit kernel.

For 32-bit there is no change in the generated object code.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

There are:
	.set	push
	.set	noreorder
	.set	noat
	 .
	 .
	 .
	.set	pop

Sequences all over the place in this file, but in some places the
final ".set pop" is erroneously converted to ".set push", so none of
these really do what they appear to.

Clean up the whole mess by moving ".set noreorder", ".set noat" to the
top, and get rid of everything else.

Generated object code is unchanged.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

No code changes, just reflowing some comments and consistently using
tabs and spaces.  Object code is verified to be unchanged.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Add decoding for INVEPT and reorder the list according to the reason
numbers.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Advertise VM_EXIT_SAVE_IA32_PAT and VM_EXIT_LOAD_IA32_PAT.
Signed-off-by: NArthur Chunqi Li <yzt356@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Do not report that we can enter the guest in 64-bit mode if the host is
32-bit only. This is not supported by KVM.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

At least WB must be possible.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When asking vmx to load the PAT MSR for us while switching from L1 to L2
or vice versa, we have to update arch.pat as well as it may later be
used again to load or read out the MSR content.
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Tested-by: NArthur Chunqi Li <yzt356@gmail.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Some trivial code cleanups not really related to nested EPT.
Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Signed-off-by: NJun Nakajima <jun.nakajima@intel.com>
Signed-off-by: NXinhao Xu <xinhao.xu@intel.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Some additional comments to preexisting code:
Explain who (L0 or L1) handles EPT violation and misconfiguration exits.
Don't mention "shadow on either EPT or shadow" as the only two options.
Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Signed-off-by: NJun Nakajima <jun.nakajima@intel.com>
Signed-off-by: NXinhao Xu <xinhao.xu@intel.com>
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This is the last patch of the basic Nested EPT feature, so as to allow
bisection through this patch series: The guest will not see EPT support until
this last patch, and will not attempt to use the half-applied feature.
Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Signed-off-by: NJun Nakajima <jun.nakajima@intel.com>
Signed-off-by: NXinhao Xu <xinhao.xu@intel.com>
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

If we let L1 use EPT, we should probably also support the INVEPT instruction.

In our current nested EPT implementation, when L1 changes its EPT table
for L2 (i.e., EPT12), L0 modifies the shadow EPT table (EPT02), and in
the course of this modification already calls INVEPT. But if last level
of shadow page is unsync not all L1's changes to EPT12 are intercepted,
which means roots need to be synced when L1 calls INVEPT. Global INVEPT
should not be different since roots are synced by kvm_mmu_load() each
time EPTP02 changes.
Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Signed-off-by: NJun Nakajima <jun.nakajima@intel.com>
Signed-off-by: NXinhao Xu <xinhao.xu@intel.com>
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM's existing shadow MMU code already supports nested TDP. To use it, we
need to set up a new "MMU context" for nested EPT, and create a few callbacks
for it (nested_ept_*()). This context should also use the EPT versions of
the page table access functions (defined in the previous patch).
Then, we need to switch back and forth between this nested context and the
regular MMU context when switching between L1 and L2 (when L1 runs this L2
with EPT).
Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Signed-off-by: NJun Nakajima <jun.nakajima@intel.com>
Signed-off-by: NXinhao Xu <xinhao.xu@intel.com>
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Inject nEPT fault to L1 guest. This patch is original from Xinhao.
Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NJun Nakajima <jun.nakajima@intel.com>
Signed-off-by: NXinhao Xu <xinhao.xu@intel.com>
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

need_remote_flush() assumes that shadow page is in PT64 format, but
with addition of nested EPT this is no longer always true. Fix it by
bits definitions that depend on host shadow page type.
Reported-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Since nEPT doesn't support A/D bit, so we should not set those bit
when build shadow page table.
Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This is the first patch in a series which adds nested EPT support to KVM's
nested VMX. Nested EPT means emulating EPT for an L1 guest so that L1 can use
EPT when running a nested guest L2. When L1 uses EPT, it allows the L2 guest
to set its own cr3 and take its own page faults without either of L0 or L1
getting involved. This often significanlty improves L2's performance over the
previous two alternatives (shadow page tables over EPT, and shadow page
tables over shadow page tables).

This patch adds EPT support to paging_tmpl.h.

paging_tmpl.h contains the code for reading and writing page tables. The code
for 32-bit and 64-bit tables is very similar, but not identical, so
paging_tmpl.h is #include'd twice in mmu.c, once with PTTTYPE=32 and once
with PTTYPE=64, and this generates the two sets of similar functions.

There are subtle but important differences between the format of EPT tables
and that of ordinary x86 64-bit page tables, so for nested EPT we need a
third set of functions to read the guest EPT table and to write the shadow
EPT table.

So this patch adds third PTTYPE, PTTYPE_EPT, which creates functions (prefixed
with "EPT") which correctly read and write EPT tables.
Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Signed-off-by: NJun Nakajima <jun.nakajima@intel.com>
Signed-off-by: NXinhao Xu <xinhao.xu@intel.com>
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Some guest paging modes do not support A/D bits. Add support for such
modes in shadow page code. For such modes PT_GUEST_DIRTY_MASK,
PT_GUEST_ACCESSED_MASK, PT_GUEST_DIRTY_SHIFT and PT_GUEST_ACCESSED_SHIFT
should be set to zero.
Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch makes guest A/D bits definition to be dependable on paging
mode, so when EPT support will be added it will be able to define them
differently.
Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

For preparation, we just move gpte_access(), prefetch_invalid_gpte(),
s_rsvd_bits_set(), protect_clean_gpte() and is_dirty_gpte() from mmu.c
to paging_tmpl.h.
Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Signed-off-by: NJun Nakajima <jun.nakajima@intel.com>
Signed-off-by: NXinhao Xu <xinhao.xu@intel.com>
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: NJun Nakajima <jun.nakajima@intel.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

kvm_set_cr3() attempts to check if the new cr3 is a valid guest physical
address. The problem is that with nested EPT, cr3 is an *L2* physical
address, not an L1 physical address as this test expects.

As the comment above this test explains, it isn't necessary, and doesn't
correspond to anything a real processor would do. So this patch removes it.

Note that this wrong test could have also theoretically caused problems
in nested NPT, not just in nested EPT. However, in practice, the problem
was avoided: nested_svm_vmexit()/vmrun() do not call kvm_set_cr3 in the
nested NPT case, and instead set the vmcb (and arch.cr3) directly, thus
circumventing the problem. Additional potential calls to the buggy function
are avoided in that we don't trap cr3 modifications when nested NPT is
enabled. However, because in nested VMX we did want to use kvm_set_cr3()
(as requested in Avi Kivity's review of the original nested VMX patches),
we can't avoid this problem and need to fix it.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Signed-off-by: NJun Nakajima <jun.nakajima@intel.com>
Signed-off-by: NXinhao Xu <xinhao.xu@intel.com>
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The existing code for handling cr3 and related VMCS fields during nested
exit and entry wasn't correct in all cases:

If L2 is allowed to control cr3 (and this is indeed the case in nested EPT),
during nested exit we must copy the modified cr3 from vmcs02 to vmcs12, and
we forgot to do so. This patch adds this copy.

If L0 isn't controlling cr3 when running L2 (i.e., L0 is using EPT), and
whoever does control cr3 (L1 or L2) is using PAE, the processor might have
saved PDPTEs and we should also save them in vmcs12 (and restore later).
Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Signed-off-by: NJun Nakajima <jun.nakajima@intel.com>
Signed-off-by: NXinhao Xu <xinhao.xu@intel.com>
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Recent KVM, since http://kerneltrap.org/mailarchive/linux-kvm/2010/5/2/6261577
switch the EFER MSR when EPT is used and the host and guest have different
NX bits. So if we add support for nested EPT (L1 guest using EPT to run L2)
and want to be able to run recent KVM as L1, we need to allow L1 to use this
EFER switching feature.

To do this EFER switching, KVM uses VM_ENTRY/EXIT_LOAD_IA32_EFER if available,
and if it isn't, it uses the generic VM_ENTRY/EXIT_MSR_LOAD. This patch adds
support for the former (the latter is still unsupported).

Nested entry and exit emulation (prepare_vmcs_02 and load_vmcs12_host_state,
respectively) already handled VM_ENTRY/EXIT_LOAD_IA32_EFER correctly. So all
that's left to do in this patch is to properly advertise this feature to L1.

Note that vmcs12's VM_ENTRY/EXIT_LOAD_IA32_EFER are emulated by L0, by using
vmx_set_efer (which itself sets one of several vmcs02 fields), so we always
support this feature, regardless of whether the host supports it.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Signed-off-by: NJun Nakajima <jun.nakajima@intel.com>
Signed-off-by: NXinhao Xu <xinhao.xu@intel.com>
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Current code always uses arch.mmu to check the reserved bits on guest gpte
which is valid only for L1 guest, we should use arch.nested_mmu instead when
we translate gva to gpa for the L2 guest

Fix it by using @mmu instead since it is adapted to the current mmu mode
automatically

The bug can be triggered when nested npt is used and L1 guest and L2 guest
use different mmu mode
Reported-by: NJan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

After commit 21feb4eb tr base is zeroed
during vmexit. Set it to L1's HOST_TR_BASE. This should fix
https://bugzilla.kernel.org/show_bug.cgi?id=60679Reported-by: NYongjie Ren <yongjie.ren@intel.com>
Reviewed-by: NArthur Chunqi Li <yzt356@gmail.com>
Tested-by: NYongjie Ren <yongjie.ren@intel.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

During nested vmentry into vm86 mode a vcpu state is found to be incorrect
because rflags does not have VM flag set since it is read from the cache
and has L1's value instead of L2's. If emulate_invalid_guest_state=1 L0
KVM tries to emulate it, but emulation does not work for nVMX and it
never should happen anyway. Fix that by using vmx_set_rflags() to set
rflags during nested vmentry which takes care of updating register cache.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Current common code uses PAGE_OFFSET to indicate a bad host virtual address.
As this check won't work on architectures that don't map kernel and user memory
into the same address space (e.g. s390), such architectures can now provide
their own KVM_HVA_ERR_BAD defines.
Signed-off-by: NDominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Introduced a helper function for setting the CC in the
guest PSW to improve the readability of the code.
Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>