When write_gid function needs to do a sleep-able operation, it unlocks
table->rwlock and then relocks it. Sparse complains about context
imbalance.

This is safe as write_gid is always called with table->rwlock.
write_gid protects from simultaneous writes to this GID entry
by setting the GID_TABLE_ENTRY_INVALID flag.

Fixes: 9c584f04 ('IB/core: Change per-entry lock in RoCE GID table to
		     one lock')
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Port number is not part of ClassPortInfo attribute but is
still needed as a parameter when invoking process_mad.

To properly handle this attribute, port_num is added as a
parameter to get_counter_table and get_perf_mad was changed
not to store port_num in the attribute itself when it's
querying the ClassPortInfo attribute.

This handles issue pointed out by Matan Barak <matanb@dev.mellanox.co.il>

Fixes: 145d9c54 ('IB/core: Display extended counter set if available')
Signed-off-by: NHal Rosenstock <hal@mellanox.com>
Acked-by: NMatan Barak <matanb@mellanox.com>
Acked-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NChristoph Lameter <cl@linux.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Detected this by building the IB core with W=1. See also patch
"IB core: Fix ib_sg_to_pages()" (commit 8f5ba10e).
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: NLeon Romanovsky <leon.romanovsky@mellanox.com>
Acked-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Fix static checker warning:
        drivers/infiniband/hw/mlx5/main.c:149 mlx5_query_port_roce()
        warn: passing casted pointer '&props->qkey_viol_cntr' to
	'mlx5_query_nic_vport_qkey_viol_cntr()' 32 vs 16.

Fixes: 3f89a643 ("IB/mlx5: Extend query_device/port to support RoCE")
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Remove the local workqueue to process mad completions and use the CQ API
instead.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHal Rosenstock <hal@mellanox.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Stop abusing wr_id and just pass the parameter explicitly.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHal Rosenstock <hal@mellanox.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Use eth_zero_addr to assign the zero address to the given address
array instead of memset when second argument is address of zero.
Signed-off-by: NLucas Tanure <tanure@linux.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Fix the following sparse warning:
drivers/infiniband/hw/mlx5/main.c:1061:29: warning: symbol 'pfn' shadows
an earlier one
drivers/infiniband/hw/mlx5/main.c:1030:21: originally declared here

Fixes: d69e3bcf ('IB/mlx5: Mmap the HCA's core clock register to user-space')
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The macro mlx4_foreach_non_ib_transport_port() is not used anywhere. Remove it.

Fixes: aa9a2d51 ("mlx4: Activate RoCE/SRIOV")
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In commit dbf727de ("IB/core: Use GID table in AH creation and dmac
resolution") we copy source mac to mlx4_ah from the attributes of
gid at ib_ah_attr.grh.sgid_index. Now we can use it.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Hop limit value wasn't copied from attributes  when ah was created.
This may influence packets for unconnected services to get dropped in
routers when endpoints are not in the same subnet.

Fixes: fa417f7b ("IB/mlx4: Add support for IBoE")
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Maximum number of EQE capacity per CQ was mistakenly exposed
as CQE. Fix that.

Fixes: 938fe83c ("net/mlx5_core: New device capabilities handling")
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The h/w is designed in such a way that, if you do anything IPv6
related, a valid clip entry must be there. So take clip reference
before creating IPv6 listening servers, and then if we fail to
create server, release the clip entry.
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Acked-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Commit c5dfb000 ("iw_cxgb4: Pass qid range to user space driver")
from Dec 11, 2015, leads to the following static checker warning:

	drivers/infiniband/hw/cxgb4/device.c:857 c4iw_rdev_open()
        warn: variable dereferenced before check 'rdev->status_page'

Also we weren't deallocating ocqp pool in error path when failed to
allocate status page. Fixing it too.

Fixes: c5dfb000 ("iw_cxgb4: Pass qid range to user space driver")
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The issue here is that there is a cut and paste bug.  When we allocate
cma_dev_group->default_ports_group we use "sizeof(*cma_dev_group->ports)"
instead of "sizeof(*cma_dev_group->default_ports_group)".

We're bumping up against the 80 character limit so I introduced a new
local pointer "ports_group" to get around that.

Fixes: 045959db ('IB/cma: Add configfs for rdma_cm')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

nes_reg_phys_mr() returns ERR_PTRs on error.  It doesn't return NULL.

This bug has been there for a while, but we recently changed from
calling a function pointer to calling nes_reg_phys_mr() directly so now
Smatch is able to detect the bug.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The current code is problematic when the QP creation and ipoib is used to
support NFS and NFS desires to do IO for paging purposes. In that case, the
GFP_KERNEL allocation in qib_qp.c causes a deadlock in tight memory
situations.

This fix adds support to create queue pair with GFP_NOIO flag for connected
mode only to cleanly fail the create queue pair in those situations.

Cc: <stable@vger.kernel.org> # 3.16+
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NVinit Agnihotri <vinit.abhay.agnihotri@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Attributed ID was declared as an int while the value should really be big
endian 16.

Fixes: 35c4cbb1 ("IB/core: Create get_perf_mad function in sysfs.c")
Reported-by: NBart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NChristoph Lameter <cl@linux.com>
Reviewed-by: NHal Rosenstock <hal@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Recently Dough Ledford reported a deadlock happening
between ocrdma-load sequence and NetworkManager service
issueing "open" on be2net interface.

The deadlock happens when any be2net hook (e.g. open/close) is called
in parallel to insmod ocrdma.ko.

A. be2net is sending administrative open/close event to ocrdma holding
   device_list_mutex. It does this from ndo_open/ndo_stop hooks of be2net.
   So sequence of locks is rtnl_lock---> device_list lock

B.  When new ocrdma roce device gets registered, infiniband stack now
    takes rtnl_lock in ib_register_device() in GID initialization routines.
    So sequence of locks in this path is device_list lock ---> rtnl_lock.

This improper locking sequence causes deadlock.

In order to resolve the above deadlock condition, ocrdma intorduced a
patch to stop listening to administrative open/close events generated from
be2net driver. It now depends on link-state-change async-event generated from
CNA. This change leaves behind dead code which used to generate administrative
open/close events. This patch cleans-up all that dead code from be2net.
Reported-by: NDoug Ledford <dledford@redhat.com>
CC: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@avagotech.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@avagotech.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Recently Dough Ledford reported a deadlock happening
between ocrdma-load sequence and NetworkManager service
issuing "open" on be2net interface.

The deadlock happens when any be2net hook (e.g. open/close) is called
in parallel to insmod ocrdma.ko.

A. be2net is sending administrative open/close event to ocrdma holding
   device_list_mutex. It does this from ndo_open/ndo_stop hooks of be2net.
   So sequence of locks is rtnl_lock---> device_list lock

B.  When new ocrdma roce device gets registered, infiniband stack now
    takes rtnl_lock in ib_register_device() in GID initialization routines.
    So sequence of locks in this path is device_list lock ---> rtnl_lock.

This improper locking sequence causes deadlock.

With this patch we stop using administrative open and close events
injected by be2net driver. These events were used to dispatch PORT_ACTIVE
and PORT_ERROR events to the IB-stack. This patch implements a logic
to receive async-link-events generated from CNA whenever link-state-change
is detected. Now on, these async-events will be used to dispatch
PORT_ACTIVE and PORT_ERROR events to IB-stack.

Depending on async-events from CNA removes the need to hold device-list-mutex
and thus breaks the busy-wait scenario.
Reported-by: NDoug Ledford <dledford@redhat.com>
CC: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@avagotech.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@avagotech.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Dispatch only port event to IB stack when port state changes.
Don't explicitly modify qps to error. Let application listen to
port events on async event queue or let QP fail with retry-exceeded
completion error.
Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@avagotech.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

vlan-id is wrongly getting as 0 when PFC is enabled.
Set vlan-id configured by user in QP parameters.
In case vlan interface is not used, flash a warning to
user to configure vlan and assign vlan-id as 0 in qp params.

Fixes: dbf727de ('IB/core: Use GID table in AH creation and dmac resolution')
Cc: Matan Barak <matanb@mellanox.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

cma_validate_port wrongly assumed that Ethernet devices are RoCE
devices and thus their ndev should be matched in the GID table.
This broke the iWarp support. Fixing that matching the ndev only if
we work on a RoCE port.

Cc: <stable@vger.kernel.org> # 4.4.x-
Fixes: abae1b71 ('IB/cma: cma_validate_port should verify the port
		     and netdevice')
Reported-by: NHariprasad Shenai <hariprasad@chelsio.com>
Tested-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The code produces the following trace:

[1750924.419007] general protection fault: 0000 [#3] SMP
[1750924.420364] Modules linked in: nfnetlink autofs4 rpcsec_gss_krb5 nfsv4
dcdbas rfcomm bnep bluetooth nfsd auth_rpcgss nfs_acl dm_multipath nfs lockd
scsi_dh sunrpc fscache radeon ttm drm_kms_helper drm serio_raw parport_pc
ppdev i2c_algo_bit lpc_ich ipmi_si ib_mthca ib_qib dca lp parport ib_ipoib
mac_hid ib_cm i3000_edac ib_sa ib_uverbs edac_core ib_umad ib_mad ib_core
ib_addr tg3 ptp dm_mirror dm_region_hash dm_log psmouse pps_core
[1750924.420364] CPU: 1 PID: 8401 Comm: python Tainted: G D
3.13.0-39-generic #66-Ubuntu
[1750924.420364] Hardware name: Dell Computer Corporation PowerEdge
860/0XM089, BIOS A04 07/24/2007
[1750924.420364] task: ffff8800366a9800 ti: ffff88007af1c000 task.ti:
ffff88007af1c000
[1750924.420364] RIP: 0010:[<ffffffffa0131d51>] [<ffffffffa0131d51>]
qib_mcast_qp_free+0x11/0x50 [ib_qib]
[1750924.420364] RSP: 0018:ffff88007af1dd70  EFLAGS: 00010246
[1750924.420364] RAX: 0000000000000001 RBX: ffff88007b822688 RCX:
000000000000000f
[1750924.420364] RDX: ffff88007b822688 RSI: ffff8800366c15a0 RDI:
6764697200000000
[1750924.420364] RBP: ffff88007af1dd78 R08: 0000000000000001 R09:
0000000000000000
[1750924.420364] R10: 0000000000000011 R11: 0000000000000246 R12:
ffff88007baa1d98
[1750924.420364] R13: ffff88003ecab000 R14: ffff88007b822660 R15:
0000000000000000
[1750924.420364] FS:  00007ffff7fd8740(0000) GS:ffff88007fc80000(0000)
knlGS:0000000000000000
[1750924.420364] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[1750924.420364] CR2: 00007ffff597c750 CR3: 000000006860b000 CR4:
00000000000007e0
[1750924.420364] Stack:
[1750924.420364]  ffff88007b822688 ffff88007af1ddf0 ffffffffa0132429
000000007af1de20
[1750924.420364]  ffff88007baa1dc8 ffff88007baa0000 ffff88007af1de70
ffffffffa00cb313
[1750924.420364]  00007fffffffde88 0000000000000000 0000000000000008
ffff88003ecab000
[1750924.420364] Call Trace:
[1750924.420364]  [<ffffffffa0132429>] qib_multicast_detach+0x1e9/0x350
[ib_qib]
[1750924.568035]  [<ffffffffa00cb313>] ? ib_uverbs_modify_qp+0x323/0x3d0
[ib_uverbs]
[1750924.568035]  [<ffffffffa0092d61>] ib_detach_mcast+0x31/0x50 [ib_core]
[1750924.568035]  [<ffffffffa00cc213>] ib_uverbs_detach_mcast+0x93/0x170
[ib_uverbs]
[1750924.568035]  [<ffffffffa00c61f6>] ib_uverbs_write+0xc6/0x2c0 [ib_uverbs]
[1750924.568035]  [<ffffffff81312e68>] ? apparmor_file_permission+0x18/0x20
[1750924.568035]  [<ffffffff812d4cd3>] ? security_file_permission+0x23/0xa0
[1750924.568035]  [<ffffffff811bd214>] vfs_write+0xb4/0x1f0
[1750924.568035]  [<ffffffff811bdc49>] SyS_write+0x49/0xa0
[1750924.568035]  [<ffffffff8172f7ed>] system_call_fastpath+0x1a/0x1f
[1750924.568035] Code: 66 2e 0f 1f 84 00 00 00 00 00 31 c0 5d c3 66 2e 0f 1f
84 00 00 00 00 00 66 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb 48 8b 7f 10
<f0> ff 8f 40 01 00 00 74 0e 48 89 df e8 8e f8 06 e1 5b 5d c3 0f
[1750924.568035] RIP  [<ffffffffa0131d51>] qib_mcast_qp_free+0x11/0x50
[ib_qib]
[1750924.568035]  RSP <ffff88007af1dd70>
[1750924.650439] ---[ end trace 73d5d4b3f8ad4851 ]

The fix is to note the qib_mcast_qp that was found.   If none is found, then
return EINVAL indicating the error.

Cc: <stable@vger.kernel.org>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reported-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

ipoib_mcast_restart_task calls ipoib_mcast_remove_list with the
parameter mcast->dev. That mcast is a temporary (used as an iterator)
variable that may be uninitialized.
There is no need to send the variable dev to the function, as each mcast
has its dev as a member in the mcast struct.

This causes the next panic:
RIP: 0010: ipoib_mcast_leave+0x6d/0xf0 [ib_ipoib]
RSP: 0018: EFLAGS: 00010246
RAX: f0201 RBX: 24e00 RCX: 00000
....
....
Stack:
Call Trace:
	ipoib_mcast_remove_list+0x3a/0x70 [ib_ipoib]
	ipoib_mcast_restart_task+0x3bb/0x520 [ib_ipoib]
	process_one_work+0x164/0x470
	worker_thread+0x11d/0x420
	...

Fixes: 5a0e81f6 ('IB/IPoIB: factor out common multicast list removal code')
Signed-off-by: NErez Shitrit <erezsh@mellanox.com>
Reported-by: NDoron Tsur <doront@mellanox.com>
Reviewed-by: NChristoph Lameter <cl@linux.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Declare that we support remote invalidation in case we are:
1. using fastreg method
2. always registering memory

Detect the invalidated rkey from the work completion info so we
won't invalidate it locally. The spec mandates that we must not rely
on the target remote invalidate our rkey so we must check it upon
a receive (scsi response) completion.
Signed-off-by: NJenny Derzhavetz <jennyf@mellanox.com>
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When we enable remote invalidate support we won't want to perform
local invalidates at the same time we do today, but we still need
to get new rkeys.  So, decouple the rkey update from the local
invalidate and tie it to memory reg instead.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NJenny Derzhavetz <jennyf@mellanox.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

We'll use remote invalidate, according to negotiation result
during connection establishment. If the initiator declared that
it supports the remote invalidate exception and the local HCA
supports IB_DEVICE_MEM_MGT_EXTENSIONS then the target will
use IB_WR_SEND_WITH_INV with the correct rkey for the response.
Signed-off-by: NJenny Derzhavetz <jennyf@mellanox.com>
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

iser target does not support zero based virtual addresses and
send with invalidate, so it should declare that it doesn't.
Signed-off-by: NJenny Derzhavetz <jennyf@mellanox.com>
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

We don't need iser_proto.h anymore, remove it and
move (non-protocol) declarations to ib_isert.h
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NJenny Derzhavetz <jennyf@mellanox.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The iser RDMA_CM negotiation protocol is shared by
the initiator and the target, so have a shared header
for the defines and structure. Move relevant items from
the initiator and target headers.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NJenny Derzhavetz <jennyf@mellanox.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This parameter is described as "is mr valid indicator".
In other words, it indicates whether memory registration
is valid or not. So intuitive values would be:
mr_valid=True, when memory registration is valid and
mr_valid=False otherwise.
Signed-off-by: NJenny Derzhavetz <jennyf@mellanox.com>
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When all the task data is sent as immediate data, we are
allowed to use the local_dma_lkey as it is not sent to
the wire.
Signed-off-by: NJenny Derzhavetz <jennyf@mellanox.com>
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

We have in iser iser_sg_to_page_vec which has exactly
the same role as ib_sg_to_pages. Customize the page_vec
to hold a fake MR so we can reuse ib_sg_to_pages.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Destroy workqueue on transport register error, also
release kmem cache on workqueue allocation error.
Signed-off-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This mmu_notifier_ops structure is never modified, so declare it as
const, like the other mmu_notifier_ops structures.

Done with the help of Coccinelle.
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The iser_reg_ops structures are never modified, so declare them as const.

Done with the help of Coccinelle.
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Acked-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The nes_cm_ops structure is never modified, so declare it as const.

Done with the help of Coccinelle.
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch will report the tx/rx checksum cap for raw qp via the
query device results.
Signed-off-by: NBodong Wang <bodong@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>