- 06 9月, 2012 1 次提交
-
-
由 Marcelo Tosatti 提交于
Introducing kvm_arch_flush_shadow_memslot, to invalidate the translations of a single memory slot. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 26 7月, 2012 2 次提交
-
-
由 Cornelia Huck 提交于
Introduce a new trace system, kvm-s390, for some kvm/s390 specific trace points: - injection of interrupts - delivery of interrupts to the guest - creation/destruction of kvm machines and vcpus - stop actions for vcpus - reset requests for userspace Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Cornelia Huck 提交于
Add trace events for several s390 architecture specifics: - SIE entry/exit - common intercepts - common instructions (sigp/diagnose) Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 20 7月, 2012 1 次提交
-
-
由 Heiko Carstens 提交于
Remove the file name from the comment at top of many files. In most cases the file name was wrong anyway, so it's rather pointless. Also unify the IBM copyright statement. We did have a lot of sightly different statements and wanted to change them one after another whenever a file gets touched. However that never happened. Instead people start to take the old/"wrong" statements to use as a template for new files. So unify all of them in one go. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
- 14 6月, 2012 1 次提交
-
-
由 Christian Borntraeger 提交于
The initial cpu reset sets the cpu in the stopped state. Several places check for the cpu state (e.g. sigp set prefix) and not setting the STOPPED state triggered errors with newer guest kernels after reboot. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 18 5月, 2012 4 次提交
-
-
由 Jason J. herne 提交于
Enhance the KVM ONE_REG capability within S390 to allow getting/setting the following special cpu registers: clock comparator and the cpu timer. These are needed for migration. Signed-off-by: NJason J. herne <jjherne@us.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Carsten Otte 提交于
This patch makes vcpu epoch difference and the TOD programmable field accessible from userspace. This is needed in order to implement a couple of instructions that deal with the time of day clock on s390, such as SET CLOCK and for migration. Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Carsten Otte 提交于
This patch enables KVM_CAP_ONE_REG for s390 and implements stubs for KVM_GET/SET_ONE_REG. This is based on the ppc implementation. Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Christian Borntraeger 提交于
Currently qemu/kvm on s390 uses a guest mapping that does not allow the guest backing page table to be write-protected to support older systems. On those older systems a host write protection fault will be delivered to the guest. Newer systems allow to write-protect the guest backing memory and let the fault be delivered to the host, thus allowing COW. Use a capability bit to tell qemu if that is possible. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 03 5月, 2012 1 次提交
-
-
由 Christian Borntraeger 提交于
Let userspace know the number of max and supported cpus for kvm on s390. Return KVM_MAX_VCPUS (currently 64) for both values. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 01 5月, 2012 1 次提交
-
-
由 Konstantin Weitz 提交于
This patch implements the directed yield hypercall found on other System z hypervisors. It delegates execution time to the virtual cpu specified in the instruction's parameter. Useful to avoid long spinlock waits in the guest. Christian Borntraeger: moved common code in virt/kvm/ Signed-off-by: NKonstantin Weitz <WEITZKON@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 08 4月, 2012 1 次提交
-
-
由 Christoffer Dall 提交于
The kvm_vcpu_kick function performs roughly the same funcitonality on most all architectures, so we shouldn't have separate copies. PowerPC keeps a pointer to interchanging waitqueues on the vcpu_arch structure and to accomodate this special need a __KVM_HAVE_ARCH_VCPU_GET_WQ define and accompanying function kvm_arch_vcpu_wq have been defined. For all other architectures this is a generic inline that just returns &vcpu->wq; Acked-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NChristoffer Dall <c.dall@virtualopensystems.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 29 3月, 2012 1 次提交
-
-
由 David Howells 提交于
Disintegrate asm/system.h for S390. Signed-off-by: NDavid Howells <dhowells@redhat.com> cc: linux-s390@vger.kernel.org
-
- 08 3月, 2012 3 次提交
-
-
由 Takuya Yoshikawa 提交于
Some members of kvm_memory_slot are not used by every architecture. This patch is the first step to make this difference clear by introducing kvm_memory_slot::arch; lpage_info is moved into it. Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Christian Borntraeger 提交于
There are several cases were we need the control registers for userspace. Lets also provide those in kvm_run. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Christian Borntraeger 提交于
commit 7eef87dc (KVM: s390: fix register setting) added a load of the floating point control register to the KVM_SET_FPU path. Lets make sure that the fpc is valid. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 05 3月, 2012 14 次提交
-
-
由 Christian Borntraeger 提交于
This patch adds the access registers to the kvm_run structure. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Christian Borntraeger 提交于
This patch adds the general purpose registers to the kvm_run structure. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Christian Borntraeger 提交于
Add the prefix register to the synced register field in kvm_run. While we need the prefix register most of the time read-only, this patch also adds handling for guest dirtying of the prefix register. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Christian Borntraeger 提交于
There are several places in the kvm module, which set the prefix register. Since we need to flush the cpu, lets combine this operation into a helper function. This helper will also explicitely mask out the unused bits. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Carsten Otte 提交于
This patch fixes the return code of kvm_arch_vcpu_ioctl in case of an unkown ioctl number. Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Carsten Otte 提交于
This patch announces a new capability KVM_CAP_S390_UCONTROL that indicates that kvm can now support virtual machines that are controlled by userspace. Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Carsten Otte 提交于
This patch makes sure user controlled virtual machines do not use a system control area (sca). This is needed in order to create virtual machines with more cpus than the size of the sca [64]. Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Carsten Otte 提交于
This patch allows the user to fault in pages on a virtual cpus address space for user controlled virtual machines. Typically this is superfluous because userspace can just create a mapping and let the kernel's page fault logic take are of it. There is one exception: SIE won't start if the lowcore is not present. Normally the kernel takes care of this [handle_validity() in arch/s390/kvm/intercept.c] but since the kernel does not handle intercepts for user controlled virtual machines, userspace needs to be able to handle this condition. Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Carsten Otte 提交于
This patch disables the in-kernel interrupt stack for KVM virtual machines that are controlled by user. Userspace has to take care of handling interrupts on its own. Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Carsten Otte 提交于
This patch disables in-kernel handling of SIE intercepts for user controlled virtual machines. All intercepts are passed to userspace via KVM_EXIT_SIE exit reason just like SIE intercepts that cannot be handled in-kernel for regular KVM guests. Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Carsten Otte 提交于
This patch exports the s390 SIE hardware control block to userspace via the mapping of the vcpu file descriptor. In order to do so, a new arch callback named kvm_arch_vcpu_fault is introduced for all architectures. It allows to map architecture specific pages. Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Carsten Otte 提交于
This patch introduces a new exit reason in the kvm_run structure named KVM_EXIT_S390_UCONTROL. This exit indicates, that a virtual cpu has regognized a fault on the host page table. The idea is that userspace can handle this fault by mapping memory at the fault location into the cpu's address space and then continue to run the virtual cpu. Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Carsten Otte 提交于
This patch introduces two ioctls for virtual cpus, that are only valid for kernel virtual machines that are controlled by userspace. Each virtual cpu has its individual address space in this mode of operation, and each address space is backed by the gmap implementation just like the address space for regular KVM guests. KVM_S390_UCAS_MAP allows to map a part of the user's virtual address space to the vcpu. Starting offset and length in both the user and the vcpu address space need to be aligned to 1M. KVM_S390_UCAS_UNMAP can be used to unmap a range of memory from a virtual cpu in a similar way. Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Carsten Otte 提交于
This patch introduces a new config option for user controlled kernel virtual machines. It introduces a parameter to KVM_CREATE_VM that allows to set bits that alter the capabilities of the newly created virtual machine. The parameter is passed to kvm_arch_init_vm for all architectures. The only valid modifier bit for now is KVM_VM_S390_UCONTROL. This requires CAP_SYS_ADMIN privileges and creates a user controlled virtual machine on s390 architectures. Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 17 11月, 2011 3 次提交
-
-
由 Christian Borntraeger 提交于
KVM on s390 always had a sync mmu. Any mapping change in userspace mapping was always reflected immediately in the guest mapping. - In older code the guest mapping was just an offset - In newer code the last level page table is shared Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Cornelia Huck 提交于
SIGP sense running may cause an intercept on higher level virtualization, so handle it by checking the CPUSTAT_RUNNING flag. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Cornelia Huck 提交于
CPUSTAT_RUNNING was implemented signifying that a vcpu is not stopped. This is not, however, what the architecture says: RUNNING should be set when the host is acting on the behalf of the guest operating system. CPUSTAT_RUNNING has been changed to be set in kvm_arch_vcpu_load() and to be unset in kvm_arch_vcpu_put(). For signifying stopped state of a vcpu, a host-controlled bit has been used and is set/unset basically on the reverse as the old CPUSTAT_RUNNING bit (including pushing it down into stop handling proper in handle_stop()). Cc: stable@kernel.org Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 30 10月, 2011 5 次提交
-
-
由 Christian Borntraeger 提交于
Linux on System z uses a ballooner based on diagnose 0x10. (aka as collaborative memory management). This patch implements diagnose 0x10 on the guest address space. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Christian Ehrhardt 提交于
Implement sigp external call, which might be required for guests that issue an external call instead of an emergency signal for IPI. This fixes an issue with "KVM: unknown SIGP: 0x02" when booting such an SMP guest. Signed-off-by: NChristian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Carsten Otte 提交于
KVM common code does vcpu_load prior to calling our arch ioctls and vcpu_put after we're done here. Via the kvm_arch_vcpu_load/put callbacks we do load the fpu and access register state into the processor, which saves us moving the state on every SIE exit the kernel handles. However this breaks register setting from userspace, because of the following sequence: 1a. vcpu load stores userspace register content 1b. vcpu load loads guest register content 2. kvm_arch_vcpu_ioctl_set_fpu/sregs updates saved guest register content 3a. vcpu put stores the guest registers and overwrites the new content 3b. vcpu put loads the userspace register set again This patch loads the new guest register state into the cpu, so that the correct (new) set of guest registers will be stored in step 3a. Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Carsten Otte 提交于
This patch fixes the return value of kvm_arch_init_vm in case a memory allocation goes wrong. Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Carsten Otte 提交于
We use the cpu id provided by userspace as array index here. Thus we clearly need to check it first. Ooops. CC: <stable@vger.kernel.org> Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 20 9月, 2011 2 次提交
-
-
由 Christian Borntraeger 提交于
598841ca ([S390] use gmap address spaces for kvm guest images) changed kvm on s390 to use a separate address space for kvm guests. We can now put KVM guests anywhere in the user address mode with a size up to 8PB - as long as the memory is 1MB-aligned. This change was done without KVM extension capability bit. The change was added after 3.0, but we still have a chance to add a feature bit before 3.1 (keeping the releases in a sane state). We use number 71 to avoid collisions with other pending kvm patches as requested by Alexander Graf. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Acked-by: NAvi Kivity <avi@redhat.com> Cc: Alexander Graf <agraf@suse.de> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Christian Borntraeger 提交于
598841ca ([S390] use gmap address spaces for kvm guest images) changed kvm to use a separate address space for kvm guests. This address space was switched in __vcpu_run In some cases (preemption, page fault) there is the possibility that this address space switch is lost. The typical symptom was a huge amount of validity intercepts or random guest addressing exceptions. Fix this by doing the switch in sie_loop and sie_exit and saving the address space in the gmap structure itself. Also use the preempt notifier. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Acked-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-