These values are never quite useful for dynamic allocations of the page
tables. Getting rid of them will help prevent later confusion.

v2: Updated to use unmap_and_free_pd functions.
v3: Updated gen8_ppgtt_free after teardown logic was removed.
v4: Rebase after s/page_tables/page_table/.
v5: Keep allocating all page directories in GEN8+ systems with less
than 4GB of memory. Updated gen6_for_all_pdes.
v6: Prevent (harmless) out of range access in gen6_for_all_pdes.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+)
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is just so that I don't have to read about the batch pool on
systems that are not using it! Rather than using a newline between the
kernel clients and userspace clients, just distinguish the internal
allocations with a '[k]'
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Since we use obj->active as a hint in many places throughout the code,
knowing its state in debugfs is extremely useful.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Now with the trimmed memcpy before the command parser, we try to
allocate many different sizes of batches, predominantly one or two
pages. We can therefore speed up searching for a good sized batch by
keeping the objects of buckets of roughly the same size.

v2: Add a comment about bucket sizes
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

I woke up one morning and found 50k objects sitting in the batch pool
and every search seemed to iterate the entire list... Painting the
screen in oils would provide a more fluid display.

One issue with the current design is that we only check for retirements
on the current ring when preparing to submit a new batch. This means
that we can have thousands of "active" batches on another ring that we
have to walk over. The simplest way to avoid that is to split the pools
per ring and then our LRU execution ordering will also ensure that the
inactive buffers remain at the front.

v2: execlists still requires duplicate code.
v3: execlists requires more duplicate code
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

With boosting for missed pageflips, we have a much stronger indication
of when we need to (temporarily) boost GPU frequency to ensure smooth
delivery of frames. So now only allow each client to perform one RPS boost
in each period of GPU activity due to stalling on results.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Deepak S <deepak.s@linux.intel.com>
Reviewed-by: NDeepak S <deepak.s@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Occasionally it would be interesting to read some of the DPCD registers
for debug purposes, without having to resort to logging. Add an i915
specific i915_dpcd debugfs file for DP and eDP connectors to dump parts
of the DPCD. Currently the DPCD addresses to be dumped are statically
configured, and more can be added trivially.

The implementation also makes it relatively easy to add other i915 and
connector specific debugfs files in the future, as necessary.

This is currently i915 specific just because there's no generic way to
do AUX transactions given just a drm_connector. However it's all pretty
straightforward to port to other drivers.

v2: Add more DPCD registers to dump.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NBob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Count the number of requests in a ring for the user and show who
submitted them.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When we idle, we set the GPU frequency to the hardware minimum (not user
minimum). We introduce a new variable to distinguish between the
different roles, and to allow easy tuning of the idle frequency without
impacting over aspects of RPS. Setting the minimum frequency should be a
safety blanket as the pcu on the GPU should be power gating itself
anyway. However, in order for us to do set the absolute minimum
frequency, we need to relax a few of our assertions that we do not
exceed the user limits.

v2: Add idle_freq
v3: Init idle_freq for vlv and add a bunch of WARNs
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Deepak S <deepak.s@linux.intel.com>
Reviewed-by: Deepak S<deepak.s@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Regressed by this commit:

commit 3455454e18ca3f92c565700539e744c620d8276b
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date:   Tue Mar 3 15:21:56 2015 +0200

    drm/i915: Add a for_each_intel_connector macro

Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Added support for SKL in the i915_frequency_info debugfs function

v2:
- corrected the handling of reqf (Damien)
- Reorderd the platform check for cagf (Ville)
Signed-off-by: NAkash Goel <akash.goel@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Static analysis was complaining that a path existed where we could use
stat[] uninitialized. Fix this by simplifying the logic to exit early if
PSR isn't supported.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Collect the currently enabled counts of slice, subslice, and
execution units using the power gate control ack message
registers specific to Cherryview.

Slice/subslice/EU info and hardware status can now be
determined for CHV, so allow the debugfs SSEU status dump
to proceed for CHV devices.
Signed-off-by: NJeff McGee <jeff.mcgee@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Apparently, this has never worked reliably and is currently disabled. Also, the
gains are not particularly impressive. Thus rather than try to keep unused code
from decaying and having to update it for other driver changes, it was decided
to simply remove it.

For: VIZ-5115
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Adding a debugfs entry to determine if DRRS is supported or not

V2: [By Ram]: Following details about the active crtc will be filled
	in seq-file of the debugfs
	1. Encoder output type
	2. DRRS Support on this CRTC
	3. DRRS current state
	4. Current Vrefresh
Format is as follows:
CRTC 1:  Output: eDP, DRRS Supported: Yes (Seamless), DRRS_State: DRRS_HIGH_RR, Vrefresh: 60
CRTC 2:  Output: HDMI, DRRS Supported : No, VBT DRRS_type: Seamless
CRTC 1:  Output: eDP, DRRS Supported: Yes (Seamless), DRRS_State: DRRS_LOW_RR, Vrefresh: 40
CRTC 2:  Output: HDMI, DRRS Supported : No, VBT DRRS_type: Seamless

V3: [By Ram]: Readability is improved.
	Another error case is covered [Daniel]

V4: [By Ram]: Current status of the Idleness DRRS along with
	the Front buffer bits are added to the debugfs. [Rodrigo]

V5: [By Ram]: Rephrased to make it easy to understand.
	And format is modified. [Rodrigo]

V6: [By Ram]: Modeset mutex are acquired for each crtc along with
	renaming the Idleness detection states  [Daniel]
Signed-off-by: NVandana Kannan <vandana.kannan@intel.com>
Signed-off-by: NRamalingam C <ramalingam.c@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
[danvet: dump full busy_frontbuffer_bits and remove the dubios
computed logical state of DRRS - debugfs is about what is fact,
developers should reach their own conclusion when debugging issues.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We have similar macros for crtcs and encoders, and the pattern happens
often enough to justify the macro.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Implicit usage of local variables in macros isn't exactly the greatest
thing in the world, especially when that variable is the drm device and
we want to move towards a broader use of the i915 device structure.

Let's make for_each_plane() take dev_priv as its first argument then.
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Chris Wilson <chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The cursor size fields in intel_crtc just duplicate the data from
cursor->state.crtc_{w,h} so we don't need them any more.  Worse, their
use in the watermark code actually introduces a subtle bug since they
don't get updated to mirror the state values until the plane commit
stage, which is *after* we've already used them to calculate new
watermark values.  This happens because we had to move watermark updates
slightly earlier (outside vblank evasion) in commit

        commit 32b7eeec
        Author: Matt Roper <matthew.d.roper@intel.com>
        Date:   Wed Dec 24 07:59:06 2014 -0800

            drm/i915: Refactor work that can sleep out of commit (v7)

Dropping the intel_crtc fields and just using the state values (which
are properly updated by the time watermark updates happen) should solve
the problem.

Aside from the actual removal of the struct fields (which are formatted
in a way that I couldn't figure out how to match in Coccinelle), the
rest of this patch was generated via the following semantic patch:

        // Drop assignment
        @@
        struct intel_crtc *C;
        struct drm_plane_state S;
        @@
        (
        - C->cursor_width = S.crtc_w;
        |
        - C->cursor_height = S.crtc_h;
        )

        // Replace usage
        @@
        struct intel_crtc *C;
        expression E;
        @@
        (
        - C->cursor_width
        + C->base.cursor->state->crtc_w
        |
        - C->cursor_height
        + C->base.cursor->state->crtc_h
        |
        - to_intel_crtc(E)->cursor_width
        + E->cursor->state->crtc_w
        |
        - to_intel_crtc(E)->cursor_height
        + E->cursor->state->crtc_h
        )

v2: Rebase

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joe Konno <joe.konno@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89346Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The current implementation is limited by the number of addresses that
fit into an unsigned long. This causes problems on 32-bit Tegra where
unsigned long is 32-bit but drm_mm is used to manage an IOVA space of
4 GiB. Given the 32-bit limitation, the range is limited to 4 GiB - 1
(or 4 GiB - 4 KiB for page granularity).

This commit changes the start and size of the range to be an unsigned
64-bit integer, thus allowing much larger ranges to be supported.

[airlied: fix i915 warnings and coloring callback]
Signed-off-by: NThierry Reding <treding@nvidia.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

fixupo

The frequency values(Rp0, Rp1, Rpn) reported by RP_STATE_CAP register
are stored, initially by the Driver, inside the dev_priv->rps structure.
Since these values are expected to remain same throughout, there is no real
need to read this register, on dynamic basis, from certain debugfs/sysfs
functions and the values can be instead retrieved from the dev_priv->rps
structure when needed.
For the i915_frequency_info debugfs interface, the frequency values from the
RP_STATE_CAP register only should be used, to indicate the actual Hw state,
since it is principally used for the debugging purpose.

v2: Reverted the changes in i915_frequency_info function, to continue report
    back the frequency values, as per the actual Hw state (Chris)
Signed-off-by: NAkash Goel <akash.goel@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Move the remaining members over to the new page table structures.

This can be squashed with the previous commit if desire. The reasoning
is the same as that patch. I simply felt it is easier to review if split.

v2: In lrc: s/ppgtt->pd_dma_addr[i]/ppgtt->pdp.page_directory[i].daddr/
v3: Rebase.
v4: Rebased after s/page_tables/page_table/.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+)
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Static checkers complain that we should probably add curly braces
because, from the indenting, it looks like seq_printf() should be inside
the list_for_each_entry() loop.  But the code is actually correct, it's
just the indenting which is off.

Besides fixing the indenting on seq_printf(), I did add curly braces,
because generally mult-line indents should have curly braces to make
them more readable.

The unintended indent was left behind and not unindented in

commit d7f46fc4
Author: Ben Widawsky <benjamin.widawsky@intel.com>
Date:   Fri Dec 6 14:10:55 2013 -0800

    drm/i915: Make pin count per VMA
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Add a new section to the 'i915_sseu_status' debugfs entry to
report the currently enabled counts of slice, subslice, and
execution units on the device. The count of enabled subslice
per slice represents the most enabled subslice on any one
slice for devices where imbalances may exist. Similarly, the
count of enabled EU per subslice represents the most enabled
EU on any one subslice.

Collect this device status for Skylake by reading the Gen9
power gate control ack message registers. Power gate control
operates on EU in pairs, therefore our reported counts of
enabled EU can be overestimated by one for each pair in which
one EU is fused-off.
Signed-off-by: NJeff McGee <jeff.mcgee@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Read fuse registers to determine the available slice total,
subslice total, subslice per slice, EU total, and EU per subslice
counts of the SKL device. The EU per subslice attribute is more
precisely defined as the maximum EU available on any one subslice,
since available EU counts may vary across subslices due to fusing.
Set flags indicating the SKL device's slice/subslice/EU (SSEU)
power gating capability. Make all values available via debugfs
entry 'i915_sseu_status'.

v2: Several small clean-ups suggested by Damien. Most notably,
    used smaller types for the new device info fields to reduce
    memory usage and improved the clarity/readability of the
    method used to extract attribute values from the fuse
    registers.
Signed-off-by: NJeff McGee <jeff.mcgee@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Where possible right now. Just a small step towards nirvana ...

v2: git add. Uggh. Noticed by Imre.

Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Replace the valleyview_set_rps() and gen6_set_rps() calls with
intel_set_rps() which itself does the IS_VALLEYVIEW() check. The
code becomes simpler since the callers don't have to do this check
themselves.

Most of the change was performe with the following semantic patch:
@@
expression E1, E2, E3;
@@
- if (IS_VALLEYVIEW(E1)) {
-  valleyview_set_rps(E2, E3);
- } else {
-  gen6_set_rps(E2, E3);
- }
+ intel_set_rps(E2, E3);

Adding intel_set_rps() and making valleyview_set_rps() and gen6_set_rps()
static was done manually. Also valleyview_set_rps() had to be moved a
bit avoid a forward declaration.

v2: Use a less greedy semantic patch

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We read the coherent current seqno and actual head from ring.
For hardware access we need to take runtime_pm reference.

Get hardware specific values with runtime reference held
and print them first to emphasize hw state vs bookkeepping.

v2: Reorder output according to hw access (Chris)
    remove superfluous locking (Daniel)

Testcase: igt/pm_rpm/debugfs-read
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88910
Tested-by: Ding Heng <hengx.ding@intel.com> (v1)
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Now when we declare gpu errors only through our own dedicated
hangcheck workqueue there is no need to have a separate workqueue
for handling the resetting and waking up the clients as the deadlock
concerns are no more.

The only exception is i915_debugfs::i915_set_wedged, which triggers
error handling through process context. However as this is only used through
test harness it is responsibility for test harness not to introduce hangs
through both debug interface and through hangcheck mechanism at the same time.

Remove gpu_error.work and let the hangcheck work do the tasks it used to.

v2: Add a big warning sign into i915_debugfs::i915_set_wedged (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We have had %x and %u intermixed. Bring everything in line and
use %x
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For example,

/sys/kernel/debug/dri/0/i915_hangcheck_info:

Hangcheck active, fires in 15887800ms
render ring:
        seqno = -4059 [current -583]
        action = 2
        score = 0
        ACTHD = 1ee8 [current 21f980]
        max ACTHD = 0

v2: Include expiration ETA. Can anyone spot a problem?
v3: Convert for workqueued hangcheck (Mika)
v4: Print seqnos as unsigned ints (Ville)
v5: Print seqnos as hex (Chris)

Tested-By: PRC QA PRTS (Patch Regression Test System Contact: shuang.he@intel.com) (v2)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Replace all the vlv_gpu_freq(), vlv_freq_opcode(),
*GT_FREQUENCY_MULTIPLIER, and /GT_FREQUENCY_MULTIPLIER instances
with intel_gpu_freq() and intel_freq_opcode() calls.

Most of the change was performed with the following semantic patch:
@@
expression E;
@@
(
- E * GT_FREQUENCY_MULTIPLIER
+ intel_gpu_freq(dev_priv, E)
|
- E *= GT_FREQUENCY_MULTIPLIER
+ E = intel_gpu_freq(dev_priv, E)
|
- E /= GT_FREQUENCY_MULTIPLIER
+ E = intel_freq_opcode(dev_priv, E)
|
- do_div(E, GT_FREQUENCY_MULTIPLIER)
+ E = intel_freq_opcode(dev_priv, E)
)

@@
expression E1, E2;
@@
(
- vlv_gpu_freq(E1, E2)
+ intel_gpu_freq(E1, E2)
|
- vlv_freq_opcode(E1, E2)
+ intel_freq_opcode(E1, E2)
)

@@
expression E1, E2, E3, E4;
@@
(
- if (IS_VALLEYVIEW(E1)) {
-  E2 = intel_gpu_freq(E3, E4);
- } else {
-  E2 = intel_gpu_freq(E3, E4);
- }
+ E2 = intel_gpu_freq(E3, E4);
|
- if (IS_VALLEYVIEW(E1)) {
-  E2 = intel_freq_opcode(E3, E4);
- } else {
-  E2 = intel_freq_opcode(E3, E4);
- }
+ E2 = intel_freq_opcode(E3, E4);
)

One hunk was manually undone as intel_gpu_freq() ended up
calling itself. Supposedly it would be possible to exclude
certain functions via !=~, but I couldn't get that to work.

Also the removal of vlv_gpu_freq() and vlv_opcode_freq() compat
wrappers was done manually.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Adding new power doamins for AUX controllers

v2: Added new power domains in power_domain_str per Imre's comment

v3: Added AUX power domains to older platforms

v4: Rebase on top of POWER_DOMAIN_PLLS.

v5: Modified to address review comments from Imre
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NSatheeshakrishna M <satheeshakrishna.m@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> (v3)
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

There are multiple forcewake domains in newer architectures.
Rename 'i915_gen6_forcewake_count_info' debugfs entry to
'i915_forcewake_domains' to reflect this.
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We have multiple forcewake domains now on recent gens. Change the
function naming to reflect this.

v2: More verbose names (Chris)
v3: Rebase
v4: Rebase
v5: Add documentation for forcewake_get/put
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Deepak S <deepak.s@linux.intel.com> (v2)
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

As we now have forcewake domains, take advantage of it
by putting the differences in gen fw handling in data rather
than in code.

In past we have opencoded this quite extensively as the fw handling
is in the fast path. There has also been a lot of cargo-culted
copy'n'pasting from older gens to newer ones.

Now when the releasing of the forcewake is done by deferred timer,
it gives chance to consolidate more. Due to the frequency of actual hw
access being significantly less.

Take advantage of this and generalize the fw handling code
as much as possible. But we still aim to keep the forcewake sequence
particularities for each gen intact. So the access pattern
to fw engines should remain the same.

v2: - s/old_ack/clear_ack (Chris)
    - s/post_read/posting_read (Chris)
    - less polite commit msg (Chris)

v3: - rebase
    - check and clear wake_count in init

v4: - fix posting reads for gen8 (PRTS)
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Deepak S <deepak.s@linux.intel.com> (v2)
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Introduce a structure to track the individual forcewake domains and use
that to eliminate duplicate logic.

v2: - Rebase on latest dinq (Mika)
    - for_each_fw_domain macro (Mika)
    - Handle reset atomically, keeping the timer running (Mika)
    - for_each_fw_domain parameter ordering (Chris)
    - defer timer on new register access (Mika)

v3: - Fix forcewake_reset/get race by waiting pending timers

v4: - cond_resched and verbose warning on timer deletion (Chris)
    - need to run pending timers manually on reset

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Acked-by: Deepak S <deepak.s@linux.intel.com> (v2)
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On user forcewake access, assert that runtime pm reference is held.
Fix and cleanup the callsites accordingly.

v2: Remove intel_runtime_pm_get() rebasehap (Deepak)

v3: use drivers own runtime state tracking as pm_runtime_active()
    will return wrong results when we are in resume callchain (Mika)
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Deepak S <deepak.s@linux.intel.com> (v2)
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Move all remaining elements that were unique to execlists queue items
in to the associated request.

Issue: VIZ-4274

v2: Rebase. Fixed issue of overzealous freeing of request.
v3: Removed re-addition of cleanup work queue (found by Daniel Vetter)
v4: Rebase.
v5: Actual removal of intel_ctx_submit_request. Update both tail and postfix
pointer in __i915_add_request (found by Thomas Daniel)
v6: Removed unrelated changes
Signed-off-by: NNick Hoath <nicholas.hoath@intel.com>
Reviewed-by: NThomas Daniel <thomas.daniel@intel.com>
[danvet: Reformat comment with strange linebreaks.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Where there were duplicate variables for the tail, context and ring (engine)
in the gem request and the execlist queue item, use the one from the request
and remove the duplicate from the execlist queue item.

Issue: VIZ-4274

v1: Rebase
v2: Fixed build issues. Keep separate postfix & tail pointers as these are
used in different ways. Reinserted missing full tail pointer update.
Signed-off-by: NNick Hoath <nicholas.hoath@intel.com>
Reviewed-by: NThomas Daniel <thomas.daniel@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>