Guest Memory Regions 2 is a way to bind pages to the GPU, but using
the FIFO instead of an io-submitted descriptor chain.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJakob Bornecantz <jakob@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJosé Fonseca <jfonseca@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

When GMR2 is available, make sure we restrict the number of used GMR pages
to the limit indicated by the device.
This is done by failing a GMRID allocation if the total number of GMR pages
exceeds the limit.
As a result TTM will then start evicting buffers in GMR memory on a
LRU basis until the allocation succeeds.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Previously this was not done when any 3D resource was active,
since that meant disabling the fifo with all 3D state lost.
Now, if there are still 3D resources active, we use the svga hide feature.

This fixes X server VT switching with 3D enabled.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Perform all command stream validation in a bounce buffer separate from the
fifo. This makes the fifo available to all validation-generated commands,
which would otherwise attempt to grab the fifo recursively, causing a
deadlock. This is in preparation for GMR2 and swappable surfaces.

Also maintain references to all surfaces in the command stream until the
command stream has been fired in order to avoid racing with surface
destruction taking place after validation but before submission.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NMichel Dänzer <daenzer@vmware.com>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NMichel Dänzer <daenzer@vmware.com>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NMichel Dänzer <daenzer@vmware.com>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NMichel Dänzer <daenzer@vmware.com>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Sometimes we want to know whether a buffer is busy and wait for it (bo_wait).
However, sometimes it would be more useful to be able to query whether
a buffer is busy and being either read or written, and wait until it's stopped
being either read or written. The point of this is to be able to avoid
unnecessary waiting, e.g. if a GPU has written something to a buffer and is now
reading that buffer, and a CPU wants to map that buffer for read, it needs to
only wait for the last write. If there were no write, there wouldn't be any
waiting needed.

This, or course, requires user space drivers to send read/write flags
with each relocation (like we have read/write domains in radeon, so we can
actually use those for something useful now).

Now how this patch works:

The read/write flags should passed to ttm_validate_buffer. TTM maintains
separate sync objects of the last read and write for each buffer, in addition
to the sync object of the last use of a buffer. ttm_bo_wait then operates
with one the sync objects.
Signed-off-by: NMarek Olšák <maraeo@gmail.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NRakib Mullick <rakib.mullick@gmail.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Tejun Heo <tj@kernel.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>

This reverts commit 5a893fc2.

This causes a use after free in the ttm free alloc pages path,
when it tries to get the be after the be has been destroyed.
Signed-off-by: NDave Airlie <airlied@redhat.com>

... and fixup some methods to accept the constant argument.

Now that constant module arrays are loaded into read-only memory, using
const appropriately has some benefits beyond warning the programmer
about likely mistakes.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This makes the accounting when using 'debug_dma_dump_mappings()'
and CONFIG_DMA_API_DEBUG=y be assigned to the correct device
instead of 'fallback'.

No functional change - just cosmetic.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

This abstracts the pci/platform interface out a step further,
we can go further but this is far enough for now to allow USB
to be plugged in.

The drivers now just call the init code directly for their
device type.
Signed-off-by: NDave Airlie <airlied@redhat.com>

We pass in the array of ttm pages to be populated in the GART/MM
of the card (or AGP). Patch titled: "ttm: Utilize the DMA API for
pages that have TTM_PAGE_FLAG_DMA32 set." uses the DMA API to make
those pages have a proper DMA addresses (in the situation where
page_to_phys or virt_to_phys do not give use the DMA (bus) address).

Since we are using the DMA API on those pages, we should pass in the
DMA address to this function so it can save it in its proper fields
(later patches use it).

[v2: Added reviewed-by tag]
Reviewed-by: NThomas Hellstrom <thellstrom@shipmail.org>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: NIan Campbell <ian.campbell@citrix.com>

flush_scheduled_work() is deprecated and scheduled to be removed.
Directly flush info->deferred_work on removal instead.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Thomas Hellstrom <thellstrom@vmware.com>

For the fbdev api if the struct fb_var_screeninfo accel_flags field is set
to FB_ACCELF_TEXT then userland applications can not mmap the mmio region.
Since it is a bad idea for DRM drivers to expose the mmio region via the
fbdev layer we always set the accel_flags to prevent this. Please apply.
Signed-off-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Rather than having the driver supply the validation sequence, leave that
responsibility to TTM. This saves some confusion and a function argument.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Structure drm_vmw_fence_rep is copied to userland with field "pad64"
uninitialized.  It leads to leaking of contents of kernel stack memory.
Signed-off-by: NVasiliy Kulikov <segooon@gmail.com>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

When bo pin failed during modesetting,
vmwgfx would try to unref a non-existing buffer object.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NJoe Perches <joe@perches.com>
Reviewed-by: NMatt Turner <mattst88@gmail.com>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Use Ben's new range manager hooks to implement a manager for
GMRs that manages ids rather than ranges.
This means we can use the standard TTM code for binding, unbinding and
eviction.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Save at least one screen layout during vga save to avoid odd things
happening during restore.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This can be used by the X server to restrict mode resolutions and size of
root pixmap.

Bump minor to announce this availability.
Bump driver date.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This needs to be reviewed once we support screen objects and don't rely
on VRAM for the frame-buffer.

Also fix some integer overflow issues pointed out by Michel Daenzer.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This makes sure noone accesses the fifo while it's taken down using the
dirty ioctl.
Also make sure all workqueues are idled before the fifo is taken down.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This is needed for the callback to identify the caller and take
appropriate locks if needed.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Add the new-style PM hooks prepare and complete. This allows us to
power up the device again after the hibernation image has been created, and
display output will thus be active until the VM is finally powered off.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Don't suspend or hibernate when there are 3D resources active since we
can't restore the device's 3D state. Instead fail with an error message.

In other cases, make sure we re-enable the fifo and unlock ttm on resume.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Also add some sanity checks.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Nouveau will need this on GeForce 8 and up to account for the GPU
reordering physical VRAM for some memory types.
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Acked-by: NThomas Hellström <thellstrom@vmware.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

If the soon-to-be scanout buffer is partly covering the intended
VRAM region, move and pin will fail. In that case, just move it out
to system before attempting to move it in again.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The removed code causes oopses with newer drms on master drop.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>