The IB spec defines the field to be 32 bits, not 16 bits.
Signed-off-by: NJack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

When allocating a table for mem-free HCA context, don't assume that
obj_size * nobj is an even multiple of MTHCA_TABLE_CHUNK_SIZE.  In
particular, make sure we allocate at least one slot even if the table
is smaller than MTHCA_TABLE_CHUNK_SIZE.
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The loop in mthca_map_cmd() would fill one entry past the end of the
mailbox buffer before calling the firmware command.
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

We should use the first word of the clear interrupt register if
the bit we're after is < 32, not < 31.
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

If we allocate a bunch of doorbell records and then free them, we'll
end up with completely empty pages, which we then free.  However, when
we come back to allocate more doorbell pages, we have to reallocate
those empty pages rather than always trying to take a slot that we've
never used.  If we don't, we eventually use up every slot and fail to
allocate a doorbell record, even though we have plenty of free space.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Clean up QP table array on device removal.
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Userspace SRQs don't have a buffer allocated for them in the kernel, so
it doesn't make sense to set srq->last during initialization.  In fact,
this can crash trying to follow a nonexistent buffer pointer.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The error handling paths in mthca_tavor_post_srq_recv() and
mthca_arbel_post_srq_recv() are quite bogus, the result of a
screwed up merge.  Fix them so they work as intended.

Pointed out by Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

In mthca_create_eq(), we call get_eqe() before setting eq->nent.  This
is wrong, because get_eqe() uses eq->nent.  Fix this, and clean up the
code a little while we're at it.  (We got lucky with the current code,
because eq->nent was cleared to 0, which get_eqe() made happen to do
the right thing)

Pointed out by Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Fix posting first WQE for mem-free HCAs: we need to link to previous
WQE even in that case.  While we're at it, simplify code for
Tavor-mode HCAs.  We don't really need the conditional test there
either; we can similarly always link to the previous WQE.

Based on Michael S. Tsirkin's analogous fix for userspace libmthca.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The hardware reads the ACK timeout field from the most significant 5
bits of struct mthca_qp_path's ackto field, not the least significant
bits.  This fix has the driver put the timeout in the right place.
Without this, we get a timeout that is 2^8 times too small.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

This patch removes CONFIG_PCI_NAMES.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add missing call to init_waitqueue_head().
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

When we modify a QP to the RESET state, completely clean up the QP
so that it is really and truly reset.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Move the InfiniBand headers from drivers/infiniband/include to include/rdma.
This allows InfiniBand-using code to live elsewhere, and lets us remove the
ugly EXTRA_CFLAGS include path from the InfiniBand Makefiles.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Add mthca support for shared receive queues (SRQs),
including userspace SRQs.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

When creating a table in context memory where the table is smaller
than our chunk size, we don't want to allocate and map a full chunk.
Instead, allocate just enough memory to cover the table.

This can be pretty simple because all tables are a power-of-2 size, so
either the table is a multiple of the chunk size, or it's smaller than
one chunk.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Move the definitions of the WQE structures from mthca_qp.c into
mthca_wqe.h, so that we'll be able to share them when we add the
SRQ code in mthca_srq.c.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Mem-free HCAs never generate error CQEs that complete multiple WQEs,
so just skip the call to mthca_free_err_wqe() for them rather than
having logic to handle the mem-free case in mthca_free_err_wqe().
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Clean up the allocation of memory for queues by factoring out the
common code into mthca_buf_alloc() and mthca_buf_free().  Now CQs and
QPs share the same queue allocation code, which we'll also use for SRQs.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Set the max_msg_sz port property correctly in mthca's port_query
function.  Also zero out the attr struct so that we don't leave
any other members uninitialized.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

When we call the INIT_IB firmware command to bring up a port, use
the actual port width capability returned by the QUERY_DEV_LIM
command instead of always trying to enable both 1X and 4X.  This
fixes breakage seen when the firmware is build to allow 4X only.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

changing CONFIG_LOCALVERSION rebuilds too much, for no appearent reason.
Remove unneeded includes of <linux/version.h>.
Signed-off-by: NOlaf Hering <olh@suse.de>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Use the generic key_to_hw_index() function instead of the Arbel-specific
version in mthca_free_region().
Signed-off-by: NGuy German <guyg@voltaire.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Add support for reporting HCA board ID returned from QUERY_ADAPTER
firmware command through sysfs.
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Fix sparse warnings.  Use __be* where appropriate.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Make some lawyers happy and add copyright notices for people who
forgot to include them when they actually touched the code.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Update FW versions in mthca according to July 05 Mellanox release
Signed-off-by: NTziporet Koren <tziporet@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Use io_remap_pfn_range to remap IO pages (remap_pfn_range is for memory).
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Fix handling of error CQ entries on mem-free HCAs: the doorbell count
is never valid so we shouldn't look at it.  This fixes problems exposed
by new HCA firmware.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Add support for userspace queue pairs (QPs) to mthca.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for userspace completion queues (CQs) to mthca.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for userspace memory regions (MRs) to mthca.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for userspace protection domains (PDs) to mthca.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for mmap() method to mthca, so that userspace can get access to
doorbell registers.  This allows userspace to get direct access to the HCA for
data path operations.

Each userspace context gets its own copy of the doorbell registers and is only
allowed to use resources that the kernel has given it access to.  In other
words, this is safe.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for managing userspace contexts to mthca.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for userspace doorbell records to mthca.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add the mthca_user.h header file, which defines the device-specific ABI used
by the mthca low-level driver for kernel/user communication.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Update mthca to compile against the updated API for low-level drivers.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It's about time for a version bump.
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>