- 29 5月, 2007 10 次提交
-
-
由 David S. Miller 提交于
1) The TSB lookup was not using the correct hash mask. 2) It was not aligned on a boundary equal to it's size, which is required by the sun4v Hypervisor. wasn't having it's return value checked, and that bug will be fixed up as well in a subsequent changeset. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
It was using an immediate _PAGE_EXEC_4U value in an 'and' instruction to perform the test. This doesn't work because the immediate field is signed 13-bit, this the mask being tested against the PTE was 0x1000 sign-extended to 32-bits instead of just plain 0x1000. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Horst H. von Brand 提交于
This is bug 8540 on bugzilla.kernel.org arch/sparc64/time.c contains references to assorted bq4802 stuff if CONFIG_PCI is not set, and compile fails. I #ifdef'ed out everything that looks PCI-ish in that file. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Cheetah systems can have cpuids as large as 1023, although physical systems don't have that many cpus. Only three limitations existed in the kernel preventing arbitrary NR_CPUS values: 1) dcache dirty cpu state stored in page->flags on D-cache aliasing platforms. With some build time calculations and some build-time BUG checks on page->flags layout, this one was easily solved. 2) The cheetah XCALL delivery code could only handle a cpumask with up to 32 cpus set. Some simple looping logic clears that up too. 3) thread_info->cpu was a u8, easily changed to a u16. There are a few spots in the kernel that still put NR_CPUS sized arrays on the kernel stack, but that's not a sparc64 specific problem. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
These messages were very useful when bringing up the OBP based PCI device scan code, but it's just a lot of noise every bootup now especially on big machines. The messages can be re-enabled via 'ofpci_debug=1' on the kernel command line. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Handle arbitrary base and length values as long as they are multiples of IO_PAGE_SIZE. Bug found by Arun Kumar Rao. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 5月, 2007 2 次提交
-
-
由 Sam Ravnborg 提交于
With this consolidation we can now modify the .data section definition in one spot for all archs. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
Move definition of .text section to asm-generic. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 18 5月, 2007 1 次提交
-
-
由 David S. Miller 提交于
SPARC64_NSEC_PER_CYC_SHIFT was set too high. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 5月, 2007 1 次提交
-
-
由 David S. Miller 提交于
Hypervisor interfaces need to be negotiated in order to use some API calls reliably. So add a small set of interfaces to request API versions and query current settings. This allows us to fix some bugs in the hypervisor console: 1) If we can negotiate API group CORE of at least major 1 minor 1 we can use con_read and con_write which can improve console performance quite a bit. 2) When we do a console write request, we should hold the spinlock around the whole request, not a byte at a time. What would happen is that it's easy for output from different cpus to get mixed with each other. 3) Use consistent udelay() based polling, udelay(1) each loop with a limit of 1000 polls to handle stuck hypervisor console. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 5月, 2007 3 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
If we miss on the ranges, just toss the translation up to the parent instead of failing. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 5月, 2007 7 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Noticed by Meelis Roos. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Arlott 提交于
Spelling fixes in arch/sparc64/. Signed-off-by: NSimon Arlott <simon@fire.lp0.eu> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Let's use SLUB, since it works now, in order to get it tested a bit. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 5月, 2007 2 次提交
-
-
由 Amy Griffis 提交于
When auditing syscalls that send signals, log the pid and security context for each target process. Optimize the data collection by adding a counter for signal-related rules, and avoiding allocating an aux struct unless we have more than one target process. For process groups, collect pid/context data in blocks of 16. Move the audit_signal_info() hook up in check_kill_permission() so we audit attempts where permission is denied. Signed-off-by: NAmy Griffis <amy.griffis@hp.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Amy Griffis 提交于
Add a syscall class for sending signals. Signed-off-by: NAmy Griffis <amy.griffis@hp.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 10 5月, 2007 3 次提交
-
-
由 David S. Miller 提交于
Otherwise MSI explodes because pci_msi_init_pci_dev() does not get invoked. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Use iteration for scanning of PROM node siblings. Based upon a patch by Greg Onufer, who found this bug. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
With the advent of kdump, the assumption that the boot CPU when booting an UP kernel is always the CPU with a particular hardware ID (often 0) (usually referred to as BSP on some architectures) is not valid anymore. The reason being that the dump capture kernel boots on the crashed CPU (the CPU that invoked crash_kexec), which may be or may not be that particular CPU. Move definition of hard_smp_processor_id for the UP case to architecture-specific code ("asm/smp.h") where it belongs, so that each architecture can provide its own implementation. Signed-off-by: NFernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Acked-by: NAndi Kleen <ak@suse.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 5月, 2007 11 次提交
-
-
由 David S. Miller 提交于
All the sun4u controllers do the same thing to compute the physical I/O address to poke, and we can move the sun4v code into this common location too. This one needs a bit of testing, in particular the Sabre code had some funny stuff that would break up u16 and/or u32 accesses into pieces and I didn't think that was needed any more. If it is we need to find out why and add back code to do it again. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
And eliminate DIE_GPF while we're at it. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Everything it contains can be hidden in pci_impl.h Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Do not use IRQF_SHARED, these interrupt numbers should all be unique. Also use name strings without spaces in them just like PCI controller drivers do, for consistency. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
The idea is to move more and more things into the pbm, with the eventual goal of eliminating the pci_controller_info entirely as there really isn't any need for it. This stage of the transformations requires some reworking of the PCI error interrupt handling. It might be tricky to get rid of the pci_controller_info parenting for a few reasons: 1) When we get an uncorrectable or correctable error we want to interrogate the IOMMU and streaming cache of both PBMs for error status. These errors come from the UPA front-end which is shared between the two PBM PCI bus segments. Historically speaking this is why I choose the datastructure hierarchy of pci_controller_info-->pci_pbm_info 2) The probing does a portid/devhandle match to look for the 'other' pbm, but this is entirely an artifact and can be eliminated trivially. What we could do to solve #1 is to have a "buddy" pointer from one pbm to another. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-