- 13 5月, 2005 13 次提交
-
-
由 Malli Chilakala 提交于
82573 specific code & packet split code Signed-off-by: NMallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: NGanesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: NJohn Ronciak <john.ronciak@intel.com> diff -up net-drivers-2.6/drivers/net/e1000/e1000.h net-drivers-2.6/drivers/net/e1000.new/e1000.h
-
由 Malli Chilakala 提交于
Modified e1000_clean:: exit poll if no Tx and work_done == 0 Signed-off-by: NMallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: NGanesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: NJohn Ronciak <john.ronciak@intel.com> diff -up net-drivers-2.6/drivers/net/e1000/e1000_main.c net-drivers-2.6/drivers/net/e1000.new/e1000_main.c
-
由 Malli Chilakala 提交于
Removed redundant statement in e1000_clean_tx_irq Signed-off-by: NMallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: NGanesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: NJohn Ronciak <john.ronciak@intel.com> diff -up net-drivers-2.6/drivers/net/e1000/e1000_main.c net-drivers-2.6/drivers/net/e1000.new/e1000_main.c
-
由 Malli Chilakala 提交于
Implement 82546 errata 10 -- first Tx descriptor cannot have more than 2015 byte of data in it or it could hang the transmitter. Signed-off-by: NMallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: NGanesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: NJohn Ronciak <john.ronciak@intel.com> diff -up net-drivers-2.6/drivers/net/e1000/e1000_main.c net-drivers-2.6/drivers/net/e1000.new/e1000_main.c
-
由 Malli Chilakala 提交于
e1000 stops working after resume, call pci_enable_device after pci_restore_state - Modified Andrew Morton's patch Signed-off-by: NMallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: NGanesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: NJohn Ronciak <john.ronciak@intel.com> diff -up net-drivers-2.6/drivers/net/e1000/e1000_main.c net-drivers-2.6/drivers/net/e1000.new/e1000_main.c
-
由 Malli Chilakala 提交于
Fix computation of netdev stats from controller stats counters - from sfeldma@pobox.com Signed-off-by: NMallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: NGanesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: NJohn Ronciak <john.ronciak@intel.com> diff -up net-drivers-2.6/drivers/net/e1000/e1000_main.c net-drivers-2.6/drivers/net/e1000.new/e1000_main.c
-
由 Malli Chilakala 提交于
Dump information on Tx ring when 'NETDEV: Watchdog' condition is reached Signed-off-by: NMallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: NGanesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: NJohn Ronciak <john.ronciak@intel.com> diff -up net-drivers-2.6/drivers/net/e1000/e1000_main.c net-drivers-2.6/drivers/net/e1000.new/e1000_main.c
-
由 Malli Chilakala 提交于
Delay clean-up of last Tx packet to fix pre-mature writeback issue of Tx descriptors only when TSO is enabled Signed-off-by: NMallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: NGanesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: NJohn Ronciak <john.ronciak@intel.com> diff -up net-drivers-2.6/drivers/net/e1000/e1000_main.c net-drivers-2.6/drivers/net/e1000.new/e1000_main.c
-
由 Malli Chilakala 提交于
Fix kernel panic with 82541 LOM when using a 100M cable Signed-off-by: NMallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: NGanesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: NJohn Ronciak <john.ronciak@intel.com> diff -up net-drivers-2.6/drivers/net/e1000/e1000_main.c net-drivers-2.6/drivers/net/e1000.new/e1000_main.c
-
由 Malli Chilakala 提交于
Enable polling before enabling interrupts -- avoids (in NAPI mode) entering the ISR and returning without doing any work because polling is not enabled. [romieu@fr.zoriel.com] Signed-off-by: NMallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: NGanesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: NJohn Ronciak <john.ronciak@intel.com> diff -up net-drivers-2.6/drivers/net/e1000/e1000_main.c net-drivers-2.6/drivers/net/e1000.new/e1000_main.c
-
由 Malli Chilakala 提交于
MSI support for PCI-e adapters Signed-off-by: NMallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: NGanesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: NJohn Ronciak <john.ronciak@intel.com> diff -up net-drivers-2.6/drivers/net/e1000/e1000.h net-drivers-2.6/drivers/net/e1000.new/e1000.h
-
由 Malli Chilakala 提交于
Fix msec-delay definition in e1000_osdep.h to use msleep Signed-off-by: NMallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: NGanesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: NJohn Ronciak <john.ronciak@intel.com> diff -up net-drivers-2.6/drivers/net/e1000/e1000_osdep.h net-drivers-2.6/drivers/net/e1000.new/e1000_osdep.h
-
由 Malli Chilakala 提交于
Added enhanced functionality to the loopback diags to wrap the descriptor rings. Signed-off-by: NMallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: NGanesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: NJohn Ronciak <john.ronciak@intel.com> diff -up net-drivers-2.6/drivers/net/e1000/e1000_ethtool.c net-drivers-2.6/drivers/net/e1000.new/e1000_ethtool.c
-
- 07 5月, 2005 23 次提交
-
-
由 Linus Torvalds 提交于
-
由 Jeff Dike 提交于
This fixes some x86_64 bugs - - maybe_map returns -1 on error instead of 0, which is interpreted as physical address 0 - removed an include of ipc.h, which isn't needed - fixed the calculation of signal frame location - the signal delivery code is now immune to the stack expansion check - added a missing include Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Bodo Stroesser 提交于
tt-mode closes switch_pipes in exit_thread_tt and kills processes in switch_to_tt, if the exit_state is EXIT_DEAD or EXIT_ZOMBIE. In very rare cases the exiting process can be scheduled out after having set exit_state and closed switch_pipes (from release_task it calls proc_pid_flush, which might sleep). If this process is to be restarted, UML failes in switch_to_tt with: write of switch_pipe failed, err = 9 We fix this by closing switch_pipes not in exit_thread_tt, but later in release_thread_tt. Additionally, we set switch_pipe[0] = 0 after closing. switch_to_tt must not kill "from" process depending on its exit_state, but must kill it after release_thread was processed only, so it examines switch_pipe[0] for its decision. Signed-off-by: NBodo Stroesser <bstroesser@fujitsu-siemens.com> Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Bodo Stroesser 提交于
Only x86 and x86_64 use arch_align_stack(), all other subarches have: #define arch_align_stack(x) (x) So, if this definition is found, UML's own arch_align_stack() should be skipped. Signed-off-by: NBodo Stroesser <bstroesser@fujitsu-siemens.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Bodo Stroesser 提交于
tt/mem.c still uses hardcoded TOP for i386 instead of CONFIG_TOP_ADDR provided by subarch's Kconfig_XXXX, which would be right. Signed-off-by: NBodo Stroesser <bstroesser@fujitsu-siemens.com> Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
So, there I was, looking at my own code, wondering what the magic setjmp return values did. This patch turns the constants that are used to make requests of the initial thread into meaningful symbols. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
This eliminates some stuff from arch/um/kernel/Makefile which refers to a file which has long since been deleted. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
Eliminate the non-inline version of switch_mm, which can't be used, considering the inline version in asm/mmu_context.h Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Bodo Stroesser 提交于
s390 tt-mode needs to save not only syscall number, but an further register also. Signed-off-by: NBodo Stroesser <bstroesser@fujitsu-siemens.com> Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Bodo Stroesser 提交于
s390 needs to change some parts of arch/um/kernel/ptrace.c. Thus, the code regarding PEEKUSER and POKEUSER are shifted to arch/um/sys-<subarch>/ptrace.c. Also s390 debug registers need to be updated, when singlestepping is switched on / off. Thus, setting/resetting of singlestepping is centralized in the new function set_singlestep(), which also inserts the macro SUBARCH_SET_SINGLESTEP(mode), if defined. Finally, s390 has the "ieee_instruction_pointer" in its registers, which also is allowed to be read via ptrace( PTRACE_PEEKUSER, getpid(), PT_IEEE_IP, 0); To implement this feature, sys_ptrace inserts the macro SUBARCH_PTRACE_SPECIAL, if defined. Signed-off-by: NBodo Stroesser <bstroesser@fujitsu-siemens.com> Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
Command line handling cleanups - a couple of things made static and an unused declaration removed from header. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
I accidentally included include/asm-um/elf.h as a real file in a previous patch. This patch eliminates it. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
Remove the __deprecated from verify_area_skas and verify_area_tt. Since verify_area is itself marked __deprecated, and it is the only caller of these, then they don't need to be marked. Marking them only makes the build noisier. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jiri Benc 提交于
This patch adds a VIDIOC_G_FREQUENCY command to tuner-core.c and sets lowest and highest tunable frequencies in v4l2_tuner structure returned by VIDIOC_G_TUNER command. Signed-off-by: NJiri Benc <jbenc@suse.cz> Cc: Gerd Knorr <kraxel@bytesex.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jiri Benc 提交于
In VIDIOC_S_FREQUENCY command in tuner-core.c, t->freq is set to a new value before calling set_freq(). This is not necessary, as set_freq() sets t->freq itself. Moreover, it causes problems with Philips tuners, as they need to take into consideration difference between previous and new frequency. Signed-off-by: NJiri Benc <jbenc@suse.cz> Cc: Gerd Knorr <kraxel@bytesex.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kumar Gala 提交于
In separating out support for hardware floating point we missed the fact that both POWER3 and POWER4 have HW FP. Enable CONFIG_PPC_FPU for POWER3 and POWER4 fixes the issue. Signed-off-by: NKumar Gala <kumar.gala@freescale.com> Acked-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul Mackerras 提交于
This patch enables CONFIG_RTAS_PROC by default on pSeries. This will preserve /proc/ppc64/rtas/rmo_buffer, which is needed by librtas. Signed-off-by: NJohn Rose <johnrose@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
This change from March 3rd causes the partition parsing code to ignore partitions which have a signature byte of zero. Turns out that more people have such partitions than we expected, and their device numbering is coming up wrong in post-2.6.11 kernels. So revert the change while we think about the problem a bit more. Cc: Andries Brouwer <Andries.Brouwer@cwi.nl> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
I somehow missed that there is external usage of rd_size on some architectures. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
Noticed by Jakub Jermar <jermar@itbs.cz>
-
由 James Bottomley 提交于
There's a slight bug in the routines in that if the period requires dt, then the routine will unconditionally set it. DT may only be set if Wide is also set, so this turns back on the wide bit. For domain validation to work correctly, we need to observe the wide bit absolutely. Acked by: Matthew Wilcox <willy@debian.org> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 06 5月, 2005 4 次提交
-
-
由 Jens Axboe 提交于
Trying software suspend on my workstation makes it crash on resume. The problem is that via82xx marks the chip_init function as _devinit, but calls it on resume as well. Cc: <tiwai@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJens Axboe <axboe@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul Mackerras 提交于
Move the code to set global interrupt queue membership to xics.c, and remove no longer needed extern declarations. Also call it on all cpus (even the boot cpu) to prepare for kexec. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NR Sharada <sharada@in.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk@arm.linux.org.uk>
-
由 Paul Mackerras 提交于
Trivial patch to remove our last direct reference to contig_page_data. This will make it just that much less hard to seperate NUMA and DISCONTIG. Please forward on. Against 2.6.12-rc1 Signed-off-by: NJoel Schopp <jschopp@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-