- 04 1月, 2014 1 次提交
-
-
由 Julia Lawall 提交于
Netdev_priv performs an addition, not a pointer dereference, so it seems quite unlikely that its result would ever be NULL. A semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ statement S; @@ - if (!netdev_priv(...)) S // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Acked-by: NGrant Grundler <grundler@parisc-linux.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 1月, 2014 25 次提交
-
-
由 Shawn Bohrer 提交于
If the hwtstamp_config matches what is currently set for the device then simply return. Without this change any program that tries to enable hardware timestamps will cause the link to cycle even if hardware timstamps were already enabled. Signed-off-by: NShawn Bohrer <sbohrer@rgmadvisors.com> Acked-By: NHadar Hen Zion <hadarh@mellanox.com> Acked-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shawn Bohrer 提交于
This adds a PHC to the mlx4_en driver. We use reader/writer spinlocks to protect the timecounter since every packet received needs to call timecounter_cycle2time() when timestamping is enabled. This can become a performance bottleneck with RSS and multiple receive queues if normal spinlocks are used. This driver has been tested with both Documentation/ptp/testptp and the linuxptp project (http://linuxptp.sourceforge.net/) on a Mellanox ConnectX-3 card. Signed-off-by: NShawn Bohrer <sbohrer@rgmadvisors.com> Acked-By: NHadar Hen Zion <hadarh@mellanox.com> Acked-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julia Lawall 提交于
Set the return variable to an error code as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julia Lawall 提交于
Set the return variable to propagate any error code as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zhi Yong Wu 提交于
The code incorrectly save the queue index as the hash, so this patch is fixing it with the hash received in the stack receive path. Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com> Acked-by: NJason Wang <jasowang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
More functions in bonding that can be declared static because they are only used in one file. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Make variables only used in one file static. Also avoids possible namespace collisions. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
The net_device.dev_addr have more than 2 bytes of additional data after the mac addr, so it is safe to use the ether_addr_equal_64bits(). Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
I'm sure the operand slave and bond for the function will not be NULL, so the check for the bond will not make any sense, so remove the judgement, and the return value was useless here, remove the unwanted return value. The comments for the bond 3ad is too old, cleanup some errors and warming. Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
The return value for bond_dev_queue_xmit() will not be used anymore, so remove the return value. Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
When the skb is xmit by the function bond_slave_override(), it will have duplicate judgement for slave state, and I think it will consumes a little performance, maybe it is negligible, so I simplify the function and remove the unwanted judgement. Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
The bond_alb_xmit will check the return value for bond_dev_queue_xmit() every time, but the bond_dev_queue_xmit() is always return 0, it is no need to check the value every time, so remove the unneed judgement for the xmit path. Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
The bond_dev_queue_xmit() will always return 0, and as a fast path, it is inappropriate to check the res value when xmit every package, so remove the res check and avoid once judgement for xmit. Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
Use possibly more efficient ether_addr_equal_64bits to instead of memcmp. Modify the MAC_ADDR_COMPARE to MAC_ADDR_EQUAL, this looks more appropriate. The comments for the bond 3ad is too old, cleanup some errors and warming. Suggested-by: NJoe Perches <joe@perches.com> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Support new chip RTL8153 which is the USB 3.0 giga ethernet adapter. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Split the contents of rtl8152_enable() into rtl_set_eee_plus() and rtl_enable(). Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
The different chips may have different settings. This makes it easy to let different chips have the same flow with differnt settings. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Replace RX_BUF_THR with RX_THR_HIGH. Replace RWSUME_INDICATE with RESUME_INDICATE. Add CRC_SIZE, TX_ALIGN, and RX_ALIGN. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
The old method to access PHY is through mdio channel. Replace it with the OCP channel. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Change the locations of rtl8152_unload() and ocp_reg_write(). Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eddie Wai 提交于
The buffer that is used to pass doorbell offset to the userspace UIO driver may contain nonzero value in older versions of bnx2x driver. Userspace cannot easily tell whether it contains a valid doorbell offset or not. With the added signature, userspace will only use the doorbell offset if the signature is present. Update version to 2.5.19. Signed-off-by: NEddie Wai <eddie.wai@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Auto-mdix currently only works if autoneg is enabled. This patch enables auto-mdix all the time by setting a bit in a PHY register. Define meaningful constants for this PHY registers. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The current code does not reset the advertisement register when the speed is forced, leaving the default advertisement value of 10 Mbps. This does not work with some link partners when the next patch enables auto-mdix. Set advertisement register to 0 if the speed is forced. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 1月, 2014 14 次提交
-
-
由 Greg Rose 提交于
A0 stepping silicon specific code Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
Modify the existing Kconfig, Makefile, and MAINTAINERS to add the driver to the kernel. Add a Makefile and a documentation Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
This patch implements the hardware specific init and management. Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
This patch contains the main driver header files, containing structures and data types specific to the linux driver. i40e_osdep.h contains some code that helps us adapt our OS agnostic code to Linux. Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
This PCI-E SR-IOV virtual function (VF) driver is dependant upon the physical function (PF) driver (i40e) for nearly all of its hardware configuration. Requests from the VF driver are passed to the PF using the hardware's Admin Queue. This patch contains the functionality for communicating with the PF driver. Because of the delay inherent in this communications channel, most of the replies from the PF driver are handled asynchronously. The exceptions are the "send API version" and "get VF config" messages, which busy-wait because they are done so early during init that interrupts are not yet configured. Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
This patch contains the ethtool interface and related functionality. Since the VF driver is mostly unaware of link, much of that functionality is unused. The driver implements ethtool hooks for statistics, driver info, and some basic non-link-related driver settings. Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
This file contains the transmit, receive, and NAPI functionality. Some of the functions in this module are extracted from the i40e driver but functions that are not appropriate for virtual function devices have been removed. Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
This is the driver for the Intel(R) XL710 X710 Virtual Function. This patch contains the main driver entry points, but does not include transmit and receive or ethtool functionality, which are presented as separate patches in this series. Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 dingtianhong 提交于
Use possibly more efficient ether_addr_equal_64bits to instead of memcmp. Cc: "David S. Miller" <davem@davemloft.net> Suggested-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
Use possibly more efficient ether_addr_equal to instead of memcmp. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
Use possibly more efficient ether_addr_equal to instead of memcmp. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
Use possibly more efficient ether_addr_equal to instead of memcmp. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
Use possibly more efficient ether_addr_equal to instead of memcmp. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
Use possibly more efficient ether_addr_equal to instead of memcmp. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-