This patch fixes on following build warning.

warning: (PLAT_S5P && (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 ||
	     ARCH_S5PV210 || ARCH_S5PV310) || ARCH_S3C64XX && <choice>)
	     selects PLAT_SAMSUNG which has unmet direct dependencies
	     (ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX)
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

v2: fixes from Russell King
	- include linux/io.h instead of mach/io.h

v3: fixes from Linus Walleij
	- remove /16 * 16 from UART clock

v3:
	- Fix checkpatch issues
	- make board init calls explicit
	- use clock init table to set clocks
	- remove panel
Signed-off-by: NColin Cross <ccross@android.com>
Signed-off-by: NErik Gilling <konkers@android.com>

v2: fixes from Russell King
	- include linux/io.h instead of asm/io.h
v3:
	- Add drive strength controls
	- Replace typedef enums with plain enums
Signed-off-by: NErik Gilling <konkers@android.com>
Signed-off-by: NColin Cross <ccross@android.com>

v2: fixes from Mike Rapoport:
	- move gpio-names.h to arch/arm/mach-tegra
    fixes from Russell King
	- include linux/io.h and linux/gpio.h instead of asm/io.h
	  and asm/gpio.h
    additional changes:
    	- add macros to convert between irq and gpio numbers for platform data
	- change for_each_bit to for_each_set_bit in gpio.c
v3:
	- minor bugfixes
Signed-off-by: NColin Cross <ccross@android.com>
Signed-off-by: NErik Gilling <konkers@android.com>

v2: fixes from Russell King:
	- include linux/io.h instead of asm/io.h
    fixes from Gary King:
	- remove extra (and incorrect) irq definitions
	- use timer 3 instead of timer 1 for compatibility with other drivers
	- fix typo that disabled oneshot mode
v3:
	- Implement sched_clock
	- Fix checkpatch issues
    fixes from Gary King:
    	- Fix incorrect cycles calculation
	- Fix min_delta_ns assignment
    fixes from Linus Walleij:
	- use calc_mult_shift() instead of hard coding values
Signed-off-by: NColin Cross <ccross@android.com>

Signed-off-by: NColin Cross <ccross@android.com>
Signed-off-by: NErik Gilling <konkers@android.com>

v2: fixes from Russell King:
	- include linux/io.h instead of asm/io.h
	- fix whitespace in Kconfig
	- Use spin_lock_init to initialize lock
	- Return -ENOSYS instead of BUG for unimplemented clock ops
	- Use proper return values in tegra2 clock ops
    additional changes:
	- Rename some clocks to match dev_ids
	- add rate propagation
	- add debugfs entries
	- add support for clock listed in clk_lookup under multiple dev_ids
v3:
	- Replace per-clock locking with global clock lock
	- Autodetect clock state on init
	- Let clock dividers pick next lower possible frequency
	- Add support for clock init tables
	- Minor bug fixes
	- Fix checkpatch issues
Signed-off-by: NColin Cross <ccross@android.com>

v2: fixes from Russell King
	- include linux/io.h instead of asm/io.h and mach/io.h
Signed-off-by: NColin Cross <ccross@android.com>
Signed-off-by: NErik Gilling <konkers@android.com>

v2: Fixes from Mike Rapoport
	- remove unused header files (mach/dma.h and mach/nand.h)
	- remove tegra 1 references from Makefile.boot

v2: fixes from Russell King
	- remove mach/io.h include from mach/iomap.h
	- fix whitespace in Kconfig

v2: from Colin Cross
	- fix invalid immediate in debug-macro.S

v3:
	- allow selection of multiple boards
Signed-off-by: NColin Cross <ccross@android.com>
Signed-off-by: NErik Gilling <konkers@android.com>

Not all the channels and slots available on the DM646x EVM
are used by the devices on the EVM. These resources can be
used by the DSP to speed up codec operations.

This patch reserves these channels for the DSP.
Signed-off-by: NSudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>

The drivers on da8xx/omapl EVMs do not utilize all the channels
and slots provided by EDMA. Some of these are better utilitzed by
the DSP on the SoC for speeding up codec operations.

Reserve these channels/slots for the DSP.
Signed-off-by: NSudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>

Current EDMA driver is not taking care of EDMA channels/slots
which are allocated from other processor, say DSP. If a
channel/slot is allocated from DSP, the existing EDMA driver
can still allocate the same resource on ARM.

This patch enables the user to pass the channel/slots reserved
for DSP as platform data. EDMA driver scans this list during
probe and prepares a bitmap of channel/slots which can be used
on ARM side.

Trying to reserve channels by doing a 'pre-allocate' using
edma_alloc_{slot|channel}() API does not work because

1) The reservation should be done in probe() to avoid race
   with other ARM side driver trying to use EDMA

2) The alloc channel API sets up the access through shadow region
   0 which will be incorrect for DSP usage. It also sets up the
   channel <-> queue number mapping which is not required as DSP
   will likely do its own mapping anyway.

3) (minor) There is no API to allocate channels in bulk.
Signed-off-by: NSudhakar Rajashekhara <sudhakar.raj@ti.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>

This patch modifies the EDMA driver to expect the channel
controller (CC) infomation passed on by the platform as a fixed
size (EDMA_MAX_CC) array of pointers to structures.

Doing so helps catch errors of the sort where the resource
structure has information for more channel controllers than
the number channel controller info structures defined.

Such insufficient platform data would lead to illegal memory
accesses.
Signed-off-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>

This patch helps get rid of the following sparse warnings
of the type:

  CHECK   arch/arm/mach-davinci/da830.c
arch/arm/mach-davinci/da830.c:1026:3: warning: Initializer entry defined twice
arch/arm/mach-davinci/da830.c:1027:3:   also defined here

coming from the irq priorities array init.

Apart from one instance of genuinie repetition, most are are instances
of multiple #defines of the same interrupt number. I have not
removed the multiple definitions from the irq.h file in the hope
that someone might decide to use them as shared interrupts at some
point of time. The priority initialization however needs to be done
only once and hence has been corrected.
Signed-off-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>

The register base address for the second serial port (UART1) was
wrong.
Signed-off-by: NThomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>

Now that ARM implements the notify die handlers, add the ability for
the kernel debugger to receive the notifications.
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
CC: Russell King <linux@arm.linux.org.uk>
CC: linux-arm-kernel@lists.infradead.org

Implement the ability to individually get and set registers for kdb
and kgdb for arm.
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
CC: Russell King <linux@arm.linux.org.uk>
CC: linux-arm-kernel@lists.infradead.org

With recent changes happened in OMAP2/3 DSS library for regulator interface, it
is required to define DSI regulator supply, without this DSS (in turn Fbdev)
fails to get regulator.
Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>

Currently the update area on manual update displays is automatically
enlargened to fully cover scaled overlays. This patch makes that
optional, allowing the panel driver to choose if it's used or not.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>

Remove kernel.h and module.h since they are not used correctly anyway.

Also, remove device.h since it comes along with platform_device.h
(always will I guess).
Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>

omap{1,2}-mailbox are modules that provide the 'omap-mailbox' driver.
Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>

Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>

No need to dynamically register mailboxes one by one.
Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>

It's more extensible this way.
Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>

Will be useful to identify them later.
Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>

Nobody is using them.
Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>

Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>

Based on omap2 code.
Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>

CONFIG_OMAP_DSP is not in mainline, CONFIG_OMAP_MBOX_FWK is.
Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>

Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>

OMAP4 ones messed up the organization.
Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>

And fix a few compilation warnings.
Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>

With this patch, you'll get the following sysfs directories. This
structure implies that a single platform device, "omap2-mailbox" holds
multiple logical mbox instances. This could be the base to add sysfs
files for each logical mboxes. Then userland application can access a
mbox through sysfs entries if necessary(ex: setting kfifo size
dynamically)

  ~# tree -d -L 2 /sys/devices/platform/omap2-mailbox/
  /sys/devices/platform/omap2-mailbox/
  |-- driver -> ../../../bus/platform/drivers/omap2-mailbox
  |-- mbox
  |   |-- dsp      <- they are each instances of logical mailbox.
  |   |-- ducati
  |   |-- iva2
  |   |-- mbox01
  |   |-- mbox02
  |   |-- mbox03
  |   |-- .....
  |   `-- tesla
  |-- power
  `-- subsystem -> ../../../bus/platform

This was wrongly dropped by:
     commit c7c158e5Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>

The underlying buffering implementation of mailbox
is converted from block API to kfifo due to the simplicity
and speed of kfifo.

The default size of the kfifo buffer is set to 256 bytes.
This value is configurable at compile time (via
CONFIG_OMAP_MBOX_KFIFO_SIZE), and can be changed at
runtime (via the mbox_kfifo_size module parameter).
Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com>
Signed-off-by: NHari Kanigeri <h-kanigeri2@ti.com>
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>

Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com>
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>

use multiple MODULE_AUTHOR lines for multiple authors
Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com>
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>

rwlocks are slower and have potential starvation issues
therefore spinlocks are generally preferred.

see also: http://lwn.net/Articles/364583/Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com>
Signed-off-by: NKanigeri Hari <h-kanigeri2@ti.com>
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>

when blk_get_request fails to get the request it is returning
without read the message from the mailbox fifo, then when it
leaves the isr and interruption is trigger again and again and
the workqueue which get elements from the request queue is never
executed and the kernel is stuck and shows a softlockup message.
Now the mailbox interrupt is disabled when request queue is full
and enabled when it pop a elememt form the request queue.
Signed-off-by: NFernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>

mailbox startup and shutdown are being executed against
a single H/W module, and a mailbox H/W module is totally
__independent__ of the registration of logical mailboxes.
So, an independent mutext should be used for startup and
shutdown.
Signed-off-by: NFernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>

This patch checks if the mailbox user has assinged a valid
callback fuction before calling it.
Signed-off-by: NFernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>