Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

There are many firmwares available for ADSP devices. Add basic support
for selecting between them, including a couple of feature sets in the
set of available firmware to start off with.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

WMDR coefficient files can specify coefficients in terms of algorithm
specific data regions. Record the start addresses of these regions while
parsing the algorithms and then use them to handle coefficients with
these formats.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

If we run into I/O problems the algorithm count may be crazy, validate it
before we proceed and dump the read data for diagnostic purposes.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

ADSP devices report information on the algorithms loaded on them.  Parse
this data and use it to allow coefficients to be configured for specific
algorithms.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Since VSP only has one power bit, only provide one DAPM widget.
Signed-off-by: NPaul Handrigan <Paul.Handrigan@cirrus.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Add power down delays between setting PDN and MCLKDIS for spk amp, spklo amp, and ear amp.
Signed-off-by: NPaul Handrigan <Paul.Handrigan@cirrus.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NPaul Handrigan <Paul.Handrigan@cirrus.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

The 'addr' field of the sigma_action struct is stored as big endian in the
firmware file.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: NBill Pemberton <wfp5p@virginia.edu>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: NBill Pemberton <wfp5p@virginia.edu>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: NBill Pemberton <wfp5p@virginia.edu>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: NBill Pemberton <wfp5p@virginia.edu>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Converted to use devm_gpio_request and devm_regulator_get APIs.
These are device managed and make error handling and cleanup
a bit simpler.

Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Useful for diagnostics.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

So the code to suppress duplicate changes is effective.

Reported-by: Kyung Kwee Ryu <Kyung-Kwee.Ryu@wolfsonmicro.comyu@wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Provide robustness against low quality FLL sync clocks by increasing the
timeout for lock to an absurdly high point; we should never get anywhere
near hitting the timeout in a real system unless it is failing.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Use of devm_regmap_init_spi does not require an explicit
regmap_exit call.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Allow custom accessory identification mechanisms to make use of the MICDET
support in the device.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

If we've got jack detection support then check that the jack is still
inserted when handling a mic IRQ in order to avoid transient reports
caused by shorts during the removal process as the two interrupts race
with each other.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Allow the user to override the accessory identification code with their
own implementation if the system provides an alternative method.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Currently the WM8994 driver allows the WM8958 microphone detection code to
be replaced in its entirety, providing a default implementation. This
doesn't actually reflect the needs of users well. They generally wish to
replace only the accessory identification parts of the algorithm (eg,
using an external GPIO to provide the equivalent of the JACKDET support in
the WM1811A).

In preparation for supporting these users better refactor the existing code
so that we have separate identification and button detection callbacks,
selecting between them rather than using the mic_detecting flag in the
existing callback. This also simplifies the code by introducing a more
explicit state machine for the detecting and button states.

In anticipation of future refactoring the callback is left in the signature
for wm8958_mic_detect(), it will be removed at a later stage.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Jack detection will not do anything to help us detect a microphone when
there is a fault in the cable and the debounce we have is enough to avoid
getting an intermediate result so halt microphone detection when we detect
that one is not present.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

For simplicity always run the DSP at the SYSCLK rate.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Turn off the ADSP memory when we aren't using it, saving a small amount of
power.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

devm_regmap_init_i2c() is device managed and makes error
handling and code cleanup simpler. There was no explicit
regmap_exit call in this function which was probably a bug.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

devm_regmap_init_i2c() is device managed and makes error
handling and code cleanup simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

devm_regmap_init_i2c() is device managed and makes error
handling and code cleanup simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

devm_regmap_init_i2c() is device managed and makes error
handling and code cleanup simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

devm_regmap_init_i2c() is device managed and makes error
handling and code cleanup simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

devm_regmap_init_i2c() is device managed and makes error
handling and code cleanup simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>