This prepares for Ebony/440 support by creating an
arch/powerpc/platforms/44x directory.  It is populated with a single
misc_44x.S file, into which is moved the 44x specific reset code from
head_44x.S (on the grounds that we should really stop clogging up the
head_* files with random asm helper routines).

At the same time, we disable the (empty save Kconfig and Makefile)
arch/powerpc/platforms/4xx directory from the arch/powerpc/platforms
Makefile.  Contrary to the comment in
arch/powerpc/platforms/4xx/Makefile, attempting to build such an empty
Makefile will fail, thus breaking compile for the 44x platforms we're
about to add.  It can go back in once we start porting some of the 40x
platforms (and thus it becomes non-empty).
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

MPIC U3/U4 MSI backend. Based on code from Segher, heavily hacked by me.
This only deals with MSI on U3/U4 MPICs, aka. CPC 9x5.

If we find a U3/U4 then we enable this backend, ie. take over the ppc_md
MSI hooks. We might need more elaborate logic in future to decide which
backend is enabled.

We need our own irq_chip so that we can do MSI masking/unmasking on
the device itself. We also need to mask explicitly on shutdown to make
sure we don't get bitten by lazy-disable semantics.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

To support MSI on MPIC we need a way to reserve and allocate hardware irq
numbers, this patch implements an allocator for that purpose.

New firmware platforms must define a "msi-available-ranges" property on their
MPIC node for MSI to work. For U3/U4 we do a best-guess setup.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

On some Apple machines the HT MSI mappings are not enabled by firmware, so
we need to do it by hand.

We can't use the pci routines as this code runs too early.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Tell Phyp we support MSI via the client architecture support mechanism.
Signed-off-by: NJake Moilanen <moilanen@austin.ibm.com>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Implement MSI support via RTAS (RTAS = run-time firmware on pSeries
machines).  For now we assumes that if the required RTAS tokens for
MSI are present, then we want to use the RTAS MSI routines.

When RTAS is managing MSIs for us, it will/may enable MSI on devices that
support it by default. This is contrary to the Linux model where a device
is in LSI mode until the driver requests MSIs.

To remedy this we add a pci_irq_fixup call, which disables MSI if they've
been assigned by firmware and the device also supports LSI. Devices that
don't support LSI at all will be left as is, drivers are still expected
to call pci_enable_msi() before using the device.

At the moment there is no pci_irq_fixup on pSeries, so we can just set it
unconditionally. If other platforms use the RTAS MSI backend they'll need
to check that still holds.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This provides the architecture specific hooks to support MSI on
powerpc.  We implement the newly added arch_setup_msi_irqs() and
arch_teardown_msi_irqs(), and then delegate to ppc_md routines.

Platforms that don't implement MSI will leave the ppc_md calls blank,
arch_msi_check_device() will detect this and return ENOSYS. Drivers
should detect this error and continue to use LSI.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Rip out the existing powerpc msi stubs. These were the start of an
implementation based on ppc_md calls, but were never used in mainline.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

For 32-bit systems, powerpc still relies on the 4level-fixup.h hack,
to pretend that the generic pagetable handling stuff is 3-levels
rather than 4.  This patch removes this, instead using the newer
pgtable-nopmd.h to handle the elision of both the pud and pmd
pagetable levels (ppc32 pagetables are actually 2 levels).

This removes a little extraneous code, and makes it more easily
compared to the 64-bit pagetable code.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Adds the pSeries platform implementation for a new PCI API
which can be used to issue various types of PCI-E reset,
including PCI-E warm reset and PCI-E hot reset. This is needed
for an ipr PCI-E adapter which does not properly implement BIST.
Running BIST on this adapter results in PCI-E errors. The only
reliable reset mechanism that exists on this hardware is PCI
Fundamental reset (warm reset).
Acked-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add Holly/Hickory bootwrapper
Signed-off-by: NStephen Winiecki <stevewin@us.ibm.com>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add Holly DTS file
Signed-off-by: NStephen Winiecki <stevewin@us.ibm.com>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Holly/Hickory defconfig
Signed-off-by: NStephen Winiecki <stevewin@us.ibm.com>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add PowerPC 750 Holly/Hickory platform support
Signed-off-by: NStephen Winiecki <stevewin@us.ibm.com>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Generalize tsi108_setup_pci to take the config space physical address and
primary bus designator as a parameter.
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add a phy_type field to the tsi108 ethernet structures to indicate which PHY
is used on a board.  This is derived from the "compatible" property in the
ethernet-phy node of the device tree.  The default remains the MV88E PHY.

Also, convert the setup code to use of_get_mac_address instead of hard coding
a lookup for the "address" property in the ethernet node.
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add a header file for the common PCI routines used for the TSI bridge
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The pseries PCI hotplug code cannot build as a module, unless
the pcibios_remove_pci_devices function is exported.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
----
 arch/powerpc/platforms/pseries/pci_dlpar.c |    1 +
 1 file changed, 1 insertion(+)
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The generic LED code now makes sure that suspended devices don't blink,
so we no longer need to do it ourselves. For the suspend to disk case,
however, we need to make sure that we don't blink if the PMU sysdev
was suspended before the LED device.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

reserve_mem() and stabs_alloc() are both called only from other __init
routines, so can be marked __init.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Currently our code to set up the data structures for a PCI host bridge
and create the mapping for its I/O window assumes that the window
starts at I/O port 0 on the PCI side.  If this is not true, we can end
up with I/O port numbers in the resources for PCI devices which will
cause an oops if a driver tries to access them via inb/outb etc.,
because there is no mapping for the corresponding addresses.

Normally the I/O window starts at 0, but there are some situations on
partitioned machines with a hypervisor where the window may not start
at 0.

This fixes the problem by allocating space for the range from 0 to the
end of the I/O window.  That is, hose->io_base_virt contains the
virtual address for I/O port 0 on the PCI bus, and thus the assumption
that hose->io_base_virt - pci_io_base is the offset between the
"global" I/O port numbers (those in the PCI device resources) and the
I/O port numbers on the PCI bus is maintained.

For PCI host bridges that are present at boot, we only map the portion
of that range that correspond to the bridge's I/O window.  For bridges
added after boot we ioremap the range from 0 to the end of the I/O
window, for now; in fact hot-added bridges should be using
reserve_phb_iospace() and __ioremap_explicit (so they get sensible
global port numbers), but we don't have the infrastructure yet to do
that (basically a free_phb_iospace() routine plus appropriate
locking).

Interestingly, this makes the two arms of the if statement in
get_bus_io_range do almost exactly the same thing; that function could
now be simplified in a further patch.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SCSI] esp_scsi: Fix section mismatch warnings.
  [VIDEO] sunxvr2500: Fix PCI device ID table.

More fallout from the removal of "struct subsystem" from the core device
model.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NMartin Habets <errandir_news@mph.eclipse.co.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Noticed by Meelis Roos.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] update memory attribute aliasing documentation & test cases
  [IA64] fail mmaps that span areas with incompatible attributes
  [IA64] allow WB /sys/.../legacy_mem mmaps
  [IA64] make ioremap avoid unsupported attributes
  [IA64] rename ioremap variables to match i386
  [IA64] relax per-cpu TLB requirement to DTC
  [IA64] remove per-cpu ia64_phys_stacked_size_p8
  [IA64] Fix example error injection program
  [IA64] Itanium MC Error Injection Tool: pal_mc_error_inject() interface
  [IA64] Itanium MC Error Injection Tool: Makefile changes
  [IA64] Itanium MC Error Injection Tool: Driver sysfs interface
  [IA64] Itanium MC Error Injection Tool: Doc and sample application
  [IA64] Itanium MC Error Injection Tool: Kernel configuration

* 'server-cluster-locking-api' of git://linux-nfs.org/~bfields/linux:
  gfs2: nfs lock support for gfs2
  lockd: add code to handle deferred lock requests
  lockd: always preallocate block in nlmsvc_lock()
  lockd: handle test_lock deferrals
  lockd: pass cookie in nlmsvc_testlock
  lockd: handle fl_grant callbacks
  lockd: save lock state on deferral
  locks: add fl_grant callback for asynchronous lock return
  nfsd4: Convert NFSv4 to new lock interface
  locks: add lock cancel command
  locks: allow {vfs,posix}_lock_file to return conflicting lock
  locks: factor out generic/filesystem switch from setlock code
  locks: factor out generic/filesystem switch from test_lock
  locks: give posix_test_lock same interface as ->lock
  locks: make ->lock release private data before returning in GETLK case
  locks: create posix-to-flock helper functions
  locks: trivial removal of unnecessary parentheses

The newly merged SLUB allocator patches had been generated before the
removal of "struct subsystem", and ended up applying fine, but wouldn't
build based on the current tree as a result.

Fix up that merge error - not that SLUB is likely really ready for
showtime yet, but at least I can fix the trivial stuff.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (34 commits)
  [GFS2] Uncomment sprintf_symbol calling code
  [DLM] lowcomms style
  [GFS2] printk warning fixes
  [GFS2] Patch to fix mmap of stuffed files
  [GFS2] use lib/parser for parsing mount options
  [DLM] Lowcomms nodeid range & initialisation fixes
  [DLM] Fix dlm_lowcoms_stop hang
  [DLM] fix mode munging
  [GFS2] lockdump improvements
  [GFS2] Patch to detect corrupt number of dir entries in leaf and/or inode blocks
  [GFS2] bz 236008: Kernel gpf doing cat /debugfs/gfs2/xxx (lock dump)
  [DLM] fs/dlm/ast.c should #include "ast.h"
  [DLM] Consolidate transport protocols
  [DLM] Remove redundant assignment
  [GFS2] Fix bz 234168 (ignoring rgrp flags)
  [DLM] change lkid format
  [DLM] interface for purge (2/2)
  [DLM] add orphan purging code (1/2)
  [DLM] split create_message function
  [GFS2] Set drop_count to 0 (off) by default
  ...

* 'drm-patches' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/i915: Add 965GM pci id update
  drm: just use io_remap_pfn_range on all archs..
  drm: fix DRM_CONSISTENT mapping
  drm: fix up mmap locking in preparation for ttm changes
  drm: fix driver deadlock with AIGLX and reclaim_buffers_locked
  drm: fix warning in drm_fops.c
  drm: allow for more generic drm ioctls
  drm: fix alpha domain handling
  via: fix CX700 pci id
  drm: make drm_io_prot static.
  drm: remove via_mm.h
  drm: add missing NULL assignment
  drm/radeon: Fix u32 overflows when determining AGP base address in card space.
  drm: port over use_vmalloc code from git hashtab
  drm: fix crash with fops lock and fixup sarea/page size locking
  drm: bring bufs code from git tree.
  drm: move protection stuff into separate function
  drm: Use ARRAY_SIZE macro when appropriate
  drm: update README.drm (bugzilla #7933)
  drm: remove unused exports

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NET]: rfkill: add support for input key to control wireless radio
  [NET] net/core: Fix error handling
  [TG3]: Update version and reldate.
  [TG3]: Eliminate spurious interrupts.
  [TG3]: Add ASPM workaround.
  [Bluetooth] Correct SCO buffer for another Broadcom based dongle
  [Bluetooth] Add support for Targus ACB10US USB dongle
  [Bluetooth] Disconnect L2CAP connection after last RFCOMM DLC
  [Bluetooth] Check that device is in rfcomm_dev_list before deleting
  [Bluetooth] Use in-kernel sockets API
  [Bluetooth] Attach host adapters to the Bluetooth bus
  [Bluetooth] Fix L2CAP and HCI setsockopt() information leaks

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SERIAL] sunsu: Fix section mismatch warnings.
  [SPARC64]: pgtable_cache_init() should be __init.
  [SPARC64]: Fix section mismatch warnings in arch/sparc64/kernel/prom.c
  [SPARC64]: Fix section mismatch warnings in arch/sparc64/kernel/pci.c
  [SPARC64]: Fix section mismatch warnings in arch/sparc64/kernel/console.c
  [MM]: sparse_init() should be __init.
  [SPARC64]: Update defconfig.
  [VIDEO]: Add Sun XVR-2500 framebuffer driver.
  [VIDEO]: Add Sun XVR-500 framebuffer driver.
  [SPARC64]: SUN4U PCI-E controller support.
  [SPARC]: Fix comment typo in smp4m_blackbox_current().
  [SCSI] SUNESP: sun_esp.c needs linux/delay.h

Fix up conflict in arch/sparc64/mm/init.c manually due to removal of
pgtable_cache_init() through the -mm patches (even though that patch was
also by David ;)
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IPoIB: Convert to NAPI
  IB: Return "maybe missed event" hint from ib_req_notify_cq()
  IB: Add CQ comp_vector support
  IB/ipath: Fix a race condition when generating ACKs
  IB/ipath: Fix two more spin lock problems
  IB/fmr_pool: Add prefix to all printks
  IB/srp: Set proc_name
  IB/srp: Add orig_dgid sysfs attribute to scsi_host
  IPoIB/cm: Don't crash if remote side uses one QP for both directions
  RDMA/cxgb3: Support for new abort logic
  RDMA/cxgb3: Initialize cpu_idx field in cpl_close_listserv_req message
  RDMA/cxgb3: Fail qp creation if the requested max_inline is too large
  RDMA/cxgb3: Fix TERM codes
  IPoIB/cm: Fix error handling in ipoib_cm_dev_open()
  IB/ipath: Don't corrupt pending mmap list when unmapped objects are freed
  IB/mthca: Work around kernel QP starvation
  IB/ipath: Don't put QP in timeout queue if waiting to send
  IB/ipath: Don't call spin_lock_irq() from interrupt context

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (38 commits)
  sh: R7785RP board updates.
  sh: Update r7780rp defconfig.
  sh: Add die chain notifiers.
  sh: Fix APM emulation on hp6xx.
  sh: Wire up more IRQs for SH7709.
  sh: Solution Engine 7722 board support.
  sh: Fix r7780rp build.
  sh: kdump support.
  sh: Move clock reporting to its own proc entry.
  sh: Solution Engine SH7705 board and CPU updates.
  serial: sh-sci: Fix module clock refcount for serial console.
  serial: sh-sci: Fix module clock refcounting.
  sh: SH7722 clock framework support.
  sh: hp6xx pata_platform support.
  sh: Obey CONFIG_HZ for HZ definition.
  sh: Fix fstatat64() syscall.
  sh: se7780 PCI support.
  sh: SH7780 Solution Engine board support.
  sh: Add a dummy SH-4 PCIC fixup.
  sh: Tidy up L-BOX area5 addresses.
  ...

Commit a836f585 removes the shutdown
member of the bitbang structure, breaking the build of spi_s3c24xx.c.
Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Rename config for TANBAC TB0219 GPIO support to something more appropriate.

Fixes this:

drivers/char/Kconfig:906:warning: type of 'TANBAC_TB0219' redefined from 'boolean' to 'tristate'
drivers/char/Kconfig:907:warning: choice values currently only support a single
prompt
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As seen on powerpc-cell et al:

  CC [M]  drivers/usb/host/ehci-hcd.o
In file included from drivers/usb/host/ehci-hcd.c:941:
drivers/usb/host/ehci-ps3.c:79: error: conflicting types for 'dev_dbg'
include/linux/device.h:576: error: previous definition of 'dev_dbg' was here
make[4]: *** [drivers/usb/host/ehci-hcd.o] Error 1
  CC [M]  drivers/usb/host/ohci-hcd.o
In file included from drivers/usb/host/ohci-hcd.c:921:
drivers/usb/host/ohci-ps3.c:83: error: conflicting types for 'dev_dbg'
include/linux/device.h:576: error: previous definition of 'dev_dbg' was here

dev_dbg() will check format string for you in dummy case also, so remove
buggers.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greg KH <greg@kroah.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The last zlib_inflate update broke certain corner cases for ppp_deflate
decompression handling.  This patch fixes some logic to make things work
properly again.  Users other than ppp_deflate (the only Z_PACKET_FLUSH
user) should be unaffected.

Fixes bug 8405 (confirmed by Stefan)
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Cc: Stefan Wenk <stefan.wenk@gmx.at>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

alpha:

drivers/media/video/cx88/cx88-video.c: In function 'cx8800_initdev':
drivers/media/video/cx88/cx88-video.c:1782: error: 'DMA_32BIT_MASK' undeclared (first use in this function)
drivers/media/video/cx88/cx88-video.c:1782: error: (Each undeclared identifier is reported only once
drivers/media/video/cx88/cx88-video.c:1782: error: for each function it appears in.)

Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>