- 11 6月, 2014 6 次提交
-
-
由 Linus Lüssing 提交于
Adding bridge support to the batman-adv multicast optimization requires batman-adv knowing about the existence of bridged-in IGMP/MLD queriers to be able to reliably serve any multicast listener behind this same bridge. Signed-off-by: NLinus Lüssing <linus.luessing@web.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Lüssing 提交于
With this new, exported function br_multicast_list_adjacent(net_dev) a list of IPv4/6 addresses is returned. This list contains all multicast addresses sensed by the bridge multicast snooping feature on all bridge ports of the bridge interface of net_dev, excluding addresses from the specified net_device itself. Adding bridge support to the batman-adv multicast optimization requires batman-adv knowing about the existence of bridged-in multicast listeners to be able to reliably serve them with multicast packets. Signed-off-by: NLinus Lüssing <linus.luessing@web.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Lüssing 提交于
MLDv1 (RFC2710 section 6), MLDv2 (RFC3810 section 7.6.2), IGMPv2 (RFC2236 section 3) and IGMPv3 (RFC3376 section 6.6.2) specify that the querier with lowest source address shall become the selected querier. So far the bridge stopped its querier as soon as it heard another querier regardless of its source address. This results in the "wrong" querier potentially becoming the active querier or a potential, unnecessary querying delay. With this patch the bridge memorizes the source address of the currently selected querier and ignores queries from queriers with a higher source address than the currently selected one. This slight optimization is supposed to make it more RFC compliant (but is rather uncritical and therefore probably not necessary to be queued for stable kernels). Signed-off-by: NLinus Lüssing <linus.luessing@web.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Lüssing 提交于
The current naming of these two structs is very random, in that reversing their naming would not make any semantical difference. This patch tries to make the naming less confusing by giving them a more specific, distinguishable naming. This is also useful for the upcoming patches reintroducing the "struct bridge_mcast_querier" but for storing information about the selected querier (no matter if our own or a foreign querier). Signed-off-by: NLinus Lüssing <linus.luessing@web.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
There is no need to require forcing device down on a Ethernet GRE (gretap) tunnel to change the MAC address. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Octavian Purdila 提交于
tcp_fragment can be called from process context (from tso_fragment). Add a new gfp parameter to allow it to preserve atomic memory if possible. Signed-off-by: NOctavian Purdila <octavian.purdila@intel.com> Reviewed-by: NChristoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 6月, 2014 1 次提交
-
-
由 Phoebe Buckheister 提交于
During key removal, the key object is freed, but not taken out of the llsec key list properly. Fix that. Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 6月, 2014 4 次提交
-
-
由 Sven Wegener 提交于
To avoid the confusion of having two variables, shrink the function to only use the parameter variable for looping. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: NSven Wegener <sven.wegener@stealer.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexei Starovoitov 提交于
BPF classic->internal converter broke SKF_AD_PKTTYPE extension, since pkt_type_offset() was failing to find skb->pkt_type field which is defined as: __u8 pkt_type:3, fclone:2, ipvs_property:1, peeked:1, nf_trace:1; Fix it by searching for 3 most significant bits and shift them by 5 at run-time Fixes: bd4cf0ed ("net: filter: rework/optimize internal BPF interpreter's instruction set") Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com> Acked-by: NDaniel Borkmann <dborkman@redhat.com> Tested-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Toshiaki Makita 提交于
br_manage_promisc() incorrectly expects br_auto_port() to return only 0 or 1, while it actually returns flags, i.e., a subset of BR_AUTO_MASK. Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Horman 提交于
If an MPLS packet requires segmentation then use mpls_features to determine if the software implementation should be used. As no driver advertises MPLS GSO segmentation this will always be the case. I had not noticed that this was necessary before as software MPLS GSO segmentation was already being used in my test environment. I believe that the reason for that is the skbs in question always had fragments and the driver I used does not advertise NETIF_F_FRAGLIST (which seems to be the case for most drivers). Thus software segmentation was activated by skb_gso_ok(). This introduces the overhead of an extra call to skb_network_protocol() in the case where where CONFIG_NET_MPLS_GSO is set and skb->ip_summed == CHECKSUM_NONE. Thanks to Jesse Gross for prompting me to investigate this. Signed-off-by: NSimon Horman <horms@verge.net.au> Acked-by: NYAMAMOTO Takashi <yamamoto@valinux.co.jp> Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 6月, 2014 12 次提交
-
-
由 WANG Cong 提交于
Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
It is available since v3.15-rc5. Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manuel Schölling 提交于
According to RFC1035 "[...] the total length of a domain name (i.e., label octets and label length octets) is restricted to 255 octets or less." Signed-off-by: NManuel Schölling <manuel.schoelling@gmx.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Added VXLAN link configuration for sending UDP checksums, and allowing TX and RX of UDP6 checksums. Also, call common iptunnel_handle_offloads and added GSO support for checksums. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Call gso_make_checksum. This should have the benefit of using a checksum that may have been previously computed for the packet. This also adds NETIF_F_GSO_GRE_CSUM to differentiate devices that offload GRE GSO with and without the GRE checksum offloaed. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Added a new netif feature for GSO_UDP_TUNNEL_CSUM. This indicates that a device is capable of computing the UDP checksum in the encapsulating header of a UDP tunnel. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Call common gso_make_checksum when calculating checksum for a TCP GSO segment. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
When creating a GSO packet segment we may need to set more than one checksum in the packet (for instance a TCP checksum and UDP checksum for VXLAN encapsulation). To be efficient, we want to do checksum calculation for any part of the packet at most once. This patch adds csum_start offset to skb_gso_cb. This tracks the starting offset for skb->csum which is initially set in skb_segment. When a protocol needs to compute a transport checksum it calls gso_make_checksum which computes the checksum value from the start of transport header to csum_start and then adds in skb->csum to get the full checksum. skb->csum and csum_start are then updated to reflect the checksum of the resultant packet starting from the transport header. This patch also adds a flag to skbuff, encap_hdr_csum, which is set in *gso_segment fucntions to indicate that a tunnel protocol needs checksum calculation Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Call common functions to set checksum for UDP tunnel. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Added udp_set_csum and udp6_set_csum functions to set UDP checksums in packets. These are for simple UDP packets such as those that might be created in UDP tunnels. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sven Wegener 提交于
Commit efe4208f ("ipv6: make lookups simpler and faster") introduced a regression in udp_v6_mcast_next(), resulting in multicast packets not reaching the destination sockets under certain conditions. The packet's IPv6 addresses are wrongly compared to the IPv6 addresses from the function's socket argument, which indicates the starting point for looping, instead of the loop variable. If the addresses from the first socket do not match the packet's addresses, no socket in the list will match. Signed-off-by: NSven Wegener <sven.wegener@stealer.net> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sasha Levin 提交于
This reverts commit 30f38d2f. fib_triestat is surrounded by a big lie: while it claims that it's a seq_file (fib_triestat_seq_open, fib_triestat_seq_show), it isn't: static const struct file_operations fib_triestat_fops = { .owner = THIS_MODULE, .open = fib_triestat_seq_open, .read = seq_read, .llseek = seq_lseek, .release = single_release_net, }; Yes, fib_triestat is just a regular file. A small detail (assuming CONFIG_NET_NS=y) is that while for seq_files you could do seq_file_net() to get the net ptr, doing so for a regular file would be wrong and would dereference an invalid pointer. The fib_triestat lie claimed a victim, and trying to show the file would be bad for the kernel. This patch just reverts the issue and fixes fib_triestat, which still needs a rewrite to either be a seq_file or stop claiming it is. Signed-off-by: NSasha Levin <sasha.levin@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 6月, 2014 3 次提交
-
-
由 WANG Cong 提交于
When we jump to free_pcpu on failure in alloc_netdev_mqs() rx and tx queues are not yet allocated, so no need to free them. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cong Wang 提交于
It is possible that ->newlink() fails before registering the device, in this case we should just free it, it's safe to call free_netdev(). Fixes: commit 0e0eee24 (net: correct error path in rtnl_newlink()) Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NCong Wang <cwang@twopensource.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Kubecek 提交于
The xfrm_user module registers its pernet init/exit after xfrm itself so that its net exit function xfrm_user_net_exit() is executed before xfrm_net_exit() which calls xfrm_state_fini() to cleanup the SA's (xfrm states). This opens a window between zeroing net->xfrm.nlsk pointer and deleting all xfrm_state instances which may access it (via the timer). If an xfrm state expires in this window, xfrm_exp_state_notify() will pass null pointer as socket to nlmsg_multicast(). As the notifications are called inside rcu_read_lock() block, it is sufficient to retrieve the nlsk socket with rcu_dereference() and check the it for null. Signed-off-by: NMichal Kubecek <mkubecek@suse.cz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 6月, 2014 14 次提交
-
-
由 Ben Hutchings 提交于
We should fail rather than silently ignoring use of these extensions. Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
-
由 Ben Hutchings 提交于
ETHTOOL_{G,S}RXFHINDIR and ETHTOOL_{G,S}RSSH should work for drivers regardless of whether they expose the hash key, unless you try to set a hash key for a driver that doesn't expose it. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Roopa Prabhu 提交于
(This patch was previously posted as RFC at http://patchwork.ozlabs.org/patch/352677/) This patch adds NDA_MASTER attribute to neighbour attributes enum for bridge/master ifindex. And adds NDA_MASTER to bridge fdb notify msgs. Today bridge fdb notifications dont contain bridge information. Userspace can derive it from the port information in the fdb notification. However this is tricky in some scenarious. Example, bridge port delete notification comes before bridge fdb delete notifications. And we have seen problems in userspace when using libnl where, the bridge fdb delete notification handling code does not understand which bridge this fdb entry is part of because the bridge and port association has already been deleted. And these notifications (port membership and fdb) are generated on separate rtnl groups. Fixing the order of notifications could possibly solve the problem for some cases (I can submit a separate patch for that). This patch chooses to add NDA_MASTER to bridge fdb notify msgs because it not only solves the problem described above, but also helps userspace avoid another lookup into link msgs to derive the master index. Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Leon Yu 提交于
__sk_prepare_filter() was reworked in commit bd4cf0ed (net: filter: rework/optimize internal BPF interpreter's instruction set) so that it should have uncharged memory once things went wrong. However that work isn't complete. Error is handled only in __sk_migrate_filter() while memory can still leak in the error path right after sk_chk_filter(). Fixes: bd4cf0ed ("net: filter: rework/optimize internal BPF interpreter's instruction set") Signed-off-by: NLeon Yu <chianglungyu@gmail.com> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Tested-by: NAlexei Starovoitov <ast@plumgrid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuchung Cheng 提交于
This bug is discovered by an recent F-RTO issue on tcpm list https://www.ietf.org/mail-archive/web/tcpm/current/msg08794.html The bug is that currently F-RTO does not use DSACK to undo cwnd in certain cases: upon receiving an ACK after the RTO retransmission in F-RTO, and the ACK has DSACK indicating the retransmission is spurious, the sender only calls tcp_try_undo_loss() if some never retransmisted data is sacked (FLAG_ORIG_DATA_SACKED). The correct behavior is to unconditionally call tcp_try_undo_loss so the DSACK information is used properly to undo the cwnd reduction. Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Make fib_triestat_seq_show consistent with other /proc/net files and use seq_file_net. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
It was possible to get a setuid root or setcap executable to write to it's stdout or stderr (which has been set made a netlink socket) and inadvertently reconfigure the networking stack. To prevent this we check that both the creator of the socket and the currentl applications has permission to reconfigure the network stack. Unfortunately this breaks Zebra which always uses sendto/sendmsg and creates it's socket without any privileges. To keep Zebra working don't bother checking if the creator of the socket has privilege when a destination address is specified. Instead rely exclusively on the privileges of the sender of the socket. Note from Andy: This is exactly Eric's code except for some comment clarifications and formatting fixes. Neither I nor, I think, anyone else is thrilled with this approach, but I'm hesitant to wait on a better fix since 3.15 is almost here. Note to stable maintainers: This is a mess. An earlier series of patches in 3.15 fix a rather serious security issue (CVE-2014-0181), but they did so in a way that breaks Zebra. The offending series includes: commit aa4cf945 Author: Eric W. Biederman <ebiederm@xmission.com> Date: Wed Apr 23 14:28:03 2014 -0700 net: Add variants of capable for use on netlink messages If a given kernel version is missing that series of fixes, it's probably worth backporting it and this patch. if that series is present, then this fix is critical if you care about Zebra. Cc: stable@vger.kernel.org Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndy Lutomirski <luto@amacapital.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
I noticed we were sending wrong IPv4 ID in TCP flows when MTU discovery is disabled. Note how GSO/TSO packets do not have monotonically incrementing ID. 06:37:41.575531 IP (id 14227, proto: TCP (6), length: 4396) 06:37:41.575534 IP (id 14272, proto: TCP (6), length: 65212) 06:37:41.575544 IP (id 14312, proto: TCP (6), length: 57972) 06:37:41.575678 IP (id 14317, proto: TCP (6), length: 7292) 06:37:41.575683 IP (id 14361, proto: TCP (6), length: 63764) It appears I introduced this bug in linux-3.1. inet_getid() must return the old value of peer->ip_id_count, not the new one. Lets revert this part, and remove the prevention of a null identification field in IPv6 Fragment Extension Header, which is dubious and not even done properly. Fixes: 87c48fa3 ("ipv6: make fragment identifications less predictable") Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Toshiaki Makita 提交于
br_handle_local_finish() is allowing us to insert an FDB entry with disallowed vlan. For example, when port 1 and 2 are communicating in vlan 10, and even if vlan 10 is disallowed on port 3, port 3 can interfere with their communication by spoofed src mac address with vlan id 10. Note: Even if it is judged that a frame should not be learned, it should not be dropped because it is destined for not forwarding layer but higher layer. See IEEE 802.1Q-2011 8.13.10. Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: NVlad Yasevich <vyasevic@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Ideally, we would need to generate IP ID using a per destination IP generator. linux kernels used inet_peer cache for this purpose, but this had a huge cost on servers disabling MTU discovery. 1) each inet_peer struct consumes 192 bytes 2) inetpeer cache uses a binary tree of inet_peer structs, with a nominal size of ~66000 elements under load. 3) lookups in this tree are hitting a lot of cache lines, as tree depth is about 20. 4) If server deals with many tcp flows, we have a high probability of not finding the inet_peer, allocating a fresh one, inserting it in the tree with same initial ip_id_count, (cf secure_ip_id()) 5) We garbage collect inet_peer aggressively. IP ID generation do not have to be 'perfect' Goal is trying to avoid duplicates in a short period of time, so that reassembly units have a chance to complete reassembly of fragments belonging to one message before receiving other fragments with a recycled ID. We simply use an array of generators, and a Jenkin hash using the dst IP as a key. ipv6_select_ident() is put back into net/ipv6/ip6_output.c where it belongs (it is only used from this file) secure_ip_id() and secure_ipv6_id() no longer are needed. Rename ip_select_ident_more() to ip_select_ident_segs() to avoid unnecessary decrement/increment of the number of segments. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This change provides a function to be used in order to break the ndo_set_rx_mode call into a set of address add and remove calls. The code is based on the implementation of dev_uc_sync/dev_mc_sync. Since they essentially do the same thing but with only one dev I simply named my functions __dev_uc_sync/__dev_mc_sync. I also implemented an unsync version of the functions as well to allow for cleanup on close. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Aring 提交于
This patch fix a off by one error while fragmentation. If the frag_cap value is equal to skb_unprocessed value we need to stop the fragmentation loop because the last fragment which has a size of skb_unprocessed fits into the frag capability size. This issue was introduced by commit d4b2816d ("6lowpan: fix fragmentation"). Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Aring 提交于
This patch fix the 6LoWPAN fragmentation for the case if we have exactly two fragments. The problem is that the (skb_unprocessed >= frag_cap) condition is always false on the second fragment after sending the first fragment. A fragmentation with only one fragment doesn't make any sense. The solution is that we use a do while loop here, that ensures we sending always a minimum of two fragments if we need a fragmentation. This issue was introduced by commit d4b2816d ("6lowpan: fix fragmentation"). Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis ChengRq 提交于
the local variable ops and n_ops were just read out from family, and not changed, hence no need to assign back. Validation functions should operate on const parameters and not change anything. Signed-off-by: NCheng Renquan <crquan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-