This patch adds a helper function that allows to modify range,
i.e. minimum, maximum, step and default value of a v4l2 control,
after the control has been created and initialized. This is helpful
in situations when range of a control depends on user configurable
parameters, e.g. camera sensor absolute exposure time depending on
an output image resolution and frame rate.
v4l2_ctrl_modify_range() function allows to modify range of an
INTEGER, BOOL, MENU, INTEGER_MENU and BITMASK type controls.
Based on a patch from Hans Verkuil http://patchwork.linuxtv.org/patch/8654.
Signed-off-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The DVBv3 statistics parameters are limited on several ways:
        - It doesn't provide any way to indicate the used measure,
	  so userspace need to guess how to calculate/use it;
        - Only a limited set of stats are supported;
        - Can't be called in a way to require them to be filled
          all at once (atomic reads from the hardware), with may
          cause troubles on interpreting them on userspace;
        - On some OFDM delivery systems, the carriers can be
          independently modulated, having different properties.
          Currently, there's no way to report per-layer stats.
To address the above issues, adding a new DVBv5-based stats API.
While here, correct inner code nomenclature on a few places.
Reviewed-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This is an executable file. Change permissions to reflect it.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Improve the documentation to clarify level vs edge triggered power off.
Improve the comments for level vs edge triggered power off.
Make use of gpio_is_valid().
Reported-by: NStephen Warren <swarren@wwwdotorg.org>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

Signed-off-by: NLad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

It has been over 3 years since the V4L2_CID_[HV]CENTER were deprecated.
Clean up the DocBook and remove the V4L2_CID_VCENTER_DEPRECATED,
V4L2_CID_VCENTER_DEPRECATED control related paragraphs.
Remove the V4L2_CID_[HV]CENTER controls definitions from v4l2-controls.h,
these controls are not used by any driver in the mainline now.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Currently, the PM core disables runtime PM for all devices right
after executing subsystem/driver .suspend() callbacks for them
and re-enables it right before executing subsystem/driver .resume()
callbacks for them.  This may lead to problems when there are
two devices such that the .suspend() callback executed for one of
them depends on runtime PM working for the other.  In that case,
if runtime PM has already been disabled for the second device,
the first one's .suspend() won't work correctly (and analogously
for resume).

To make those issues go away, make the PM core disable runtime PM
for devices right before executing subsystem/driver .suspend_late()
callbacks for them and enable runtime PM for them right after
executing subsystem/driver .resume_early() callbacks for them.  This
way the potential conflitcs between .suspend_late()/.resume_early()
and their runtime PM counterparts are still prevented from happening,
but the subtle ordering issues related to disabling/enabling runtime
PM for devices during system suspend/resume are much easier to avoid.
Reported-and-tested-by: NJan-Matthias Braun <jan_braun@gmx.net>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org>
Reviewed-by: NKevin Hilman <khilman@deeprootsystems.com>
Cc: 3.4+ <stable@vger.kernel.org>

Sometimes platform/bridge drivers need to be notified when a control from
a sub-device changes value. In order to support this a notify callback was
added.
[dheitmueller@kernellabs.com: fix merge conflict in v4l2-ctrls.c]
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NCarlos Alberto Lopez Perez <clopez@igalia.com>
Cc: Rob Landley <rob@landley.net>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add 3 new variables and sysctls to tune them (by one "next_id" variable
for messages, semaphores and shared memory respectively).  This variable
can be used to set desired id for next allocated IPC object.  By default
it's equal to -1 and old behaviour is preserved.  If this variable is
non-negative, then desired idr will be extracted from it and used as a
start value to search for free IDR slot.

Notes:

1) this patch doesn't guarantee that the new object will have desired
   id.  So it's up to user space how to handle new object with wrong id.

2) After a sucessful id allocation attempt, "next_id" will be set back
   to -1 (if it was non-negative).

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I slipped in a new sysctl without proper documentation. I would like to
make up for this now.
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

'clock-output-names' is not used in any of the dts/dtsi files for i.mx.

Remove it from the examples, so that the example and the real usage in the
dtsi files can match.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from the kernel documentation.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add DT support for twl4030_wdt. This is needed to get twl4030_wdt to
probe when booting with DT.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Fix firmware download for the Terratec Cinergy HTC Stick HD. The file
was moved on the server.
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add an entry to download the dvb-usb-vp7049-0.95.fw firmware for the
Twinhan vp7049 and similar devices.
Known devices of this kind are:
  Twinhan/Azurewave DTV-DVB UDTT7049
  Digicom Digitune-S
  Think Xtra Hollywood DVB-T USB2.0
Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

commit 7bec2074 remove sirfsoc_gpio_set_pull function,
this patches takes the feature back by adding sirf,pullups and
sirf,pulldowns prop in dts, and the driver will set the GPIO
pull according to the dts.

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NBarry Song <Baohua.Song@csr.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

While sending email to Linus for reviewing:
"pinctrl: sirf: add DT-binding pinmux mapping support"
https://patchwork.kernel.org/patch/1364361/

i have included the devicetree/bindings/pinctrl/pinctrl-sirf.txt

But while sending pull request with commit 056876f6,
i missed the document.

this patch takes the document back.
Signed-off-by: NBarry Song <Baohua.Song@csr.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

When the v4l1 drivers were removed, there docs were forgotten.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch adds definition of media bus code for YUV pixel format
transferred in 30-bit samples where each component has 10 bits width.

[mchehab@redhat.com: fix a merge conflict at v4l2-mediabus.h]
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Correct a typo. v4l2_plane.m.userptr is unsigned long, not __unsigned long.
Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Define video buffer flags for different timestamp types. Everything up to
now have used either realtime clock or monotonic clock, without a way to
tell which clock the timestamp was taken from.
Also document that the clock source of the timestamp in the timestamp field
depends on buffer flags.

[mchehab@redhat.com: fix a few wrong references to Kernel 3.8 - as this patch
 is meant for 3.9]
Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This file is already documented in the stable ABI (see commit
5bbe1ec1).
Signed-off-by: NDavidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Greg KH <greg@kroah.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove the documentation for capability.disable.  The code supporting
this parameter was removed with commit 5915eb53 ("security: remove
dummy module")
Signed-off-by: NJosh Boyer <jwboyer@redhat.com>
Acked-by: NSerge Hallyn <serge.hallyn@canonical.com>
Cc: Rob Landley <rob@landley.net>
Cc: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Removed vmtruncate
Signed-off-by: NMarco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Provide a proper invalidation method rather than relying on the netfs retiring
the cookie it has and getting a new one.  The problem with this is that isn't
easy for the netfs to make sure that it has completed/cancelled all its
outstanding storage and retrieval operations on the cookie it is retiring.

Instead, have the cache provide an invalidation method that will cancel or wait
for all currently outstanding operations before invalidating the cache, and
will cause new operations to queue up behind that.  Whilst invalidation is in
progress, some requests will be rejected until the cache can stack a barrier on
the operation queue to cause new operations to be deferred behind it.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Fix the state management of internal fscache operations and the accounting of
what operations are in what states.

This is done by:

 (1) Give struct fscache_operation a enum variable that directly represents the
     state it's currently in, rather than spreading this knowledge over a bunch
     of flags, who's processing the operation at the moment and whether it is
     queued or not.

     This makes it easier to write assertions to check the state at various
     points and to prevent invalid state transitions.

 (2) Add an 'operation complete' state and supply a function to indicate the
     completion of an operation (fscache_op_complete()) and make things call
     it.  The final call to fscache_put_operation() can then check that an op
     in the appropriate state (complete or cancelled).

 (3) Adjust the use of object->n_ops, ->n_in_progress, ->n_exclusive to better
     govern the state of an object:

	(a) The ->n_ops is now the number of extant operations on the object
	    and is now decremented by fscache_put_operation() only.

	(b) The ->n_in_progress is simply the number of objects that have been
	    taken off of the object's pending queue for the purposes of being
	    run.  This is decremented by fscache_op_complete() only.

	(c) The ->n_exclusive is the number of exclusive ops that have been
	    submitted and queued or are in progress.  It is decremented by
	    fscache_op_complete() and by fscache_cancel_op().

     fscache_put_operation() and fscache_operation_gc() now no longer try to
     clean up ->n_exclusive and ->n_in_progress.  That was leading to double
     decrements against fscache_cancel_op().

     fscache_cancel_op() now no longer decrements ->n_ops.  That was leading to
     double decrements against fscache_put_operation().

     fscache_submit_exclusive_op() now decides whether it has to queue an op
     based on ->n_in_progress being > 0 rather than ->n_ops > 0 as the latter
     will persist in being true even after all preceding operations have been
     cancelled or completed.  Furthermore, if an object is active and there are
     runnable ops against it, there must be at least one op running.

 (4) Add a remaining-pages counter (n_pages) to struct fscache_retrieval and
     provide a function to record completion of the pages as they complete.

     When n_pages reaches 0, the operation is deemed to be complete and
     fscache_op_complete() is called.

     Add calls to fscache_retrieval_complete() anywhere we've finished with a
     page we've been given to read or allocate for.  This includes places where
     we just return pages to the netfs for reading from the server and where
     accessing the cache fails and we discard the proposed netfs page.

The bugs in the unfixed state management manifest themselves as oopses like the
following where the operation completion gets out of sync with return of the
cookie by the netfs.  This is possible because the cache unlocks and returns
all the netfs pages before recording its completion - which means that there's
nothing to stop the netfs discarding them and returning the cookie.


FS-Cache: Cookie 'NFS.fh' still has outstanding reads
------------[ cut here ]------------
kernel BUG at fs/fscache/cookie.c:519!
invalid opcode: 0000 [#1] SMP
CPU 1
Modules linked in: cachefiles nfs fscache auth_rpcgss nfs_acl lockd sunrpc

Pid: 400, comm: kswapd0 Not tainted 3.1.0-rc7-fsdevel+ #1090                  /DG965RY
RIP: 0010:[<ffffffffa007050a>]  [<ffffffffa007050a>] __fscache_relinquish_cookie+0x170/0x343 [fscache]
RSP: 0018:ffff8800368cfb00  EFLAGS: 00010282
RAX: 000000000000003c RBX: ffff880023cc8790 RCX: 0000000000000000
RDX: 0000000000002f2e RSI: 0000000000000001 RDI: ffffffff813ab86c
RBP: ffff8800368cfb50 R08: 0000000000000002 R09: 0000000000000000
R10: ffff88003a1b7890 R11: ffff88001df6e488 R12: ffff880023d8ed98
R13: ffff880023cc8798 R14: 0000000000000004 R15: ffff88003b8bf370
FS:  0000000000000000(0000) GS:ffff88003bd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000000008ba008 CR3: 0000000023d93000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process kswapd0 (pid: 400, threadinfo ffff8800368ce000, task ffff88003b8bf040)
Stack:
 ffff88003b8bf040 ffff88001df6e528 ffff88001df6e528 ffffffffa00b46b0
 ffff88003b8bf040 ffff88001df6e488 ffff88001df6e620 ffffffffa00b46b0
 ffff88001ebd04c8 0000000000000004 ffff8800368cfb70 ffffffffa00b2c91
Call Trace:
 [<ffffffffa00b2c91>] nfs_fscache_release_inode_cookie+0x3b/0x47 [nfs]
 [<ffffffffa008f25f>] nfs_clear_inode+0x3c/0x41 [nfs]
 [<ffffffffa0090df1>] nfs4_evict_inode+0x2f/0x33 [nfs]
 [<ffffffff810d8d47>] evict+0xa1/0x15c
 [<ffffffff810d8e2e>] dispose_list+0x2c/0x38
 [<ffffffff810d9ebd>] prune_icache_sb+0x28c/0x29b
 [<ffffffff810c56b7>] prune_super+0xd5/0x140
 [<ffffffff8109b615>] shrink_slab+0x102/0x1ab
 [<ffffffff8109d690>] balance_pgdat+0x2f2/0x595
 [<ffffffff8103e009>] ? process_timeout+0xb/0xb
 [<ffffffff8109dba3>] kswapd+0x270/0x289
 [<ffffffff8104c5ea>] ? __init_waitqueue_head+0x46/0x46
 [<ffffffff8109d933>] ? balance_pgdat+0x595/0x595
 [<ffffffff8104bf7a>] kthread+0x7f/0x87
 [<ffffffff813ad6b4>] kernel_thread_helper+0x4/0x10
 [<ffffffff81026b98>] ? finish_task_switch+0x45/0xc0
 [<ffffffff813abcdd>] ? retint_restore_args+0xe/0xe
 [<ffffffff8104befb>] ? __init_kthread_worker+0x53/0x53
 [<ffffffff813ad6b0>] ? gs_change+0xb/0xb
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Update soc-camera documentation to reflect the current camera host API and
the use of the common V4L2 subdev API.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This adds OF support for davinci_wdt driver.
Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

IT8721 and IT8728 support Intel PECI temperature reporting. Each sensor
can be programmed to display the temperature reported on the PECI interface.

If configured for Intel PECI, the driver reported the wrong sensor type for
the respective thermal sensor. Fix the code to correctly report it as
"Intel PECI (6)".
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

add new macro V4L2_PIX_FMT_SGRBG10ALAW8 and associated formats
to represent Bayer format frames compressed by A-LAW algorithm,
add V4L2_PIX_FMT_UV8 to represent storage of CbCr data (UV interleaved)
only.
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Acked-by: NSakari Ailus <sakari.ailus@iki.fi>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Error: no ID for constraint linkend: V4L2-PIX-FMT-NV12MT-16X16.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

add new enum entries for supporting the media-bus formats on dm365.
These include some bayer and some non-bayer formats.
V4L2_MBUS_FMT_YDYUYDYV8_1X16 and V4L2_MBUS_FMT_UV8_1X8 are used
internal to the hardware by the resizer.
V4L2_MBUS_FMT_SBGGR10_ALAW8_1X8 represents the bayer ALAW format
that is supported by dm365 hardware.
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Acked-by: NSakari Ailus <sakari.ailus@iki.fi>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fix name of slink binding and address of sflash example to make it
self consistent.
Signed-off-by: NAllen Martin <amartin@nvidia.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

In order to use S32C1I instruction on cores with ATOMCTL SR the register
must be properly initialized.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NChris Zankel <chris@zankel.net>

Describe NUMA node sysfs files/attributes.

Note that for the specific dates and contacts I couldn't find,
I left it as default for Oct 2002 and linux-mm.
Signed-off-by: NDavidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NGlauber Costa <glommer@parallels.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NGlauber Costa <glommer@parallels.com>
Acked-by: NKamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>