- 24 1月, 2014 10 次提交
-
-
由 Manish chopra 提交于
o Added hardware ops for interrupt enable/disable functions Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Madhani 提交于
o Dump each Tx queue details with all descriptors, queue indices and Tx queue stats to imporve data colletion in situations where Tx timeout occurs. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sucheta Chakraborty 提交于
o Use boolean type instead of u8. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
After the option conversion downdelay and updelay divide a u64 and on a 32 bit this causes the following errors: ERROR: "__udivdi3" [drivers/net/bonding/bonding.ko] undefined! ERROR: "__umoddi3" [drivers/net/bonding/bonding.ko] undefined! Fix it by using a normal int instead because newval->value is capped at INT_MAX by the way the option is defined. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
As part of a workaround for a hardware erratum in the SFC9100 family (SF bug 35388), the TX_DESC_UPD_DWORD register address is also used for communicating with the event block, and only descriptor pointer values < 2048 are valid. If the TX DMA ring size is increased to 4096 descriptors (which the firmware still allows) then we may write a descriptor pointer value >= 2048, which has entirely different and undesirable effects! Limit the TX DMA ring size correctly when this workaround is in effect. Fixes: 8127d661 ('sfc: Add support for Solarflare SFC9100 family') Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NShradha Shah <sshah@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
Make sure the practice set by commit 0afb1666 "vxlan: Add capability of Rx checksum offload for inner packet" is applied when the skb goes through the portion of the RX code which is shared between vxlan netdevices and ovs vxlan port instances. Cc: Joseph Gasparakis <joseph.gasparakis@intel.com> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
In this situation then ARRAY_SIZE() and sizeof() are the same, but we're really dealing with array indexes and not byte offsets so ARRAY_SIZE() is cleaner. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NGrant Grundler <grundler@parisc-linux.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gavin Shan 提交于
We possibly retrieve the adapter's statistics during EEH recovery and that should be disallowed. Otherwise, it would possibly incur replicate EEH error and EEH recovery is going to fail eventually. The patch reuses statistics lock and checks net_device is attached before going to retrieve statistics, so that the problem can be avoided. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gavin Shan 提交于
If we have EEH error happens to the adapter and we have to remove it from the system for some reasons (e.g. more than 5 EEH errors detected from the device in last hour), the adapter will be disabled for towice separately by eeh_err_detected() and remove_one(), which will incur following unexpected backtrace. The patch tries to avoid it. WARNING: at drivers/pci/pci.c:1431 CPU: 12 PID: 121 Comm: eehd Not tainted 3.13.0-rc7+ #1 task: c0000001823a3780 ti: c00000018240c000 task.ti: c00000018240c000 NIP: c0000000003c1e40 LR: c0000000003c1e3c CTR: 0000000001764c5c REGS: c00000018240f470 TRAP: 0700 Not tainted (3.13.0-rc7+) MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI> CR: 28000024 XER: 00000004 CFAR: c000000000706528 SOFTE: 1 GPR00: c0000000003c1e3c c00000018240f6f0 c0000000010fe1f8 0000000000000035 GPR04: 0000000000000000 0000000000000000 00000000003ae509 0000000000000000 GPR08: 000000000000346f 0000000000000000 0000000000000000 0000000000003fef GPR12: 0000000028000022 c00000000ec93000 c0000000000c11b0 c000000184ac3e40 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR24: 0000000000000000 c0000000009398d8 c00000000101f9c0 c0000001860ae000 GPR28: c000000182ba0000 00000000000001f0 c0000001860ae6f8 c0000001860ae000 NIP [c0000000003c1e40] .pci_disable_device+0xd0/0xf0 LR [c0000000003c1e3c] .pci_disable_device+0xcc/0xf0 Call Trace: [c0000000003c1e3c] .pci_disable_device+0xcc/0xf0 (unreliable) [d0000000073881c4] .remove_one+0x174/0x320 [cxgb4] [c0000000003c57e0] .pci_device_remove+0x60/0x100 [c00000000046396c] .__device_release_driver+0x9c/0x120 [c000000000463a20] .device_release_driver+0x30/0x60 [c0000000003bcdb4] .pci_stop_bus_device+0x94/0xd0 [c0000000003bcf48] .pci_stop_and_remove_bus_device+0x18/0x30 [c00000000003f548] .pcibios_remove_pci_devices+0xa8/0x140 [c000000000035c00] .eeh_handle_normal_event+0xa0/0x3c0 [c000000000035f50] .eeh_handle_event+0x30/0x2b0 [c0000000000362c4] .eeh_event_handler+0xf4/0x1b0 [c0000000000c12b8] .kthread+0x108/0x130 [c00000000000a168] .ret_from_kernel_thread+0x5c/0x74 Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mugunthan V N 提交于
Enable promiscuous mode support for CPSW. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 1月, 2014 30 次提交
-
-
由 Weilong Chen 提交于
Like bonding, team as netdevice doesn't cross netns boundaries. Team ports and team itself live in same netns. Signed-off-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Weilong Chen 提交于
Like bridge, bonding as netdevice doesn't cross netns boundaries. Bonding ports and bonding itself live in same netns. Signed-off-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Signed-off-by: NJiri Pirko <jiri@resnulli.us> Acked-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Allow user to identify easily what the attributes are related to. Change the name of the group to "bonding_slave" to be similar to master which is named "bonding". Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dominic Curran 提交于
A patch for fixing a race between queue selection and changing queues was introduced in commit 92bb73ea("tuntap: fix a possible race between queue selection and changing queues"). The fix was to prevent the driver from re-reading the tun->numqueues more than once within tun_select_queue() using ACCESS_ONCE(). We have been experiancing 'Divide-by-zero' errors in tun_net_xmit() since we moved from 3.6 to 3.10, and believe that they come from a simular source where the value of tun->numqueues changes to zero between the first and a subsequent read of tun->numqueues. The fix is a simular use of ACCESS_ONCE(), as well as a multiply instead of a divide in the if statement. Signed-off-by: NDominic Curran <dominic.curran@citrix.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Maxim Krasnyansky <maxk@qti.qualcomm.com> Acked-by: NJason Wang <jasowang@redhat.com> Acked-by: NMax Krasnyansky <maxk@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
If the new primay is not matching any slave in the bond, the bond should record it to params, clean the primary slave and select a new active slave. Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
As per suggestion from Eric W. Biederman, vxlan should be using {un,}register_pernet_subsys() instead of {un,}register_pernet_device() to ensure the vxlan_net structure is initialized before and cleaned up after all network devices in a given network namespace i.e. when dealing with network notifiers. This is similarly handeled already in commit 91e2ff35 ("net: Teach vlans to cleanup as a pernet subsystem") and, thus, improves upon fd27e0d4 ("net: vxlan: do not use vxlan_net before checking event type"). Just as in 91e2ff35, we do not need to explicitly handle deletion of vxlan devices as network namespace exit calls dellink on all remaining virtual devices, and rtnl_link_unregister() calls dellink on all outstanding devices in that network namespace, so we can entirely drop the pernet exit operation as well. Moreover, on vxlan module exit, rcu_barrier() is called by netns since commit 3a765eda ("netns: Add an explicit rcu_barrier to unregister_pernet_{device|subsys}"), so this may be omitted. Tested with various scenarios and works well on my side. Suggested-by: NEric W. Biederman <ebiederm@xmission.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so slaves would use the new bonding option API. Also move the option to its own set function in bond_options.c and fix some style errors. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so lp_interval would use the new bonding option API. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so resend_igmp would use the new bonding option API. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so all_slaves_active would use the new bonding option API. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so queue_id would use the new bonding option API. Also move it to its own set function in bond_options.c and fix some style errors. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so active_slave would use the new bonding option API. Also some trivial/style fixes. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so use_carrier would use the new bonding option API. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so primary_reselect would use the new bonding option API. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so primary would use the new bonding option API. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so miimon would use the new bonding option API. The "default" definition has been removed as it was 0. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so num_peer_notif would use the new bonding option API. When the auto-sysfs generation is done an alias should be added for this option as there're currently 2 entries in sysfs for it. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so ad_select would use the new bonding option API. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so min_links would use the new bonding option API. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so lacp_rate would use the new bonding option API. Also some trivial/style error fixes. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so updelay would use the new bonding option API. Also some trivial style fixes. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so downdelay would use the new bonding option API. Also some trivial style fixes. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so arp_ip_target would use the new bonding option API. This option is an exception because of the way it's currently implemented that's why its netlink code is a bit different from the other options to keep the functionality as before and at the same time to have a single set function. This patch also fixes a few stylistic errors. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so arp_interval would use the new bonding option API. The "default" definition has been removed as it was 0. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so fail_over_mac would use the new bonding option API. Also fixes a trivial copy/paste error in bond_check_params where the wrong variable was used for the error msg. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so arp_all_targets would use the new bonding option API. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so arp_validate would use the new bonding option API. Also fix some trivial/style errors. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
This patch adds the necessary changes so xmit_hash_policy would use the new bonding option API. Also fix some trivial/style errors. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-