This code is not ready, but we need to rip it out instead of rebasing
as we would lose the APIC/IO_APIC unification otherwise.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This code is not ready yet.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Use APIC_DIVISOR being set to 16 for both 32/64bit
mode. To escape APIC timer underflow during calibration
set it to the maximum possible value.

Also typo error (CONFG instead of proper CONFIG) fixed.
The error was caught by Venkatesh Pallipadi, thanks a lot Venkatesh!

See details on http://lkml.org/lkml/2008/10/9/425Reported-by: NVenkatesh Pallipad <venkatesh.pallipadi@intel.com>
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Acked-by: N"Maciej W. Rozycki" <macro@linux-mips.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Create /sys/firmware/sgi_uv sysfs entries for partition_id and coherence_id.
Signed-off-by: NRuss Anderson <rja@sgi.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add a bios call to return partitioning related info.
Signed-off-by: NRuss Anderson <rja@sgi.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add the EFI callback function and associated wrapper code.
Initialize SAL system table entry info at boot time.
Signed-off-by: NRuss Anderson <rja@sgi.com>
Signed-off-by: NPaul Jackson <pj@sgi.com>
Acked-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Look for a UV entry in the EFI tables.
Signed-off-by: NRuss Anderson <rja@sgi.com>
Signed-off-by: NPaul Jackson <pj@sgi.com>
Acked-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

fix:

 arch/x86/kernel/uv_irq.c: In function 'uv_ack_apic':
 arch/x86/kernel/uv_irq.c:26: error: implicit declaration of function 'ack_APIC_irq'
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Provide a means for UV interrupt MMRs to be setup with the message to be sent
when an MSI is raised.
Signed-off-by: NDean Nelson <dcn@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Fix the below compile warnings due to recent HPET MSI changes

arch/x86/kernel/hpet.c:48: warning: 'hpet_devs' defined but not used
arch/x86/kernel/hpet.c:50: warning: 'per_cpu__cpu_hpet_dev' defined but not used
Reported-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

v2: fix hpet compiling error
v3: Bjorn want to use dev_printk instead
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Clean up obscure for() cycle with straight while() form
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Arjan van de Ven noticed that we changed IRQ numbers from decimal
to hex in /proc/interrupts - that can break user-space utilities
like irqbalanced.
Reported-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Fix problem caused by reordering of the calls to uv_cpu_init() &
uv_system_init. Originally, uv_cpu_init() was called AFTER uv_system_init.
This order was recently broken as a side-effect of other patches.

With this patch, initialization of cpu 0 is now done by the system_init
call.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Interrupt remapping could lead to NULL dereference in case of
kzalloc failed and memory leak in other way. So fix the
both cases.
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Yinghai Lu reported:

| >  0 add_pin_to_irq: irq 15 --> apic 0 pin 15
| > IOAPIC[0]: Set routing entry (8-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
| >  8-16 8-17 8-18 8-19 8-20 8-21 8-22 8-23 (apicid-pin) not connected
| >  9-0 9-1 9-2 9-3 9-4 9-5 9-6 9-7 9-8 9-9 9-10 9-11 9-12 9-13 9-14 9-15
| > 9-16 9-17 9-18 9-19 9-20 9-21 9-22 9-23 (apicid-pin) not connected
| >
|
| only first one not connected at first, and ...

here is a quick fix for this.
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

If we don't have CONFIG_X86_PM_TIMER=y compiler warns about
unused variables. Move PM timer based calibration into a
separate function and make the code cleaner and the compiler
happy as well.
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

On 82489DX we don't have ESR register so we should not
write it.
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

lapic_setup_esr doesn't handle esr_disable inquire.
The error brought in during unification process.
Fix it.
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Replace __DO_ACTION macro with io_apic_modify_irq function.
This allow us to 'grep' definitions being hided by
__DO_ACTION macro:

	__unmask_IO_APIC_irq
	__mask_IO_APIC_irq
	__mask_and_edge_IO_APIC_irq
	__unmask_and_level_IO_APIC_irq
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Acked-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Added dummy function for hpet_setup_msi_irq().
Signed-off-by: NSteven Noonan <steven@uplinklabs.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

On Sat, Sep 06, 2008 at 06:03:53AM -0700, Ingo Molnar wrote:
>
> it crashes two testsystems, the fault on a NULL pointer in hpet init,
> with:
>
> initcall print_all_ICs+0x0/0x520 returned 0 after 26 msecs
> calling  hpet_late_init+0x0/0x1c0
> BUG: unable to handle kernel NULL pointer dereference at 000000000000008c
> IP: [<ffffffff80d228be>] hpet_late_init+0xfe/0x1c0
> PGD 0
> Oops: 0000 [1] SMP
> CPU 0
> Modules linked in:
> Pid: 1, comm: swapper Not tainted 2.6.27-rc5 #29725
> RIP: 0010:[<ffffffff80d228be>]  [<ffffffff80d228be>] hpet_late_init+0xfe/0x1c0
> RSP: 0018:ffff88003fa07dd0  EFLAGS: 00010246
> RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
> RDX: ffffc20000000160 RSI: 0000000000000000 RDI: 0000000000000003
> RBP: ffff88003fa07e90 R08: 0000000000000000 R09: ffff88003fa07dd0
> R10: 0000000000000001 R11: 0000000000000000 R12: ffff88003fa07dd0
> R13: 0000000000000002 R14: ffffc20000000000 R15: 000000006f57e511
> FS:  0000000000000000(0000) GS:ffffffff80cf6a80(0000) knlGS:0000000000000000
> CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> CR2: 000000000000008c CR3: 0000000000201000 CR4: 00000000000006e0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process swapper (pid: 1, threadinfo ffff88003fa06000, task ffff88003fa08000)
> Stack:  00000000fed00000 ffffc20000000000 0000000100000003 0000000800000002
>  0000000000000000 0000000000000000 0000000000000000 0000000000000000
>  0000000000000000 0000000000000000 0000000000000000 0000000000000000
> Call Trace:
>  [<ffffffff80d227c0>] ? hpet_late_init+0x0/0x1c0
>  [<ffffffff80209045>] do_one_initcall+0x45/0x190
>  [<ffffffff80296f39>] ? register_irq_proc+0x19/0xe0
>  [<ffffffff80d0d140>] ? early_idt_handler+0x0/0x73
>  [<ffffffff80d0dabc>] kernel_init+0x14c/0x1b0
>  [<ffffffff80942ac1>] ? trace_hardirqs_on_thunk+0x3a/0x3f
>  [<ffffffff8020dbd9>] child_rip+0xa/0x11
>  [<ffffffff8020ceee>] ? restore_args+0x0/0x30
>  [<ffffffff80d0d970>] ? kernel_init+0x0/0x1b0
>  [<ffffffff8020dbcf>] ? child_rip+0x0/0x11
> Code: 20 48 83 c1 01 48 39 f1 75 e3 44 89 e8 4c 8b 05 29 29 22 00 31 f6 48 8d 78 01 66 66 90 89 f0 48 8d 04 80 48 c1 e0 05 4a 8d 0c 00 <f6> 81 8c 00 00 00 08 74 26 8b 81 80 00 00 00 8b 91 88 00 00 00
> RIP  [<ffffffff80d228be>] hpet_late_init+0xfe/0x1c0
>  RSP <ffff88003fa07dd0>
> CR2: 000000000000008c
> Kernel panic - not syncing: Fatal exception

There was one code path, with CONFIG_PCI_MSI disabled, where we were accessing
hpet_devs without initialization. That resulted in the above crash. The change
below adds a check for hpet_devs.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Do not use KERN_DEBUG several times on the same line being printed.
Introduced by mine previous patch, sorry.
Reported-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

By changing printout form we are able to shrink (and clean up) code a bit.

Former printout example:

	init IO_APIC IRQs
	 IO-APIC (apicid-pin) 1-1, 1-2, 1-3 not connected.
	 IO-APIC (apicid-pin) 2-1, 2-2, 2-3 not connected.

New printout example:

	init IO_APIC IRQs
	 1-1 1-2 1-3 (apicid-pin) not connected
	 2-1 2-2 2-3 (apicid-pin) not connected
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Initialize a per CPU HPET MSI timer when possible. We retain the HPET
timer 0 (IRQ 0) and timer 1 (IRQ 8) as is when legacy mode is being used. We
setup the remaining HPET timers as per CPU MSI based timers. This per CPU
timer will eliminate the need for timer broadcasting with IRQ 0 when there
is non-functional LAPIC timer across CPU deep C-states.

If there are more CPUs than number of available timers, CPUs that do not
find any timer to use will continue using LAPIC and IRQ 0 broadcast.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

small style cleanups.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Basic HPET MSI setup code. Routines to perform basic MSI read write
in HPET memory map and setting up irq_chip for HPET MSI.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Preparatory patch before the actual HPET MSI changes. Sets up hpet_set_mode
and hpet_next_event for the MSI related changes. Just the code
refactoring and should be zero functional change.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We use irq_cfg_lock lock in SPARSE_IRQ only context so
move it under #ifdef and compiler will be happy.
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Make the code width a bit shorter with ARRAY_SIZE macro.
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

APIC_ARBPRI is a reserved register for XAPIC and beyond.
APIC_RRR is a reserved register except for 82489DX, APIC for Pentium processors.
APIC_EOI is a write only register.
APIC_DFR is reserved in x2apic mode.

Access to these registers in x2apic will result in #GP fault. Fix these
apic register accesses.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

According to entry_64.S we do pass pt_regs pointer
into interrupt handlers but don't use them. So we
safely may merge the declarations.
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Use the 32-bit APIC calibration code - it's more mature.
Signed-of-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>