- 05 5月, 2016 5 次提交
-
-
由 Flora Cui 提交于
Adjust to preferred code names. Signed-off-by: NFlora Cui <Flora.Cui@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Flora Cui 提交于
V2: seperate baffin & ellesmere settings instead of using fiji ones. Signed-off-by: NFlora Cui <Flora.Cui@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
They care common for all sdma 3.0 parts Acked-by: NTom St Denis <tom.stdenis@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
We were already enabling these CG features, this uses the standard interface for doing so. Acked-by: NTom St Denis <tom.stdenis@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Those are way too large. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 03 5月, 2016 1 次提交
-
-
由 Monk Liu 提交于
More ground work for conditional execution on SDMA necessary for preemption. Signed-off-by: NMonk Liu <monk.liu@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 17 3月, 2016 2 次提交
-
-
由 Monk Liu 提交于
Signed-off-by: NMonk Liu <Monk.Liu@amd.com> Reviewed-by: NChunming Zhou <david1.zhou@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Monk Liu 提交于
thus amdgpu_ib_free() can hook sched fence to SA manager in later patches. BTW: for amdgpu_free_job(), it should only fence_put() the fence of the last ib once, so fix it as well in this patch. Signed-off-by: NMonk Liu <Monk.Liu@amd.com> Reviewed-by: NChunming Zhou <david1.zhou@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 10 3月, 2016 1 次提交
-
-
由 Christian König 提交于
Code it similar to how we did it for the gfx and compute engines. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 09 3月, 2016 3 次提交
-
-
由 Christian König 提交于
Not used any more since we now always use the sheduler. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
-
由 Chunming Zhou 提交于
Signed-off-by: NChunming Zhou <David1.Zhou@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Chunming Zhou 提交于
Signed-off-by: NChunming Zhou <David1.Zhou@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 01 3月, 2016 1 次提交
-
-
由 Christian König 提交于
The owner must be per ring as long as we don't support sharing VMIDs per process. Also move the assigned VMID and page directory address into the IB structure. v3: assign the VMID to all IBs, not just the first one. v4: use correct pointer for owner Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NChunming Zhou <david1.zhou@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 13 2月, 2016 3 次提交
-
-
由 Alex Deucher 提交于
Split sdma and gfx programming. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Distribute the load on both rings. v2: use a loop for the initialization v3: agd: rebase on upstream Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Not used for anything. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 11 2月, 2016 8 次提交
-
-
由 Christian König 提交于
No need to keep that for every IB. Signed-off-by: NChristian König <christian.koenig@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
There is no point in sending them through the scheduler. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
We can't submit to multiple rings at the same time anyway. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
The padding depends on the firmware version and we need that for BO moves as well, not only for VM updates. v2: new approach of making pad_ib a ring function v3: fix typo in macro name Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
No need to duplicate that code over and over again. Also stop using the flags to determine if we need to map the addresses. v2: constify the pages_addr v3: rebased, fix typo in commit message Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
It's not needed any more because all access goes through the scheduler now. v2: Update commit message. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NChunming Zhou <david1.zhou@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
No longer needed since semaphores were removed. Reviewed-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NChunming Zhou <David1.Zhou@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Chunming Zhou 提交于
No longer used. Signed-off-by: NChunming Zhou <David1.Zhou@amd.com> Reviewed-by: NKen Wang <Qingqing.Wang@amd.com> Reviewed-by: NMonk Liu <monk.liu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 22 12月, 2015 3 次提交
-
-
由 Eric Huang 提交于
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com> Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
-
由 Jammy Zhou 提交于
The amdgu_powerplay variable is global for multiple GPU instances. v2: fold in Flora's module option change, protect adev reference in macros Signed-off-by: NJammy Zhou <Jammy.Zhou@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com>
-
由 Rex Zhu 提交于
Powerplay will use a different interface once it's integrated. These legacy pathes will be removed once powerplay is enabled by default. Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Signed-off-by: NJammy Zhou <Jammy.Zhou@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 22 10月, 2015 1 次提交
-
-
由 Samuel Li 提交于
Stoney is SDMA 3.x. v2: update to latest golden register settings Signed-off-by: NSamuel Li <samuel.li@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 21 10月, 2015 1 次提交
-
-
由 Christian König 提交于
It didn't worked to well anyway. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NChunming Zhou <david1.zhou@amd.com> Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
-
- 15 10月, 2015 1 次提交
-
-
由 Alex Deucher 提交于
Rework the sdma structures in the driver to consolidate all of the sdma info into a single structure and allow for asics that may have different numbers of sdma instances. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 03 9月, 2015 3 次提交
-
-
由 Jammy Zhou 提交于
Customize the insert_nop func for SDMA rings, and use burst NOP for ring/IB submissions in other places as well Signed-off-by: NJammy Zhou <Jammy.Zhou@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jammy Zhou 提交于
The insert_nop function is added to amdgpu_ring_funcs structure as well as the default implementation Signed-off-by: NJammy Zhou <Jammy.Zhou@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jammy Zhou 提交于
The burst NOP is supported for SDMA when feature_version is >= 20. Signed-off-by: NJammy Zhou <Jammy.Zhou@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 29 8月, 2015 1 次提交
-
-
由 Chunming Zhou 提交于
Signed-off-by: NChunming Zhou <david1.zhou@amd.com> Reviewed-by: NChristian K?nig <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 27 8月, 2015 1 次提交
-
-
由 Chunming Zhou 提交于
This aids handling buffers moves with the scheduler. Signed-off-by: NChunming Zhou <david1.zhou@amd.com> Reviewed-by: NChristian K?nig <christian.koenig@amd.com>
-
- 21 8月, 2015 1 次提交
-
-
由 Christian König 提交于
The problem now is that we don't necessarily call amdgpu_ib_get() in some error paths and so work with uninitialized data. Better require that the memory is already zeroed. v2: better commit message Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> (v1) Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 18 8月, 2015 4 次提交
-
-
由 Chunming Zhou 提交于
fix fence is released when pass to **fence sometimes. add reference for it. Signed-off-by: NChunming Zhou <david1.zhou@amd.com> Reviewed-by: NChristian K?nig <christian.koenig@amd.com>
-
由 Chunming Zhou 提交于
every sbumission should be able to get a fence. Signed-off-by: NChunming Zhou <david1.zhou@amd.com> Reviewed-by: NChristian K?nig <christian.koenig@amd.com> Reviewed-by: NJammy Zhou <jammy.zhou@amd.com>
-
由 Chunming Zhou 提交于
Signed-off-by: NChunming Zhou <david1.zhou@amd.com> Reviewed-by: NChristian K?nig <christian.koenig@amd.com> Reviewed-by: NJammy Zhou <jammy.zhou@amd.com>
-
由 Chunming Zhou 提交于
Signed-off-by: NChunming Zhou <david1.zhou@amd.com> Reviewed-by: NChristian K?nig <christian.koenig@amd.com>
-