- 26 10月, 2015 7 次提交
-
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
ASoC: Updates for v4.4 A first batch of updates targetted at v4.4. There are no substantial core fixes here, the biggest block of changes is updates to the rcar drivers and the addition of a CODEC driver for the AK4613. # gpg: Signature made Fri 25 Sep 2015 05:37:06 KST using RSA key ID 5D5487D0 # gpg: key CD7BEEBC: no public key for trusted key - skipped # gpg: key CD7BEEBC marked as ultimately trusted # gpg: key AF88CD16: no public key for trusted key - skipped # gpg: key AF88CD16 marked as ultimately trusted # gpg: key 16005C11: no public key for trusted key - skipped # gpg: key 16005C11 marked as ultimately trusted # gpg: key 5621E907: no public key for trusted key - skipped # gpg: key 5621E907 marked as ultimately trusted # gpg: key 5C6153AD: no public key for trusted key - skipped # gpg: key 5C6153AD marked as ultimately trusted # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
-
由 Axel Lin 提交于
So we have consistent order for register bit defines. Signed-off-by: NAxel Lin <axel.lin@ingics.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 25 10月, 2015 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 24 10月, 2015 14 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here are three xhci driver fixes for reported issues for 4.3-rc7 All have been in linux-next for a while with no problems" * tag 'usb-4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: xhci: Add spurious wakeup quirk for LynxPoint-LP controllers xhci: handle no ping response error properly xhci: don't finish a TD if we get a short transfer event mid TD
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty/serial fixes from Greg KH: "Here are two fixes that resolve reported issues, one with the 8250 driver, and the other with the generic fbcon driver. Both have been in linux-next for a while" * tag 'tty-4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: fbcon: initialize blink interval before calling fb_set_par Revert "serial: 8250_dma: don't bother DMA with small transfers"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging driver fixes from Greg KH: "Here are four iio driver fixes for 4.3-rc7, fixing some reported issues. All of these have been in linux-next for a while" * tag 'staging-4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: mxs-lradc: Fix temperature offset iio: accel: sca3000: memory corruption in sca3000_read_first_n_hw_rb() iio: st_accel: fix interrupt handling on LIS3LV02 iio: adc: twl4030: Fix ADC[3:6] readings
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma由 Linus Torvalds 提交于
Pull infiniband fixes from Doug Ledford: "It's late in the game, I know, but these fixes seemed important enough to warrant a late pull request. They all involve oopses or use after frees or corruptions. Six serious fixes: - Hold the mutex around the find and corresponding update of our gid - The ifa list is rcu protected, copy its contents under rcu to avoid using a freed structure - On error, netdev might be null, so check it before trying to release it - On init, if workqueue alloc fails, fail init - The new demux patches exposed a bug in mlx5 and ipath drivers, we need to use the payload P_Key to determine the P_Key the packet arrived on because the hardware doesn't tell us the truth - Due to a couple convoluted error flows, it is possible for the CM to trigger a use_after_free and a double_free of rb nodes. Add two checks to prevent that. This code has worked for 10+ years. It is likely that some of the recent changes have caused this issue to surface. The current patch will protect us from nasty events for now while we track down why this is just now showing up" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/cm: Fix rb-tree duplicate free and use-after-free IB/cma: Use inner P_Key to determine netdev IB/ucma: check workqueue allocation before usage IB/cma: Potential NULL dereference in cma_id_from_event IB/core: Fix use after free of ifa IB/core: Fix memory corruption in ib_cache_gid_set_default_gid
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm由 Linus Torvalds 提交于
Pull device mapper fixes from Mike Snitzer: "Three stable fixes (two in btree code used by DM thinp and one to properly store flags in DM cache metadata's superblock)" * tag 'dm-4.3-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache: the CLEAN_SHUTDOWN flag was not being set dm btree: fix leak of bufio-backed block in btree_split_beneath error path dm btree remove: fix a bug when rebalancing nodes after removal
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block layer fixes from Jens Axboe: "A final set of fixes for 4.3. It is (again) bigger than I would have liked, but it's all been through the testing mill and has been carefully reviewed by multiple parties. Each fix is either a regression fix for this cycle, or is marked stable. You can scold me at KS. The pull request contains: - Three simple fixes for NVMe, fixing regressions since 4.3. From Arnd, Christoph, and Keith. - A single xen-blkfront fix from Cathy, fixing a NULL dereference if an error is returned through the staste change callback. - Fixup for some bad/sloppy code in nbd that got introduced earlier in this cycle. From Markus Pargmann. - A blk-mq tagset use-after-free fix from Junichi. - A backing device lifetime fix from Tejun, fixing a crash. - And finally, a set of regression/stable fixes for cgroup writeback from Tejun" * 'for-linus' of git://git.kernel.dk/linux-block: writeback: remove broken rbtree_postorder_for_each_entry_safe() usage in cgwb_bdi_destroy() NVMe: Fix memory leak on retried commands block: don't release bdi while request_queue has live references nvme: use an integer value to Linux errno values blk-mq: fix use-after-free in blk_mq_free_tag_set() nvme: fix 32-bit build warning writeback: fix incorrect calculation of available memory for memcg domains writeback: memcg dirty_throttle_control should be initialized with wb->memcg_completions writeback: bdi_writeback iteration must not skip dying ones writeback: fix bdi_writeback iteration in wakeup_dirtytime_writeback() writeback: laptop_mode_timer_fn() needs rcu_read_lock() around bdi_writeback iteration nbd: Add locking for tasks xen-blkfront: check for null drvdata in blkback_changed (XenbusStateClosing)
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client由 Linus Torvalds 提交于
Pull Ceph fixes from Sage Weil: "Two fixes. One is a stopgap to prevent a stack blowout when users have a deep chain of image clones. (We'll rewrite this code to be non-recursive for the next window, but in the meantime this is a simple fix that avoids a crash.) The second fixes a refcount underflow" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: prevent kernel stack blow up on rbd map rbd: don't leak parent_spec in rbd_dev_probe_parent()
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason: "I have two more small fixes this week: Qu's fix avoids unneeded COW during fallocate, and Christian found a memory leak in the error handling of an earlier fix" * 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: fix possible leak in btrfs_ioctl_balance() btrfs: Avoid truncate tailing page if fallocate range doesn't exceed inode size
-
由 Joe Thornber 提交于
If the CLEAN_SHUTDOWN flag is not set when a cache is loaded then all cache blocks are marked as dirty and a full writeback occurs. __commit_transaction() is responsible for setting/clearing CLEAN_SHUTDOWN (based the flags_mutator that is passed in). Fix this issue, of the cache's on-disk flags being wrong, by making sure __commit_transaction() does not reset the flags after the mutator has altered the flags in preparation for them being serialized to disk. before: sb_flags = mutator(le32_to_cpu(disk_super->flags)); disk_super->flags = cpu_to_le32(sb_flags); disk_super->flags = cpu_to_le32(cmd->flags); after: disk_super->flags = cpu_to_le32(cmd->flags); sb_flags = mutator(le32_to_cpu(disk_super->flags)); disk_super->flags = cpu_to_le32(sb_flags); Reported-by: NBogdan Vasiliev <bogdan.vasiliev@gmail.com> Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
-
由 Mike Snitzer 提交于
btree_split_beneath()'s error path had an outstanding FIXME that speaks directly to the potential for _not_ cleaning up a previously allocated bufio-backed block. Fix this by releasing the previously allocated bufio block using unlock_block(). Reported-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com> Acked-by: NJoe Thornber <thornber@redhat.com> Cc: stable@vger.kernel.org
-
由 Joe Thornber 提交于
Commit 4c7e3093 ("dm btree remove: fix bug in redistribute3") wasn't a complete fix for redistribute3(). The redistribute3 function takes 3 btree nodes and shares out the entries evenly between them. If the three nodes in total contained (MAX_ENTRIES * 3) - 1 entries between them then this was erroneously getting rebalanced as (MAX_ENTRIES - 1) on the left and right, and (MAX_ENTRIES + 1) in the center. Fix this issue by being more careful about calculating the target number of entries for the left and right nodes. Unit tested in userspace using this program: https://github.com/jthornber/redistribute3-test/blob/master/redistribute3_t.cSigned-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
-
由 Oder Chiou 提交于
The patch adds the HWEQ function for the speaker output. User can set the HWEQ parameters using the ALSA binary control byte-by-byte. We use the following struct array to store the HWEQ parameters for implementing as simple as possible. struct rt5645_eq_param_s { unsigned short reg; unsigned short val; }; It supports the variant length of the HWEQ parameters that are required. We add the validating function in the function "rt5645_hweq_put" of the ALSA binary control to avoid the user that puts the invalid parameters. In the HWEQ enable function of speaker event, we also add the validating function to prevent that the invalid parameters are applied to codec. The HWEQ parameters should be controlled by DAPM for a specific sequence, so the parameters will be applied to the codec in the speaker power up event of DAPM, and will be disabled in the speaker power down event of DAPM. Signed-off-by: NOder Chiou <oder_chiou@realtek.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Ilya Dryomov 提交于
Mapping an image with a long parent chain (e.g. image foo, whose parent is bar, whose parent is baz, etc) currently leads to a kernel stack overflow, due to the following recursion in the reply path: rbd_osd_req_callback() rbd_obj_request_complete() rbd_img_obj_callback() rbd_img_parent_read_callback() rbd_obj_request_complete() ... Limit the parent chain to 16 images, which is ~5K worth of stack. When the above recursion is eliminated, this limit can be lifted. Fixes: http://tracker.ceph.com/issues/12538 Cc: stable@vger.kernel.org # 3.10+, needs backporting for < 4.2 Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Reviewed-by: NJosh Durgin <jdurgin@redhat.com>
-
由 Ilya Dryomov 提交于
Currently we leak parent_spec and trigger a "parent reference underflow" warning if rbd_dev_create() in rbd_dev_probe_parent() fails. The problem is we take the !parent out_err branch and that only drops refcounts; parent_spec that would've been freed had we called rbd_dev_unparent() remains and triggers rbd_warn() in rbd_dev_parent_put() - at that point we have parent_spec != NULL and parent_ref == 0, so counter ends up being -1 after the decrement. Redo rbd_dev_probe_parent() to fix this. Cc: stable@vger.kernel.org # 3.10+, needs backporting for < 4.2 Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Reviewed-by: NAlex Elder <elder@linaro.org>
-
- 23 10月, 2015 18 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar: "Misc fixes: two KASAN fixes, two EFI boot fixes, two boot-delay optimization fixes, and a fix for a IRQ handling hang observed on virtual platforms" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm, kasan: Silence KASAN warnings in get_wchan() compiler, atomics, kasan: Provide READ_ONCE_NOCHECK() x86, kasan: Fix build failure on KASAN=y && KMEMCHECK=y kernels x86/smpboot: Fix CPU #1 boot timeout x86/smpboot: Fix cpu_init_udelay=10000 corner case boot parameter misbehavior x86/ioapic: Disable interrupts when re-routing legacy IRQs x86/setup: Extend low identity map to cover whole kernel range x86/efi: Fix multiple GOP device support
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fixes from Ingo Molnar: "Misc fixes all around the map: an instrumentation fix, a nohz usability fix, a lockdep annotation fix and two task group scheduling fixes" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Add missing lockdep_unpin() annotations sched/deadline: Fix migration of SCHED_DEADLINE tasks nohz: Revert "nohz: Set isolcpus when nohz_full is set" sched/fair: Update task group's load_avg after task migration sched/fair: Fix overly small weight for interactive group entities sched, tracing: Stop/start critical timings around the idle=poll idle loop
-
由 Linus Torvalds 提交于
Merge fixes from Andrew Morton: "9 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: ocfs2/dlm: unlock lockres spinlock before dlm_lockres_put fault-inject: fix inverted interval/probability values in printk lib/Kconfig.debug: disable -Wframe-larger-than warnings with KASAN=y mm: make sendfile(2) killable thp: use is_zero_pfn() only after pte_present() check mailmap: update Javier Martinez Canillas' email MAINTAINERS: add Sergey as zsmalloc reviewer mm: cma: fix incorrect type conversion for size during dma allocation kmod: don't run async usermode helper as a child of kworker thread
-
由 Peter Zijlstra 提交于
Luca and Wanpeng reported two missing annotations that led to false lockdep complaints. Add the missing annotations. Reported-by: NLuca Abeni <luca.abeni@unitn.it> Reported-by: NWanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Juri Lelli <juri.lelli@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: cbce1a68 ("sched,lockdep: Employ lock pinning") Link: http://lkml.kernel.org/r/20151023095008.GY17308@twins.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc fixes from Michael Ellerman: - Revert "Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8" from Paul - Handle irq_happened flag correctly in off-line loop from Paul - Validate rtas.entry before calling enter_rtas() from Vasant * tag 'powerpc-4.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/rtas: Validate rtas.entry before calling enter_rtas() powerpc/powernv: Handle irq_happened flag correctly in off-line loop powerpc: Revert "Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8"
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Arnd Bergmann: "Most of the changes this time are for incorrect device nodes in various ways, on on imx, berlin, exynos, ux500, uniphier, omap and meson. Chen-Yu Tsai now co-maintains mach-sunxi (Allwinner). Other bug fixes include - a partial revert of a broken tegra gpio patch - irq affinity for arm ccn - suspend on one Armada 385 machine - enable ZONE_DMA to avoid an OMAP crash for over 2GB RAM - turning on a regulator on beagleboard-x15 for HDMI - making the omap gpmc debug code visible - setup of orion network switch - a rare build regression for pxa" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits) ARM: OMAP2+: Fix imprecise external abort caused by bogus SRAM init thermal: exynos: Fix register read in TMU ARM: OMAP2+: Fix oops with LPAE and more than 2GB of memory ARM: tegra: Comment out gpio-ranges properties ARM: dts: uniphier: fix IRQ number for devices on PH1-LD6b ref board drivers/perf: arm_pmu: avoid CPU device_node reference leak bus: arm-ccn: Fix irq affinity setting on CPU migration bus: arm-ccn: Handle correctly no-more-cpus case ARM: mvebu: correct a385-db-ap compatible string ARM: meson6: DTS: Fix wrong reg mapping and IRQ numbers MAINTAINERS: Update Allwinner entry and add new maintainer ARM: ux500: modify initial levelshifter status ARM: pxa: fix pxa3xx DFI lockup hack Documentation: ARM: List new omap MMC requirements memory: omap-gpmc: dump "before" state before first modification memory: omap-gpmc: Fix unselectable debug option for GPMC ARM: dts: am57xx-beagle-x15: set VDD_SD to always-on ARM: dts: Fix audio card detection on Peach boards ARM: EXYNOS: Fix double of_node_put() when parsing child power domains ARM: orion: Fix DSA platform device after mvmdio conversion ...
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM bugfixes from Paolo Bonzini: "Bug fixes for ARM, mostly 4.3 regressions related to virtual interrupt controller changes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: arm/arm64: KVM: Fix disabled distributor operation arm/arm64: KVM: Clear map->active on pend/active clear arm/arm64: KVM: Fix arch timer behavior for disabled interrupts KVM: arm: use GIC support unconditionally KVM: arm/arm64: Fix memory leak if timer initialization fails KVM: arm/arm64: Do not inject spurious interrupts
-
由 Linus Torvalds 提交于
Merge tag 'trace-fixes-v4.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Running tests on other changes, the system locked up due to lots of warnings. It was caused by the stack tracer triggering a warning about using rcu_dereference() when RCU was not watching. This can happen due to the fact that the stack tracer uses the function tracer to check each function, and there are functions that may be called and traced when RCU stopped watching. Namely when a function is called just before going idle or to userspace and after RCU stopped watching that current CPU. The first patch makes sure that RCU is watching when the stack tracer uses RCU. The second patch is to make sure that the stack tracer does not get called by functions in NMI, as it's not NMI safe" * tag 'trace-fixes-v4.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Do not allow stack_tracer to record stack in NMI tracing: Have stack tracer force RCU to be watching
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "There is nothing to worry you much, only a few small & stable patches are found for usual stuff, HD-audio (a Lenovo laptop quirk, a fix for minor error handling) and ASoC (trivial fixes for RT298 and WM codecs). The only remaining major change is the fix for ASoC SX_TLV control that was overseen during refactoring, but the fix itself is trivial and safe" * tag 'sound-4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: wm8962: mark cache_dirty flag after software reset in pm_resume ASoC: rt298: fix wrong setting of gpio2_en ASoC: wm8904: Correct number of EQ registers ALSA: hda - Fix deadlock at error in building PCM ASoC: Add info callback for SX_TLV controls ASoC: rt298: correct index default value ALSA: hda - Fix inverted internal mic on Lenovo G50-80 ALSA: hdac: Explicitly add io.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull media fixes from Mauro Carvalho Chehab: "Some regression fixes and potential security issues: - netup_unidvb: fix potential crash when spi is NULL - rtl28xxu: fix control message flaws - m88ds3103: fix a regression on Kernel 4.2 - c8sectpfe: fix some issues on this new driver - v4l2-flash-led-class: fix a Kbuild dependency - si2157 and si2158: check for array boundary when uploading firmware files - horus3a and lnbh25: fix some building troubles when some options aren't selected - ir-hix5hd2: drop the use of IRQF_NO_SUSPEND" * tag 'media/v4.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] m88ds3103: use own reg update_bits() implementation [media] rtl28xxu: fix control message flaws [media] v4l2-flash-led-class: Add missing VIDEO_V4L2 Kconfig dependency [media] netup_unidvb: fix potential crash when spi is NULL [media] si2168: Bounds check firmware [media] si2157: Bounds check firmware [media] ir-hix5hd2: drop the use of IRQF_NO_SUSPEND [media] c8sectpfe: fix return of garbage [media] c8sectpfe: fix ininitialized error return on firmware load failure [media] lnbh25: Fix lnbh25_attach() function return type [media] horus3a: Fix horus3a_attach() function parameters
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "I've been a bit slow gathering these: - drm/mst: one mutex leak in a fail path - radeon: two oops fixes, one dpm fix - i915: one messy set of fixes, where we revert the original fix, and pull back the proper set of fixes from -next on top. - nouveau: one fix for an illegal buffer placement. Doesn't look too bad, hopefully shouldn't be too much more" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau/gem: return only valid domain when there's only one drm: fix mutex leak in drm_dp_get_mst_branch_device drm/amdgpu: add missing dpm check for KV dpm late init drm/amdgpu/dpm: don't add pwm attributes if DPM is disabled drm/radeon/dpm: don't add pwm attributes if DPM is disabled drm/i915: Add primary plane to mask if it's visible drm/i915: Move sprite/cursor plane disable to intel_sanitize_crtc() drm/i915: Assign hwmode after encoder state readout Revert "drm/i915: Add primary plane to mask if it's visible" drm/i915: Deny wrapping an userptr into a framebuffer drm/i915: Enable DPLL VGA mode before P1/P2 divider write drm/i915: Restore lost DPLL register write on gen2-4 drm/i915: Flush pipecontrol post-sync writes drm/i915: Fix kerneldoc for i915_gem_shrink_all
-
由 Joseph Qi 提交于
dlm_lockres_put will call dlm_lockres_release if it is the last reference, and then it may call dlm_print_one_lock_resource and take lockres spinlock. So unlock lockres spinlock before dlm_lockres_put to avoid deadlock. Signed-off-by: NJoseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Florian Westphal 提交于
interval displays the probability and vice versa. Fixes: 6adc4a22 ("fault-inject: add ratelimit option") Acked-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrey Ryabinin 提交于
When the kernel compiled with KASAN=y, GCC adds redzones for each variable on stack. This enlarges function's stack frame and causes: 'warning: the frame size of X bytes is larger than Y bytes' The worst case I've seen for now is following: ../net/wireless/nl80211.c: In function `nl80211_send_wiphy': ../net/wireless/nl80211.c:1731:1: warning: the frame size of 5448 bytes is larger than 2048 bytes [-Wframe-larger-than=] That kind of warning becomes useless with KASAN=y. It doesn't necessarily indicate that there is some problem in the code, thus we should turn it off. (The KASAN=y stack size in increased from 16k to 32k for this reason) Signed-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: NFengguang Wu <fengguang.wu@intel.com> Acked-by: NAbylay Ospan <aospan@netup.ru> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Kozlov Sergey <serjk@netup.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Kara 提交于
Currently a simple program below issues a sendfile(2) system call which takes about 62 days to complete in my test KVM instance. int fd; off_t off = 0; fd = open("file", O_RDWR | O_TRUNC | O_SYNC | O_CREAT, 0644); ftruncate(fd, 2); lseek(fd, 0, SEEK_END); sendfile(fd, fd, &off, 0xfffffff); Now you should not ask kernel to do a stupid stuff like copying 256MB in 2-byte chunks and call fsync(2) after each chunk but if you do, sysadmin should have a way to stop you. We actually do have a check for fatal_signal_pending() in generic_perform_write() which triggers in this path however because we always succeed in writing something before the check is done, we return value > 0 from generic_perform_write() and thus the information about signal gets lost. Fix the problem by doing the signal check before writing anything. That way generic_perform_write() returns -EINTR, the error gets propagated up and the sendfile loop terminates early. Signed-off-by: NJan Kara <jack@suse.com> Reported-by: NDmitry Vyukov <dvyukov@google.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Minchan Kim 提交于
Use is_zero_pfn() on pteval only after pte_present() check on pteval (It might be better idea to introduce is_zero_pte() which checks pte_present() first). Otherwise when working on a swap or migration entry and if pte_pfn's result is equal to zero_pfn by chance, we lose user's data in __collapse_huge_page_copy(). So if you're unlucky, the application segfaults and finally you could see below message on exit: BUG: Bad rss-counter state mm:ffff88007f099300 idx:2 val:3 Fixes: ca0984ca ("mm: incorporate zero pages into transparent huge pages") Signed-off-by: NMinchan Kim <minchan@kernel.org> Reviewed-by: NAndrea Arcangeli <aarcange@redhat.com> Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Acked-by: NVlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [4.1+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Javier Martinez Canillas 提交于
The get_maintainer script still reports my old Collabora email based on old commits but that address no longer exist so update mailmap to report my current email and avoid people sending to the old address. Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sergey Senozhatsky 提交于
Nominate myself as a zsmalloc reviewer. Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-