main.h is included in every file and is the only way to access types.h.
This makes forward declarations for all types defined in types.h
unnecessary.
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

The updated kernel doc & additional comment shall prevent accidental
copy & paste errors or calling the function without the required
precautions.
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

The Linux CodingStyle disallows multiple assignments in a single line.
(see chapter 1)
Reported-by: NMarkus Pargmann <mpa@pengutronix.de>
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

Kerneldoc required single line documentation in the past (before 2009).
Therefore, the 80 columns limit per line check of checkpatch was disabled
for kerneldoc. But kerneldoc is not excluded anymore from it and checkpatch
now enabled the check again.
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

(s|u)(8|16|32|64) are the preferred types in the kernel. The use of the
standard C99 types u?int(8|16|32|64)_t are objected by some people and even
checkpatch now warns about using them.
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

Taku Izumi says:

====================
FUJITSU Extended Socket network device driver

This patchsets adds FUJITSU Extended Socket network device driver.
Extended Socket network device is a shared memory based high-speed
network interface between Extended Partitions of PRIMEQUEST 2000 E2
series.

You can get some information about Extended Partition and Extended
Socket by referring the following manual.

http://globalsp.ts.fujitsu.com/dmsp/Publications/public/CA92344-0537.pdf
    3.2.1 Extended Partitioning
    3.2.2 Extended Socke

v2.2 -> v3:
   - Fix up according to David's comment (No functional change)
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds implementation for ethtool support.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds implementation of handling IRQ
of other receiver's receive cancellation request.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds epstop_task.
This task is used to process other receiver's
cancellation request.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds update_zone_task.
Zoning information can be changed by user.
This task is used to monitor if zoning information is
changed or not.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds unshare_watch_task.
Shared buffer's status can be changed into unshared.
This task is used to monitor shared buffer's status.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds force_close_task.
This task is used to close network device forcibly.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds interrupt_watch_task.
This task is used to prevent delay of interrupts.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds net_device_ops.ndo_vlan_rx_add_vid and
net_device_ops.ndo_vlan_rx_kill_vid callback.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds net_device_ops.ndo_tx_timeout callback.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds net_device_ops.ndo_change_mtu.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds net_device_ops.ndo_get_stats64 callback.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds NAPI polling function and receive related work.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds tx_stall_task.
When receiver's buffer is full, sender stops
its tx queue. This task is used to monitor
receiver's status and when receiver's buffer
is avairable, it resumes tx queue.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch add raise_intr_rxdata_task.
Extended Socket Network Device is shared memory
based, so someone's transmission denotes other's
reception. In order to notify receivers, sender
has to raise interruption of receivers.
raise_intr_rxdata_task does this work.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds net_device_ops.ndo_start_xmit callback,
which is called when sending packets.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds net_device_ops.ndo_open and .ndo_stop
callback. These function is called when network device
activation and deactivation.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds buffer address regist/unregistration routine.

This function is mainly invoked when network device's
activation (open) and deactivation (close)
in order to retist/unregist shared buffer address.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds ES information acquisition routine.
ES information can be retrieved issuing information
request command. ES information includes which
receiver is same zone.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch implements platform_driver's .probe and .remove
routine, and also adds board specific private data structure.

This driver registers net_device at platform_driver's .probe
routine and unregisters net_device at its .remove routine.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds hardware cleanup routine to be
invoked at driver's .remove routine.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds hardware initialization routine to be
invoked at driver's .probe routine.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds the basic code of FUJITSU Extended Socket
Network Device driver.

When "PNP0C02" is found in ACPI DSDT, it evaluates "_STR"
to check if "PNP0C02" is for Extended Socket device driver
and retrieves ACPI resource information. Then creates
platform_device.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This BQL patch is based on work done by Tino Reichardt.

Tested on 0000:05:00.0: 3Com PCI 3c905C Tornado at ffffc90000e6e000 by running
Flent several times.
Signed-off-by: NLoganaden Velvindron <logan@elandsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Tom Herbert says:

====================
ila: Precompute checksums

This patch set:
 - Adds argument ot LWT build_state that holds a pointer to the fib
   configuration being applied to the new route
 - Adds support in ILA to precompute checksum difference for
   performance optimization

v2:
 - Move return argument in build_state to end of arguments

v3:
 - Update the signature for ip6_tun_build_state()
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the ILA build state for LWT compute the checksum difference to apply
to transport checksums that include the IPv6 pseudo header. The
difference is between the route destination (from fib6_config) and the
locator to write.
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add cfg and family arguments to lwt build state functions. cfg is a void
pointer and will either be a pointer to a fib_config or fib6_config
structure. The family parameter indicates which one (either AF_INET
or AF_INET6).

LWT encpasulation implementation may use the fib configuration to build
the LWT state.
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

By implementing config_intr & ack_interrupt, now the phy can support
link connect/disconnect interrupt.
Signed-off-by: NShaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Samuel Ortiz says:

====================
NFC 4.3 pull request

This is the NFC pull request for 4.3.
With this one we have:

- A new driver for Samsung's S3FWRN5 NFC chipset. In order to
  properly support this driver, a few NCI core routines needed
  to be exported. Future drivers like Intel's Fields Peak will
  benefit from this.

- SPI support as a physical transport for STM st21nfcb.

- An additional netlink API for sending replies back to userspace
  from vendor commands.

- 2 small fixes for TI's trf7970a

- A few st-nci fixes.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

__recnt and related fields need to be in its own cacheline for performance
reasons. Commit 61adedf3 ("route: move lwtunnel state to dst_entry")
broke that on 32bit archs, causing BUILD_BUG_ON in dst_hold to be triggered.

This patch fixes the breakage by moving the lwtunnel state to the end of
dst_entry on 32bit archs. Unfortunately, this makes it share the cacheline
with __refcnt and may affect performance, thus further patches may be
needed.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Fixes: 61adedf3 ("route: move lwtunnel state to dst_entry")
Signed-off-by: NJiri Benc <jbenc@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'linux-can-next-for-4.3-20150820' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
this is a pull request of a two patches for net-next.

The first patch is by Nik Nyby and fixes a typo in a function name. The
second patch by Lucas Stach demotes register output to debug level.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jon Maloy says:

====================
tipc: fix link failover/synch problems

We fix three problems with the new link failover/synch implementation,
which was introduced earlier in this release cycle. They are all related
to situations where there is a very short interval between the disabling
and enabling of interfaces.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Recent changes to the link synchronization means that we can now just
drop packets arriving on the synchronizing link before the synch point
is reached. This has lead to significant simplifications to the
implementation, but also turns out to have a flip side that we need
to consider.

Under unlucky circumstances, the two endpoints may end up
repeatedly dropping each other's packets, while immediately
asking for retransmission of the same packets, just to drop
them once more. This pattern will eventually be broken when
the synch point is reached on the other link, but before that,
the endpoints may have arrived at the retransmission limit
(stale counter) that indicates that the link should be broken.
We see this happen at rare occasions.

The fix for this is to not ask for retransmissions when a link is in
state LINK_SYNCHING. The fact that the link has reached this state
means that it has already received the first SYNCH packet, and that it
knows the synch point. Hence, it doesn't need any more packets until the
other link has reached the synch point, whereafter it can go ahead and
ask for the missing packets.

However, because of the reduced traffic on the synching link that
follows this change, it may now take longer to discover that the
synch point has been reached. We compensate for this by letting all
packets, on any of the links, trig a check for synchronization
termination. This is possible because the packets themselves don't
contain any information that is needed for discovering this condition.
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When we introduced the new link failover/synch mechanism
in commit 6e498158
("tipc: move link synch and failover to link aggregation level"),
we missed the case when the non-tunnel link goes down during the link
synchronization period. In this case the tunnel link will remain in
state LINK_SYNCHING, something leading to unpredictable behavior when
the failover procedure is initiated.

In this commit, we ensure that the node and remaining link goes
back to regular communication state (SELF_UP_PEER_UP/LINK_ESTABLISHED)
when one of the parallel links goes down. We also ensure that we don't
re-enter synch mode if subsequent SYNCH packets arrive on the remaining
link.
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>