This adds support for the touchscreen on Samsung s3c64xx.
The driver is completely untested but shows roughly how
it could be done, following the example of the at91 driver.

compared to the old plat-samsung/adc driver, there is
no support for prioritizing ts over other clients, nor
for oversampling. From my reading of the code, the
priorities didn't actually have any effect at all, but
the oversampling might be needed.

Verifying this driver is the main issue that is currently
holding up multiplatform support for s3c64xx, so any help
in testing is very much appreciated.

The current version uses the IS_REACHABLE() that is
going to be introduced in the linux-media tree, please
comment this out for testing.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This patchset attempts to new compatible for thermal founding
on RK3368 SoCs.
Signed-off-by: NCaesar Wang <wxt@rock-chips.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

Xilfpga boots only with device-tree. Document the required properties
and the unique boot style
Signed-off-by: NZubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: robh+dt@kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11361/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRaphaël Poggi <poggi.raph@gmail.com>
Signed-off-by: NRob Herring <robh@kernel.org>

The compatible should be "renesas,pwm-rcar", and one the the SoC
specific string. So, this patch revises the documentation.
Reported-by: NRob Herring <robh+dt@kernel.org>
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NThierry Reding <thierry.reding@gmail.com>

The PWM controller on sun5i SoCs is identical to the one found on sun7i
SoCs. On the A13 package only one of the 2 pins is routed to the outside,
so only advertise one PWM channel there.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NThierry Reding <thierry.reding@gmail.com>

This change turns the UFS variant (SCSI_UFS_QCOM) into a UFS
a platform device.
In order to do so a few additional changes are required:
1. The ufshcd-pltfrm is no longer serves as a platform device.
   Now it only serves as a group of platform APIs such as PM APIs
   (runtime suspend/resume, system suspend/resume etc), parsers of
   clocks, regulators and pm_levels from DT.
2. What used to be the old platform "probe" is now "only"
   a pltfrm_init() routine, that does exactly the same, but only
   being called by the new probe function of the UFS variant.
Reviewed-by: NRob Herring <robherring2@gmail.com>
Reviewed-by: NGilad Broner <gbroner@codeaurora.org>
Signed-off-by: NYaniv Gardi <ygardi@codeaurora.org>
Tested-by: NAlim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add the clkout output clk to the common clock framework.
Disable the CLKOUT of the RTC after power-up.
After power-up/reset of the RTC, CLKOUT is enabled by default,
with CLKOUT enabled the RTC chip has 2-3 times higher power
consumption.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

Introduce a device tree binding for specifying the trickle charger
configuration for ds1390.
Signed-off-by: NIvan Grimaldi <grimaldi.ivan@gmail.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

Add support for a fixed-link devicetree sub-node in case the the
cpsw MAC is directly connected to a non-mdio PHY/device.
Signed-off-by: NMarkus Brunner <systemprogrammierung.brunner@gmail.com>
Acked-by: NMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds support for the i2c based tsc2004 touchscreen controller.
Signed-off-by: NMichael Welling <mwelling@ieee.org>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The "init" pinctrl is defined we'll set
pinctrl to this state before probe and then "default" after probe.
Add the "init" and "sleep" pinctrl as the OTP gpio state, since we need
switch the pin to gpio state before the TSADC controller is reset.

AFAIK, the TSADC controller is reset, the tshut polarity will be
a *low* signal in a short period of time for some devices.

Says:
The TSADC get the temperature on rockchip thermal.

If T(current temperature) < (setting temperature), the OTP output the
*high* signal.
If T(current temperature) > (setting temperature), the OTP output the
*low* Signal.

In some cases, the OTP pin is connected to the PMIC, maybe the
PMIC can accept the reset response time to avoid this issue.

In other words, the system will be always reboot if we make the
OTP pin is connected the others IC to control the power.
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NCaesar Wang <wxt@rock-chips.com>
Reviewed-by: NDouglas Anderson <dianders@chromium.org>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

Add Altera PCIe MSI driver.  This soft IP supports a configurable number of
vectors, which is a DTS parameter.

[bhelgaas: Kconfig depend on PCIE_ALTERA, typos, whitespace]
Signed-off-by: NLey Foon Tan <lftan@altera.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NRob Herring <robh@kernel.org>

flash-timeout-us property name is changed to flash-max-timeout-us.
This patch fixes that name.
Signed-off-by: NIngi Kim <ingi2.kim@samsung.com>
Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com>

This patch adds latest DT bindings for leds-bcm6328 init register
configuration.
Signed-off-by: NÁlvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com>

This patch adds device tree support for the netxbig LEDs.

This also introduces a additionnal DT binding for the GPIO extension bus
(netxbig-gpio-ext) used to configure the LEDs. Since this bus could also
be used to control other devices, then it seems more suitable to have it
in a separate DT binding.
Signed-off-by: NSimon Guinot <simon.guinot@sequanux.org>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com>

Add PCIe host support for HiSilicon SoC Hip05, related DT binding
documentation, and maintainer update.

[bhelgaas: changelog, 32-bit only config write warning text]
Signed-off-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NGabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Nliudongdong <liudongdong3@huawei.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org> (DT binding)

Both LS1043a and LS2080a are based on ARMv8 64-bit architecture and have
similar PCIe implementation.  LUT is added to controller.

Add LS1043a and LS2080a support.

[bhelgaas: move unused field removal into separate patch, include DT update]
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> (DT update)
Signed-off-by: NMinghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de> (DT update)

Move the clock-related properties in the DesignWare PCIe controller
bindings to 'optional' set of properties.

[bhelgaas: move to separate patch]
Signed-off-by: NBhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

Currently "num-lanes" is read in dw_pcie_host_init(), but it is only used
if we call dw_pcie_setup_rc() while bringing up the link.  If the link has
already been brought up by firmware, we need not call dw_pcie_setup_rc(),
and "num-lanes" is unnecessary.

Only complain about "num-lanes" if we actually need it and we didn't find a
valid value.

[bhelgaas: changelog]
Signed-off-by: NGabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Add the "sigma" vendor prefix for Sigma Designs, Inc.
Signed-off-by: NMans Rullgard <mans@mansr.com>
Signed-off-by: NRob Herring <robh@kernel.org>

There are a bunch of drivers that utilize the "ngpios" DT property
without any vendor prefix. Try to start cleaning up the mess by
defining what we mean by this property.

Cc: devicetree@vger.kernel.org
Cc: Pramod Kumar <pramodku@broadcom.com>
Cc: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

There is a few typos in Freescale QorIQ AHCI bindings, This
patch fixes them.
Signed-off-by: NTang Yuantian <Yuantian.Tang@freescale.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Freescale is renaming the LS2085A SoC to LS2080A.
This patch addresses the same.
Signed-off-by: NTang Yuantian <Yuantian.Tang@freescale.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

To avoid conflict with other drivers using subnodes of the mtd device
create only one ofpart-specific node rather than any number of
arbitrary partition subnodes.
Signed-off-by: NMichal Suchanek <hramrach@gmail.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>

Add dt-binding documentation for s2mps15 PMIC device. The s2mps15 device
is similar to s2mps11/14 PMIC device and has 27 LDO and 10 buck regulators.
This also supports RTC and three 32.768KHz clock outputs.
Signed-off-by: NThomas Abraham <thomas.ab@samsung.com>
Signed-off-by: NAlim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Subsystem specific bindings for the Arizona devices are being factored
out of the MFD binding document into separate documents for each
subsystem. This patch adds a binding document that covers the existing
extcon specific bindings.
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Binding documentation has been added in new subsystem specific binding
documents. This patch removes the now duplicate documentation from the
MFD documentation.
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Default the brightness to 2048 and add possibility to override this in
device tree.
Suggested-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@sonymobile.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Addresses should not be prefixed contain '0x' in nodes.
Signed-off-by: NMoritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: NRob Herring <robh@kernel.org>

This patch marks all the reference to the legacy wakeup bindings
and replaces them with the standard "wakeup-source" property.

All these legacy property are also listed under a separate section in
the generic wakeup-source binding document.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Signed-off-by: NSudeep Holla <sudeep.holla@arm.com>
Signed-off-by: NRob Herring <robh@kernel.org>

Currently different drivers use multiple forms of annotating devices
that should be set up as wakeup sources for the system.

This patch adds a separate binding document inorder to standardize and
consolidate to use "wakeup-source" boolean property to mark the devices
as wakeup capable.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Signed-off-by: NSudeep Holla <sudeep.holla@arm.com>
Signed-off-by: NRob Herring <robh@kernel.org>

Document a new Device Tree property 'samsung,s2mps11-wrstbi-ground'
indicating that WRSTBI pin of S2MPS13 PMIC is pulled down so
corresponding buck warm reset function should be disabled.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This patch documents the DT bindings for the Atmel Flexcom which will be
introduced by sama5d2x SoCs. These bindings will be used by the actual
Flexcom driver to be sent in another patch.
Signed-off-by: NCyrille Pitchen <cyrille.pitchen@atmel.com>
Acked-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Some EC implementations include a small nvram space used to store
verified boot context data. This boolean property lets us indicate
whether this space is available or not on a specific EC implementation.
Signed-off-by: NEmilio López <emilio.lopez@collabora.co.uk>
Reviewed-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Signed-off-by: NIyappan Subramanian <isubramanian@apm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

updates the bindings documents and dtsi file according to the review
comments[https://lkml.org/lkml/2015/9/21/670] from Rob Herring <robh@kernel.org>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: Nyankejian <yankejian@huawei.com>
Signed-off-by: Nhuangdaode <huangdaode@hisilicon.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Subsystem specific bindings for the Arizona devices are being factored
out of the MFD binding document into separate documents for each
subsystem. This patch adds a binding document that covers the existing
regulator specific bindings.
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The SMP release mechanism for FSL book3e is different from when booting
with normal hardware.  In theory we could simulate the normal spin
table mechanism, but not at the addresses U-Boot put in the device tree
-- so there'd need to be even more communication between the kernel and
kexec to set that up.  Instead, kexec-tools will set a boolean property
linux,booted-from-kexec in the /chosen node.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Cc: devicetree@vger.kernel.org

HW and driver support the GPIO as interrupt-controller.
Document that in the DT binding.
Signed-off-by: NSoren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>