Pull btrfs fixes from Chris Mason:
 "This has two last minute fixes. The highest priority here is a
  regression fix for the decompression code, but we also fixed up a
  problem with the 32-bit compat ioctls.

  The decompression bug could hand back the wrong data on big reads when
  zlib was used. I have a larger cleanup to make the math here less
  error prone, but at this stage in the release Omar's patch is the best
  choice"

* 'for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  btrfs: fix btrfs_decompress_buf2page()
  btrfs: fix btrfs_compat_ioctl failures on non-compat ioctls

Pull SCSI fixes from James Bottomley:
 "Six fairly small fixes. None is a real show stopper, two automation
  detected problems: one memory leak, one use after free and four others
  each of which fixes something that has been a significant source of
  annoyance to someone"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: zfcp: fix use-after-free by not tracing WKA port open/close on failed send
  scsi: aacraid: Fix INTx/MSI-x issue with older controllers
  scsi: mpt3sas: disable ASPM for MPI2 controllers
  scsi: mpt3sas: Force request partial completion alignment
  scsi: qla2xxx: Avoid that issuing a LIP triggers a kernel crash
  scsi: qla2xxx: Fix a recently introduced memory leak

If btrfs_decompress_buf2page() is handed a bio with its page in the
middle of the working buffer, then we adjust the offset into the working
buffer. After we copy into the bio, we advance the iterator by the
number of bytes we copied. Then, we have some logic to handle the case
of discontiguous pages and adjust the offset into the working buffer
again. However, if we didn't advance the bio to a new page, we may enter
this case in error, essentially repeating the adjustment that we already
made when we entered the function. The end result is bogus data in the
bio.

Previously, we only checked for this case when we advanced to a new
page, but the conversion to bio iterators changed that. This restores
the old, correct behavior.

A case I saw when testing with zlib was:

    buf_start = 42769
    total_out = 46865
    working_bytes = total_out - buf_start = 4096
    start_byte = 45056

The condition (total_out > start_byte && buf_start < start_byte) is
true, so we adjust the offset:

    buf_offset = start_byte - buf_start = 2287
    working_bytes -= buf_offset = 1809
    current_buf_start = buf_start = 42769

Then, we copy

    bytes = min(bvec.bv_len, PAGE_SIZE - buf_offset, working_bytes) = 1809
    buf_offset += bytes = 4096
    working_bytes -= bytes = 0
    current_buf_start += bytes = 44578

After bio_advance(), we are still in the same page, so start_byte is the
same. Then, we check (total_out > start_byte && current_buf_start < start_byte),
which is true! So, we adjust the values again:

    buf_offset = start_byte - buf_start = 2287
    working_bytes = total_out - start_byte = 1809
    current_buf_start = buf_start + buf_offset = 45056

But note that working_bytes was already zero before this, so we should
have stopped copying.

Fixes: 974b1adc ("btrfs: use bio iterators for the decompression handlers")
Reported-by: NPat Erley <pat-lkml@erley.org>
Reviewed-by: NChris Mason <clm@fb.com>
Signed-off-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Tested-by: NLiu Bo <bo.li.liu@oracle.com>

Pull networking fixes from David Miller:

 1) If the timing is wrong we can indefinitely stop generating new ipv6
    temporary addresses, from Marcus Huewe.

 2) Don't double free per-cpu stats in ipv6 SIT tunnel driver, from Cong
    Wang.

 3) Put protections in place so that AF_PACKET is not able to submit
    packets which don't even have a link level header to drivers. From
    Willem de Bruijn.

 4) Fix memory leaks in ipv4 and ipv6 multicast code, from Hangbin Liu.

 5) Don't use udp_ioctl() in l2tp code, UDP version expects a UDP socket
    and that doesn't go over very well when it is passed an L2TP one.
    Fix from Eric Dumazet.

 6) Don't crash on NULL pointer in phy_attach_direct(), from Florian
    Fainelli.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  l2tp: do not use udp_ioctl()
  xen-netfront: Delete rx_refill_timer in xennet_disconnect_backend()
  NET: mkiss: Fix panic
  net: hns: Fix the device being used for dma mapping during TX
  net: phy: Initialize mdio clock at probe function
  igmp, mld: Fix memory leak in igmpv3/mld_del_delrec()
  xen-netfront: Improve error handling during initialization
  sierra_net: Skip validating irrelevant fields for IDLE LSIs
  sierra_net: Add support for IPv6 and Dual-Stack Link Sense Indications
  kcm: fix 0-length case for kcm_sendmsg()
  xen-netfront: Rework the fix for Rx stall during OOM and network stress
  net: phy: Fix PHY module checks and NULL deref in phy_attach_direct()
  net: thunderx: Fix PHY autoneg for SGMII QLM mode
  net: dsa: Do not destroy invalid network devices
  ping: fix a null pointer dereference
  packet: round up linear to header len
  net: introduce device min_header_len
  sit: fix a double free on error path
  lwtunnel: valid encap attr check should return 0 when lwtunnel is disabled
  ipv6: addrconf: fix generation of new temporary addresses

Pull rdma fixes from Doug Ledford:
 "Third round of -rc fixes for 4.10 kernel:

   - two security related issues in the rxe driver

   - one compile issue in the RDMA uapi header"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  RDMA: Don't reference kernel private header from UAPI header
  IB/rxe: Fix mem_check_range integer overflow
  IB/rxe: Fix resid update

Pull i2c bugfixes from Wolfram Sang:
 "Two bugfixes (proper IO mapping and use of mutex) for a driver feature
  we introduced in this cycle"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: piix4: Request the SMBUS semaphore inside the mutex
  i2c: piix4: Fix request_region size

Pull MMC host fix from Ulf Hansson:
 "mmci: Fix hang while waiting for busy-end interrupt"

* tag 'mmc-v4.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: mmci: avoid clearing ST Micro busy end interrupt mistakenly

Pull sound fixes from Takashi Iwai:
 "Here are some last-minute fixes: two fixes for races in ALSA sequencer
  queue spotted by syzkaller, a revert for a regression of LINE6 driver
  (since 4.9), and a trivial new codec ID addition for Nvidia HDMI"

* tag 'sound-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - adding a new NV HDMI/DP codec ID in the driver
  ALSA: seq: Fix race at creating a queue
  Revert "ALSA: line6: Only determine control port properties if needed"
  ALSA: seq: Don't handle loop timeout at snd_seq_pool_done()

Pull nfsd revert from Bruce Fields:
 "This patch turned out to have a couple problems. The problems are
  fixable, but at least one of the fixes is a little ugly. The original
  bug has always been there, so we can wait another week or two to get
  this right"

* tag 'nfsd-4.10-3' of git://linux-nfs.org/~bfields/linux:
  nfsd: Revert "nfsd: special case truncates some more"

Pull powerpc fixes friom Michael Ellerman:
 "Apologies for the late pull request, but Ben has been busy finding bugs.

   - Userspace was semi-randomly segfaulting on radix due to us
     incorrectly handling a fault triggered by autonuma, caused by a
     patch we merged earlier in v4.10 to prevent the kernel executing
     userspace.

   - We weren't marking host IPIs properly for KVM in the OPAL ICP
     backend.

   - The ERAT flushing on radix was missing an isync and was incorrectly
     marked as DD1 only.

   - The powernv CPU hotplug code was missing a wakeup type and failing
     to flush the interrupt correctly when using OPAL ICP

  Thanks to Benjamin Herrenschmidt"

* tag 'powerpc-4.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/powernv: Properly set "host-ipi" on IPIs
  powerpc/powernv: Fix CPU hotplug to handle waking on HVI
  powerpc/mm/radix: Update ERAT flushes when invalidating TLB
  powerpc/mm: Fix spurrious segfaults on radix with autonuma

udp_ioctl(), as its name suggests, is used by UDP protocols,
but is also used by L2TP :(

L2TP should use its own handler, because it really does not
look the same.

SIOCINQ for instance should not assume UDP checksum or headers.

Thanks to Andrey and syzkaller team for providing the report
and a nice reproducer.

While crashes only happen on recent kernels (after commit
7c13f97f ("udp: do fwd memory scheduling on dequeue")), this
probably needs to be backported to older kernels.

Fixes: 7c13f97f ("udp: do fwd memory scheduling on dequeue")
Fixes: 85584672 ("udp: Fix udp_poll() and ioctl()")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NAndrey Konovalov <andreyknvl@google.com>
Acked-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branch 'for-chris' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.10

rx_refill_timer should be deleted as soon as we disconnect from the
backend since otherwise it is possible for the timer to go off before
we get to xennet_destroy_queues(). If this happens we may dereference
queue->rx.sring which is set to NULL in xennet_disconnect_backend().
Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
CC: stable@vger.kernel.org
Reviewed-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If a USB-to-serial adapter is unplugged, the driver re-initializes, with
dev->hard_header_len and dev->addr_len set to zero, instead of the correct
values.  If then a packet is sent through the half-dead interface, the
kernel will panic due to running out of headroom in the skb when pushing
for the AX.25 headers resulting in this panic:

[<c0595468>] (skb_panic) from [<c0401f70>] (skb_push+0x4c/0x50)
[<c0401f70>] (skb_push) from [<bf0bdad4>] (ax25_hard_header+0x34/0xf4 [ax25])
[<bf0bdad4>] (ax25_hard_header [ax25]) from [<bf0d05d4>] (ax_header+0x38/0x40 [mkiss])
[<bf0d05d4>] (ax_header [mkiss]) from [<c041b584>] (neigh_compat_output+0x8c/0xd8)
[<c041b584>] (neigh_compat_output) from [<c043e7a8>] (ip_finish_output+0x2a0/0x914)
[<c043e7a8>] (ip_finish_output) from [<c043f948>] (ip_output+0xd8/0xf0)
[<c043f948>] (ip_output) from [<c043f04c>] (ip_local_out_sk+0x44/0x48)

This patch makes mkiss behave like the 6pack driver. 6pack does not
panic.  In 6pack.c sp_setup() (same function name here) the values for
dev->hard_header_len and dev->addr_len are set to the same values as in
my mkiss patch.

[ralf@linux-mips.org: Massages original submission to conform to the usual
standards for patch submissions.]
Signed-off-by: NThomas Osterried <thomas@osterried.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes the device being used to DMA map skb->data.
Erroneous device assignment causes the crash when SMMU is enabled.
This happens during TX since buffer gets DMA mapped with device
correspondign to net_device and gets unmapped using the device
related to DSAF.
Signed-off-by: NKejian Yan <yankejian@huawei.com>
Reviewed-by: NYisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch incorrectly attempted nested mnt_want_write, and incorrectly
disabled nfsd's owner override for truncate.  We'll fix those problems
and make another attempt soon, for the moment I think the safest is to
revert.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Pull drm fixes from Dave Airlie:
 "This should be the final set of drm fixes for 4.10: one vmwgfx boot
  fix, one vc4 fix, and a few i915 fixes:

* tag 'drm-fixes-for-v4.10-rc8' of git://people.freedesktop.org/~airlied/linux:
  drm: vc4: adapt to new behaviour of drm_crtc.c
  drm/i915: Always convert incoming exec offsets to non-canonical
  drm/i915: Remove overzealous fence warn on runtime suspend
  drm/i915/bxt: Add MST support when do DPLL calculation
  drm/i915: don't warn about Skylake CPU - KabyPoint PCH combo
  drm/i915: fix i915 running as dom0 under Xen
  drm/i915: Flush untouched framebuffers before display on !llc
  drm/i915: fix use-after-free in page_flip_completed()
  drm/vmwgfx: Fix depth input into drm_mode_legacy_fb_format

Dan Carpenter kindly reported:
<quote>
The patch d27a7cb9: "zfcp: trace on request for open and close of
WKA port" from Aug 10, 2016, leads to the following static checker
warning:

	drivers/s390/scsi/zfcp_fsf.c:1615 zfcp_fsf_open_wka_port()
	warn: 'req' was already freed.

drivers/s390/scsi/zfcp_fsf.c
  1609          zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
  1610          retval = zfcp_fsf_req_send(req);
  1611          if (retval)
  1612                  zfcp_fsf_req_free(req);
                                          ^^^
Freed.

  1613  out:
  1614          spin_unlock_irq(&qdio->req_q_lock);
  1615          if (req && !IS_ERR(req))
  1616                  zfcp_dbf_rec_run_wka("fsowp_1", wka_port, req->req_id);
                                                                  ^^^^^^^^^^^
Use after free.

  1617          return retval;
  1618  }

Same thing for zfcp_fsf_close_wka_port() as well.
</quote>

Rather than relying on req being NULL (or ERR_PTR) for all cases where
we don't want to trace or should not trace,
simply check retval which is unconditionally initialized with -EIO != 0
and it can only become 0 on successful retval = zfcp_fsf_req_send(req).
With that we can also remove the then again unnecessary unconditional
initialization of req which was introduced with that earlier commit.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Suggested-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NSteffen Maier <maier@linux.vnet.ibm.com>
Fixes: d27a7cb9 ("zfcp: trace on request for open and close of WKA port")
Cc: <stable@vger.kernel.org> #2.6.38+
Reviewed-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: NJens Remus <jremus@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

commit 78cbccd3 ("aacraid: Fix for KDUMP driver hang")

caused a problem on older controllers which do not support MSI-x (namely
ASR3405,ASR3805). This patch conditionalizes the previous patch to
controllers which support MSI-x

Cc: <stable@vger.kernel.org> # v4.7+
Fixes: 78cbccd3 ("aacraid: Fix for KDUMP driver hang")
Reported-by: NArkadiusz Miskiewicz <a.miskiewicz@gmail.com>
Signed-off-by: NDave Carroll <david.carroll@microsemi.com>
Reviewed-by: NRaghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Merge tag 'drm-intel-fixes-2017-02-09' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes

Hopefully final fixes for v4.10, about half of them stable material.

* tag 'drm-intel-fixes-2017-02-09' of git://anongit.freedesktop.org/git/drm-intel:
  drm/i915: Always convert incoming exec offsets to non-canonical
  drm/i915: Remove overzealous fence warn on runtime suspend
  drm/i915/bxt: Add MST support when do DPLL calculation
  drm/i915: don't warn about Skylake CPU - KabyPoint PCH combo
  drm/i915: fix i915 running as dom0 under Xen
  drm/i915: Flush untouched framebuffers before display on !llc
  drm/i915: fix use-after-free in page_flip_completed()

Last-minute vc4 fix for 4.10.

* tag 'drm-misc-fixes-2017-02-09' of git://anongit.freedesktop.org/git/drm-misc:
  drm: vc4: adapt to new behaviour of drm_crtc.c

MPI2 controllers sometimes got lost (i.e. disappear from
/sys/bus/pci/devices) if ASMP is enabled.
Signed-off-by: NSlava Kardakov <ojab@ojab.ru>
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=60644
Cc: <stable@vger.kernel.org>
Acked-by: NSreekanth Reddy <Sreekanth.Reddy@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

USB PHYs need the MDIO clock divisor enabled earlier to work.
Initialize mdio clock divisor in probe function. The ext bus
bit available in the same register will be used by mdio mux
to enable external mdio.
Signed-off-by: NYendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Fixes: ddc24ae1 ("net: phy: Broadcom iProc MDIO bus driver")
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NJon Mason <jon.mason@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In function igmpv3/mld_add_delrec() we allocate pmc and put it in
idev->mc_tomb, so we should free it when we don't need it in del_delrec().
But I removed kfree(pmc) incorrectly in latest two patches. Now fix it.

Fixes: 24803f38 ("igmp: do not remove igmp souce list info when ...")
Fixes: 1666d49e ("mld: do not remove mld souce list info when ...")
Reported-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes a crash when running out of grant refs when creating many
queues across many netdevs.

* If creating queues fails (i.e. there are no grant refs available),
call xenbus_dev_fatal() to ensure that the xenbus device is set to the
closed state.
* If no queues are created, don't call xennet_disconnect_backend as
netdev->real_num_tx_queues will not have been set correctly.
* If setup_netfront() fails, ensure that all the queues created are
cleaned up, not just those that have been set up.
* If any queues were set up and an error occurs, call
xennet_destroy_queues() to clean up the napi context.
* If any fatal error occurs, unregister and destroy the netdev to avoid
leaving around a half setup network device.
Signed-off-by: NRoss Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Stefan Brüns says:

====================
Fixes for sierra_net driver

When trying to initiate a dual-stack (ipv4v6) connection, a MC7710, FW
version SWI9200X_03.05.24.00ap answers with an unsupported LSI. Add support
for this LSI.
Also the link_type should be ignored when going idle, otherwise the modem
is stuck in a bad link state.
Tested on MC7710, T-Mobile DE, APN internet.telekom, IPv4v6 PDP type. Both
IPv4 and IPv6 connections work.

v2: Do not overwrite protocol field in rx_fixup
v3: Remove leftover struct ethhdr *eth declaration
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the context is deactivated, the link_type is set to 0xff, which
triggers a warning message, and results in a wrong link status, as
the LSI is ignored.
Signed-off-by: NStefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If a context is configured as dualstack ("IPv4v6"), the modem indicates
the context activation with a slightly different indication message.
The dual-stack indication omits the link_type (IPv4/v6) and adds
additional address fields.
IPv6 LSIs are identical to IPv4 LSIs, but have a different link type.
Signed-off-by: NStefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Dmitry reported a kernel warning:

 WARNING: CPU: 3 PID: 2936 at net/kcm/kcmsock.c:627
 kcm_write_msgs+0x12e3/0x1b90 net/kcm/kcmsock.c:627
 CPU: 3 PID: 2936 Comm: a.out Not tainted 4.10.0-rc6+ #209
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
 Call Trace:
  __dump_stack lib/dump_stack.c:15 [inline]
  dump_stack+0x2ee/0x3ef lib/dump_stack.c:51
  panic+0x1fb/0x412 kernel/panic.c:179
  __warn+0x1c4/0x1e0 kernel/panic.c:539
  warn_slowpath_null+0x2c/0x40 kernel/panic.c:582
  kcm_write_msgs+0x12e3/0x1b90 net/kcm/kcmsock.c:627
  kcm_sendmsg+0x163a/0x2200 net/kcm/kcmsock.c:1029
  sock_sendmsg_nosec net/socket.c:635 [inline]
  sock_sendmsg+0xca/0x110 net/socket.c:645
  sock_write_iter+0x326/0x600 net/socket.c:848
  new_sync_write fs/read_write.c:499 [inline]
  __vfs_write+0x483/0x740 fs/read_write.c:512
  vfs_write+0x187/0x530 fs/read_write.c:560
  SYSC_write fs/read_write.c:607 [inline]
  SyS_write+0xfb/0x230 fs/read_write.c:599
  entry_SYSCALL_64_fastpath+0x1f/0xc2

when calling syscall(__NR_write, sock2, 0x208aaf27ul, 0x0ul) on a KCM
seqpacket socket. It appears that kcm_sendmsg() does not handle len==0
case correctly, which causes an empty skb is allocated and queued.
Fix this by skipping the skb allocation for len==0 case.
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The commit 90c311b0 ("xen-netfront: Fix Rx stall during network
stress and OOM") caused the refill timer to be triggerred almost on
all invocations of xennet_alloc_rx_buffers for certain workloads.
This reworks the fix by reverting to the old behaviour and taking into
consideration the skb allocation failure. Refill timer is now triggered
on insufficient requests or skb allocation failure.
Signed-off-by: NVineeth Remanan Pillai <vineethp@amazon.com>
Fixes: 90c311b0 (xen-netfront: Fix Rx stall during network stress and OOM)
Reported-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull SCSI target fixes from Nicholas Bellinger:
 "This target series for v4.10 contains fixes which address a few
  long-standing bugs that DATERA's QA + automation teams have uncovered
  while putting v4.1.y target code into production usage.

  We've been running the top three in our nightly automated regression
  runs for the last two months, and the COMPARE_AND_WRITE fix Mr. Gary
  Guo has been manually verifying against a four node ESX cluster this
  past week.

  Note all of them have CC' stable tags.

  Summary:

   - Fix a bug with ESX EXTENDED_COPY + SAM_STAT_RESERVATION_CONFLICT
     status, where target_core_xcopy.c logic was incorrectly returning
     SAM_STAT_CHECK_CONDITION for all non SAM_STAT_GOOD cases (Nixon
     Vincent)

   - Fix a TMR LUN_RESET hung task bug while other in-flight TMRs are
     being aborted, before the new one had been dispatched into tmr_wq
     (Rob Millner)

   - Fix a long standing double free OOPs, where a dynamically generated
     'demo-mode' NodeACL has multiple sessions associated with it, and
     the /sys/kernel/config/target/$FABRIC/$WWN/ subsequently disables
     demo-mode, but never converts the dynamic ACL into a explicit ACL
     (Rob Millner)

   - Fix a long standing reference leak with ESX VAAI COMPARE_AND_WRITE
     when the second phase WRITE COMMIT command fails, resulting in
     CHECK_CONDITION response never being sent and se_cmd->cmd_kref
     never reaching zero (Gary Guo)

  Beyond these items on v4.1.y we've reproduced, fixed, and run through
  our regression test suite using iscsi-target exports, there are two
  additional outstanding list items:

   - Remove a >= v4.2 RCU conversion BUG_ON that would trigger when
     dynamic node NodeACLs where being converted to explicit NodeACLs.
     The patch drops the BUG_ON to follow how pre RCU conversion worked
     for this special case (Benjamin Estrabaud)

   - Add ibmvscsis target_core_fabric_ops->max_data_sg_nent assignment
     to match what IBM's Virtual SCSI hypervisor is already enforcing at
     transport layer. (Bryant Ly + Steven Royer)"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  ibmvscsis: Add SGL limit
  target: Fix COMPARE_AND_WRITE ref leak for non GOOD status
  target: Fix multi-session dynamic se_node_acl double free OOPs
  target: Fix early transport_generic_handle_tmr abort scenario
  target: Use correct SCSI status during EXTENDED_COPY exception
  target: Don't BUG_ON during NodeACL dynamic -> explicit conversion

The Generic PHY drivers gets assigned after we checked that the current
PHY driver is NULL, so we need to check a few things before we can
safely dereference d->driver. This would be causing a NULL deference to
occur when a system binds to the Generic PHY driver. Update
phy_attach_direct() to do the following:

- grab the driver module reference after we have assigned the Generic
  PHY drivers accordingly, and remember we came from the generic PHY
  path

- update the error path to clean up the module reference in case the
  Generic PHY probe function fails

- split the error path involving phy_detacht() to avoid double free/put
  since phy_detach() does all the clean up

- finally, have phy_detach() drop the module reference count before we
  call device_release_driver() for the Generic PHY driver case

Fixes: cafe8df8 ("net: phy: Fix lack of reference count on PHY driver")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull pstore fix from Kees Cook:
 "Fix pstore regression (boot Oops) when ftrace disabled, from Brian
  Norris"

* tag 'pstore-v4.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore: don't OOPS when there are no ftrace zones

Pull input fixes from Dmitry Torokhov:
 "A fix for a crash in uinput, and a fix for build errors when HID-RMI
  is built-in but SERIO is a module"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics-rmi4 - select 'SERIO' when needed
  Input: uinput - fix crash when mixing old and new init style

We'll OOPS in ramoops_get_next_prz() if the platform didn't ask for any
ftrace zones (i.e., cxt->fprzs will be NULL). Let's just skip this
entire FTRACE section if there's no 'fprzs'.

Regression seen on a coreboot/depthcharge-based Chromebook.

Fixes: 2fbea82b ("pstore: Merge per-CPU ftrace records into one")
Cc: Joel Fernandes <joelaf@google.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: NBrian Norris <briannorris@chromium.org>
Signed-off-by: NKees Cook <keescook@chromium.org>

Pull VFIO fix from Alex Williamson:
 "Fix regression in attaching groups to existing container for SPAPR
  IOMMU backend (Alexey Kardashevskiy)"

* tag 'vfio-v4.10-final' of git://github.com/awilliam/linux-vfio:
  vfio/spapr_tce: Set window when adding additional groups to container

Pull ARM fixes from Russell King:
 "A couple more fixes for 4.10:

   - fix addressing the short regset write issue (Dave Martin)

   - fix for LPAE systems which leave a pending imprecise data abort
     before entering the kernel (Alexander Sverdlin)"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8643/3: arm/ptrace: Preserve previous registers for short regset write
  ARM: 8642/1: LPAE: catch pending imprecise abort on unmask

SMBSLVCNT must be protected with the piix4_mutex_sb800 in order to avoid
multiple buses accessing to the semaphore at the same time.

Fixes: 701dc207 ("i2c: piix4: Avoid race conditions with IMC")
Reported-by: NJean Delvare <jdelvare@suse.de>
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Since '701dc207 ("i2c: piix4: Avoid race conditions with IMC")' we
are using the SMBSLVCNT register at offset 0x8. We need to request it.

Fixes: 701dc207 ("i2c: piix4: Avoid race conditions with IMC")
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>